mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-19 03:08:31 +00:00
c39f44dc6f
Move fsl_ddr_get_spd into common mpc8xxx/ddr/main.c as most boards pretty much do the same thing. The only variations are in how many controllers or DIMMs per controller exist. To make this work we standardize on the names of the SPD_EEPROM_ADDRESS defines based on the use case of the board. We allow boards to override get_spd to either do board specific fixups to the SPD data or deal with any unique behavior of how the SPD eeproms are wired up. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
83 lines
2.3 KiB
C
83 lines
2.3 KiB
C
/*
|
|
* Copyright 2010 Freescale Semiconductor, Inc.
|
|
* Authors: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
|
|
* Timur Tabi <timur@freescale.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the Free
|
|
* Software Foundation; either version 2 of the License, or (at your option)
|
|
* any later version.
|
|
*/
|
|
|
|
#include <common.h>
|
|
|
|
#include <asm/fsl_ddr_sdram.h>
|
|
#include <asm/fsl_ddr_dimm_params.h>
|
|
|
|
typedef struct {
|
|
u32 datarate_mhz_low;
|
|
u32 datarate_mhz_high;
|
|
u32 n_ranks;
|
|
u32 clk_adjust; /* Range: 0-8 */
|
|
u32 cpo; /* Range: 2-31 */
|
|
u32 write_data_delay; /* Range: 0-6 */
|
|
u32 force_2T;
|
|
} board_specific_parameters_t;
|
|
|
|
static const board_specific_parameters_t bsp[] = {
|
|
/*
|
|
* lo| hi| num| clk| cpo|wrdata|2T
|
|
* mhz| mhz|ranks|adjst| | delay|
|
|
*/
|
|
{ 0, 333, 1, 5, 31, 3, 0},
|
|
{334, 400, 1, 5, 31, 3, 0},
|
|
{401, 549, 1, 5, 31, 3, 0},
|
|
{550, 680, 1, 5, 31, 5, 0},
|
|
{681, 850, 1, 5, 31, 5, 0},
|
|
{ 0, 333, 2, 5, 31, 3, 0},
|
|
{334, 400, 2, 5, 31, 3, 0},
|
|
{401, 549, 2, 5, 31, 3, 0},
|
|
{550, 680, 2, 5, 31, 5, 0},
|
|
{681, 850, 2, 5, 31, 5, 0},
|
|
};
|
|
|
|
void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm,
|
|
unsigned int ctrl_num)
|
|
{
|
|
unsigned long ddr_freq;
|
|
unsigned int i;
|
|
|
|
/* set odt_rd_cfg and odt_wr_cfg. */
|
|
for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
|
|
popts->cs_local_opts[i].odt_rd_cfg = 0;
|
|
popts->cs_local_opts[i].odt_wr_cfg = 1;
|
|
}
|
|
|
|
/*
|
|
* Get clk_adjust, cpo, write_data_delay,2T, according to the board ddr
|
|
* freqency and n_banks specified in board_specific_parameters table.
|
|
*/
|
|
ddr_freq = get_ddr_freq(0) / 1000000;
|
|
for (i = 0; i < ARRAY_SIZE(bsp); i++) {
|
|
if (ddr_freq >= bsp[i].datarate_mhz_low &&
|
|
ddr_freq <= bsp[i].datarate_mhz_high &&
|
|
pdimm->n_ranks == bsp[i].n_ranks) {
|
|
popts->clk_adjust = bsp[i].clk_adjust;
|
|
popts->cpo_override = bsp[i].cpo;
|
|
popts->write_data_delay = bsp[i].write_data_delay;
|
|
popts->twoT_en = bsp[i].force_2T;
|
|
break;
|
|
}
|
|
}
|
|
|
|
popts->half_strength_driver_enable = 1;
|
|
|
|
/* Per AN4039, enable ZQ calibration. */
|
|
popts->zq_en = 1;
|
|
|
|
/*
|
|
* For wake-up on ARP, we need auto self refresh enabled
|
|
*/
|
|
popts->auto_self_refresh_en = 1;
|
|
popts->sr_it = 0xb;
|
|
}
|