mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-14 08:57:58 +00:00
714209832d
Most callers unpack the structure and pass each member. It seems better to pass the whole structure instead, as with the C library. Also add an rtc_ prefix. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Heiko Schocher <hs@denx.de>
233 lines
6.1 KiB
C
233 lines
6.1 KiB
C
/*
|
|
* (C) Copyright 2001, 2002, 2003
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
* Keith Outwater, keith_outwater@mvis.com`
|
|
* Steven Scholz, steven.scholz@imc-berlin.de
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
/*
|
|
* Date & Time support (no alarms) for Dallas Semiconductor (now Maxim)
|
|
* DS1374 Real Time Clock (RTC).
|
|
*
|
|
* based on ds1337.c
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <rtc.h>
|
|
#include <i2c.h>
|
|
|
|
#if defined(CONFIG_CMD_DATE)
|
|
|
|
/*---------------------------------------------------------------------*/
|
|
#undef DEBUG_RTC
|
|
#define DEBUG_RTC
|
|
|
|
#ifdef DEBUG_RTC
|
|
#define DEBUGR(fmt,args...) printf(fmt ,##args)
|
|
#else
|
|
#define DEBUGR(fmt,args...)
|
|
#endif
|
|
/*---------------------------------------------------------------------*/
|
|
|
|
#ifndef CONFIG_SYS_I2C_RTC_ADDR
|
|
# define CONFIG_SYS_I2C_RTC_ADDR 0x68
|
|
#endif
|
|
|
|
#if defined(CONFIG_RTC_DS1374) && (CONFIG_SYS_I2C_SPEED > 400000)
|
|
# error The DS1374 is specified up to 400kHz in fast mode!
|
|
#endif
|
|
|
|
/*
|
|
* RTC register addresses
|
|
*/
|
|
#define RTC_TOD_CNT_BYTE0_ADDR 0x00 /* TimeOfDay */
|
|
#define RTC_TOD_CNT_BYTE1_ADDR 0x01
|
|
#define RTC_TOD_CNT_BYTE2_ADDR 0x02
|
|
#define RTC_TOD_CNT_BYTE3_ADDR 0x03
|
|
|
|
#define RTC_WD_ALM_CNT_BYTE0_ADDR 0x04
|
|
#define RTC_WD_ALM_CNT_BYTE1_ADDR 0x05
|
|
#define RTC_WD_ALM_CNT_BYTE2_ADDR 0x06
|
|
|
|
#define RTC_CTL_ADDR 0x07 /* RTC-CoNTrol-register */
|
|
#define RTC_SR_ADDR 0x08 /* RTC-StatusRegister */
|
|
#define RTC_TCS_DS_ADDR 0x09 /* RTC-TrickleChargeSelect DiodeSelect-register */
|
|
|
|
#define RTC_CTL_BIT_AIE (1<<0) /* Bit 0 - Alarm Interrupt enable */
|
|
#define RTC_CTL_BIT_RS1 (1<<1) /* Bit 1/2 - Rate Select square wave output */
|
|
#define RTC_CTL_BIT_RS2 (1<<2) /* Bit 2/2 - Rate Select square wave output */
|
|
#define RTC_CTL_BIT_WDSTR (1<<3) /* Bit 3 - Watchdog Reset Steering */
|
|
#define RTC_CTL_BIT_BBSQW (1<<4) /* Bit 4 - Battery-Backed Square-Wave */
|
|
#define RTC_CTL_BIT_WD_ALM (1<<5) /* Bit 5 - Watchdoc/Alarm Counter Select */
|
|
#define RTC_CTL_BIT_WACE (1<<6) /* Bit 6 - Watchdog/Alarm Counter Enable WACE*/
|
|
#define RTC_CTL_BIT_EN_OSC (1<<7) /* Bit 7 - Enable Oscilator */
|
|
|
|
#define RTC_SR_BIT_AF 0x01 /* Bit 0 = Alarm Flag */
|
|
#define RTC_SR_BIT_OSF 0x80 /* Bit 7 - Osc Stop Flag */
|
|
|
|
const char RtcTodAddr[] = {
|
|
RTC_TOD_CNT_BYTE0_ADDR,
|
|
RTC_TOD_CNT_BYTE1_ADDR,
|
|
RTC_TOD_CNT_BYTE2_ADDR,
|
|
RTC_TOD_CNT_BYTE3_ADDR
|
|
};
|
|
|
|
static uchar rtc_read (uchar reg);
|
|
static void rtc_write(uchar reg, uchar val, bool set);
|
|
static void rtc_write_raw (uchar reg, uchar val);
|
|
|
|
/*
|
|
* Get the current time from the RTC
|
|
*/
|
|
int rtc_get (struct rtc_time *tm){
|
|
int rel = 0;
|
|
unsigned long time1, time2;
|
|
unsigned int limit;
|
|
unsigned char tmp;
|
|
unsigned int i;
|
|
|
|
/*
|
|
* Since the reads are being performed one byte at a time,
|
|
* there is a chance that a carry will occur during the read.
|
|
* To detect this, 2 reads are performed and compared.
