mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-16 17:58:23 +00:00
3feea0ba19
Now, spi_flash_probe_bus_cs() relies on DT for spi speed and mode and logically calls spi_get_bus_and_cs(). In case spi mode and speed are not read from DT, make usage of spi_flash_probe() instead. To sum-up: - Previous call tree was: spi_flash_probe() -> spi_flash_probe_bus_cs() -> spi_get_bus_and_cs() - Current call tree is: spi_flash_probe() -> _spi_get_bus_and_cs() spi_flash_probe_bus_cs() -> spi_get_bus_and_cs() This patch impacts the following : - cmd/sf.c: if spi mode and/or speed is passed in argument of do_spi_flash_probe(), call spi_flash_probe() otherwise call spi_flash_probe_bus_cs(). - drivers/net/fm/fm.c: as by default spi speed and mode was set to 0 and a comment indicates that speed and mode are read from DT, use spi_flash_probe_bus_cs(). - drivers/net/pfe_eth/pfe_firmware.c: spi speed and mode are not read from DT by all platforms using this driver, so keep legacy and replace spi_flash_probe_bus_cs() by spi_flash_probe(); - drivers/net/sni_netsec.c : spi speed and mode are not read from DT, so replace spi_flash_probe_bus_cs() by spi_flash_probe(). - drivers/usb/gadget/max3420_udc.c: Can't find any platform which make usage of this driver, nevertheless, keep legacy and replace spi_get_bus_and_cs() by _spi_get_bus_and_cs(). - env/sf.c: a comment indicates that speed and mode are read from DT. So use spi_flash_probe_bus_cs(). Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Marek Behun <marek.behun@nic.cz> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Vignesh R <vigneshr@ti.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Ramon Fried <rfried.dev@gmail.com> Cc: Lukasz Majewski <lukma@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Stefan Roese <sr@denx.de> Cc: "Pali Rohár" <pali@kernel.org> Cc: Konstantin Porotchkin <kostap@marvell.com> Cc: Igal Liberman <igall@marvell.com> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Pratyush Yadav <p.yadav@ti.com> Cc: Sean Anderson <seanga2@gmail.com> Cc: Anji J <anji.jagarlmudi@nxp.com> Cc: Biwen Li <biwen.li@nxp.com> Cc: Priyanka Jain <priyanka.jain@nxp.com> Cc: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>
1119 lines
28 KiB
C
1119 lines
28 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/**
|
|
* netsec.c - Socionext Synquacer Netsec driver
|
|
* Copyright 2021 Linaro Ltd.
|
|
*/
|
|
|
|
#include <clk.h>
|
|
#include <cpu_func.h>
|
|
#include <dm.h>
|
|
#include <fdt_support.h>
|
|
#include <log.h>
|
|
#include <malloc.h>
|
|
#include <miiphy.h>
|
|
#include <net.h>
|
|
#include <regmap.h>
|
|
#include <reset.h>
|
|
#include <syscon.h>
|
|
#include <asm/cache.h>
|
|
#include <asm/global_data.h>
|
|
#include <dm/device_compat.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
#include <linux/io.h>
|
|
#include <linux/iopoll.h>
|
|
#include <spi.h>
|
|
#include <spi_flash.h>
|
|
|
|
#define NETSEC_REG_SOFT_RST 0x104
|
|
#define NETSEC_REG_COM_INIT 0x120
|
|
|
|
#define NETSEC_REG_TOP_STATUS 0x200
|
|
#define NETSEC_IRQ_RX BIT(1)
|
|
#define NETSEC_IRQ_TX BIT(0)
|
|
|
|
#define NETSEC_REG_TOP_INTEN 0x204
|
|
#define NETSEC_REG_INTEN_SET 0x234
|
|
#define NETSEC_REG_INTEN_CLR 0x238
|
|
|
|
#define NETSEC_REG_NRM_TX_STATUS 0x400
|
|
#define NETSEC_REG_NRM_TX_INTEN 0x404
|
|
#define NETSEC_REG_NRM_TX_INTEN_SET 0x428
|
|
#define NETSEC_REG_NRM_TX_INTEN_CLR 0x42c
|
|
#define NRM_TX_ST_NTOWNR BIT(17)
|
|
#define NRM_TX_ST_TR_ERR BIT(16)
|
|
#define NRM_TX_ST_TXDONE BIT(15)
|
|
#define NRM_TX_ST_TMREXP BIT(14)
|
|
|
|
#define NETSEC_REG_NRM_RX_STATUS 0x440
|
|
#define NETSEC_REG_NRM_RX_INTEN 0x444
|
|
#define NETSEC_REG_NRM_RX_INTEN_SET 0x468
|
|
#define NETSEC_REG_NRM_RX_INTEN_CLR 0x46c
|
|
#define NRM_RX_ST_RC_ERR BIT(16)
|
|
#define NRM_RX_ST_PKTCNT BIT(15)
|
|
#define NRM_RX_ST_TMREXP BIT(14)
|
|
|
|
#define NETSEC_REG_PKT_CMD_BUF 0xd0
|
|
|
|
#define NETSEC_REG_CLK_EN 0x100
|
|
|
|
#define NETSEC_REG_PKT_CTRL 0x140
|
|
|
|
#define NETSEC_REG_DMA_TMR_CTRL 0x20c
|
|
#define NETSEC_REG_F_TAIKI_MC_VER 0x22c
|
|
#define NETSEC_REG_F_TAIKI_VER 0x230
|
|
#define NETSEC_REG_DMA_HM_CTRL 0x214
|
|
#define NETSEC_REG_DMA_MH_CTRL 0x220
|
|
#define NETSEC_REG_ADDR_DIS_CORE 0x218
