mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-14 17:07:38 +00:00
6e7df1d151
At this point, the remaining places where we have a symbol that is defined as CONFIG_... are in fairly odd locations. While as much dead code has been removed as possible, some of these locations are simply less obvious at first. In other cases, this code is used, but was defined in such a way as to have been missed by earlier checks. Perform a rename of all such remaining symbols to be CFG_... rather than CONFIG_... Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
1060 lines
29 KiB
C
1060 lines
29 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (C) 2018-2022 Marvell International Ltd.
|
|
*/
|
|
|
|
#include <dm.h>
|
|
#include <dm/device_compat.h>
|
|
#include <env.h>
|
|
#include <net.h>
|
|
#include <netdev.h>
|
|
#include <malloc.h>
|
|
#include <miiphy.h>
|
|
#include <misc.h>
|
|
#include <asm/io.h>
|
|
#include <linux/delay.h>
|
|
|
|
#include <mach/cvmx-regs.h>
|
|
#include <mach/cvmx-csr.h>
|
|
#include <mach/cvmx-bootmem.h>
|
|
#include <mach/octeon-model.h>
|
|
#include <mach/cvmx-fuse.h>
|
|
#include <mach/octeon-feature.h>
|
|
#include <mach/octeon_fdt.h>
|
|
#include <mach/cvmx-qlm.h>
|
|
#include <mach/octeon_eth.h>
|
|
#include <mach/octeon_qlm.h>
|
|
#include <mach/cvmx-pcie.h>
|
|
#include <mach/cvmx-coremask.h>
|
|
|
|
#include <mach/cvmx-agl-defs.h>
|
|
#include <mach/cvmx-asxx-defs.h>
|
|
#include <mach/cvmx-bgxx-defs.h>
|
|
#include <mach/cvmx-dbg-defs.h>
|
|
#include <mach/cvmx-gmxx-defs.h>
|
|
#include <mach/cvmx-gserx-defs.h>
|
|
#include <mach/cvmx-ipd-defs.h>
|
|
#include <mach/cvmx-l2c-defs.h>
|
|
#include <mach/cvmx-npi-defs.h>
|
|
#include <mach/cvmx-pcsx-defs.h>
|
|
#include <mach/cvmx-pexp-defs.h>
|
|
#include <mach/cvmx-pki-defs.h>
|
|
#include <mach/cvmx-pko-defs.h>
|
|
#include <mach/cvmx-smix-defs.h>
|
|
#include <mach/cvmx-sriox-defs.h>
|
|
#include <mach/cvmx-xcv-defs.h>
|
|
#include <mach/cvmx-pcsxx-defs.h>
|
|
|
|
#include <mach/cvmx-helper.h>
|
|
#include <mach/cvmx-helper-board.h>
|
|
#include <mach/cvmx-helper-fdt.h>
|
|
#include <mach/cvmx-helper-bgx.h>
|
|
#include <mach/cvmx-helper-cfg.h>
|
|
|
|
#include <mach/cvmx-hwpko.h>
|
|
#include <mach/cvmx-pko.h>
|
|
#include <mach/cvmx-pki.h>
|
|
#include <mach/cvmx-config.h>
|
|
#include <mach/cvmx-mdio.h>
|
|
|
|
/** Maximum receive packet size (hardware default is 1536) */
|
|
#define CFG_OCTEON_NETWORK_MRU 1536
|
|
|
|
#define OCTEON_BOOTLOADER_NAMED_BLOCK_TMP_PREFIX "__tmp"
|
|
|
|
/**
|
|
* Enables RX packet debugging if octeon_debug_rx_packets is set in the
|
|
* environment.
|
|
*/
|
|
#define DEBUG_RX_PACKET
|
|
|
|
/**
|
|
* Enables TX packet debugging if octeon_debug_tx_packets is set in the
|
|
* environment.
|
|
*/
|
|
#define DEBUG_TX_PACKET
|
|
|
|
/* Global flag indicating common hw has been set up */
|
|
static int octeon_global_hw_inited;
|
|
|
|
#if defined(DEBUG_RX_PACKET) || defined(DEBUG_TX_PACKET)
|
|
static int packet_rx_debug;
|
|
static int packet_tx_debug;
|
|
#endif
|
|
|
|
/* Make sure that we have enough buffers to keep prefetching blocks happy.
|
|
* Absolute minimum is probably about 200.
|
|
*/
|
|
#define NUM_PACKET_BUFFERS 1000
|
|
|
|
#define PKO_SHUTDOWN_TIMEOUT_VAL 100
|
|
|
|
/* Define the offsets from the base CSR */
|
|
#define GMX_PRT_CFG 0x10
|
|
|
|
#define GMX_RX_FRM_MAX 0x30
|
|
#define GMX_RX_JABBER 0x38
|
|
|
|
#define GMX_RX_ADR_CTL 0x100
|
|
#define GMX_RX_ADR_CAM_EN 0x108
|
|
#define GMX_RX_ADR_CAM0 0x180
|
|
#define GMX_RX_ADR_CAM1 0x188
|
|
#define GMX_RX_ADR_CAM2 0x190
|
|
#define GMX_RX_ADR_CAM3 0x198
|
|
#define GMX_RX_ADR_CAM4 0x1a0
|
|
#define GMX_RX_ADR_CAM5 0x1a8
|
|
#define GMX_TX_OVR_BP 0x4c8
|
|
|
|
/**
|
|
* Set the hardware MAC address for a device
|
|
*
|
|
* @param interface interface of port to set
|
|
* @param index index of port to set MAC address for
|
|
* @param addr Address structure to change it too.
|
|
* @return Zero on success
|
|
*/
|
|
static int cvm_oct_set_mac_address(struct udevice *dev)
|
|
{
|
|
struct octeon_eth_info *priv = dev_get_priv(dev);
|
|
struct eth_pdata *pdata = dev_get_plat(dev);
|
|
cvmx_gmxx_prtx_cfg_t gmx_cfg;
|
|
cvmx_helper_interface_mode_t mode;
|
|
cvmx_gmxx_rxx_adr_ctl_t control;
|
|
u8 *ptr = (uint8_t *)pdata->enetaddr;
|
|
int interface = priv->interface;
|
|
int index = priv->index;
|
|
u64 mac = 0;
|
|
u64 gmx_reg;
|
|
int xipd_port;
|
|
int i;
|
|
|
|
for (i = 0; i < 6; i++)
|
|
mac = (mac << 8) | (u64)(ptr[i]);
|
|
|
|
debug("%s(%s (%pM))\n", __func__, dev->name, ptr);
|
|
mode = cvmx_helper_interface_get_mode(interface);
|
|
|
|
/* It's rather expensive to change the MAC address for BGX so we only
|
|
* do this if it has changed or not been set previously.
