u-boot/arch/arm/dts/meson-gxbb.dtsi
Neil Armstrong 5b3da7fa12 ARM64: meson: Sync DT with Linux 4.17
Synchronize the Linux Device Tree for Amlogic Meson GX boards from Linux 4.17.0

This will enable USB on Amlogic Meson GXL Boards like Khadas VIM, P212 or
LibreTech-CC.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-06-13 07:49:11 -04:00

774 lines
15 KiB
Text

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2016 Andreas Färber
*/
#include "meson-gx.dtsi"
#include <dt-bindings/gpio/meson-gxbb-gpio.h>
#include <dt-bindings/reset/amlogic,meson-gxbb-reset.h>
#include <dt-bindings/clock/gxbb-clkc.h>
#include <dt-bindings/clock/gxbb-aoclkc.h>
#include <dt-bindings/reset/gxbb-aoclkc.h>
/ {
compatible = "amlogic,meson-gxbb";
soc {
usb0_phy: phy@c0000000 {
compatible = "amlogic,meson-gxbb-usb2-phy";
#phy-cells = <0>;
reg = <0x0 0xc0000000 0x0 0x20>;
resets = <&reset RESET_USB_OTG>;
clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>;
clock-names = "usb_general", "usb";
status = "disabled";
};
usb1_phy: phy@c0000020 {
compatible = "amlogic,meson-gxbb-usb2-phy";
#phy-cells = <0>;
reg = <0x0 0xc0000020 0x0 0x20>;
resets = <&reset RESET_USB_OTG>;
clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1>;
clock-names = "usb_general", "usb";
status = "disabled";
};
usb0: usb@c9000000 {
compatible = "amlogic,meson-gxbb-usb", "snps,dwc2";
reg = <0x0 0xc9000000 0x0 0x40000>;
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clkc CLKID_USB0_DDR_BRIDGE>;
clock-names = "otg";
phys = <&usb0_phy>;
phy-names = "usb2-phy";
dr_mode = "host";
status = "disabled";
};
usb1: usb@c9100000 {
compatible = "amlogic,meson-gxbb-usb", "snps,dwc2";
reg = <0x0 0xc9100000 0x0 0x40000>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
clock-names = "otg";
phys = <&usb1_phy>;
phy-names = "usb2-phy";
dr_mode = "host";
status = "disabled";
};
};
};
&aobus {
pinctrl_aobus: pinctrl@14 {
compatible = "amlogic,meson-gxbb-aobus-pinctrl";
#address-cells = <2>;
#size-cells = <2>;
ranges;
gpio_ao: bank@14 {
reg = <0x0 0x00014 0x0 0x8>,
<0x0 0x0002c 0x0 0x4>,
<0x0 0x00024 0x0 0x8>;
reg-names = "mux", "pull", "gpio";
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pinctrl_aobus 0 0 14>;
};
uart_ao_a_pins: uart_ao_a {
mux {
groups = "uart_tx_ao_a", "uart_rx_ao_a";
function = "uart_ao";
};
};
uart_ao_a_cts_rts_pins: uart_ao_a_cts_rts {
mux {
groups = "uart_cts_ao_a",
"uart_rts_ao_a";
function = "uart_ao";
};
};
uart_ao_b_pins: uart_ao_b {
mux {
groups = "uart_tx_ao_b", "uart_rx_ao_b";
function = "uart_ao_b";
};
};
uart_ao_b_cts_rts_pins: uart_ao_b_cts_rts {
mux {
groups = "uart_cts_ao_b",
"uart_rts_ao_b";
function = "uart_ao_b";
};
};
remote_input_ao_pins: remote_input_ao {
mux {
groups = "remote_input_ao";
function = "remote_input_ao";
};
};
i2c_ao_pins: i2c_ao {
mux {
groups = "i2c_sck_ao",
"i2c_sda_ao";
function = "i2c_ao";
};
};
pwm_ao_a_3_pins: pwm_ao_a_3 {
mux {
groups = "pwm_ao_a_3";
function = "pwm_ao_a_3";
};
};
pwm_ao_a_6_pins: pwm_ao_a_6 {
mux {
groups = "pwm_ao_a_6";
function = "pwm_ao_a_6";
};
};
pwm_ao_a_12_pins: pwm_ao_a_12 {
mux {
groups = "pwm_ao_a_12";
function = "pwm_ao_a_12";
};
};
pwm_ao_b_pins: pwm_ao_b {
mux {
groups = "pwm_ao_b";
function = "pwm_ao_b";
};
};
i2s_am_clk_pins: i2s_am_clk {