|
|
#define NETSEC_REG_DMAC_HM_CMD_BUF 0x210
|
|
#define NETSEC_REG_DMAC_MH_CMD_BUF 0x21c
|
|
|
|
#define NETSEC_REG_NRM_TX_PKTCNT 0x410
|
|
|
|
#define NETSEC_REG_NRM_TX_DONE_PKTCNT 0x414
|
|
#define NETSEC_REG_NRM_TX_DONE_TXINT_PKTCNT 0x418
|
|
|
|
#define NETSEC_REG_NRM_TX_TMR 0x41c
|
|
|
|
#define NETSEC_REG_NRM_RX_PKTCNT 0x454
|
|
#define NETSEC_REG_NRM_RX_RXINT_PKTCNT 0x458
|
|
#define NETSEC_REG_NRM_TX_TXINT_TMR 0x420
|
|
#define NETSEC_REG_NRM_RX_RXINT_TMR 0x460
|
|
|
|
#define NETSEC_REG_NRM_RX_TMR 0x45c
|
|
|
|
#define NETSEC_REG_NRM_TX_DESC_START_UP 0x434
|
|
#define NETSEC_REG_NRM_TX_DESC_START_LW 0x408
|
|
#define NETSEC_REG_NRM_RX_DESC_START_UP 0x474
|
|
#define NETSEC_REG_NRM_RX_DESC_START_LW 0x448
|
|
|
|
#define NETSEC_REG_NRM_TX_CONFIG 0x430
|
|
#define NETSEC_REG_NRM_RX_CONFIG 0x470
|
|
|
|
#define MAC_REG_STATUS 0x1024
|
|
#define MAC_REG_DATA 0x11c0
|
|
#define MAC_REG_CMD 0x11c4
|
|
#define MAC_REG_FLOW_TH 0x11cc
|
|
#define MAC_REG_INTF_SEL 0x11d4
|
|
#define MAC_REG_DESC_INIT 0x11fc
|
|
#define MAC_REG_DESC_SOFT_RST 0x1204
|
|
#define NETSEC_REG_MODE_TRANS_COMP_STATUS 0x500
|
|
|
|
#define GMAC_REG_MCR 0x0000
|
|
#define GMAC_REG_MFFR 0x0004
|
|
#define GMAC_REG_GAR 0x0010
|
|
#define GMAC_REG_GDR 0x0014
|
|
#define GMAC_REG_FCR 0x0018
|
|
#define GMAC_REG_BMR 0x1000
|
|
#define GMAC_REG_RDLAR 0x100c
|
|
#define GMAC_REG_TDLAR 0x1010
|
|
#define GMAC_REG_OMR 0x1018
|
|
|
|
#define MHZ(n) ((n) * 1000 * 1000)
|
|
|
|
#define NETSEC_TX_SHIFT_OWN_FIELD 31
|
|
#define NETSEC_TX_SHIFT_LD_FIELD 30
|
|
#define NETSEC_TX_SHIFT_DRID_FIELD 24
|
|
#define NETSEC_TX_SHIFT_PT_FIELD 21
|
|
#define NETSEC_TX_SHIFT_TDRID_FIELD 16
|
|
#define NETSEC_TX_SHIFT_CC_FIELD 15
|
|
#define NETSEC_TX_SHIFT_FS_FIELD 9
|
|
#define NETSEC_TX_LAST 8
|
|
#define NETSEC_TX_SHIFT_CO 7
|
|
#define NETSEC_TX_SHIFT_SO 6
|
|
#define NETSEC_TX_SHIFT_TRS_FIELD 4
|
|
|
|
#define NETSEC_RX_PKT_OWN_FIELD 31
|
|
#define NETSEC_RX_PKT_LD_FIELD 30
|
|
#define NETSEC_RX_PKT_SDRID_FIELD 24
|
|
#define NETSEC_RX_PKT_FR_FIELD 23
|
|
#define NETSEC_RX_PKT_ER_FIELD 21
|
|
#define NETSEC_RX_PKT_ERR_FIELD 16
|
|
#define NETSEC_RX_PKT_TDRID_FIELD 12
|
|
#define NETSEC_RX_PKT_FS_FIELD 9
|
|
#define NETSEC_RX_PKT_LS_FIELD 8
|
|
#define NETSEC_RX_PKT_CO_FIELD 6
|
|
|
|
#define NETSEC_RX_PKT_ERR_MASK 3
|
|
|
|
#define NETSEC_MAX_TX_PKT_LEN 1518
|
|
#define NETSEC_MAX_TX_JUMBO_PKT_LEN 9018
|
|
|
|
#define NETSEC_RING_GMAC 15
|
|
#define NETSEC_RING_MAX 2
|
|
|
|
#define NETSEC_TCP_SEG_LEN_MAX 1460
|
|
#define NETSEC_TCP_JUMBO_SEG_LEN_MAX 8960
|
|
|
|
#define NETSEC_RX_CKSUM_NOTAVAIL 0
|
|
#define NETSEC_RX_CKSUM_OK 1
|
|
#define NETSEC_RX_CKSUM_NG 2
|
|
|
|
#define NETSEC_TOP_IRQ_REG_ME_START BIT(20)
|
|
#define NETSEC_IRQ_TRANSITION_COMPLETE BIT(4)
|
|
|
|
#define NETSEC_MODE_TRANS_COMP_IRQ_N2T BIT(20)
|
|
#define NETSEC_MODE_TRANS_COMP_IRQ_T2N BIT(19)
|
|
|
|
#define NETSEC_INT_PKTCNT_MAX 2047
|
|
|
|
#define NETSEC_FLOW_START_TH_MAX 95
|
|
#define NETSEC_FLOW_STOP_TH_MAX 95
|
|
#define NETSEC_FLOW_PAUSE_TIME_MIN 5
|
|
|
|
#define NETSEC_CLK_EN_REG_DOM_ALL 0x3f
|
|
|
|
#define NETSEC_PKT_CTRL_REG_MODE_NRM BIT(28)
|
|
#define NETSEC_PKT_CTRL_REG_EN_JUMBO BIT(27)
|
|
#define NETSEC_PKT_CTRL_REG_LOG_CHKSUM_ER BIT(3)
|
|
#define NETSEC_PKT_CTRL_REG_LOG_HD_INCOMPLETE BIT(2)
|
|
#define NETSEC_PKT_CTRL_REG_LOG_HD_ER BIT(1)
|
|
#define NETSEC_PKT_CTRL_REG_DRP_NO_MATCH BIT(0)
|
|
|
|
#define NETSEC_CLK_EN_REG_DOM_G BIT(5)
|
|
#define NETSEC_CLK_EN_REG_DOM_C BIT(1)
|
|
#define NETSEC_CLK_EN_REG_DOM_D BIT(0)
|
|
|
|
#define NETSEC_COM_INIT_REG_DB BIT(2)
|
|
#define NETSEC_COM_INIT_REG_CLS BIT(1)
|
|
#define NETSEC_COM_INIT_REG_ALL (NETSEC_COM_INIT_REG_CLS | \
|
|
NETSEC_COM_INIT_REG_DB)
|
|
|
|
#define NETSEC_SOFT_RST_REG_RESET 0
|
|
#define NETSEC_SOFT_RST_REG_RUN BIT(31)
|
|
|
|
#define NETSEC_DMA_CTRL_REG_STOP 1
|
|
#define MH_CTRL__MODE_TRANS BIT(20)
|
|
|
|
#define NETSEC_GMAC_CMD_ST_READ 0
|
|
#define NETSEC_GMAC_CMD_ST_WRITE BIT(28)
|
|
#define NETSEC_GMAC_CMD_ST_BUSY BIT(31)
|
|
|
|
#define NETSEC_GMAC_BMR_REG_COMMON 0x00412080
|
|
#define NETSEC_GMAC_BMR_REG_RESET 0x00020181
|
|
#define NETSEC_GMAC_BMR_REG_SWR 0x00000001
|
|
|
|
#define NETSEC_GMAC_OMR_REG_ST BIT(13)