|
|
*/
|
|
if (octeon_has_feature(OCTEON_FEATURE_BGX)) {
|
|
xipd_port = cvmx_helper_get_ipd_port(interface, index);
|
|
if (priv->last_bgx_mac != mac || !priv->bgx_mac_set) {
|
|
cvmx_helper_bgx_set_mac(xipd_port, 1, 2, mac);
|
|
priv->last_bgx_mac = mac;
|
|
priv->bgx_mac_set = 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
if (mode == CVMX_HELPER_INTERFACE_MODE_AGL) {
|
|
gmx_reg = CVMX_AGL_GMX_RXX_INT_REG(0);
|
|
} else {
|
|
gmx_reg = CVMX_GMXX_RXX_INT_REG(index, interface);
|
|
csr_wr(CVMX_GMXX_SMACX(index, interface), mac);
|
|
}
|
|
|
|
/* Disable interface */
|
|
gmx_cfg.u64 = csr_rd(gmx_reg + GMX_PRT_CFG);
|
|
csr_wr(gmx_reg + GMX_PRT_CFG, gmx_cfg.u64 & ~1ull);
|
|
debug("%s: gmx reg: 0x%llx\n", __func__, gmx_reg);
|
|
|
|
csr_wr(gmx_reg + GMX_RX_ADR_CAM0, ptr[0]);
|
|
csr_wr(gmx_reg + GMX_RX_ADR_CAM1, ptr[1]);
|
|
csr_wr(gmx_reg + GMX_RX_ADR_CAM2, ptr[2]);
|
|
csr_wr(gmx_reg + GMX_RX_ADR_CAM3, ptr[3]);
|
|
csr_wr(gmx_reg + GMX_RX_ADR_CAM4, ptr[4]);
|
|
csr_wr(gmx_reg + GMX_RX_ADR_CAM5, ptr[5]);
|
|
|
|
control.u64 = 0;
|
|
control.s.bcst = 1; /* Allow broadcast MAC addresses */
|
|
control.s.mcst = 1; /* Force reject multicast packets */
|
|
control.s.cam_mode = 1; /* Filter packets based on the CAM */
|
|
|
|
csr_wr(gmx_reg + GMX_RX_ADR_CTL, control.u64);
|
|
|
|
csr_wr(gmx_reg + GMX_RX_ADR_CAM_EN, 1);
|
|
|
|
/* Return interface to previous enable state */
|
|
csr_wr(gmx_reg + GMX_PRT_CFG, gmx_cfg.u64);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void cvm_oct_fill_hw_memory(u64 pool, u64 size, u64 elements)
|
|
{
|
|
static int alloc_count;
|
|
char tmp_name[64];
|
|
int ret;
|
|
|
|
debug("%s: pool: 0x%llx, size: 0xx%llx, count: 0x%llx\n",
|
|
__func__, pool, size, elements);
|
|
sprintf(tmp_name, "%s_fpa_alloc_%d",
|
|
OCTEON_BOOTLOADER_NAMED_BLOCK_TMP_PREFIX, alloc_count++);
|
|
ret = cvmx_fpa_setup_pool(pool, tmp_name, NULL, size, elements);
|
|
}
|
|
|
|
/**
|
|
* Configure common hardware for all interfaces
|
|
*/
|
|
static void cvm_oct_configure_common_hw(void)
|
|
{
|
|
int mru = env_get_ulong("octeon_mru", 0, CFG_OCTEON_NETWORK_MRU);
|
|
int packet_pool_size = CVMX_FPA_PACKET_POOL_SIZE;
|
|
|
|
if (mru > packet_pool_size)
|
|
packet_pool_size = (mru + CVMX_CACHE_LINE_SIZE - 1) &
|
|
~(CVMX_CACHE_LINE_SIZE - 1);
|
|
|
|
/* Setup the FPA */
|
|
cvmx_fpa_enable();
|
|
|
|
cvm_oct_fill_hw_memory(CVMX_FPA_WQE_POOL, CVMX_FPA_WQE_POOL_SIZE,
|
|
NUM_PACKET_BUFFERS);
|
|
#if CVMX_FPA_OUTPUT_BUFFER_POOL != CVMX_FPA_PACKET_POOL
|
|
if (!octeon_has_feature(OCTEON_FEATURE_CN78XX_WQE)) {
|
|
cvm_oct_fill_hw_memory(CVMX_FPA_OUTPUT_BUFFER_POOL,
|
|
CVMX_FPA_OUTPUT_BUFFER_POOL_SIZE, 128);
|
|
}
|
|
#endif
|
|
cvm_oct_fill_hw_memory(CVMX_FPA_PACKET_POOL, packet_pool_size,
|
|
NUM_PACKET_BUFFERS);
|
|
|
|
cvmx_helper_initialize_packet_io_global();
|
|
cvmx_helper_initialize_packet_io_local();
|
|
|
|
/* The MRU defaults to 1536 bytes by the hardware. Setting
|
|
* CFG_OCTEON_NETWORK_MRU allows this to be overridden.
|
|
*/
|
|
if (octeon_has_feature(OCTEON_FEATURE_PKI)) {
|
|
struct cvmx_pki_global_config gbl_cfg;
|
|
int i;
|
|
|
|
cvmx_pki_read_global_config(0, &gbl_cfg);
|
|
for (i = 0; i < CVMX_PKI_NUM_FRAME_CHECK; i++)
|
|
gbl_cfg.frm_len[i].maxlen = mru;
|
|
cvmx_pki_write_global_config(0, &gbl_cfg);
|
|
}
|
|
|
|
/* Set POW get work timeout to maximum value */
|
|
if (octeon_has_feature(OCTEON_FEATURE_CN68XX_WQE) ||
|
|
octeon_has_feature(OCTEON_FEATURE_CN78XX_WQE))
|
|
csr_wr(CVMX_SSO_NW_TIM, 0x3ff);
|
|
else
|
|
csr_wr(CVMX_POW_NW_TIM, 0x3ff);
|
|
}
|
|
|
|
/**
|
|
* Enables Ethernet devices to allow packets to be transmitted and received.
