mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-30 00:21:06 +00:00
1a4596601f
Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
351 lines
9.3 KiB
C
351 lines
9.3 KiB
C
/*
|
|
* IXP PCI Init
|
|
*
|
|
* (C) Copyright 2011
|
|
* Michael Schwingen, michael@schwingen.org
|
|
* (C) Copyright 2004 eslab.whut.edu.cn
|
|
* Yue Hu(huyue_whut@yahoo.com.cn), Ligong Xue(lgxue@hotmail.com)
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/io.h>
|
|
#include <pci.h>
|
|
#include <asm/arch/ixp425.h>
|
|
#include <asm/arch/ixp425pci.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
static void non_prefetch_read(unsigned int addr, unsigned int cmd,
|
|
unsigned int *data);
|
|
static void non_prefetch_write(unsigned int addr, unsigned int cmd,
|
|
unsigned int data);
|
|
|
|
/*define the sub vendor and subsystem to be used */
|
|
#define IXP425_PCI_SUB_VENDOR_SYSTEM 0x00000000
|
|
|
|
#define PCI_MEMORY_BUS 0x00000000
|
|
#define PCI_MEMORY_PHY 0x00000000
|
|
#define PCI_MEMORY_SIZE 0x04000000
|
|
|
|
#define PCI_MEM_BUS 0x48000000
|
|
#define PCI_MEM_PHY 0x00000000
|
|
#define PCI_MEM_SIZE 0x04000000
|
|
|
|
#define PCI_IO_BUS 0x00000000
|
|
#define PCI_IO_PHY 0x00000000
|
|
#define PCI_IO_SIZE 0x00010000
|
|
|
|
/* build address value for config sycle */
|
|
static unsigned int pci_config_addr(pci_dev_t bdf, unsigned int reg)
|
|
{
|
|
unsigned int bus = PCI_BUS(bdf);
|
|
unsigned int dev = PCI_DEV(bdf);
|
|
unsigned int func = PCI_FUNC(bdf);
|
|
unsigned int addr;
|
|
|
|
if (bus) { /* secondary bus, use type 1 config cycle */
|
|
addr = bdf | (reg & ~3) | 1;
|
|
} else {
|
|
/*
|
|
primary bus, type 0 config cycle. address bits 31:28
|
|
specify the device 10:8 specify the function
|
|
*/
|
|
addr = BIT((31 - dev)) | (func << 8) | (reg & ~3);
|
|
}
|
|
|
|
return addr;
|
|
}
|
|
|
|
static int pci_config_status(void)
|
|
{
|
|
unsigned int regval;
|
|
|
|
regval = readl(PCI_CSR_BASE + PCI_ISR_OFFSET);
|
|
if ((regval & PCI_ISR_PFE) == 0)
|
|
return OK;
|
|
|
|
/* no device present, make sure that the master abort bit is reset */
|
|
writel(PCI_ISR_PFE, PCI_CSR_BASE + PCI_ISR_OFFSET);
|
|
return ERROR;
|
|
}
|
|
|
|
static int pci_ixp_hose_read_config_dword(struct pci_controller *hose,
|
|
pci_dev_t bdf, int where, unsigned int *val)
|
|
{
|
|
unsigned int retval;
|
|
unsigned int addr;
|
|
int stat;
|
|
|
|
debug("pci_ixp_hose_read_config_dword: bdf %x, reg %x", bdf, where);
|
|
/*Set the address to be read */
|
|
addr = pci_config_addr(bdf, where);
|
|
non_prefetch_read(addr, NP_CMD_CONFIGREAD, &retval);
|
|
*val = retval;
|
|
|
|
stat = pci_config_status();
|
|
if (stat < 0)
|
|
*val = -1;
|
|
debug("-> val %x, status %x\n", *val, stat);
|
|
return stat;
|
|
}
|
|
|
|
static int pci_ixp_hose_read_config_word(struct pci_controller *hose,
|
|
pci_dev_t bdf, int where, unsigned short *val)
|
|
{
|
|
unsigned int n;
|
|
unsigned int retval;
|
|
unsigned int addr;
|
|
