mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-16 17:58:23 +00:00
c3904128ad
Currently we have the following behavior in ehci_hcd_init() - Read csmr1 register, clear bit 26 and then set bit 26. However a little bit later we call set_usb_phy_clk() which clears bit 26, so let's get rid of the unnecessary code. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
257 lines
7 KiB
C
257 lines
7 KiB
C
/*
|
|
* Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
|
|
* Copyright (C) 2010 Freescale Semiconductor, Inc.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <usb.h>
|
|
#include <errno.h>
|
|
#include <linux/compiler.h>
|
|
#include <usb/ehci-fsl.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/imx-regs.h>
|
|
#include <asm/arch/clock.h>
|
|
|
|
#include "ehci.h"
|
|
|
|
#define MX5_USBOTHER_REGS_OFFSET 0x800
|
|
|
|
|
|
#define MXC_OTG_OFFSET 0
|
|
#define MXC_H1_OFFSET 0x200
|
|
#define MXC_H2_OFFSET 0x400
|
|
#define MXC_H3_OFFSET 0x600
|
|
|
|
#define MXC_USBCTRL_OFFSET 0
|
|
#define MXC_USB_PHY_CTR_FUNC_OFFSET 0x8
|
|
#define MXC_USB_PHY_CTR_FUNC2_OFFSET 0xc
|
|
#define MXC_USB_CTRL_1_OFFSET 0x10
|
|
#define MXC_USBH2CTRL_OFFSET 0x14
|
|
#define MXC_USBH3CTRL_OFFSET 0x18
|
|
|
|
/* USB_CTRL */
|
|
/* OTG wakeup intr enable */
|
|
#define MXC_OTG_UCTRL_OWIE_BIT (1 << 27)
|
|
/* OTG power mask */
|
|
#define MXC_OTG_UCTRL_OPM_BIT (1 << 24)
|
|
/* OTG power pin polarity */
|
|
#define MXC_OTG_UCTRL_O_PWR_POL_BIT (1 << 24)
|
|
/* Host1 ULPI interrupt enable */
|
|
#define MXC_H1_UCTRL_H1UIE_BIT (1 << 12)
|
|
/* HOST1 wakeup intr enable */
|
|
#define MXC_H1_UCTRL_H1WIE_BIT (1 << 11)
|
|
/* HOST1 power mask */
|
|
#define MXC_H1_UCTRL_H1PM_BIT (1 << 8)
|
|
/* HOST1 power pin polarity */
|
|
#define MXC_H1_UCTRL_H1_PWR_POL_BIT (1 << 8)
|
|
|
|
/* USB_PHY_CTRL_FUNC */
|
|
/* OTG Polarity of Overcurrent */
|
|
#define MXC_OTG_PHYCTRL_OC_POL_BIT (1 << 9)
|
|
/* OTG Disable Overcurrent Event */
|
|
#define MXC_OTG_PHYCTRL_OC_DIS_BIT (1 << 8)
|
|
/* UH1 Polarity of Overcurrent */
|
|
#define MXC_H1_OC_POL_BIT (1 << 6)
|
|
/* UH1 Disable Overcurrent Event */
|
|
#define MXC_H1_OC_DIS_BIT (1 << 5)
|
|
/* OTG Power Pin Polarity */
|
|
#define MXC_OTG_PHYCTRL_PWR_POL_BIT (1 << 3)
|
|
|
|
/* USBH2CTRL */
|
|
#define MXC_H2_UCTRL_H2_OC_POL_BIT (1 << 31)
|
|
#define MXC_H2_UCTRL_H2_OC_DIS_BIT (1 << 30)
|
|
#define MXC_H2_UCTRL_H2UIE_BIT (1 << 8)
|
|
#define MXC_H2_UCTRL_H2WIE_BIT (1 << 7)
|
|
#define MXC_H2_UCTRL_H2PM_BIT (1 << 4)
|
|
#define MXC_H2_UCTRL_H2_PWR_POL_BIT (1 << 4)
|
|
|
|
/* USBH3CTRL */
|
|
#define MXC_H3_UCTRL_H3_OC_POL_BIT (1 << 31)
|
|
#define MXC_H3_UCTRL_H3_OC_DIS_BIT (1 << 30)
|
|
#define MXC_H3_UCTRL_H3UIE_BIT (1 << 8)
|
|
#define MXC_H3_UCTRL_H3WIE_BIT (1 << 7)
|
|
#define MXC_H3_UCTRL_H3_PWR_POL_BIT (1 << 4)