|
|
* For example, this is activated when the DHCP command is issued.
|
|
*
|
|
* @param dev Ethernet device to initialize
|
|
* @param bis board data structure, not used.
|
|
*
|
|
* @return 1 for success
|
|
*/
|
|
int octeon_eth_init(struct udevice *dev)
|
|
{
|
|
struct octeon_eth_info *priv = dev_get_priv(dev);
|
|
|
|
debug("%s(), dev_ptr: %p, dev: %s, port: %d\n", __func__, dev,
|
|
dev->name, priv->port);
|
|
|
|
if (priv->initted_flag) {
|
|
debug("%s already initialized\n", dev->name);
|
|
return 1;
|
|
}
|
|
|
|
if (!octeon_global_hw_inited) {
|
|
debug("Initializing common hardware\n");
|
|
cvm_oct_configure_common_hw();
|
|
}
|
|
|
|
/* Ignore backpressure on RGMII ports */
|
|
if (!octeon_has_feature(OCTEON_FEATURE_BGX))
|
|
csr_wr(priv->gmx_base + GMX_TX_OVR_BP, 0xf << 8 | 0xf);
|
|
|
|
debug("%s: Setting MAC address\n", __func__);
|
|
cvm_oct_set_mac_address(dev);
|
|
|
|
if (!octeon_global_hw_inited) {
|
|
debug("Enabling packet input\n");
|
|
cvmx_helper_ipd_and_packet_input_enable();
|
|
octeon_global_hw_inited = 1;
|
|
|
|
/* Connect, configure and start the PHY, if the device is
|
|
* connected to one. If not, then it's most likely an SPF
|
|
* enabled port, which does not have such PHY setup here.
|
|
*/
|
|
if (priv->mdio_dev) {
|
|
priv->phy_dev = dm_eth_phy_connect(dev);
|
|
phy_config(priv->phy_dev);
|
|
phy_startup(priv->phy_dev);
|
|
}
|
|
}
|
|
priv->enabled = 0;
|
|
priv->initted_flag = 1;
|
|
|
|
debug("%s exiting successfully\n", __func__);
|
|
return 1;
|
|
}
|
|
|
|
/**
|
|
* Initializes the specified interface and port
|
|
*
|
|
* @param interface interface to initialize
|
|
* @param index port index on interface
|
|
* @param port ipd port number
|
|
* @param if_mode interface mode
|
|
*
|
|
* @return 0 for success, -1 if out of memory, 1 if port is invalid
|
|
*/
|
|
static int octeon_eth_initialize(struct udevice *dev, int interface,
|
|
int index, int port,
|
|
cvmx_helper_interface_mode_t if_mode)
|
|
{
|
|
struct octeon_eth_info *oct_eth_info = dev_get_priv(dev);
|
|
int eth;
|
|
|
|
eth = cvmx_helper_get_port_fdt_node_offset(interface, index);
|
|
if (eth <= 0) {
|
|
debug("ERROR: No fdt node for interface %d, index %d\n",
|
|
interface, index);
|
|
return 1;
|
|
}
|
|
|
|
oct_eth_info->is_c45 = (if_mode == CVMX_HELPER_INTERFACE_MODE_XAUI) ||
|
|
(if_mode == CVMX_HELPER_INTERFACE_MODE_RXAUI) ||
|
|
(if_mode == CVMX_HELPER_INTERFACE_MODE_XFI) ||
|
|
(if_mode == CVMX_HELPER_INTERFACE_MODE_XLAUI) ||
|
|
(if_mode == CVMX_HELPER_INTERFACE_MODE_10G_KR) ||
|
|
(if_mode == CVMX_HELPER_INTERFACE_MODE_10G_KR);
|
|
oct_eth_info->port = port;
|
|
oct_eth_info->index = index;
|
|
oct_eth_info->interface = interface;
|
|
oct_eth_info->initted_flag = 0;
|
|
/* This is guaranteed to force the link state to be printed out */
|
|
oct_eth_info->link_state = 0xffffffffffffffffULL;
|
|
debug("Setting up port: %d, int: %d, index: %d, device: octeth%d\n",
|
|
oct_eth_info->port, oct_eth_info->interface, oct_eth_info->index,
|
|
dev_seq(dev));
|
|
if (if_mode == CVMX_HELPER_INTERFACE_MODE_AGL) {
|
|
oct_eth_info->gmx_base = CVMX_AGL_GMX_RXX_INT_REG(0);
|
|
} else {
|
|
if (!octeon_has_feature(OCTEON_FEATURE_BGX))
|
|
oct_eth_info->gmx_base =
|
|
CVMX_GMXX_RXX_INT_REG(index, interface);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* @INTERNAL
|
|
* Converts a BGX address to the node, interface and port number
|
|
*
|
|
* @param bgx_addr Address of CSR register
|
|
*
|
|
* @return node, interface and port number, will be -1 for invalid address.