|
|
*/
|
|
limit = 10;
|
|
do {
|
|
i = 4;
|
|
time1 = 0;
|
|
while (i--) {
|
|
tmp = rtc_read(RtcTodAddr[i]);
|
|
time1 = (time1 << 8) | (tmp & 0xff);
|
|
}
|
|
|
|
i = 4;
|
|
time2 = 0;
|
|
while (i--) {
|
|
tmp = rtc_read(RtcTodAddr[i]);
|
|
time2 = (time2 << 8) | (tmp & 0xff);
|
|
}
|
|
} while ((time1 != time2) && limit--);
|
|
|
|
if (time1 != time2) {
|
|
printf("can't get consistent time from rtc chip\n");
|
|
rel = -1;
|
|
}
|
|
|
|
DEBUGR ("Get RTC s since 1.1.1970: %ld\n", time1);
|
|
|
|
rtc_to_tm(time1, tm); /* To Gregorian Date */
|
|
|
|
if (rtc_read(RTC_SR_ADDR) & RTC_SR_BIT_OSF) {
|
|
printf ("### Warning: RTC oscillator has stopped\n");
|
|
rel = -1;
|
|
}
|
|
|
|
DEBUGR ("Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
|
|
tm->tm_year, tm->tm_mon, tm->tm_mday, tm->tm_wday,
|
|
tm->tm_hour, tm->tm_min, tm->tm_sec);
|
|
|
|
return rel;
|
|
}
|
|
|
|
/*
|
|
* Set the RTC
|
|
*/
|
|
int rtc_set (struct rtc_time *tmp){
|
|
|
|
unsigned long time;
|
|
unsigned i;
|
|
|
|
DEBUGR ("Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
|
|
tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
|
|
tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
|
|
|
|
if (tmp->tm_year < 1970 || tmp->tm_year > 2069)
|
|
printf("WARNING: year should be between 1970 and 2069!\n");
|
|
|
|
time = rtc_mktime(tmp);
|
|
|
|
DEBUGR ("Set RTC s since 1.1.1970: %ld (0x%02lx)\n", time, time);
|
|
|
|
/* write to RTC_TOD_CNT_BYTEn_ADDR */
|
|
for (i = 0; i <= 3; i++) {
|
|
rtc_write_raw(RtcTodAddr[i], (unsigned char)(time & 0xff));
|
|
time = time >> 8;
|
|
}
|
|
|
|
/* Start clock */
|
|
rtc_write(RTC_CTL_ADDR, RTC_CTL_BIT_EN_OSC, false);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Reset the RTC. We setting the date back to 1970-01-01.
|
|
* We also enable the oscillator output on the SQW/OUT pin and program
|
|
* it for 32,768 Hz output. Note that according to the datasheet, turning
|
|
* on the square wave output increases the current drain on the backup
|
|
* battery to something between 480nA and 800nA.
|
|
*/
|
|
void rtc_reset (void){
|
|
|
|
struct rtc_time tmp;
|
|
|
|
/* clear status flags */
|
|
rtc_write(RTC_SR_ADDR, (RTC_SR_BIT_AF|RTC_SR_BIT_OSF), false); /* clearing OSF and AF */
|
|
|
|
/* Initialise DS1374 oriented to MPC8349E-ADS */
|
|
rtc_write (RTC_CTL_ADDR, (RTC_CTL_BIT_EN_OSC
|
|
|RTC_CTL_BIT_WACE
|
|
|RTC_CTL_BIT_AIE), false);/* start osc, disable WACE, clear AIE
|
|
- set to 0 */
|
|
rtc_write (RTC_CTL_ADDR, (RTC_CTL_BIT_WD_ALM
|
|
|RTC_CTL_BIT_WDSTR
|
|
|RTC_CTL_BIT_RS1
|
|
|RTC_CTL_BIT_RS2
|
|
|RTC_CTL_BIT_BBSQW), true);/* disable WD/ALM, WDSTR set to INT-pin,
|
|
set BBSQW and SQW to 32k
|
|
- set to 1 */
|
|
tmp.tm_year = 1970;
|
|
tmp.tm_mon = 1;
|
|
tmp.tm_mday= 1;
|
|
tmp.tm_hour = 0;
|
|
tmp.tm_min = 0;
|
|
tmp.tm_sec = 0;
|
|
|
|
rtc_set(&tmp);
|
|
|
|
printf("RTC: %4d-%02d-%02d %2d:%02d:%02d UTC\n",
|
|
tmp.tm_year, tmp.tm_mon, tmp.tm_mday,
|
|
tmp.tm_hour, tmp.tm_min, tmp.tm_sec);
|
|
|
|
rtc_write(RTC_WD_ALM_CNT_BYTE2_ADDR, 0xAC, true);
|
|
rtc_write(RTC_WD_ALM_CNT_BYTE1_ADDR, 0xDE, true);
|
|
rtc_write(RTC_WD_ALM_CNT_BYTE2_ADDR, 0xAD, true);
|
|
}
|
|
|
|
/*
|
|
* Helper functions
|
|
*/
|
|
static uchar rtc_read (uchar reg)
|
|
{
|
|
return (i2c_reg_read (CONFIG_SYS_I2C_RTC_ADDR, reg));
|
|
}
|
|
|
|
static void rtc_write(uchar reg, uchar val, bool set)
|
|
{
|
|
if (set == true) {
|
|
val |= i2c_reg_read (CONFIG_SYS_I2C_RTC_ADDR, reg);
|
|
i2c_reg_write (CONFIG_SYS_I2C_RTC_ADDR, reg, val);
|
|
} else {
|
|
val = i2c_reg_read (CONFIG_SYS_I2C_RTC_ADDR, reg) & ~val;
|
|
i2c_reg_write (CONFIG_SYS_I2C_RTC_ADDR, reg, val);
|
|
}
|
|
}
|
|
|
|
static void rtc_write_raw (uchar reg, uchar val)
|
|
{
|
|
i2c_reg_write (CONFIG_SYS_I2C_RTC_ADDR, reg, val);
|
|
}
|
|
#endif
|