unsigned int byteEnables;
|
|
int stat;
|
|
|
|
debug("pci_ixp_hose_read_config_word: bdf %x, reg %x", bdf, where);
|
|
n = where % 4;
|
|
/*byte enables are 4 bits active low, the position of each
|
|
bit maps to the byte that it enables */
|
|
byteEnables =
|
|
(~(BIT(n) | BIT((n + 1)))) &
|
|
IXP425_PCI_BOTTOM_NIBBLE_OF_LONG_MASK;
|
|
byteEnables = byteEnables << PCI_NP_CBE_BESL;
|
|
/*Set the address to be read */
|
|
addr = pci_config_addr(bdf, where);
|
|
non_prefetch_read(addr, byteEnables | NP_CMD_CONFIGREAD, &retval);
|
|
|
|
/*Pick out the word we are interested in */
|
|
*val = retval >> (8 * n);
|
|
|
|
stat = pci_config_status();
|
|
if (stat < 0)
|
|
*val = -1;
|
|
debug("-> val %x, status %x\n", *val, stat);
|
|
return stat;
|
|
}
|
|
|
|
static int pci_ixp_hose_read_config_byte(struct pci_controller *hose,
|
|
pci_dev_t bdf, int where, unsigned char *val)
|
|
{
|
|
unsigned int retval;
|
|
unsigned int n;
|
|
unsigned int byteEnables;
|
|
unsigned int addr;
|
|
int stat;
|
|
|
|
debug("pci_ixp_hose_read_config_byte: bdf %x, reg %x", bdf, where);
|
|
n = where % 4;
|
|
/*byte enables are 4 bits, active low, the position of each
|
|
bit maps to the byte that it enables */
|
|
byteEnables = (~BIT(n)) & IXP425_PCI_BOTTOM_NIBBLE_OF_LONG_MASK;
|
|
byteEnables = byteEnables << PCI_NP_CBE_BESL;
|
|
|
|
/*Set the address to be read */
|
|
addr = pci_config_addr(bdf, where);
|
|
non_prefetch_read(addr, byteEnables | NP_CMD_CONFIGREAD, &retval);
|
|
/*Pick out the byte we are interested in */
|
|
*val = retval >> (8 * n);
|
|
|
|
stat = pci_config_status();
|
|
if (stat < 0)
|
|
*val = -1;
|
|
debug("-> val %x, status %x\n", *val, stat);
|
|
return stat;
|
|
}
|
|
|
|
static int pci_ixp_hose_write_config_byte(struct pci_controller *hose,
|
|
pci_dev_t bdf, int where, unsigned char val)
|
|
{
|
|
unsigned int addr;
|
|
unsigned int byteEnables;
|
|
unsigned int n;
|
|
unsigned int ldata;
|
|
int stat;
|
|
|
|
debug("pci_ixp_hose_write_config_byte: bdf %x, reg %x, val %x",
|
|
bdf, where, val);
|
|
n = where % 4;
|
|
/*byte enables are 4 bits active low, the position of each
|
|
bit maps to the byte that it enables */
|
|
byteEnables = (~BIT(n)) & IXP425_PCI_BOTTOM_NIBBLE_OF_LONG_MASK;
|
|
byteEnables = byteEnables << PCI_NP_CBE_BESL;
|
|
ldata = val << (8 * n);
|
|
/*Set the address to be written */
|
|
addr = pci_config_addr(bdf, where);
|
|
non_prefetch_write(addr, byteEnables | NP_CMD_CONFIGWRITE, ldata);
|
|
|
|
stat = pci_config_status();
|
|
debug("-> status %x\n", stat);
|
|
return stat;
|
|
}
|
|
|
|
static int pci_ixp_hose_write_config_word(struct pci_controller *hose,
|
|
pci_dev_t bdf, int where, unsigned short val)
|
|
{
|
|
unsigned int addr;
|
|
unsigned int byteEnables;
|
|
unsigned int n;
|
|
unsigned int ldata;
|
|
int stat;
|
|
|
|
debug("pci_ixp_hose_write_config_word: bdf %x, reg %x, val %x",
|
|
bdf, where, val);
|
|
n = where % 4;
|
|