|
|
*/
|
|
static struct cvmx_xiface __cvmx_bgx_reg_addr_to_xiface(u64 bgx_addr)
|
|
{
|
|
struct cvmx_xiface xi = { -1, -1 };
|
|
|
|
xi.node = cvmx_csr_addr_to_node(bgx_addr);
|
|
bgx_addr = cvmx_csr_addr_strip_node(bgx_addr);
|
|
if ((bgx_addr & 0xFFFFFFFFF0000000) != 0x00011800E0000000) {
|
|
debug("%s: Invalid BGX address 0x%llx\n", __func__,
|
|
(unsigned long long)bgx_addr);
|
|
xi.node = -1;
|
|
return xi;
|
|
}
|
|
xi.interface = (bgx_addr >> 24) & 0x0F;
|
|
|
|
return xi;
|
|
}
|
|
|
|
static int octeon_nic_probe(struct udevice *dev)
|
|
{
|
|
struct octeon_eth_info *info = dev_get_priv(dev);
|
|
struct ofnode_phandle_args phandle;
|
|
struct cvmx_xiface xi;
|
|
ofnode node, mdio_node;
|
|
int ipd_port;
|
|
int intf;
|
|
int ret;
|
|
|
|
/* The empty stub is to keep cvmx_user_app_init() happy. */
|
|
cvmx_npi_max_pknds = 1;
|
|
__cvmx_helper_init_port_valid();
|
|
|
|
xi = __cvmx_bgx_reg_addr_to_xiface(dev_read_addr(dev));
|
|
intf = xi.interface;
|
|
debug("%s: Found BGX node %d, interface %d\n", __func__, xi.node, intf);
|
|
|
|
ipd_port = cvmx_helper_get_ipd_port(intf, xi.node);
|
|
ret = octeon_eth_initialize(dev, intf, xi.node, ipd_port,
|
|
cvmx_helper_interface_get_mode(intf));
|
|
|
|
/* Move to subnode, as this includes the "phy-handle" */
|
|
node = dev_read_first_subnode(dev);
|
|
|
|
/* Check if an SPF module is conneted, then no MDIO is probed */
|
|
ret = ofnode_parse_phandle_with_args(node, "sfp-slot", NULL, 0, 0,
|
|
&phandle);
|
|
if (!ret) {
|
|
dev_dbg(dev, "sfp-slot found, not probing for MDIO\n");
|
|
return 0;
|
|
}
|
|
|
|
/* Continue with MDIO probing */
|
|
ret = ofnode_parse_phandle_with_args(node, "phy-handle", NULL, 0, 0,
|
|
&phandle);
|
|
if (ret) {
|
|
dev_err(dev, "phy-handle not found in subnode\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* Get MDIO node */
|
|
mdio_node = ofnode_get_parent(phandle.node);
|
|
ret = uclass_get_device_by_ofnode(UCLASS_MDIO, mdio_node,
|
|
&info->mdio_dev);
|
|
if (ret) {
|
|
dev_err(dev, "mdio_dev not found\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* Sets the hardware MAC address of the Ethernet device
|
|
*
|
|
* @param dev - Ethernet device
|
|
*
|
|
* @return 0 for success
|
|
*/
|
|
int octeon_eth_write_hwaddr(struct udevice *dev)
|
|
{
|
|
struct octeon_eth_info *oct_eth_info = dev_get_priv(dev);
|
|
struct eth_pdata *pdata = dev_get_plat(dev);
|
|
|
|
/* Skip if the interface isn't yet enabled */
|
|
if (!oct_eth_info->enabled) {
|
|
debug("%s: Interface not enabled, not setting MAC address\n",
|
|
__func__);
|
|
return 0;
|
|
}
|
|
debug("%s: Setting %s address to %02x:%02x:%02x:%02x:%02x:%02x\n",
|
|
__func__, dev->name, pdata->enetaddr[0], pdata->enetaddr[1],
|
|
pdata->enetaddr[2], pdata->enetaddr[3], pdata->enetaddr[4],
|
|
pdata->enetaddr[5]);
|
|
return cvm_oct_set_mac_address(dev);
|
|
}
|
|
|
|
/**
|
|
* Enables and disables the XCV RGMII interface
|
|
*
|
|
* @param interface Interface number
|
|
* @param index Port index (should be 0 for RGMII)
|
|
* @param enable True to enable it, false to disable it
|
|
*/
|
|
static void octeon_bgx_xcv_rgmii_enable(int interface, int index, bool enable)
|
|
{
|
|
union cvmx_xcv_reset xcv_reset;
|
|
|
|
debug("%s(%d, %d, %sable)\n", __func__, interface, index,
|
|
enable ? "en" : "dis");
|
|
xcv_reset.u64 = csr_rd(CVMX_XCV_RESET);
|
|
xcv_reset.s.rx_pkt_rst_n = enable ? 1 : 0;
|
|
csr_wr(CVMX_XCV_RESET, xcv_reset.u64);
|
|
}
|
|
|
|
/**
|
|
* Enables a SGMII interface
|
|
*
|
|
* @param dev - Ethernet device to initialize
|
|
*/
|
|
void octeon_eth_sgmii_enable(struct udevice *dev)
|
|
{
|
|
struct octeon_eth_info *oct_eth_info;
|
|
cvmx_gmxx_prtx_cfg_t gmx_cfg;
|
|
int index, interface;
|
|
cvmx_helper_interface_mode_t if_mode;
|
|
|
|
oct_eth_info = dev_get_priv(dev);
|
|
interface = oct_eth_info->interface;
|
|
index = oct_eth_info->index;
|
|
|
|
debug("%s(%s) (%d.%d)\n", __func__, dev->name, interface, index);
|
|
if (octeon_has_feature(OCTEON_FEATURE_BGX)) {
|
|
cvmx_bgxx_cmrx_config_t cmr_config;
|
|
|
|
cmr_config.u64 =
|
|