|
|
#define NETSEC_GMAC_OMR_REG_SR BIT(1)
|
|
|
|
#define NETSEC_GMAC_MCR_REG_IBN BIT(30)
|
|
#define NETSEC_GMAC_MCR_REG_CST BIT(25)
|
|
#define NETSEC_GMAC_MCR_REG_JE BIT(20)
|
|
#define NETSEC_MCR_PS BIT(15)
|
|
#define NETSEC_GMAC_MCR_REG_FES BIT(14)
|
|
#define NETSEC_GMAC_MCR_REG_FULL_DUPLEX_COMMON 0x0000280c
|
|
#define NETSEC_GMAC_MCR_REG_HALF_DUPLEX_COMMON 0x0001a00c
|
|
|
|
#define NETSEC_FCR_RFE BIT(2)
|
|
#define NETSEC_FCR_TFE BIT(1)
|
|
|
|
#define NETSEC_GMAC_GAR_REG_GW BIT(1)
|
|
#define NETSEC_GMAC_GAR_REG_GB BIT(0)
|
|
|
|
#define NETSEC_GMAC_GAR_REG_SHIFT_PA 11
|
|
#define NETSEC_GMAC_GAR_REG_SHIFT_GR 6
|
|
#define GMAC_REG_SHIFT_CR_GAR 2
|
|
|
|
#define NETSEC_GMAC_GAR_REG_CR_25_35_MHZ 2
|
|
#define NETSEC_GMAC_GAR_REG_CR_35_60_MHZ 3
|
|
#define NETSEC_GMAC_GAR_REG_CR_60_100_MHZ 0
|
|
#define NETSEC_GMAC_GAR_REG_CR_100_150_MHZ 1
|
|
#define NETSEC_GMAC_GAR_REG_CR_150_250_MHZ 4
|
|
#define NETSEC_GMAC_GAR_REG_CR_250_300_MHZ 5
|
|
|
|
#define NETSEC_GMAC_RDLAR_REG_COMMON 0x18000
|
|
#define NETSEC_GMAC_TDLAR_REG_COMMON 0x1c000
|
|
|
|
#define NETSEC_REG_NETSEC_VER_F_TAIKI 0x50000
|
|
|
|
#define NETSEC_REG_DESC_RING_CONFIG_CFG_UP BIT(31)
|
|
#define NETSEC_REG_DESC_RING_CONFIG_CH_RST BIT(30)
|
|
#define NETSEC_REG_DESC_TMR_MODE 4
|
|
#define NETSEC_REG_DESC_ENDIAN 0
|
|
|
|
#define NETSEC_MAC_DESC_SOFT_RST_SOFT_RST 1
|
|
#define NETSEC_MAC_DESC_INIT_REG_INIT 1
|
|
|
|
#define NETSEC_EEPROM_MAC_ADDRESS 0x00
|
|
#define NETSEC_EEPROM_HM_ME_ADDRESS_H 0x08
|
|
#define NETSEC_EEPROM_HM_ME_ADDRESS_L 0x0C
|
|
#define NETSEC_EEPROM_HM_ME_SIZE 0x10
|
|
#define NETSEC_EEPROM_MH_ME_ADDRESS_H 0x14
|
|
#define NETSEC_EEPROM_MH_ME_ADDRESS_L 0x18
|
|
#define NETSEC_EEPROM_MH_ME_SIZE 0x1C
|
|
#define NETSEC_EEPROM_PKT_ME_ADDRESS 0x20
|
|
#define NETSEC_EEPROM_PKT_ME_SIZE 0x24
|
|
|
|
#define DESC_SZ sizeof(struct netsec_de)
|
|
|
|
#define NETSEC_F_NETSEC_VER_MAJOR_NUM(x) ((x) & 0xffff0000)
|
|
|
|
#define EERPROM_MAP_OFFSET 0x8000000
|
|
#define NOR_BLOCK 1024
|
|
|
|
struct netsec_de { /* Netsec Descriptor layout */
|
|
u32 attr;
|
|
u32 data_buf_addr_up;
|
|
u32 data_buf_addr_lw;
|
|
u32 buf_len_info;
|
|
};
|
|
|
|
struct netsec_priv {
|
|
struct netsec_de rxde[PKTBUFSRX];
|
|
struct netsec_de txde[1];
|
|
u16 rxat;
|
|
|
|
phys_addr_t eeprom_base;
|
|
phys_addr_t ioaddr;
|
|
|
|
struct mii_dev *bus;
|
|
struct phy_device *phydev;
|
|
u32 phy_addr, freq;
|
|
int phy_mode;
|
|
int max_speed;
|
|
};
|
|
|
|
struct netsec_tx_pkt_ctrl {
|
|
u16 tcp_seg_len;
|
|
bool tcp_seg_offload_flag;
|
|
bool cksum_offload_flag;
|
|
};
|
|
|
|
struct netsec_rx_pkt_info {
|
|
int rx_cksum_result;
|
|
int err_code;
|
|
bool err_flag;
|
|
};
|
|
|
|
static void netsec_write_reg(struct netsec_priv *priv, u32 reg_addr, u32 val)
|
|
{
|
|
writel(val, priv->ioaddr + reg_addr);
|
|
}
|
|
|
|
static u32 netsec_read_reg(struct netsec_priv *priv, u32 reg_addr)
|
|
{
|
|
return readl(priv->ioaddr + reg_addr);
|
|
}
|
|
|
|
/************* MDIO BUS OPS FOLLOW *************/
|
|
|
|
#define TIMEOUT_SPINS_MAC 1000
|
|
#define TIMEOUT_SECONDARY_MS_MAC 100
|
|
|
|
static u32 netsec_clk_type(u32 freq)
|
|
{
|
|
if (freq < MHZ(35))
|
|
return NETSEC_GMAC_GAR_REG_CR_25_35_MHZ;
|
|
if (freq < MHZ(60))
|
|
return NETSEC_GMAC_GAR_REG_CR_35_60_MHZ;
|
|
if (freq < MHZ(100))
|
|
return NETSEC_GMAC_GAR_REG_CR_60_100_MHZ;
|
|
if (freq < MHZ(150))
|
|
return NETSEC_GMAC_GAR_REG_CR_100_150_MHZ;
|
|
if (freq < MHZ(250))
|
|
return NETSEC_GMAC_GAR_REG_CR_150_250_MHZ;
|
|
|
|
return NETSEC_GMAC_GAR_REG_CR_250_300_MHZ;
|
|
}
|
|
|
|
static int netsec_wait_while_busy(struct netsec_priv *priv, u32 addr, u32 mask)
|
|
{
|
|
u32 timeout = TIMEOUT_SPINS_MAC;
|
|
|
|
while (--timeout && netsec_read_reg(priv, addr) & mask)
|
|
cpu_relax();
|
|
if (timeout)
|
|
return 0;
|
|
|
|
timeout = TIMEOUT_SECONDARY_MS_MAC;
|
|
while (--timeout && netsec_read_reg(priv, addr) & mask)
|
|
udelay(2000);
|
|
|
|
if (timeout)
|
|
return 0;
|
|
|
|
pr_err("%s: timeout\n", __func__);
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static int netsec_set_mac_reg(struct netsec_priv *priv, u32 addr, u32 value)
|
|
{
|
|
netsec_write_reg(priv, MAC_REG_DATA, value);
|
|