|
|
|
|
/* USB_CTRL_1 */
|
|
#define MXC_USB_CTRL_UH1_EXT_CLK_EN (1 << 25)
|
|
|
|
int mxc_set_usbcontrol(int port, unsigned int flags)
|
|
{
|
|
unsigned int v;
|
|
void __iomem *usb_base = (void __iomem *)OTG_BASE_ADDR;
|
|
void __iomem *usbother_base;
|
|
int ret = 0;
|
|
|
|
usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
|
|
|
|
switch (port) {
|
|
case 0: /* OTG port */
|
|
if (flags & MXC_EHCI_INTERNAL_PHY) {
|
|
v = __raw_readl(usbother_base +
|
|
MXC_USB_PHY_CTR_FUNC_OFFSET);
|
|
if (flags & MXC_EHCI_OC_PIN_ACTIVE_LOW)
|
|
v |= MXC_OTG_PHYCTRL_OC_POL_BIT;
|
|
else
|
|
v &= ~MXC_OTG_PHYCTRL_OC_POL_BIT;
|
|
if (flags & MXC_EHCI_POWER_PINS_ENABLED)
|
|
/* OC/USBPWR is used */
|
|
v &= ~MXC_OTG_PHYCTRL_OC_DIS_BIT;
|
|
else
|
|
/* OC/USBPWR is not used */
|
|
v |= MXC_OTG_PHYCTRL_OC_DIS_BIT;
|
|
#ifdef CONFIG_MX51
|
|
if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
|
|
v |= MXC_OTG_PHYCTRL_PWR_POL_BIT;
|
|
else
|
|
v &= ~MXC_OTG_PHYCTRL_PWR_POL_BIT;
|
|
#endif
|
|
__raw_writel(v, usbother_base +
|
|
MXC_USB_PHY_CTR_FUNC_OFFSET);
|
|
|
|
v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET);
|
|
#ifdef CONFIG_MX51
|
|
if (flags & MXC_EHCI_POWER_PINS_ENABLED)
|
|
v &= ~MXC_OTG_UCTRL_OPM_BIT;
|
|
else
|
|
v |= MXC_OTG_UCTRL_OPM_BIT;
|
|
#endif
|
|
#ifdef CONFIG_MX53
|
|
if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
|
|
v |= MXC_OTG_UCTRL_O_PWR_POL_BIT;
|
|
else
|
|
v &= ~MXC_OTG_UCTRL_O_PWR_POL_BIT;
|
|
#endif
|
|
__raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET);
|
|
}
|
|
break;
|
|
case 1: /* Host 1 ULPI */
|
|
#ifdef CONFIG_MX51
|
|
/* The clock for the USBH1 ULPI port will come externally
|
|
from the PHY. */
|
|
v = __raw_readl(usbother_base + MXC_USB_CTRL_1_OFFSET);
|
|
__raw_writel(v | MXC_USB_CTRL_UH1_EXT_CLK_EN, usbother_base +
|
|
MXC_USB_CTRL_1_OFFSET);
|
|
#endif
|
|
|
|
v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET);
|
|
#ifdef CONFIG_MX51
|
|
if (flags & MXC_EHCI_POWER_PINS_ENABLED)
|
|
v &= ~MXC_H1_UCTRL_H1PM_BIT; /* H1 power mask unused */
|
|
else
|
|
v |= MXC_H1_UCTRL_H1PM_BIT; /* H1 power mask used */
|
|
#endif
|
|
#ifdef CONFIG_MX53
|
|
if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
|
|
v |= MXC_H1_UCTRL_H1_PWR_POL_BIT;
|
|
else
|
|
v &= ~MXC_H1_UCTRL_H1_PWR_POL_BIT;
|
|
#endif
|
|
__raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET);
|
|
|
|
v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
|
|
if (flags & MXC_EHCI_OC_PIN_ACTIVE_LOW)
|
|
v |= MXC_H1_OC_POL_BIT;
|
|
else
|
|
v &= ~MXC_H1_OC_POL_BIT;
|
|
if (flags & MXC_EHCI_POWER_PINS_ENABLED)
|
|
v &= ~MXC_H1_OC_DIS_BIT; /* OC is used */
|
|
else
|
|
v |= MXC_H1_OC_DIS_BIT; /* OC is not used */
|
|
__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
|