csr_rd(CVMX_BGXX_CMRX_CONFIG(index, interface));
|
|
cmr_config.s.enable = 1;
|
|
cmr_config.s.data_pkt_tx_en = 1;
|
|
cmr_config.s.data_pkt_rx_en = 1;
|
|
csr_wr(CVMX_BGXX_CMRX_CONFIG(index, interface), cmr_config.u64);
|
|
mdelay(100);
|
|
if (cvmx_helper_bgx_is_rgmii(interface, index))
|
|
octeon_bgx_xcv_rgmii_enable(interface, index, true);
|
|
} else {
|
|
if_mode = cvmx_helper_interface_get_mode(interface);
|
|
/* Normal operating mode. */
|
|
|
|
if (if_mode == CVMX_HELPER_INTERFACE_MODE_SGMII ||
|
|
if_mode == CVMX_HELPER_INTERFACE_MODE_QSGMII) {
|
|
cvmx_pcsx_miscx_ctl_reg_t pcsx_miscx_ctl_reg;
|
|
|
|
debug(" if mode: (Q)SGMII\n");
|
|
pcsx_miscx_ctl_reg.u64 = csr_rd(CVMX_PCSX_MISCX_CTL_REG(index, interface));
|
|
pcsx_miscx_ctl_reg.s.gmxeno = 0;
|
|
csr_wr(CVMX_PCSX_MISCX_CTL_REG(index, interface),
|
|
pcsx_miscx_ctl_reg.u64);
|
|
} else if (if_mode != CVMX_HELPER_INTERFACE_MODE_AGL) {
|
|
cvmx_pcsxx_misc_ctl_reg_t pcsxx_misc_ctl_reg;
|
|
|
|
debug(" if mode: AGM\n");
|
|
pcsxx_misc_ctl_reg.u64 =
|
|
csr_rd(CVMX_PCSXX_MISC_CTL_REG(interface));
|
|
pcsxx_misc_ctl_reg.s.gmxeno = 0;
|
|
csr_wr(CVMX_PCSXX_MISC_CTL_REG(interface),
|
|
pcsxx_misc_ctl_reg.u64);
|
|
}
|
|
|
|
gmx_cfg.u64 = csr_rd(oct_eth_info->gmx_base + GMX_PRT_CFG);
|
|
gmx_cfg.s.en = 1;
|
|
csr_wr(oct_eth_info->gmx_base + GMX_PRT_CFG, gmx_cfg.u64);
|
|
gmx_cfg.u64 = csr_rd(oct_eth_info->gmx_base + GMX_PRT_CFG);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* Enables an Ethernet interface
|
|
*
|
|
* @param dev - Ethernet device to enable
|
|
*/
|
|
void octeon_eth_enable(struct udevice *dev)
|
|
{
|
|
struct octeon_eth_info *oct_eth_info;
|
|
u64 tmp;
|
|
int interface;
|
|
cvmx_helper_interface_mode_t if_mode;
|
|
|
|
oct_eth_info = dev_get_priv(dev);
|
|
interface = oct_eth_info->interface;
|
|
if_mode = cvmx_helper_interface_get_mode(interface);
|
|
|
|
switch (if_mode) {
|
|
case CVMX_HELPER_INTERFACE_MODE_RGMII:
|
|
case CVMX_HELPER_INTERFACE_MODE_GMII:
|
|
debug(" rgmii/gmii mode\n");
|
|
tmp = csr_rd(CVMX_ASXX_RX_PRT_EN(interface));
|
|
tmp |= (1ull << (oct_eth_info->port & 0x3));
|
|
csr_wr(CVMX_ASXX_RX_PRT_EN(interface), tmp);
|
|
tmp = csr_rd(CVMX_ASXX_TX_PRT_EN(interface));
|
|
tmp |= (1ull << (oct_eth_info->port & 0x3));
|
|
csr_wr(CVMX_ASXX_TX_PRT_EN(interface), tmp);
|
|
octeon_eth_write_hwaddr(dev);
|
|
break;
|
|
|
|
case CVMX_HELPER_INTERFACE_MODE_SGMII:
|
|
case CVMX_HELPER_INTERFACE_MODE_XAUI:
|
|
case CVMX_HELPER_INTERFACE_MODE_RXAUI:
|
|
case CVMX_HELPER_INTERFACE_MODE_XLAUI:
|
|
case CVMX_HELPER_INTERFACE_MODE_XFI:
|
|
case CVMX_HELPER_INTERFACE_MODE_10G_KR:
|
|
case CVMX_HELPER_INTERFACE_MODE_40G_KR4:
|
|
case CVMX_HELPER_INTERFACE_MODE_MIXED:
|
|
case CVMX_HELPER_INTERFACE_MODE_AGL:
|
|
debug(" SGMII/XAUI/etc.\n");
|
|
octeon_eth_sgmii_enable(dev);
|
|
octeon_eth_write_hwaddr(dev);
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
void octeon_phy_port_check(struct udevice *dev)
|
|
{
|
|
struct octeon_eth_info *oct_eth_info = dev_get_priv(dev);
|
|
struct phy_device *phydev = oct_eth_info->phydev;
|
|
|
|
if (oct_eth_info->phy_port_check)
|
|
oct_eth_info->phy_port_check(phydev);
|
|
}
|
|
|
|
/**
|
|
* Configure the RGMII port for the negotiated speed
|
|
*
|
|
* @param dev Linux device for the RGMII port
|
|
*/
|
|
static void cvm_oct_configure_rgmii_speed(struct udevice *dev)
|
|
{
|
|
struct octeon_eth_info *priv = dev_get_priv(dev);
|
|
int port = priv->port;
|
|
cvmx_helper_link_info_t link_state = cvmx_helper_link_get(port);
|
|
|
|
/* If the port is down some PHYs we need to check modules, etc. */
|
|
if (!link_state.s.link_up)
|
|
octeon_phy_port_check(dev);
|
|
|
|
if (link_state.u64 != priv->link_state) {
|
|
cvmx_helper_interface_mode_t mode;
|
|
|
|
octeon_phy_port_check(dev);
|
|
|
|
debug("%s(%s): Link state changed\n", __func__, dev->name);
|
|
printf("%s: ", dev->name);
|
|
if (!link_state.s.link_up) {
|
|
puts("Down ");
|
|
} else {
|
|
printf("Up %d Mbps ", link_state.s.speed);
|
|
if (link_state.s.full_duplex)
|
|
puts("Full duplex ");
|
|
else
|
|
puts("Half duplex ");
|
|
}
|
|