netsec_write_reg(priv, MAC_REG_CMD, addr | NETSEC_GMAC_CMD_ST_WRITE);
|
|
return netsec_wait_while_busy(priv,
|
|
MAC_REG_CMD, NETSEC_GMAC_CMD_ST_BUSY);
|
|
}
|
|
|
|
static int netsec_get_mac_reg(struct netsec_priv *priv, u32 addr, u32 *read)
|
|
{
|
|
int ret;
|
|
|
|
netsec_write_reg(priv, MAC_REG_CMD, addr | NETSEC_GMAC_CMD_ST_READ);
|
|
ret = netsec_wait_while_busy(priv,
|
|
MAC_REG_CMD, NETSEC_GMAC_CMD_ST_BUSY);
|
|
if (ret)
|
|
return ret;
|
|
|
|
*read = netsec_read_reg(priv, MAC_REG_DATA);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int netsec_mac_wait_while_busy(struct netsec_priv *priv,
|
|
u32 addr, u32 mask)
|
|
{
|
|
u32 timeout = TIMEOUT_SPINS_MAC;
|
|
u32 data;
|
|
int ret;
|
|
|
|
do {
|
|
ret = netsec_get_mac_reg(priv, addr, &data);
|
|
if (ret)
|
|
break;
|
|
udelay(1);
|
|
} while (--timeout && (data & mask));
|
|
|
|
if (timeout)
|
|
return 0;
|
|
|
|
timeout = TIMEOUT_SECONDARY_MS_MAC;
|
|
do {
|
|
udelay(2000);
|
|
|
|
ret = netsec_get_mac_reg(priv, addr, &data);
|
|
if (ret)
|
|
break;
|
|
cpu_relax();
|
|
} while (--timeout && (data & mask));
|
|
|
|
if (timeout && !ret)
|
|
return 0;
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static void netsec_cache_invalidate(uintptr_t vaddr, int len)
|
|
{
|
|
invalidate_dcache_range(rounddown(vaddr, ARCH_DMA_MINALIGN),
|
|
roundup(vaddr + len, ARCH_DMA_MINALIGN));
|
|
}
|
|
|
|
static void netsec_cache_flush(uintptr_t vaddr, int len)
|
|
{
|
|
flush_dcache_range(rounddown(vaddr, ARCH_DMA_MINALIGN),
|
|
roundup(vaddr + len, ARCH_DMA_MINALIGN));
|
|
}
|
|
|
|
static void netsec_set_rx_de(struct netsec_priv *priv, u16 idx, void *addr)
|
|
{
|
|
struct netsec_de *de = &priv->rxde[idx];
|
|
u32 attr = (1 << NETSEC_RX_PKT_OWN_FIELD) |
|
|
(1 << NETSEC_RX_PKT_FS_FIELD) |
|
|
(1 << NETSEC_RX_PKT_LS_FIELD);
|
|
|
|
if (idx == PKTBUFSRX - 1)
|
|
attr |= (1 << NETSEC_RX_PKT_LD_FIELD);
|
|
|
|
de->data_buf_addr_up = upper_32_bits((dma_addr_t)addr);
|
|
de->data_buf_addr_lw = lower_32_bits((dma_addr_t)addr);
|
|
de->buf_len_info = PKTSIZE;
|
|
de->attr = attr;
|
|
dmb();
|
|
netsec_cache_flush((uintptr_t)de, sizeof(*de));
|
|
}
|
|
|
|
static void netsec_set_tx_de(struct netsec_priv *priv, void *addr, int len)
|
|
{
|
|
struct netsec_de *de = &priv->txde[0];
|
|
u32 attr;
|
|
|
|
attr = (1 << NETSEC_TX_SHIFT_OWN_FIELD) |
|
|
(1 << NETSEC_TX_SHIFT_PT_FIELD) |
|
|
(NETSEC_RING_GMAC << NETSEC_TX_SHIFT_TDRID_FIELD) |
|
|
(1 << NETSEC_TX_SHIFT_FS_FIELD) |
|
|
(1 << NETSEC_TX_LAST) |
|
|
(1 << NETSEC_TX_SHIFT_TRS_FIELD) |
|
|
(1 << NETSEC_TX_SHIFT_LD_FIELD);
|
|
|
|
de->data_buf_addr_up = upper_32_bits((dma_addr_t)addr);
|
|
de->data_buf_addr_lw = lower_32_bits((dma_addr_t)addr);
|
|
de->buf_len_info = len;
|
|
de->attr = attr;
|
|
dmb();
|
|
netsec_cache_flush((uintptr_t)de, sizeof(*de));
|
|
}
|
|
|
|
static int netsec_get_phy_reg(struct netsec_priv *priv,
|
|
int phy_addr, int reg_addr)
|
|
{
|
|
u32 data;
|
|
int ret;
|
|
|
|
if (phy_addr != 7)
|
|
return -EINVAL;
|
|
|
|
if (netsec_set_mac_reg(priv, GMAC_REG_GAR, NETSEC_GMAC_GAR_REG_GB |
|
|
phy_addr << NETSEC_GMAC_GAR_REG_SHIFT_PA |
|
|
reg_addr << NETSEC_GMAC_GAR_REG_SHIFT_GR |
|
|
(netsec_clk_type(priv->freq) <<
|
|
GMAC_REG_SHIFT_CR_GAR)))
|
|
return -ETIMEDOUT;
|
|
|
|
ret = netsec_mac_wait_while_busy(priv, GMAC_REG_GAR,
|
|
NETSEC_GMAC_GAR_REG_GB);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = netsec_get_mac_reg(priv, GMAC_REG_GDR, &data);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return data;
|
|
}
|
|
|
|
static int netsec_set_phy_reg(struct netsec_priv *priv,
|
|
int phy_addr, int reg_addr, u16 val)
|
|
{
|
|
int ret;
|
|
|
|
if (phy_addr != 7)
|
|
return -EINVAL;
|
|
if (netsec_set_mac_reg(priv, GMAC_REG_GDR, val))
|
|
return -ETIMEDOUT;
|
|
|
|
if (netsec_set_mac_reg(priv, GMAC_REG_GAR,
|
|
phy_addr << NETSEC_GMAC_GAR_REG_SHIFT_PA |
|
|
reg_addr << NETSEC_GMAC_GAR_REG_SHIFT_GR |
|
|
NETSEC_GMAC_GAR_REG_GW | NETSEC_GMAC_GAR_REG_GB |
|
|
(netsec_clk_type(priv->freq) <<
|
|
GMAC_REG_SHIFT_CR_GAR)))
|
|
return -ETIMEDOUT;
|
|
|
|
ret = netsec_mac_wait_while_busy(priv, GMAC_REG_GAR,
|
|
NETSEC_GMAC_GAR_REG_GB);
|
|
|
|
/* Developerbox implements RTL8211E PHY and there is
|
|
* a compatibility problem with F_GMAC4.