/*byte enables are 4 bits active low, the position of each
|
|
bit maps to the byte that it enables */
|
|
byteEnables =
|
|
(~(BIT(n) | BIT((n + 1)))) &
|
|
IXP425_PCI_BOTTOM_NIBBLE_OF_LONG_MASK;
|
|
byteEnables = byteEnables << PCI_NP_CBE_BESL;
|
|
ldata = val << (8 * n);
|
|
/*Set the address to be written */
|
|
addr = pci_config_addr(bdf, where);
|
|
non_prefetch_write(addr, byteEnables | NP_CMD_CONFIGWRITE, ldata);
|
|
|
|
stat = pci_config_status();
|
|
debug("-> status %x\n", stat);
|
|
return stat;
|
|
}
|
|
|
|
static int pci_ixp_hose_write_config_dword(struct pci_controller *hose,
|
|
pci_dev_t bdf, int where, unsigned int val)
|
|
{
|
|
unsigned int addr;
|
|
int stat;
|
|
|
|
debug("pci_ixp_hose_write_config_dword: bdf %x, reg %x, val %x",
|
|
bdf, where, val);
|
|
/*Set the address to be written */
|
|
addr = pci_config_addr(bdf, where);
|
|
non_prefetch_write(addr, NP_CMD_CONFIGWRITE, val);
|
|
|
|
stat = pci_config_status();
|
|
debug("-> status %x\n", stat);
|
|
return stat;
|
|
}
|
|
|
|
static void non_prefetch_read(unsigned int addr,
|
|
unsigned int cmd, unsigned int *data)
|
|
{
|
|
writel(addr, PCI_CSR_BASE + PCI_NP_AD_OFFSET);
|
|
|
|
/*set up and execute the read */
|
|
writel(cmd, PCI_CSR_BASE + PCI_NP_CBE_OFFSET);
|
|
|
|
/*The result of the read is now in np_rdata */
|
|
*data = readl(PCI_CSR_BASE + PCI_NP_RDATA_OFFSET);
|
|
|
|
return;
|
|
}
|
|
|
|
static void non_prefetch_write(unsigned int addr,
|
|
unsigned int cmd, unsigned int data)
|
|
{
|
|
|
|
writel(addr, PCI_CSR_BASE + PCI_NP_AD_OFFSET);
|
|
/*set up the write */
|
|
writel(cmd, PCI_CSR_BASE + PCI_NP_CBE_OFFSET);
|
|
/*Execute the write by writing to NP_WDATA */
|
|
writel(data, PCI_CSR_BASE + PCI_NP_WDATA_OFFSET);
|
|
|
|
return;
|
|
}
|
|
|
|
static void crp_write(unsigned int offset, unsigned int data)
|
|
{
|
|
/*
|
|
* The CRP address register bit 16 indicates that we want to do a
|
|
* write
|
|
*/
|
|
writel(PCI_CRP_WRITE | offset, PCI_CSR_BASE + PCI_CRP_AD_CBE_OFFSET);
|
|
writel(data, PCI_CSR_BASE + PCI_CRP_WDATA_OFFSET);
|
|
}
|
|
|
|
void pci_ixp_init(struct pci_controller *hose)
|
|
{
|
|
unsigned int csr;
|
|
|
|
/*
|
|
* Specify that the AHB bus is operating in big endian mode. Set up
|
|
* byte lane swapping between little-endian PCI and the big-endian
|
|
* AHB bus
|
|
*/
|
|
#ifdef __ARMEB__
|
|
csr = PCI_CSR_ABE | PCI_CSR_PDS | PCI_CSR_ADS;
|
|
#else
|
|
csr = PCI_CSR_ABE;
|
|
#endif
|
|
writel(csr, PCI_CSR_BASE + PCI_CSR_OFFSET);
|
|
|
|
writel(0, PCI_CSR_BASE + PCI_INTEN_OFFSET);
|
|
|
|
/*
|
|
* We configure the PCI inbound memory windows to be
|
|
* 1:1 mapped to SDRAM
|
|
*/
|
|
crp_write(PCI_CFG_BASE_ADDRESS_0, 0x00000000);
|
|
crp_write(PCI_CFG_BASE_ADDRESS_1, 0x01000000);
|
|
crp_write(PCI_CFG_BASE_ADDRESS_2, 0x02000000);
|
|
crp_write(PCI_CFG_BASE_ADDRESS_3, 0x03000000);
|
|
|
|
/*
|
|
* Enable CSR window at 64 MiB to allow PCI masters
|
|
* to continue prefetching past 64 MiB boundary.