|
|
|
break;
|
|
case 2: /* Host 2 ULPI */
|
|
v = __raw_readl(usbother_base + MXC_USBH2CTRL_OFFSET);
|
|
#ifdef CONFIG_MX51
|
|
if (flags & MXC_EHCI_POWER_PINS_ENABLED)
|
|
v &= ~MXC_H2_UCTRL_H2PM_BIT; /* H2 power mask unused */
|
|
else
|
|
v |= MXC_H2_UCTRL_H2PM_BIT; /* H2 power mask used */
|
|
#endif
|
|
#ifdef CONFIG_MX53
|
|
if (flags & MXC_EHCI_OC_PIN_ACTIVE_LOW)
|
|
v |= MXC_H2_UCTRL_H2_OC_POL_BIT;
|
|
else
|
|
v &= ~MXC_H2_UCTRL_H2_OC_POL_BIT;
|
|
if (flags & MXC_EHCI_POWER_PINS_ENABLED)
|
|
v &= ~MXC_H2_UCTRL_H2_OC_DIS_BIT; /* OC is used */
|
|
else
|
|
v |= MXC_H2_UCTRL_H2_OC_DIS_BIT; /* OC is not used */
|
|
if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
|
|
v |= MXC_H2_UCTRL_H2_PWR_POL_BIT;
|
|
else
|
|
v &= ~MXC_H2_UCTRL_H2_PWR_POL_BIT;
|
|
#endif
|
|
__raw_writel(v, usbother_base + MXC_USBH2CTRL_OFFSET);
|
|
break;
|
|
#ifdef CONFIG_MX53
|
|
case 3: /* Host 3 ULPI */
|
|
v = __raw_readl(usbother_base + MXC_USBH3CTRL_OFFSET);
|
|
if (flags & MXC_EHCI_OC_PIN_ACTIVE_LOW)
|
|
v |= MXC_H3_UCTRL_H3_OC_POL_BIT;
|
|
else
|
|
v &= ~MXC_H3_UCTRL_H3_OC_POL_BIT;
|
|
if (flags & MXC_EHCI_POWER_PINS_ENABLED)
|
|
v &= ~MXC_H3_UCTRL_H3_OC_DIS_BIT; /* OC is used */
|
|
else
|
|
v |= MXC_H3_UCTRL_H3_OC_DIS_BIT; /* OC is not used */
|
|
if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
|
|
v |= MXC_H3_UCTRL_H3_PWR_POL_BIT;
|
|
else
|
|
v &= ~MXC_H3_UCTRL_H3_PWR_POL_BIT;
|
|
__raw_writel(v, usbother_base + MXC_USBH3CTRL_OFFSET);
|
|
break;
|
|
#endif
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
int __weak board_ehci_hcd_init(int port)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
void __weak board_ehci_hcd_postinit(struct usb_ehci *ehci, int port)
|
|
{
|
|
}
|
|
|
|
int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor)
|
|
{
|
|
struct usb_ehci *ehci;
|
|
|
|
set_usboh3_clk();
|
|
enable_usboh3_clk(1);
|
|
set_usb_phy_clk();
|
|
enable_usb_phy1_clk(1);
|
|
enable_usb_phy2_clk(1);
|
|
mdelay(1);
|
|
|
|
/* Do board specific initialization */
|
|
board_ehci_hcd_init(CONFIG_MXC_USB_PORT);
|
|
|
|
ehci = (struct usb_ehci *)(OTG_BASE_ADDR +
|
|
(0x200 * CONFIG_MXC_USB_PORT));
|
|
*hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength);
|
|
*hcor = (struct ehci_hcor *)((uint32_t)*hccr +
|
|
HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
|
|
setbits_le32(&ehci->usbmode, CM_HOST);
|
|
|
|
__raw_writel(CONFIG_MXC_USB_PORTSC, &ehci->portsc);
|
|
setbits_le32(&ehci->portsc, USB_EN);
|
|
|
|
mxc_set_usbcontrol(CONFIG_MXC_USB_PORT, CONFIG_MXC_USB_FLAGS);
|
|
mdelay(10);
|
|
|
|
/* Do board specific post-initialization */
|
|
board_ehci_hcd_postinit(ehci, CONFIG_MXC_USB_PORT);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int ehci_hcd_stop(int index)
|
|
{
|
|
return 0;
|
|
}
|