mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-11 15:37:23 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
213 lines
4.4 KiB
Text
213 lines
4.4 KiB
Text
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Google Veyron Jerry Rev 3+ board device tree source
|
|
*
|
|
* Copyright 2014 Google, Inc
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include "rk3288-veyron-chromebook.dtsi"
|
|
#include "cros-ec-sbs.dtsi"
|
|
|
|
/ {
|
|
model = "Google Jerry";
|
|
compatible = "google,veyron-jerry-rev7", "google,veyron-jerry-rev6",
|
|
"google,veyron-jerry-rev5", "google,veyron-jerry-rev4",
|
|
"google,veyron-jerry-rev3", "google,veyron-jerry",
|
|
"google,veyron", "rockchip,rk3288";
|
|
|
|
chosen {
|
|
stdout-path = &uart2;
|
|
};
|
|
|
|
panel_regulator: panel-regulator {
|
|
compatible = "regulator-fixed";
|
|
enable-active-high;
|
|
gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&lcd_enable_h>;
|
|
regulator-name = "panel_regulator";
|
|
vin-supply = <&vcc33_sys>;
|
|
};
|
|
|
|
vcc18_lcd: vcc18-lcd {
|
|
compatible = "regulator-fixed";
|
|
enable-active-high;
|
|
gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&avdd_1v8_disp_en>;
|
|
regulator-name = "vcc18_lcd";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
vin-supply = <&vcc18_wl>;
|
|
};
|
|
|
|
backlight_regulator: backlight-regulator {
|
|
compatible = "regulator-fixed";
|
|
enable-active-high;
|
|
gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&bl_pwr_en>;
|
|
regulator-name = "backlight_regulator";
|
|
vin-supply = <&vcc33_sys>;
|
|
startup-delay-us = <15000>;
|
|
};
|
|
};
|
|
|
|
&dmc {
|
|
rockchip,pctl-timing = <0x29a 0xc8 0x1f4 0x42 0x4e 0x4 0xea 0xa
|
|
0x5 0x0 0xa 0x7 0x19 0x24 0xa 0x7
|
|
0x5 0xa 0x5 0x200 0x5 0x10 0x40 0x0
|
|
0x1 0x7 0x7 0x4 0xc 0x43 0x100 0x0
|
|
0x5 0x0>;
|
|
rockchip,phy-timing = <0x48f9aab4 0xea0910 0x1002c200
|
|
0xa60 0x40 0x10 0x0>;
|
|
rockchip,sdram-params = <0x30B25564 0x627 3 666000000 3 9 1>;
|
|
};
|
|
|
|
&gpio_keys {
|
|
power {
|
|
gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
&backlight {
|
|
power-supply = <&backlight_regulator>;
|
|
};
|
|
|
|
&panel {
|
|
power-supply= <&panel_regulator>;
|
|
};
|
|
|
|
&rk808 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>;
|
|
dvs-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>,
|
|
<&gpio7 15 GPIO_ACTIVE_HIGH>;
|
|
|
|
regulators {
|
|
mic_vcc: LDO_REG2 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "mic_vcc";
|
|
regulator-suspend-mem-disabled;
|
|
};
|
|
};
|
|
};
|
|
|
|
&sdmmc {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio
|
|
&sdmmc_bus4>;
|
|
disable-wp;
|
|
};
|
|
|
|
&vcc_5v {
|
|
enable-active-high;
|
|
gpio = <&gpio7 21 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&drv_5v>;
|
|
};
|
|
|
|
&vcc50_hdmi {
|
|
enable-active-high;
|
|
gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&vcc50_hdmi_en>;
|
|
};
|
|
|
|
&edp {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&edp_hpd>;
|
|
};
|
|
|
|
&pinctrl {
|
|
backlight {
|
|
bl_pwr_en: bl_pwr_en {
|
|
rockchip,pins = <2 12 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
buck-5v {
|
|
drv_5v: drv-5v {
|
|
rockchip,pins = <7 21 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
edp {
|
|
edp_hpd: edp_hpd {
|
|
rockchip,pins = <7 11 RK_FUNC_2 &pcfg_pull_down>;
|
|
};
|
|
};
|
|
|
|
emmc {
|
|
/* Make sure eMMC is not in reset */
|
|
emmc_deassert_reset: emmc-deassert-reset {
|
|
rockchip,pins = <2 9 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
hdmi {
|
|
vcc50_hdmi_en: vcc50-hdmi-en {
|
|
rockchip,pins = <5 19 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
lcd {
|
|
lcd_enable_h: lcd-en {
|
|
rockchip,pins = <7 14 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
avdd_1v8_disp_en: avdd-1v8-disp-en {
|
|
rockchip,pins = <2 13 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
pmic {
|
|
dvs_1: dvs-1 {
|
|
rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_down>;
|
|
};
|
|
|
|
dvs_2: dvs-2 {
|
|
rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c4 {
|
|
status = "okay";
|
|
|
|
/*
|
|
* Trackpad pin control is shared between Elan and Synaptics devices
|
|
* so we have to pull it up to the bus level.
|
|
*/
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c4_xfer &trackpad_int>;
|
|
|
|
trackpad@15 {
|
|
compatible = "elan,i2c_touchpad";
|
|
interrupt-parent = <&gpio7>;
|
|
interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
|
|
/*
|
|
* Remove the inherited pinctrl settings to avoid clashing
|
|
* with bus-wide ones.
|
|
*/
|
|
/delete-property/pinctrl-names;
|
|
/delete-property/pinctrl-0;
|
|
reg = <0x15>;
|
|
vcc-supply = <&vcc33_io>;
|
|
wakeup-source;
|
|
};
|
|
|
|
trackpad@2c {
|
|
compatible = "hid-over-i2c";
|
|
interrupt-parent = <&gpio7>;
|
|
interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
|
|
reg = <0x2c>;
|
|
hid-descr-addr = <0x0020>;
|
|
vcc-supply = <&vcc33_io>;
|
|
wakeup-source;
|
|
};
|
|
};
|