|
|
* RTL8211E expects MDC clock must be kept toggling for several
|
|
* clock cycle with MDIO high before entering the IDLE state.
|
|
* To meet this requirement, netsec driver needs to issue dummy
|
|
* read(e.g. read PHYID1(offset 0x2) register) right after write.
|
|
*/
|
|
netsec_get_phy_reg(priv, phy_addr, MII_PHYSID1);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int netsec_mac_update_to_phy_state(struct netsec_priv *priv)
|
|
{
|
|
struct phy_device *phydev = priv->phydev;
|
|
u32 value = 0;
|
|
|
|
value = phydev->duplex ? NETSEC_GMAC_MCR_REG_FULL_DUPLEX_COMMON :
|
|
NETSEC_GMAC_MCR_REG_HALF_DUPLEX_COMMON;
|
|
|
|
if (phydev->speed != SPEED_1000)
|
|
value |= NETSEC_MCR_PS;
|
|
|
|
if (phydev->interface != PHY_INTERFACE_MODE_GMII &&
|
|
phydev->speed == SPEED_100)
|
|
value |= NETSEC_GMAC_MCR_REG_FES;
|
|
|
|
value |= NETSEC_GMAC_MCR_REG_CST | NETSEC_GMAC_MCR_REG_JE;
|
|
|
|
if (phy_interface_is_rgmii(phydev))
|
|
value |= NETSEC_GMAC_MCR_REG_IBN;
|
|
|
|
if (netsec_set_mac_reg(priv, GMAC_REG_MCR, value))
|
|
return -ETIMEDOUT;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int netsec_start_gmac(struct netsec_priv *priv)
|
|
{
|
|
u32 value = 0;
|
|
int ret;
|
|
|
|
if (priv->max_speed != SPEED_1000)
|
|
value = (NETSEC_GMAC_MCR_REG_CST |
|
|
NETSEC_GMAC_MCR_REG_HALF_DUPLEX_COMMON);
|
|
|
|
if (netsec_set_mac_reg(priv, GMAC_REG_MCR, value))
|
|
return -ETIMEDOUT;
|
|
|
|
if (netsec_set_mac_reg(priv, GMAC_REG_BMR,
|
|
NETSEC_GMAC_BMR_REG_RESET))
|
|
return -ETIMEDOUT;
|
|
|
|
/* Wait soft reset */
|
|
mdelay(5);
|
|
|
|
ret = netsec_get_mac_reg(priv, GMAC_REG_BMR, &value);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (value & NETSEC_GMAC_BMR_REG_SWR)
|
|
return -EAGAIN;
|
|
|
|
netsec_write_reg(priv, MAC_REG_DESC_SOFT_RST, 1);
|
|
if (netsec_wait_while_busy(priv, MAC_REG_DESC_SOFT_RST, 1))
|
|
return -ETIMEDOUT;
|
|
|
|
netsec_write_reg(priv, MAC_REG_DESC_INIT, 1);
|
|
if (netsec_wait_while_busy(priv, MAC_REG_DESC_INIT, 1))
|
|
return -ETIMEDOUT;
|
|
|
|
if (netsec_set_mac_reg(priv, GMAC_REG_BMR,
|
|
NETSEC_GMAC_BMR_REG_COMMON))
|
|
return -ETIMEDOUT;
|
|
|
|
if (netsec_set_mac_reg(priv, GMAC_REG_RDLAR,
|
|
NETSEC_GMAC_RDLAR_REG_COMMON))
|
|
return -ETIMEDOUT;
|
|
|
|
if (netsec_set_mac_reg(priv, GMAC_REG_TDLAR,
|
|
NETSEC_GMAC_TDLAR_REG_COMMON))
|
|
return -ETIMEDOUT;
|
|
|
|
if (netsec_set_mac_reg(priv, GMAC_REG_MFFR, 0x80000001))
|
|
return -ETIMEDOUT;
|
|
|
|
ret = netsec_mac_update_to_phy_state(priv);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = netsec_get_mac_reg(priv, GMAC_REG_OMR, &value);
|
|
if (ret)
|
|
return ret;
|
|
|
|
value |= NETSEC_GMAC_OMR_REG_SR;
|
|
value |= NETSEC_GMAC_OMR_REG_ST;
|
|
|
|
netsec_write_reg(priv, NETSEC_REG_NRM_RX_INTEN_CLR, ~0);
|
|
netsec_write_reg(priv, NETSEC_REG_NRM_TX_INTEN_CLR, ~0);
|
|
|
|
if (netsec_set_mac_reg(priv, GMAC_REG_OMR, value))
|
|
return -ETIMEDOUT;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int netsec_stop_gmac(struct netsec_priv *priv)
|
|
{
|
|
u32 value;
|
|
int ret;
|
|
|
|
ret = netsec_get_mac_reg(priv, GMAC_REG_OMR, &value);
|
|
if (ret)
|
|
return ret;
|
|
value &= ~NETSEC_GMAC_OMR_REG_SR;
|
|
value &= ~NETSEC_GMAC_OMR_REG_ST;
|
|
|
|
/* disable all interrupts */
|
|
netsec_write_reg(priv, NETSEC_REG_NRM_RX_INTEN_CLR, ~0);
|
|
netsec_write_reg(priv, NETSEC_REG_NRM_TX_INTEN_CLR, ~0);
|
|
|
|
return netsec_set_mac_reg(priv, GMAC_REG_OMR, value);
|
|
}
|
|
|
|
static void netsec_spi_read(char *buf, loff_t len, loff_t offset)
|
|
{
|
|
struct spi_flash *flash;
|
|
|
|
flash = spi_flash_probe(CONFIG_SF_DEFAULT_BUS, CONFIG_SF_DEFAULT_CS,
|
|
CONFIG_SF_DEFAULT_SPEED, CONFIG_SF_DEFAULT_MODE);
|
|
|
|
spi_flash_read(flash, offset, len, buf);
|
|
}
|
|
|
|
static int netsec_read_rom_hwaddr(struct udevice *dev)
|
|
{
|
|
struct netsec_priv *priv = dev_get_priv(dev);
|
|
struct eth_pdata *pdata = dev_get_plat(dev);
|
|
char macp[NOR_BLOCK];
|
|
|
|
netsec_spi_read(macp, sizeof(macp), priv->eeprom_base);
|
|
|
|
pdata->enetaddr[0] = readb(macp + 3);
|
|
pdata->enetaddr[1] = readb(macp + 2);
|
|
pdata->enetaddr[2] = readb(macp + 1);
|
|
pdata->enetaddr[3] = readb(macp + 0);
|
|
pdata->enetaddr[4] = readb(macp + 7);
|
|
pdata->enetaddr[5] = readb(macp + 6);
|
|
return 0;
|
|
}
|
|
|
|
static int netsec_send(struct udevice *dev, void *packet, int length)
|
|
{
|
|
struct netsec_priv *priv = dev_get_priv(dev);