mode = cvmx_helper_interface_get_mode(priv->interface);
|
|
printf("(port %2d) (%s)\n", port,
|
|
cvmx_helper_interface_mode_to_string(mode));
|
|
debug("%s: Setting link state\n", __func__);
|
|
cvmx_helper_link_set(priv->port, link_state);
|
|
priv->link_state = link_state.u64;
|
|
}
|
|
}
|
|
|
|
#if defined(DEBUG_TX_PACKET) || defined(DEBUG_RX_PACKET)
|
|
static void print_mac(const char *label, const uint8_t *mac_addr)
|
|
{
|
|
printf("%s: %02x:%02x:%02x:%02x:%02x:%02x", label, mac_addr[0],
|
|
mac_addr[1], mac_addr[2], mac_addr[3], mac_addr[4], mac_addr[5]);
|
|
}
|
|
|
|
static void print_ip(const void *packet)
|
|
{
|
|
u8 *p = (uint8_t *)packet;
|
|
u16 length;
|
|
u8 hdr_len;
|
|
|
|
puts("IP Header:\n");
|
|
if ((p[0] & 0xF0) != 0x40) {
|
|
printf("Invalid IP version %d\n", *p >> 4);
|
|
return;
|
|
}
|
|
hdr_len = *p & 0x0F;
|
|
if (hdr_len < 5)
|
|
printf("Invalid IP header length %d\n", hdr_len);
|
|
printf(" Version: 4, Header length: %d\n", hdr_len);
|
|
length = (p[2] << 8) | p[3];
|
|
printf(" TOS: 0x%02x, length: %d\n", p[1], length);
|
|
printf(" ID: %d, %s%s%s fragment offset: %d\n", (p[4] << 8) | p[5],
|
|
p[6] & 0x80 ? "congested, " : "", p[6] & 0x40 ? "DF, " : "",
|
|
p[6] & 0x20 ? "MF, " : "", ((p[6] & 0x1F) << 8) | p[7]);
|
|
printf(" TTL: %d, Protocol: %d, Header Checksum: 0x%x\n", p[8], p[9],
|
|
(p[10] << 8) | p[11]);
|
|
printf(" Source IP: %d.%d.%d.%d\n Destination IP: %d.%d.%d.%d\n",
|
|
p[12], p[13], p[14], p[15], p[16], p[17], p[18], p[19]);
|
|
if (p[9] == 17 || p[9] == 6)
|
|
printf(" Source port: %u, Destination port: %u\n",
|
|
(p[20] << 8) | p[21], (p[22] << 8) | p[23]);
|
|
puts("\n");
|
|
}
|
|
|
|
/**
|
|
* Prints out a packet for debugging purposes
|
|
*
|
|
* @param[in] packet - pointer to packet data
|
|
* @param length - length of packet in bytes
|
|
*/
|
|
static void print_packet(const void *packet, int length)
|
|
{
|
|
int i, j;
|
|
const unsigned char *up = packet;
|
|
u16 type = (up[12] << 8 | up[13]);
|
|
int start = 14;
|
|
|
|
print_mac("DMAC", &up[0]);
|
|
puts(" ");
|
|
print_mac("SMAC", &up[6]);
|
|
printf(" TYPE: %04x\n", type);
|
|
|
|
if (type == 0x0800)
|
|
print_ip(&up[start]);
|
|
|
|
for (i = start; (i + 16) < length; i += 16) {
|
|
printf("%04x ", i);
|
|
for (j = 0; j < 16; ++j)
|
|
printf("%02x ", up[i + j]);
|
|
|
|
printf(" ");
|
|
for (j = 0; j < 16; ++j)
|
|
printf("%c",
|
|
((up[i + j] >= ' ') && (up[i + j] <= '~')) ?
|
|
up[i + j] :
|
|
'.');
|
|
printf("\n");
|
|
}
|
|
printf("%04x ", i);
|
|
for (j = 0; i + j < length; ++j)
|
|
printf("%02x ", up[i + j]);
|
|
|
|
for (; j < 16; ++j)
|
|
printf(" ");
|
|
|
|
printf(" ");
|
|
for (j = 0; i + j < length; ++j)
|
|
printf("%c", ((up[i + j] >= ' ') && (up[i + j] <= '~')) ?
|
|
up[i + j] :
|
|
'.');
|
|
|
|
printf("\n");
|
|
}
|
|
#endif
|
|
|
|
/**
|
|
* String representation of error codes.
|
|
*/
|
|
static const char * const rx_error_codes[] = {
|
|
"OK",
|
|
"partial",
|
|
"jabber",
|
|
"overrun",
|
|
"oversize",
|
|
"alignment",
|
|
"fragment",
|
|
"fcs",
|
|
"undersize",
|
|
"extend",
|
|
"length mismatch",
|
|
"rgmii rx",
|
|
"skip error",
|
|
"nibble error (studder)",
|
|
"(undefined)",
|
|
"(undefined)",
|
|
"SPI 4.2 FCS",
|
|
"skip",
|
|
"L2 malformed",
|
|
};
|
|
|
|
/**
|
|
* Called to receive a packet
|
|
*
|
|
* @param dev - device to receive on
|
|
*
|
|
* @return - length of packet
|
|
*
|
|
* This function is used to poll packets. In turn it calls NetReceive
|
|
* to process the packets.
|
|
*/
|
|
static int nic_recv(struct udevice *dev, int flags, uchar **packetp)
|
|
{
|
|
cvmx_wqe_t *work = cvmx_pow_work_request_sync(CVMX_POW_WAIT);
|
|
struct octeon_eth_info *oct_eth_info = dev_get_priv(dev);
|
|
cvmx_buf_ptr_t buf_ptr;
|
|
void *packet_data;
|
|
int length;
|
|
int error_code;
|
|
|
|
if (!oct_eth_info->enabled) {
|
|
oct_eth_info->enabled = 1;
|
|
debug("%s: Enabling interface %s\n", __func__, dev->name);
|
|
octeon_eth_enable(dev);
|
|
}
|
|
|
|
if (!work) {
|
|
/*
|
|
* Somtimes the link is not up yet. Return here in this
|
|
* case, this function will be called again later.
