u-boot/board/freescale/mpc8641hpcn/ddr.c
Kumar Gala c39f44dc6f powerpc/8xxx: Refactor fsl_ddr_get_spd into common code from board
Move fsl_ddr_get_spd into common mpc8xxx/ddr/main.c as most boards
pretty much do the same thing.  The only variations are in how many
controllers or DIMMs per controller exist.  To make this work we
standardize on the names of the SPD_EEPROM_ADDRESS defines based on the
use case of the board.

We allow boards to override get_spd to either do board specific fixups
to the SPD data or deal with any unique behavior of how the SPD eeproms
are wired up.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-04-04 09:24:41 -05:00

132 lines
3.7 KiB
C

/*
* Copyright 2008 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* Version 2 as published by the Free Software Foundation.
*/
#include <common.h>
#include <asm/fsl_ddr_sdram.h>
#include <asm/fsl_ddr_dimm_params.h>
typedef struct {
u32 datarate_mhz_low;
u32 datarate_mhz_high;
u32 n_ranks;
u32 clk_adjust;
u32 cpo;
u32 write_data_delay;
} board_specific_parameters_t;
/* XXX: these values need to be checked for all interleaving modes. */
const board_specific_parameters_t board_specific_parameters[2][16] = {
{
/* memory controller 0 */
/* lo| hi| num| clk| cpo|wrdata */
/* mhz| mhz|ranks|adjst| | delay */
{ 0, 333, 4, 7, 7, 3},
{334, 400, 4, 7, 9, 3},
{401, 549, 4, 7, 9, 3},
{550, 650, 4, 7, 10, 4},
{ 0, 333, 3, 7, 7, 3},
{334, 400, 3, 7, 9, 3},
{401, 549, 3, 7, 9, 3},
{550, 650, 3, 7, 10, 4},
{ 0, 333, 2, 7, 7, 3},
{334, 400, 2, 7, 9, 3},
{401, 549, 2, 7, 9, 3},
{550, 650, 2, 7, 10, 4},
{ 0, 333, 1, 7, 7, 3},
{334, 400, 1, 7, 9, 3},
{401, 549, 1, 7, 9, 3},
{550, 650, 1, 7, 10, 4}
},
{
/* memory controller 1 */
/* lo| hi| num| clk| cpo|wrdata */
/* mhz| mhz|ranks|adjst| | delay */
{ 0, 333, 4, 7, 7, 3},
{334, 400, 4, 7, 9, 3},
{401, 549, 4, 7, 9, 3},
{550, 650, 4, 7, 10, 4},
{ 0, 333, 3, 7, 7, 3},
{334, 400, 3, 7, 9, 3},
{401, 549, 3, 7, 9, 3},
{550, 650, 3, 7, 10, 4},
{ 0, 333, 2, 7, 7, 3},
{334, 400, 2, 7, 9, 3},
{401, 549, 2, 7, 9, 3},
{550, 650, 2, 7, 10, 4},
{ 0, 333, 1, 7, 7, 3},
{334, 400, 1, 7, 9, 3},
{401, 549, 1, 7, 9, 3},
{550, 650, 1, 7, 10, 4}
}
};
void fsl_ddr_board_options(memctl_options_t *popts,
dimm_params_t *pdimm,
unsigned int ctrl_num)
{
const board_specific_parameters_t *pbsp =
&(board_specific_parameters[ctrl_num][0]);
u32 num_params = sizeof(board_specific_parameters[ctrl_num]) /
sizeof(board_specific_parameters[0][0]);
u32 i;
u32 j;
ulong ddr_freq;
/* set odt_rd_cfg and odt_wr_cfg. If the there is only one dimm in
* that controller, set odt_wr_cfg to 4 for CS0, and 0 to CS1. If
* there are two dimms in the controller, set odt_rd_cfg to 3 and
* odt_wr_cfg to 3 for the even CS, 0 for the odd CS.
*/
for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
if (i&1) { /* odd CS */
popts->cs_local_opts[i].odt_rd_cfg = 0;
popts->cs_local_opts[i].odt_wr_cfg = 0;
} else { /* even CS */
if ((CONFIG_DIMM_SLOTS_PER_CTLR == 2) &&
(pdimm[i/2].n_ranks != 0)) {
popts->cs_local_opts[i].odt_rd_cfg = 3;
popts->cs_local_opts[i].odt_wr_cfg = 3;
} else {
popts->cs_local_opts[i].odt_rd_cfg = 0;
popts->cs_local_opts[i].odt_wr_cfg = 4;
}
}
}
/* Get clk_adjust, cpo, write_data_delay, according to the board ddr
* freqency and n_banks specified in board_specific_parameters table.
*/
ddr_freq = get_ddr_freq(0) / 1000000;
for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) {
if (pdimm[j].n_ranks > 0) {
for (i = 0; i < num_params; i++) {
if (ddr_freq >= pbsp->datarate_mhz_low &&
ddr_freq <= pbsp->datarate_mhz_high &&
pdimm[j].n_ranks == pbsp->n_ranks) {
popts->clk_adjust = pbsp->clk_adjust;
popts->cpo_override = pbsp->cpo;
popts->write_data_delay =
pbsp->write_data_delay;
break;
}
pbsp++;
}
}
}
/* 2T timing enable */
popts->twoT_en = 1;
}