|
|
u32 val, tout;
|
|
|
|
val = netsec_read_reg(priv, NETSEC_REG_NRM_TX_STATUS);
|
|
netsec_cache_flush((uintptr_t)packet, length);
|
|
netsec_set_tx_de(priv, packet, length);
|
|
netsec_write_reg(priv, NETSEC_REG_NRM_TX_PKTCNT, 1); /* submit another tx */
|
|
|
|
val = netsec_read_reg(priv, NETSEC_REG_NRM_TX_PKTCNT);
|
|
|
|
tout = 10000;
|
|
do {
|
|
val = netsec_read_reg(priv, NETSEC_REG_NRM_TX_DONE_PKTCNT);
|
|
udelay(2);
|
|
} while (--tout && !val);
|
|
|
|
if (!tout) {
|
|
val = netsec_read_reg(priv, NETSEC_REG_NRM_TX_PKTCNT);
|
|
pr_err("%s: ETIMEDOUT: %dpackets\n", __func__, val);
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int netsec_free_packet(struct udevice *dev, uchar *packet, int length)
|
|
{
|
|
struct netsec_priv *priv = dev_get_priv(dev);
|
|
|
|
netsec_set_rx_de(priv, priv->rxat, net_rx_packets[priv->rxat]);
|
|
|
|
priv->rxat++;
|
|
if (priv->rxat == PKTBUFSRX)
|
|
priv->rxat = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int netsec_recv(struct udevice *dev, int flags, uchar **packetp)
|
|
{
|
|
struct netsec_priv *priv = dev_get_priv(dev);
|
|
int idx = priv->rxat;
|
|
uchar *ptr = net_rx_packets[idx];
|
|
struct netsec_de *de = &priv->rxde[idx];
|
|
int length = 0;
|
|
|
|
netsec_cache_invalidate((uintptr_t)de, sizeof(*de));
|
|
|
|
if (de->attr & (1U << NETSEC_RX_PKT_OWN_FIELD))
|
|
return -EAGAIN;
|
|
|
|
length = de->buf_len_info >> 16;
|
|
|
|
/* invalidate after DMA is done */
|
|
netsec_cache_invalidate((uintptr_t)ptr, length);
|
|
*packetp = ptr;
|
|
|
|
return length;
|
|
}
|
|
|
|
static int _netsec_get_phy_reg(struct mii_dev *bus,
|
|
int phy_addr, int devad, int reg_addr)
|
|
{
|
|
return netsec_get_phy_reg(bus->priv, phy_addr, reg_addr);
|
|
}
|
|
|
|
static int _netsec_set_phy_reg(struct mii_dev *bus,
|
|
int phy_addr, int devad, int reg_addr, u16 val)
|
|
{
|
|
return netsec_set_phy_reg(bus->priv, phy_addr, reg_addr, val);
|
|
}
|
|
|
|
static int netsec_mdiobus_init(struct netsec_priv *priv, const char *name)
|
|
{
|
|
struct mii_dev *bus = mdio_alloc();
|
|
|
|
if (!bus)
|
|
return -ENOMEM;
|
|
|
|
bus->read = _netsec_get_phy_reg;
|
|
bus->write = _netsec_set_phy_reg;
|
|
snprintf(bus->name, sizeof(bus->name), "%s", name);
|
|
bus->priv = priv;
|
|
|
|
return mdio_register(bus);
|
|
}
|
|
|
|
static int netsec_phy_init(struct netsec_priv *priv, void *dev)
|
|
{
|
|
struct phy_device *phydev;
|
|
int ret;
|
|
|
|
phydev = phy_connect(priv->bus, priv->phy_addr, dev, priv->phy_mode);
|
|
|
|
phydev->supported &= PHY_GBIT_FEATURES;
|
|
if (priv->max_speed) {
|
|
ret = phy_set_supported(phydev, priv->max_speed);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
phydev->advertising = phydev->supported;
|
|
|
|
priv->phydev = phydev;
|
|
phy_config(phydev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int netsec_netdev_load_ucode_region(struct netsec_priv *priv, u32 reg,
|
|
u32 addr_h, u32 addr_l, u32 size)
|
|
{
|
|
u64 base = ((u64)addr_h << 32 | addr_l) - EERPROM_MAP_OFFSET;
|
|
|
|
while (size > 0) {
|
|
char buf[NOR_BLOCK];
|
|
u32 *ucode = (u32 *)buf;
|
|
u64 off;
|
|
int i;
|
|
|
|
off = base % NOR_BLOCK;
|
|
base -= off;
|
|
netsec_spi_read(buf, sizeof(buf), base);
|
|
|
|
for (i = off / 4; i < sizeof(buf) / 4 && size > 0; i++, size--)
|
|
netsec_write_reg(priv, reg, ucode[i]);
|
|
base += NOR_BLOCK;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int netsec_netdev_load_microcode(struct netsec_priv *priv)
|
|
{
|
|
u32 addr_h, addr_l, size;
|
|
char buf[NOR_BLOCK];
|
|
u32 *ucinfo = (u32 *)buf;
|
|
int err;
|
|
|
|
netsec_spi_read(buf, sizeof(buf), priv->eeprom_base);
|
|
|
|
addr_h = ucinfo[NETSEC_EEPROM_HM_ME_ADDRESS_H >> 2];
|
|
addr_l = ucinfo[NETSEC_EEPROM_HM_ME_ADDRESS_L >> 2];
|
|
size = ucinfo[NETSEC_EEPROM_HM_ME_SIZE >> 2];
|
|
|
|
err = netsec_netdev_load_ucode_region(priv, NETSEC_REG_DMAC_HM_CMD_BUF,
|
|
addr_h, addr_l, size);
|
|
if (err)
|
|
return err;
|
|
|
|
addr_h = ucinfo[NETSEC_EEPROM_MH_ME_ADDRESS_H >> 2];
|
|
addr_l = ucinfo[NETSEC_EEPROM_MH_ME_ADDRESS_L >> 2];
|
|
size = ucinfo[NETSEC_EEPROM_MH_ME_SIZE >> 2];
|
|
|
|
err = netsec_netdev_load_ucode_region(priv, NETSEC_REG_DMAC_MH_CMD_BUF,
|
|
addr_h, addr_l, size);
|
|
if (err)
|
|
return err;
|
|
|
|
addr_h = 0;
|
|
addr_l = ucinfo[NETSEC_EEPROM_PKT_ME_ADDRESS >> 2];
|
|
size = ucinfo[NETSEC_EEPROM_PKT_ME_SIZE >> 2];
|
|
|
|