|
|
*/
|
|
crp_write(PCI_CFG_BASE_ADDRESS_4, 0x04000000);
|
|
/*
|
|
* Enable the IO window to be way up high, at 0xfffffc00
|
|
*/
|
|
crp_write(PCI_CFG_BASE_ADDRESS_5, 0xfffffc01);
|
|
|
|
/*Setup PCI-AHB and AHB-PCI address mappings */
|
|
writel(0x00010203, PCI_CSR_BASE + PCI_AHBMEMBASE_OFFSET);
|
|
|
|
writel(0x00000000, PCI_CSR_BASE + PCI_AHBIOBASE_OFFSET);
|
|
|
|
writel(0x48494a4b, PCI_CSR_BASE + PCI_PCIMEMBASE_OFFSET);
|
|
|
|
crp_write(PCI_CFG_SUB_VENDOR_ID, IXP425_PCI_SUB_VENDOR_SYSTEM);
|
|
|
|
crp_write(PCI_CFG_COMMAND, PCI_CFG_CMD_MAE | PCI_CFG_CMD_BME);
|
|
udelay(1000);
|
|
|
|
/* clear error bits in status register */
|
|
writel(PCI_ISR_PSE | PCI_ISR_PFE | PCI_ISR_PPE | PCI_ISR_AHBE,
|
|
PCI_CSR_BASE + PCI_ISR_OFFSET);
|
|
|
|
/*
|
|
* Set Initialize Complete in PCI Control Register: allow IXP4XX to
|
|
* respond to PCI configuration cycles.
|
|
*/
|
|
csr |= PCI_CSR_IC;
|
|
writel(csr, PCI_CSR_BASE + PCI_CSR_OFFSET);
|
|
|
|
hose->first_busno = 0;
|
|
hose->last_busno = 0;
|
|
|
|
/* System memory space */
|
|
pci_set_region(hose->regions + 0,
|
|
PCI_MEMORY_BUS,
|
|
PCI_MEMORY_PHY, PCI_MEMORY_SIZE, PCI_REGION_SYS_MEMORY);
|
|
|
|
/* PCI memory space */
|
|
pci_set_region(hose->regions + 1,
|
|
PCI_MEM_BUS,
|
|
PCI_MEM_PHY, PCI_MEM_SIZE, PCI_REGION_MEM);
|
|
/* PCI I/O space */
|
|
pci_set_region(hose->regions + 2,
|
|
PCI_IO_BUS, PCI_IO_PHY, PCI_IO_SIZE, PCI_REGION_IO);
|
|
|
|
hose->region_count = 3;
|
|
|
|
pci_set_ops(hose,
|
|
pci_ixp_hose_read_config_byte,
|
|
pci_ixp_hose_read_config_word,
|
|
pci_ixp_hose_read_config_dword,
|
|
pci_ixp_hose_write_config_byte,
|
|
pci_ixp_hose_write_config_word,
|
|
pci_ixp_hose_write_config_dword);
|
|
|
|
pci_register_hose(hose);
|
|
hose->last_busno = pci_hose_scan(hose);
|
|
}
|