mux {
groups = "i2s_am_clk";
function = "i2s_out_ao";
};
};
i2s_out_ao_clk_pins: i2s_out_ao_clk {
mux {
groups = "i2s_out_ao_clk";
function = "i2s_out_ao";
};
};
i2s_out_lr_clk_pins: i2s_out_lr_clk {
mux {
groups = "i2s_out_lr_clk";
function = "i2s_out_ao";
};
};
i2s_out_ch01_ao_pins: i2s_out_ch01_ao {
mux {
groups = "i2s_out_ch01_ao";
function = "i2s_out_ao";
};
};
i2s_out_ch23_ao_pins: i2s_out_ch23_ao {
mux {
groups = "i2s_out_ch23_ao";
function = "i2s_out_ao";
};
};
i2s_out_ch45_ao_pins: i2s_out_ch45_ao {
mux {
groups = "i2s_out_ch45_ao";
function = "i2s_out_ao";
};
};
spdif_out_ao_6_pins: spdif_out_ao_6 {
mux {
groups = "spdif_out_ao_6";
function = "spdif_out_ao";
};
};
spdif_out_ao_13_pins: spdif_out_ao_13 {
mux {
groups = "spdif_out_ao_13";
function = "spdif_out_ao";
};
};
ao_cec_pins: ao_cec {
mux {
groups = "ao_cec";
function = "cec_ao";
};
};
ee_cec_pins: ee_cec {
mux {
groups = "ee_cec";
function = "cec_ao";
};
};
};
};
&apb {
mali: gpu@c0000 {
compatible = "amlogic,meson-gxbb-mali", "arm,mali-450";
reg = <0x0 0xc0000 0x0 0x40000>;
interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "gp", "gpmmu", "pp", "pmu",
"pp0", "ppmmu0", "pp1", "ppmmu1",
"pp2", "ppmmu2";
clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
clock-names = "bus", "core";
/*
* Mali clocking is provided by two identical clock paths
* MALI_0 and MALI_1 muxed to a single clock by a glitch
* free mux to safely change frequency while running.
*/
assigned-clocks = <&clkc CLKID_GP0_PLL>,
<&clkc CLKID_MALI_0_SEL>,
<&clkc CLKID_MALI_0>,
<&clkc CLKID_MALI>; /* Glitch free mux */
assigned-clock-parents = <0>, /* Do Nothing */
<&clkc CLKID_GP0_PLL>,
<0>, /* Do Nothing */
<&clkc CLKID_MALI_0>;
assigned-clock-rates = <744000000>,
<0>, /* Do Nothing */
<744000000>,
<0>; /* Do Nothing */
};
};
&cbus {
spifc: spi@8c80 {
compatible = "amlogic,meson-gxbb-spifc";
reg = <0x0 0x08c80 0x0 0x80>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clkc CLKID_SPI>;
status = "disabled";
};
};
&cec_AO {
clocks = <&clkc_AO CLKID_AO_CEC_32K>;
clock-names = "core";
};
&clkc_AO {
compatible = "amlogic,meson-gxbb-aoclkc", "amlogic,meson-gx-aoclkc";
};
&ethmac {
clocks = <&clkc CLKID_ETH>,
<&clkc CLKID_FCLK_DIV2>,
<&clkc CLKID_MPLL2>;
clock-names = "stmmaceth", "clkin0", "clkin1";
};
&gpio_intc {
compatible = "amlogic,meson-gpio-intc",
"amlogic,meson-gxbb-gpio-intc";
status = "okay";
};
&hdmi_tx {
compatible = "amlogic,meson-gxbb-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
resets = <&reset RESET_HDMITX_CAPB3>,
<&reset RESET_HDMI_SYSTEM_RESET>,
<&reset RESET_HDMI_TX>;
reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
clocks = <&clkc CLKID_HDMI_PCLK>,
<&clkc CLKID_CLK81>,
<&clkc CLKID_GCLK_VENCI_INT0>;
clock-names = "isfr", "iahb", "venci";
};
&hiubus {
clkc: clock-controller@0 {
compatible = "amlogic,gxbb-clkc";
#clock-cells = <1>;
reg = <0x0 0x0 0x0 0x3db>;
};
};
&hwrng {
clocks = <&clkc CLKID_RNG0>;
clock-names = "core";
};
&i2c_A {
clocks = <&clkc CLKID_I2C>;
};
&i2c_AO {
clocks = <&clkc CLKID_AO_I2C>;
};
&i2c_B {
clocks = <&clkc CLKID_I2C>;
};
&i2c_C {
clocks = <&clkc CLKID_I2C>;
};
&periphs {
pinctrl_periphs: pinctrl@4b0 {
compatible = "amlogic,meson-gxbb-periphs-pinctrl";