err = netsec_netdev_load_ucode_region(priv, NETSEC_REG_PKT_CMD_BUF,
|
|
addr_h, addr_l, size);
|
|
if (err)
|
|
return err;
|
|
|
|
return 0;
|
|
}
|
|
|
|
void netsec_pre_init_microengine(struct netsec_priv *priv)
|
|
{
|
|
u32 data;
|
|
|
|
/* Remove dormant settings */
|
|
data = netsec_get_phy_reg(priv, priv->phy_addr, MII_BMCR);
|
|
data &= ~BMCR_PDOWN;
|
|
data |= BMCR_ISOLATE;
|
|
netsec_set_phy_reg(priv, priv->phy_addr, MII_BMCR, data);
|
|
mdelay(100);
|
|
|
|
/* Put phy in loopback mode to guarantee RXCLK input */
|
|
data |= BMCR_LOOPBACK;
|
|
netsec_set_phy_reg(priv, priv->phy_addr, MII_BMCR, data);
|
|
mdelay(100);
|
|
}
|
|
|
|
void netsec_post_init_microengine(struct netsec_priv *priv)
|
|
{
|
|
u32 data;
|
|
|
|
/* Get phy back to normal operation */
|
|
data = netsec_get_phy_reg(priv, priv->phy_addr, MII_BMCR);
|
|
data &= ~BMCR_LOOPBACK;
|
|
netsec_set_phy_reg(priv, priv->phy_addr, MII_BMCR, data);
|
|
mdelay(100);
|
|
|
|
/* Apply software reset */
|
|
data |= BMCR_RESET;
|
|
netsec_set_phy_reg(priv, priv->phy_addr, MII_BMCR, data);
|
|
mdelay(100);
|
|
}
|
|
|
|
static int netsec_reset_hardware(struct netsec_priv *priv, bool load_ucode)
|
|
{
|
|
u32 value;
|
|
int err;
|
|
|
|
netsec_write_reg(priv, NETSEC_REG_CLK_EN, 0x24);
|
|
|
|
/* stop DMA engines */
|
|
if (!netsec_read_reg(priv, NETSEC_REG_ADDR_DIS_CORE)) {
|
|
netsec_write_reg(priv, NETSEC_REG_DMA_HM_CTRL,
|
|
NETSEC_DMA_CTRL_REG_STOP);
|
|
netsec_write_reg(priv, NETSEC_REG_DMA_MH_CTRL,
|
|
NETSEC_DMA_CTRL_REG_STOP);
|
|
|
|
value = 100;
|
|
while (netsec_read_reg(priv, NETSEC_REG_DMA_HM_CTRL) &
|
|
NETSEC_DMA_CTRL_REG_STOP) {
|
|
udelay(1000);
|
|
if (--value == 0) {
|
|
pr_err("%s:%d timeout!\n", __func__, __LINE__);
|
|
break;
|
|
}
|
|
}
|
|
|
|
value = 100;
|
|
while (netsec_read_reg(priv, NETSEC_REG_DMA_MH_CTRL) &
|
|
NETSEC_DMA_CTRL_REG_STOP) {
|
|
udelay(1000);
|
|
if (--value == 0) {
|
|
pr_err("%s:%d timeout!\n", __func__, __LINE__);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
netsec_set_mac_reg(priv, GMAC_REG_BMR, NETSEC_GMAC_BMR_REG_RESET);
|
|
|
|
netsec_write_reg(priv, NETSEC_REG_SOFT_RST, NETSEC_SOFT_RST_REG_RESET);
|
|
netsec_write_reg(priv, NETSEC_REG_SOFT_RST, NETSEC_SOFT_RST_REG_RUN);
|
|
netsec_write_reg(priv, NETSEC_REG_COM_INIT, NETSEC_COM_INIT_REG_ALL);
|
|
|
|
value = 100;
|
|
while (netsec_read_reg(priv, NETSEC_REG_COM_INIT) != 0) {
|
|
udelay(1000);
|
|
if (--value == 0) {
|
|
pr_err("%s:%d COM_INIT timeout!\n", __func__, __LINE__);
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* MAC desc init */
|
|
netsec_write_reg(priv, MAC_REG_DESC_INIT, 1);
|
|
netsec_wait_while_busy(priv, MAC_REG_DESC_INIT, 1);
|
|
/* set MAC_INTF_SEL */
|
|
netsec_write_reg(priv, MAC_REG_INTF_SEL, 1);
|
|
|
|
netsec_write_reg(priv, NETSEC_REG_CLK_EN, 1 << 5);
|
|
|
|
/* set desc_start addr */
|
|
netsec_write_reg(priv, NETSEC_REG_NRM_RX_DESC_START_UP,
|
|
upper_32_bits((dma_addr_t)priv->rxde));
|
|
netsec_write_reg(priv, NETSEC_REG_NRM_RX_DESC_START_LW,
|
|
lower_32_bits((dma_addr_t)priv->rxde));
|
|
|
|
netsec_write_reg(priv, NETSEC_REG_NRM_TX_DESC_START_UP,
|
|
upper_32_bits((dma_addr_t)priv->txde));
|
|
netsec_write_reg(priv, NETSEC_REG_NRM_TX_DESC_START_LW,
|
|
lower_32_bits((dma_addr_t)priv->txde));
|
|
|
|
/* set normal tx dring ring config */
|
|
netsec_write_reg(priv, NETSEC_REG_NRM_TX_CONFIG,
|
|
1 << NETSEC_REG_DESC_ENDIAN);
|
|
netsec_write_reg(priv, NETSEC_REG_NRM_RX_CONFIG,
|
|
1 << NETSEC_REG_DESC_ENDIAN);
|
|
|
|
if (load_ucode) {
|
|
err = netsec_netdev_load_microcode(priv);
|
|
if (err) {
|
|
pr_err("%s: failed to load microcode (%d)\n",
|
|
__func__, err);
|
|
return err;
|
|
}
|
|
}
|
|
|
|
/* set desc_start addr */
|
|
netsec_write_reg(priv, NETSEC_REG_NRM_RX_DESC_START_UP,
|
|
upper_32_bits((dma_addr_t)priv->rxde));
|
|
netsec_write_reg(priv, NETSEC_REG_NRM_RX_DESC_START_LW,
|
|
lower_32_bits((dma_addr_t)priv->rxde));
|
|
|
|
netsec_write_reg(priv, NETSEC_REG_NRM_TX_DESC_START_UP,
|
|
upper_32_bits((dma_addr_t)priv->txde));
|
|
netsec_write_reg(priv, NETSEC_REG_NRM_TX_DESC_START_LW,
|
|
lower_32_bits((dma_addr_t)priv->txde));
|
|
|
|
netsec_write_reg(priv, NETSEC_REG_CLK_EN, 1 << 5);
|
|
|
|
/* start DMA engines */
|
|
netsec_write_reg(priv, NETSEC_REG_DMA_TMR_CTRL, priv->freq / 1000000 - 1);
|
|
|
|
netsec_pre_init_microengine(priv);
|
|
|
|
netsec_write_reg(priv, NETSEC_REG_ADDR_DIS_CORE, 0);
