u-boot/board/toradex/verdin-imx8mm
Philippe Schenker c4b650befc board: verdin-imx8mm: Add KSZ9131 phy skew settings
This patch determines which phy is placed on the board with the PHY ID
then it sets the same settings for KSZ9031 as before but for KSZ9131
it enables both RXC and TXC delay lines in the PHY.
This will compensate the missing delay from the MAC. Other skew
settings are not needed as the traces on board are routed exactly the
same length

Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Tested-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Acked-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-05-01 13:46:22 +02:00
..
imximage.cfg board: toradex: Add Verdin iMX8M Mini support 2020-02-09 14:50:52 +01:00
Kconfig board: toradex: Add Verdin iMX8M Mini support 2020-02-09 14:50:52 +01:00
lpddr4_timing.c board: toradex: Add Verdin iMX8M Mini support 2020-02-09 14:50:52 +01:00
MAINTAINERS toradex: MAINTAINERS: entries for new reST docs 2020-03-05 18:19:40 +08:00
Makefile board: toradex: Add Verdin iMX8M Mini support 2020-02-09 14:50:52 +01:00
spl.c imx: imx8m*: Remove do_reset from board files 2020-05-01 13:46:22 +02:00
verdin-imx8mm.c board: verdin-imx8mm: Add KSZ9131 phy skew settings 2020-05-01 13:46:22 +02:00