Kishon Vijay Abraham I 2022270c7d ARM: OMAP5: set mmc clock frequency to 192MHz ... Now that omap_hsmmc has support for hs200 mode, change the clock frequency to 192MHz. Also change the REFERENCE CLOCK frequency to 192MHz based on which the internal mmc clock divider is calculated. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>		2018-02-19 16:58:55 +09:00
..
clock.h	ARM: OMAP5: set mmc clock frequency to 192MHz	2018-02-19 16:58:55 +09:00
cpu.h	ti: wdt: omap5: Define WDT_BASE for omap5+ SoC	2017-04-08 21:32:49 -04:00
dra7xx_iodelay.h	ARM: OMAP5/DRA7: Enable iodelay recalibration to be done from uboot	2018-02-19 16:58:55 +09:00
ehci.h	arm: omap5: echi: Add GPL-2.0+ SPDX-License-Identifier	2013-09-20 10:30:54 -04:00
gpio.h	ARM: OMAP5+: GPIO: Add GPIO_TO_PIN() macro	2017-03-20 17:56:21 -04:00
hardware.h	ARM: DRA7x/AM57xx: Get rid of CONFIG_AM57XX	2016-12-03 13:21:11 -05:00
i2c.h	Convert CONFIG_SYS_I2C_BUS_MAX to Kconfig	2017-09-01 20:44:30 -04:00
mem.h	board/ti/dra7xx: add support for parallel NOR	2014-08-25 10:48:12 -04:00
mmc_host_def.h	omap: Update the base address of the MMC controllers	2018-01-18 22:04:21 -05:00
mux_dra7xx.h	board: ti: dra7xx: Select MCAN instead of DCAN on DRA76 EVM	2018-01-19 15:49:23 -05:00
mux_omap5.h	Add GPL-2.0+ SPDX-License-Identifier to source files	2013-07-24 09:44:38 -04:00
omap.h	arm: dra762: Add support for device package identification	2018-01-19 15:49:26 -05:00
sata.h	ARM: O5/dra7xx: Add SATA boot support	2014-02-19 10:47:45 -05:00
spl.h	dra7x: boot: add dfu bootmode support	2016-09-27 23:30:20 +02:00
sys_proto.h	mmc: omap_hsmmc: Add support to get pinctrl values and max frequency for different hw revisions	2018-02-19 16:58:55 +09:00