#address-cells = <2>;
#size-cells = <2>;
ranges;
gpio: bank@4b0 {
reg = <0x0 0x004b0 0x0 0x28>,
<0x0 0x004e8 0x0 0x14>,
<0x0 0x00520 0x0 0x14>,
<0x0 0x00430 0x0 0x40>;
reg-names = "mux", "pull", "pull-enable", "gpio";
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pinctrl_periphs 0 0 119>;
};
emmc_pins: emmc {
mux {
groups = "emmc_nand_d07",
"emmc_cmd",
"emmc_clk";
function = "emmc";
};
};
emmc_ds_pins: emmc-ds {
mux {
groups = "emmc_ds";
function = "emmc";
};
};
emmc_clk_gate_pins: emmc_clk_gate {
mux {
groups = "BOOT_8";
function = "gpio_periphs";
};
cfg-pull-down {
pins = "BOOT_8";
bias-pull-down;
};
};
nor_pins: nor {
mux {
groups = "nor_d",
"nor_q",
"nor_c",
"nor_cs";
function = "nor";
};
};
spi_pins: spi {
mux {
groups = "spi_miso",
"spi_mosi",
"spi_sclk";
function = "spi";
};
};
spi_ss0_pins: spi-ss0 {
mux {
groups = "spi_ss0";
function = "spi";
};
};
sdcard_pins: sdcard {
mux {
groups = "sdcard_d0",
"sdcard_d1",
"sdcard_d2",
"sdcard_d3",
"sdcard_cmd",
"sdcard_clk";
function = "sdcard";
};
};
sdcard_clk_gate_pins: sdcard_clk_gate {
mux {
groups = "CARD_2";
function = "gpio_periphs";
};
cfg-pull-down {
pins = "CARD_2";
bias-pull-down;
};
};
sdio_pins: sdio {
mux {
groups = "sdio_d0",
"sdio_d1",
"sdio_d2",
"sdio_d3",
"sdio_cmd",
"sdio_clk";
function = "sdio";
};
};
sdio_clk_gate_pins: sdio_clk_gate {
mux {
groups = "GPIOX_4";
function = "gpio_periphs";
};
cfg-pull-down {
pins = "GPIOX_4";
bias-pull-down;
};
};
sdio_irq_pins: sdio_irq {
mux {
groups = "sdio_irq";
function = "sdio";
};
};
uart_a_pins: uart_a {
mux {
groups = "uart_tx_a",
"uart_rx_a";
function = "uart_a";
};
};
uart_a_cts_rts_pins: uart_a_cts_rts {
mux {
groups = "uart_cts_a",
"uart_rts_a";
function = "uart_a";
};
};
uart_b_pins: uart_b {
mux {
groups = "uart_tx_b",
"uart_rx_b";
function = "uart_b";
};
};
uart_b_cts_rts_pins: uart_b_cts_rts {
mux {
groups = "uart_cts_b",
"uart_rts_b";
function = "uart_b";
};
};
uart_c_pins: uart_c {
mux {
groups = "uart_tx_c",
"uart_rx_c";
function = "uart_c";
};
};
uart_c_cts_rts_pins: uart_c_cts_rts {
mux {
groups = "uart_cts_c",
"uart_rts_c";
function = "uart_c";
};
};
i2c_a_pins: i2c_a {
mux {
groups = "i2c_sck_a",
"i2c_sda_a";
function = "i2c_a";
};
};
i2c_b_pins: i2c_b {
mux {
groups = "i2c_sck_b",
"i2c_sda_b";
function = "i2c_b";
};
};
i2c_c_pins: i2c_c {
mux {
groups = "i2c_sck_c",
"i2c_sda_c";
function = "i2c_c";
};
};
eth_rgmii_pins: eth-rgmii {
mux {
groups = "eth_mdio",
"eth_mdc",
"eth_clk_rx_clk",
"eth_rx_dv",
"eth_rxd0",
"eth_rxd1",
"eth_rxd2",
"eth_rxd3",
"eth_rgmii_tx_clk",
"eth_tx_en",
"eth_txd0",
"eth_txd1",
"eth_txd2",
"eth_txd3";
function = "eth";
};
};
eth_rmii_pins: eth-rmii {
mux {
groups = "eth_mdio",
"eth_mdc",
"eth_clk_rx_clk",
"eth_rx_dv",
"eth_rxd0",
"eth_rxd1",
"eth_tx_en",
"eth_txd0",
"eth_txd1";
function = "eth";
};
};
pwm_a_x_pins: pwm_a_x {
mux {
groups = "pwm_a_x";
function = "pwm_a_x";
};
};
pwm_a_y_pins: pwm_a_y {
mux {
groups = "pwm_a_y";
function = "pwm_a_y";
};
};
pwm_b_pins: pwm_b {
mux {
groups = "pwm_b";
function = "pwm_b";
};
};
pwm_d_pins: pwm_d {
mux {
groups = "pwm_d";
function = "pwm_d";
};
};
pwm_e_pins: pwm_e {
mux {
groups = "pwm_e";
function = "pwm_e";
};
};
pwm_f_x_pins: pwm_f_x {
mux {
groups = "pwm_f_x";
function = "pwm_f_x";