|
|
*/
|
|
return 0;
|
|
}
|
|
|
|
error_code = cvmx_wqe_get_rcv_err(work);
|
|
if (error_code) {
|
|
/* Work has error, so drop */
|
|
cvmx_helper_free_packet_data(work);
|
|
cvmx_wqe_free(work);
|
|
if (error_code < ARRAY_SIZE(rx_error_codes) &&
|
|
!octeon_has_feature(OCTEON_FEATURE_BGX))
|
|
printf("Receive error (code %d: %s), dropping\n",
|
|
error_code, rx_error_codes[error_code]);
|
|
else
|
|
printf("Receive error (code %d (unknown), dropping\n",
|
|
error_code);
|
|
return 0;
|
|
}
|
|
if (cvmx_wqe_get_bufs(work) != 1) {
|
|
/* can only support single-buffer packets */
|
|
printf("Abnormal packet received in %u bufs, dropping\n",
|
|
cvmx_wqe_get_bufs(work));
|
|
length = cvmx_wqe_get_len(work);
|
|
buf_ptr = cvmx_wqe_get_packet_ptr(work);
|
|
packet_data = cvmx_phys_to_ptr(buf_ptr.s.addr);
|
|
print_packet(packet_data, length);
|
|
cvmx_helper_free_packet_data(work);
|
|
cvmx_wqe_free(work);
|
|
return 0;
|
|
}
|
|
|
|
buf_ptr = cvmx_wqe_get_packet_ptr(work);
|
|
packet_data = cvmx_phys_to_ptr(buf_ptr.s.addr);
|
|
length = cvmx_wqe_get_len(work);
|
|
|
|
oct_eth_info->packets_received++;
|
|
debug("############# got work: %p, len: %d, packet_ptr: %p\n", work,
|
|
length, packet_data);
|
|
#if defined(DEBUG_RX_PACKET)
|
|
if (packet_rx_debug) {
|
|
printf("\nRX packet: interface: %d, index: %d\n",
|
|
oct_eth_info->interface, oct_eth_info->index);
|
|
print_packet(packet_data, length);
|
|
}
|
|
#endif
|
|
*packetp = (uchar *)packet_data;
|
|
|
|
/* Save work for free_pkt() */
|
|
oct_eth_info->work = work;
|
|
|
|
/* Free WQE and packet data */
|
|
return length;
|
|
}
|
|
|
|
static int nic_free_pkt(struct udevice *dev, uchar *pkt, int pkt_len)
|
|
{
|
|
struct octeon_eth_info *oct_eth_info = dev_get_priv(dev);
|
|
cvmx_wqe_t *work = oct_eth_info->work;
|
|
|
|
if (!work)
|
|
return 0;
|
|
|
|
cvmx_helper_free_packet_data(work);
|
|
cvmx_wqe_free(work);
|
|
oct_eth_info->work = NULL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* Packet transmit
|
|
*
|
|
* @param skb Packet to send
|
|
* @param dev Device info structure
|
|
* @return Always returns zero
|
|
*/
|
|
static int cvm_oct_xmit(struct udevice *dev, void *packet, int len)
|
|
{
|
|
struct octeon_eth_info *priv = dev_get_priv(dev);
|
|
int queue = cvmx_pko_get_base_queue(priv->port);
|
|
cvmx_pko_command_word0_t pko_command;
|
|
cvmx_buf_ptr_t hw_buffer;
|
|
int rv;
|
|
|
|
debug("%s: addr: %p, len: %d\n", __func__, packet, len);
|
|
|
|
hw_buffer.u64 = 0;
|
|
hw_buffer.s.addr = cvmx_ptr_to_phys(packet);
|
|
hw_buffer.s.pool = CVMX_FPA_PACKET_POOL;
|
|
hw_buffer.s.size = len;
|
|
hw_buffer.s.back = 0;
|
|
|
|
/* Build the PKO command */
|
|
pko_command.u64 = 0;
|
|
pko_command.s.subone0 = 1;
|
|
pko_command.s.dontfree = 0;
|
|
pko_command.s.segs = 1;
|
|
pko_command.s.total_bytes = len;
|
|
/* Send the packet to the output queue */
|
|
|
|
debug("%s: port: %d, queue: %d\n", __func__, priv->port, queue);
|
|
cvmx_pko_send_packet_prepare(priv->port, queue, 0);
|
|
rv = cvmx_pko_send_packet_finish(priv->port, queue, pko_command,
|
|
hw_buffer, 0);
|
|
if (rv)
|
|
printf("Failed to send the packet rv=%d\n", rv);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int nic_xmit(struct udevice *dev, void *pkt, int pkt_len)
|
|
{
|
|
struct octeon_eth_info *oct_eth_info = dev_get_priv(dev);
|
|
void *fpa_buf = cvmx_fpa_alloc(CVMX_FPA_PACKET_POOL);
|
|
|
|
if (!oct_eth_info->enabled) {
|
|
oct_eth_info->enabled = 1;
|
|
octeon_eth_enable(dev);
|
|
}
|
|
|
|
/* We need to copy this to a FPA buffer, then give that to TX */
|
|
|
|
if (oct_eth_info->packets_sent == 0 &&
|
|
!octeon_has_feature(OCTEON_FEATURE_BGX))
|
|
cvm_oct_configure_rgmii_speed(dev);
|
|
|
|
if (!fpa_buf) {
|
|
printf("ERROR allocating buffer for packet!\n");
|
|
return -1;
|
|
}
|
|
|
|
memcpy(fpa_buf, pkt, pkt_len);
|
|
#ifdef DEBUG_TX_PACKET
|
|
if (packet_tx_debug) {
|
|
printf("\nTX packet: interface: %d, index: %d\n",
|
|
oct_eth_info->interface, oct_eth_info->index);
|
|
print_packet(pkt, pkt_len);
|
|
}
|
|
#endif
|
|
cvm_oct_xmit(dev, fpa_buf, pkt_len);
|
|
oct_eth_info->packets_sent++;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int nic_open(struct udevice *dev)
|
|
{
|
|
octeon_eth_init(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void octeon_eth_halt_bgx(struct udevice *dev,
|
|
cvmx_helper_interface_mode_t mode)
|
|
{
|
|
union cvmx_bgxx_cmrx_config cmr_config;
|
|
union cvmx_bgxx_cmr_rx_adrx_cam cmr_cam;
|
|
struct octeon_eth_info *oct_eth_info = dev_get_priv(dev);
|
|
int index = oct_eth_info->index;
|
|
int xiface = oct_eth_info->interface;
|
|
struct cvmx_xiface xi = cvmx_helper_xiface_to_node_interface(xiface);
|
|
|
|
debug("%s(%s(%d.%d), %d)\n", __func__, dev->name, xiface, index, mode);
|
|
|
|
/* For RGMII we need to properly shut down the XCV interface */
|
|
if (cvmx_helper_bgx_is_rgmii(xiface, index)) {
|
|
debug(" Shut down XCV RGMII\n");
|
|
octeon_bgx_xcv_rgmii_enable(xi.interface, index, false);
|
|
} else {
|
|
cmr_config.u64 = csr_rd_node(xi.node,
|
|
CVMX_BGXX_CMRX_CONFIG(index, xi.interface));
|
|
cmr_config.s.data_pkt_tx_en = 0;
|
|
cmr_config.s.data_pkt_rx_en = 0;
|
|
csr_wr_node(xi.node, CVMX_BGXX_CMRX_CONFIG(index, xi.interface),
|
|
cmr_config.u64);
|
|
|
|
cmr_cam.u64 = csr_rd_node(xi.node,
|
|
CVMX_BGXX_CMR_RX_ADRX_CAM(index * 8, xi.interface));
|
|
cmr_cam.s.en = 0;
|
|
csr_wr_node(xi.node,
|
|
CVMX_BGXX_CMR_RX_ADRX_CAM(index * 8, xi.interface),
|
|
cmr_cam.u64);
|
|
oct_eth_info->last_bgx_mac = 0;
|
|
oct_eth_info->bgx_mac_set = 0;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* Halts the specified Ethernet interface preventing it from receiving any more
|
|
* packets.