|
|
|
|
mdelay(100);
|
|
|
|
if (!(netsec_read_reg(priv, NETSEC_REG_TOP_STATUS) &
|
|
NETSEC_TOP_IRQ_REG_ME_START)) {
|
|
pr_err("microengine start failed\n");
|
|
return -ENXIO;
|
|
}
|
|
|
|
netsec_post_init_microengine(priv);
|
|
|
|
/* clear microcode load end status */
|
|
netsec_write_reg(priv, NETSEC_REG_TOP_STATUS,
|
|
NETSEC_TOP_IRQ_REG_ME_START);
|
|
|
|
netsec_write_reg(priv, NETSEC_REG_CLK_EN, 1 << 5);
|
|
|
|
value = netsec_read_reg(priv, NETSEC_REG_PKT_CTRL);
|
|
value |= NETSEC_PKT_CTRL_REG_MODE_NRM;
|
|
/* change to normal mode */
|
|
netsec_write_reg(priv, NETSEC_REG_DMA_MH_CTRL, MH_CTRL__MODE_TRANS);
|
|
netsec_write_reg(priv, NETSEC_REG_PKT_CTRL, value);
|
|
|
|
value = 100;
|
|
while ((netsec_read_reg(priv, NETSEC_REG_MODE_TRANS_COMP_STATUS) &
|
|
NETSEC_MODE_TRANS_COMP_IRQ_T2N) == 0) {
|
|
udelay(1000);
|
|
if (--value == 0) {
|
|
value = netsec_read_reg(priv, NETSEC_REG_MODE_TRANS_COMP_STATUS);
|
|
pr_err("%s:%d timeout! val=%x\n", __func__, __LINE__, value);
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* clear any pending EMPTY/ERR irq status */
|
|
netsec_write_reg(priv, NETSEC_REG_NRM_TX_STATUS, ~0);
|
|
|
|
/* Disable TX & RX intr */
|
|
netsec_write_reg(priv, NETSEC_REG_INTEN_CLR, ~0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void netsec_stop(struct udevice *dev)
|
|
{
|
|
struct netsec_priv *priv = dev_get_priv(dev);
|
|
|
|
netsec_write_reg(priv, NETSEC_REG_ADDR_DIS_CORE, 7);
|
|
netsec_stop_gmac(priv);
|
|
phy_shutdown(priv->phydev);
|
|
netsec_reset_hardware(priv, false);
|
|
}
|
|
|
|
static int netsec_start(struct udevice *dev)
|
|
{
|
|
struct netsec_priv *priv = dev_get_priv(dev);
|
|
int i;
|
|
|
|
phy_startup(priv->phydev);
|
|
netsec_start_gmac(priv);
|
|
|
|
priv->rxat = 0;
|
|
for (i = 0; i < PKTBUFSRX; i++)
|
|
netsec_set_rx_de(priv, i, net_rx_packets[i]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int netsec_of_to_plat(struct udevice *dev)
|
|
{
|
|
struct eth_pdata *pdata = dev_get_plat(dev);
|
|
struct netsec_priv *priv = dev_get_priv(dev);
|
|
struct ofnode_phandle_args phandle_args;
|
|
|
|
pdata->iobase = dev_read_addr_index(dev, 0);
|
|
priv->eeprom_base = dev_read_addr_index(dev, 1) - EERPROM_MAP_OFFSET;
|
|
|
|
pdata->phy_interface = dev_read_phy_mode(dev);
|
|
if (pdata->phy_interface == PHY_INTERFACE_MODE_NA)
|
|
return -EINVAL;
|
|
|
|
if (!dev_read_phandle_with_args(dev, "phy-handle", NULL, 0, 0,
|
|
&phandle_args))
|
|
priv->phy_addr = ofnode_read_u32_default(phandle_args.node, "reg", 7);
|
|
else
|
|
priv->phy_addr = 7;
|
|
|
|
pdata->max_speed = dev_read_u32_default(dev, "max-speed", SPEED_1000);
|
|
|
|
priv->ioaddr = pdata->iobase;
|
|
priv->phy_mode = pdata->phy_interface;
|
|
priv->max_speed = pdata->max_speed;
|
|
priv->freq = 250000000UL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int netsec_probe(struct udevice *dev)
|
|
{
|
|
struct netsec_priv *priv = dev_get_priv(dev);
|
|
int ret;
|
|
|
|
netsec_reset_hardware(priv, true);
|
|
|
|
ret = netsec_mdiobus_init(priv, dev->name);
|
|
if (ret) {
|
|
pr_err("Failed to initialize mdiobus: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
priv->bus = miiphy_get_dev_by_name(dev->name);
|
|
|
|
ret = netsec_phy_init(priv, dev);
|
|
if (ret) {
|
|
pr_err("Failed to initialize phy: %d\n", ret);
|
|
goto out_mdiobus_release;
|
|
}
|
|
|
|
return 0;
|
|
out_mdiobus_release:
|
|
mdio_unregister(priv->bus);
|
|
mdio_free(priv->bus);
|
|
return ret;
|
|
}
|
|
|
|
static int netsec_remove(struct udevice *dev)
|
|
{
|
|
struct netsec_priv *priv = dev_get_priv(dev);
|
|
|
|
free(priv->phydev);
|
|
mdio_unregister(priv->bus);
|
|
mdio_free(priv->bus);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct eth_ops netsec_ops = {
|
|
.start = netsec_start,
|
|
.stop = netsec_stop,
|
|
.send = netsec_send,
|
|
.recv = netsec_recv,
|
|
.free_pkt = netsec_free_packet,
|
|
.read_rom_hwaddr = netsec_read_rom_hwaddr,
|
|
};
|
|
|
|
static const struct udevice_id netsec_ids[] = {
|
|
{
|
|
.compatible = "socionext,synquacer-netsec",
|
|
},
|
|
{}
|
|
};
|
|
|
|
U_BOOT_DRIVER(ave) = {
|
|
.name = "synquacer_netsec",
|
|
.id = UCLASS_ETH,
|
|
.of_match = netsec_ids,
|
|
.probe = netsec_probe,
|
|
.remove = netsec_remove,
|
|
.of_to_plat = netsec_of_to_plat,
|
|
.ops = &netsec_ops,
|
|
.priv_auto = sizeof(struct netsec_priv),
|
|
.plat_auto = sizeof(struct eth_pdata),
|
|
};
|