};
};
pwm_f_y_pins: pwm_f_y {
mux {
groups = "pwm_f_y";
function = "pwm_f_y";
};
};
hdmi_hpd_pins: hdmi_hpd {
mux {
groups = "hdmi_hpd";
function = "hdmi_hpd";
};
};
hdmi_i2c_pins: hdmi_i2c {
mux {
groups = "hdmi_sda", "hdmi_scl";
function = "hdmi_i2c";
};
};
i2sout_ch23_y_pins: i2sout_ch23_y {
mux {
groups = "i2sout_ch23_y";
function = "i2s_out";
};
};
i2sout_ch45_y_pins: i2sout_ch45_y {
mux {
groups = "i2sout_ch45_y";
function = "i2s_out";
};
};
i2sout_ch67_y_pins: i2sout_ch67_y {
mux {
groups = "i2sout_ch67_y";
function = "i2s_out";
};
};
spdif_out_y_pins: spdif_out_y {
mux {
groups = "spdif_out_y";
function = "spdif_out";
};
};
};
};
&pwrc_vpu {
resets = <&reset RESET_VIU>,
<&reset RESET_VENC>,
<&reset RESET_VCBUS>,
<&reset RESET_BT656>,
<&reset RESET_DVIN_RESET>,
<&reset RESET_RDMA>,
<&reset RESET_VENCI>,
<&reset RESET_VENCP>,
<&reset RESET_VDAC>,
<&reset RESET_VDI6>,
<&reset RESET_VENCL>,
<&reset RESET_VID_LOCK>;
clocks = <&clkc CLKID_VPU>,
<&clkc CLKID_VAPB>;
clock-names = "vpu", "vapb";
/*
* VPU clocking is provided by two identical clock paths
* VPU_0 and VPU_1 muxed to a single clock by a glitch
* free mux to safely change frequency while running.
* Same for VAPB but with a final gate after the glitch free mux.
*/
assigned-clocks = <&clkc CLKID_VPU_0_SEL>,
<&clkc CLKID_VPU_0>,
<&clkc CLKID_VPU>, /* Glitch free mux */
<&clkc CLKID_VAPB_0_SEL>,
<&clkc CLKID_VAPB_0>,
<&clkc CLKID_VAPB_SEL>; /* Glitch free mux */
assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>,
<0>, /* Do Nothing */
<&clkc CLKID_VPU_0>,
<&clkc CLKID_FCLK_DIV4>,
<0>, /* Do Nothing */
<&clkc CLKID_VAPB_0>;
assigned-clock-rates = <0>, /* Do Nothing */
<666666666>,
<0>, /* Do Nothing */
<0>, /* Do Nothing */
<250000000>,
<0>; /* Do Nothing */
};
&saradc {
compatible = "amlogic,meson-gxbb-saradc", "amlogic,meson-saradc";
clocks = <&xtal>,
<&clkc CLKID_SAR_ADC>,
<&clkc CLKID_SAR_ADC_CLK>,
<&clkc CLKID_SAR_ADC_SEL>;
clock-names = "clkin", "core", "adc_clk", "adc_sel";
};
&sd_emmc_a {
clocks = <&clkc CLKID_SD_EMMC_A>,
<&clkc CLKID_SD_EMMC_A_CLK0>,
<&clkc CLKID_FCLK_DIV2>;
clock-names = "core", "clkin0", "clkin1";
};
&sd_emmc_b {
clocks = <&clkc CLKID_SD_EMMC_B>,
<&clkc CLKID_SD_EMMC_B_CLK0>,
<&clkc CLKID_FCLK_DIV2>;
clock-names = "core", "clkin0", "clkin1";
};
&sd_emmc_c {
clocks = <&clkc CLKID_SD_EMMC_C>,
<&clkc CLKID_SD_EMMC_C_CLK0>,
<&clkc CLKID_FCLK_DIV2>;
clock-names = "core", "clkin0", "clkin1";
};
&spicc {
clocks = <&clkc CLKID_SPICC>;
clock-names = "core";
resets = <&reset RESET_PERIPHS_SPICC>;
num-cs = <1>;
};
&spifc {
clocks = <&clkc CLKID_SPI>;
};
&uart_A {
clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>;
clock-names = "xtal", "pclk", "baud";
};
&uart_AO {
clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>;
clock-names = "xtal", "pclk", "baud";
};
&uart_AO_B {
clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>;
clock-names = "xtal", "pclk", "baud";
};
&uart_B {
clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>;
clock-names = "xtal", "pclk", "baud";
};
&uart_C {
clocks = <&xtal>, <&clkc CLKID_UART2>, <&xtal>;
clock-names = "xtal", "pclk", "baud";
};
&vpu {
compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu";
power-domains = <&pwrc_vpu>;
};