|
|
*
|
|
* @param dev - Ethernet device to shut down.
|
|
*/
|
|
void octeon_eth_halt(struct udevice *dev)
|
|
{
|
|
struct octeon_eth_info *oct_eth_info = dev_get_priv(dev);
|
|
int index = oct_eth_info->index;
|
|
int interface = oct_eth_info->interface;
|
|
cvmx_helper_interface_mode_t mode;
|
|
union cvmx_gmxx_rxx_adr_ctl adr_ctl;
|
|
cvmx_gmxx_prtx_cfg_t gmx_cfg;
|
|
u64 tmp;
|
|
|
|
debug("%s(%s): Halting\n", __func__, dev->name);
|
|
|
|
oct_eth_info->enabled = 0;
|
|
|
|
mode = cvmx_helper_interface_get_mode(oct_eth_info->interface);
|
|
if (octeon_has_feature(OCTEON_FEATURE_BGX)) {
|
|
octeon_eth_halt_bgx(dev, mode);
|
|
return;
|
|
}
|
|
|
|
/* Stop SCC */
|
|
/* Disable reception on this port at the GMX block */
|
|
switch (mode) {
|
|
case CVMX_HELPER_INTERFACE_MODE_RGMII:
|
|
case CVMX_HELPER_INTERFACE_MODE_GMII:
|
|
debug(" RGMII/GMII\n");
|
|
tmp = csr_rd(CVMX_ASXX_RX_PRT_EN(oct_eth_info->interface));
|
|
tmp &= ~(1ull << index);
|
|
/* Disable the RGMII RX ports */
|
|
csr_wr(CVMX_ASXX_RX_PRT_EN(oct_eth_info->interface), tmp);
|
|
tmp = csr_rd(CVMX_ASXX_TX_PRT_EN(oct_eth_info->interface));
|
|
tmp &= ~(1ull << index);
|
|
/* Disable the RGMII TX ports */
|
|
csr_wr(CVMX_ASXX_TX_PRT_EN(oct_eth_info->interface), tmp);
|
|
/* No break! */
|
|
case CVMX_HELPER_INTERFACE_MODE_SGMII:
|
|
case CVMX_HELPER_INTERFACE_MODE_QSGMII:
|
|
case CVMX_HELPER_INTERFACE_MODE_XAUI:
|
|
case CVMX_HELPER_INTERFACE_MODE_RXAUI:
|
|
case CVMX_HELPER_INTERFACE_MODE_XLAUI:
|
|
case CVMX_HELPER_INTERFACE_MODE_XFI:
|
|
case CVMX_HELPER_INTERFACE_MODE_10G_KR:
|
|
case CVMX_HELPER_INTERFACE_MODE_40G_KR4:
|
|
case CVMX_HELPER_INTERFACE_MODE_MIXED:
|
|
case CVMX_HELPER_INTERFACE_MODE_AGL:
|
|
/* Disable MAC filtering */
|
|
gmx_cfg.u64 = csr_rd(oct_eth_info->gmx_base + GMX_PRT_CFG);
|
|
csr_wr(oct_eth_info->gmx_base + GMX_PRT_CFG,
|
|
gmx_cfg.u64 & ~1ull);
|
|
adr_ctl.u64 = 0;
|
|
adr_ctl.s.bcst = 1; /* Reject broadcast */
|
|
csr_wr(oct_eth_info->gmx_base + GMX_RX_ADR_CTL, adr_ctl.u64);
|
|
csr_wr(oct_eth_info->gmx_base + GMX_RX_ADR_CAM_EN, 0);
|
|
csr_wr(oct_eth_info->gmx_base + GMX_PRT_CFG, gmx_cfg.u64);
|
|
break;
|
|
default:
|
|
printf("%s: Unknown mode %d for interface 0x%x:%d\n", __func__,
|
|
mode, interface, index);
|
|
break;
|
|
}
|
|
}
|
|
|
|
void nic_stop(struct udevice *dev)
|
|
{
|
|
octeon_eth_halt(dev);
|
|
}
|
|
|
|
int nic_write_hwaddr(struct udevice *dev)
|
|
{
|
|
cvm_oct_set_mac_address(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct eth_ops octeon_nic_ops = {
|
|
.start = nic_open,
|
|
.stop = nic_stop,
|
|
.send = nic_xmit,
|
|
.recv = nic_recv,
|
|
.free_pkt = nic_free_pkt,
|
|
.write_hwaddr = nic_write_hwaddr,
|
|
};
|
|
|
|
static const struct udevice_id octeon_nic_ids[] = {
|
|
{ .compatible = "cavium,octeon-7890-bgx" },
|
|
{}
|
|
};
|
|
|
|
U_BOOT_DRIVER(octeon_nic) = {
|
|
.name = "octeon_nic",
|
|
.id = UCLASS_ETH,
|
|
.probe = octeon_nic_probe,
|
|
.of_match = octeon_nic_ids,
|
|
.ops = &octeon_nic_ops,
|
|
.priv_auto = sizeof(struct octeon_eth_info),
|
|
};
|