mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-27 05:23:34 +00:00
414cc15144
Use this new Kconfig to simplify the compilation conditions where appropriate. Signed-off-by: Simon Glass <sjg@chromium.org>
461 lines
11 KiB
C
461 lines
11 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
*
|
|
* (C) Copyright 2000-2003
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* Copyright (C) 2004-2009 Freescale Semiconductor, Inc.
|
|
* TsiChung Liew (Tsi-Chung.Liew@freescale.com)
|
|
*
|
|
* Support for DM and DT, non-DM code removed.
|
|
* Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
|
|
*
|
|
* TODO: fsl_dspi.c should work as a driver for the DSPI module.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <log.h>
|
|
#include <asm/global_data.h>
|
|
#include <dm/platform_data/spi_coldfire.h>
|
|
#include <spi.h>
|
|
#include <malloc.h>
|
|
#include <asm/coldfire/dspi.h>
|
|
#include <asm/io.h>
|
|
|
|
struct coldfire_spi_priv {
|
|
struct dspi *regs;
|
|
uint baudrate;
|
|
int mode;
|
|
int charbit;
|
|
};
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#ifndef CONFIG_SPI_IDLE_VAL
|
|
#if defined(CONFIG_SPI_MMC)
|
|
#define CONFIG_SPI_IDLE_VAL 0xFFFF
|
|
#else
|
|
#define CONFIG_SPI_IDLE_VAL 0x0
|
|
#endif
|
|
#endif
|
|
|
|
/*
|
|
* DSPI specific mode
|
|
*
|
|
* bit 31 - 28: Transfer size 3 to 16 bits
|
|
* 27 - 26: PCS to SCK delay prescaler
|
|
* 25 - 24: After SCK delay prescaler
|
|
* 23 - 22: Delay after transfer prescaler
|
|
* 21 : Allow overwrite for bit 31-22 and bit 20-8
|
|
* 20 : Double baud rate
|
|
* 19 - 16: PCS to SCK delay scaler
|
|
* 15 - 12: After SCK delay scaler
|
|
* 11 - 8: Delay after transfer scaler
|
|
* 7 - 0: SPI_CPHA, SPI_CPOL, SPI_LSB_FIRST
|
|
*/
|
|
#define SPI_MODE_MOD 0x00200000
|
|
#define SPI_MODE_DBLRATE 0x00100000
|
|
|
|
#define SPI_MODE_XFER_SZ_MASK 0xf0000000
|
|
#define SPI_MODE_DLY_PRE_MASK 0x0fc00000
|
|
#define SPI_MODE_DLY_SCA_MASK 0x000fff00
|
|
|
|
#define MCF_FRM_SZ_16BIT DSPI_CTAR_TRSZ(0xf)
|
|
#define MCF_DSPI_SPEED_BESTMATCH 0x7FFFFFFF
|
|
#define MCF_DSPI_MAX_CTAR_REGS 8
|
|
|
|
/* Default values */
|
|
#define MCF_DSPI_DEFAULT_SCK_FREQ 10000000
|
|
#define MCF_DSPI_DEFAULT_MAX_CS 4
|
|
#define MCF_DSPI_DEFAULT_MODE 0
|
|
|
|
#define MCF_DSPI_DEFAULT_CTAR (DSPI_CTAR_TRSZ(7) | \
|
|
DSPI_CTAR_PCSSCK_1CLK | \
|
|
DSPI_CTAR_PASC(0) | \
|
|
DSPI_CTAR_PDT(0) | \
|
|
DSPI_CTAR_CSSCK(0) | \
|
|
DSPI_CTAR_ASC(0) | \
|
|
DSPI_CTAR_DT(1) | \
|
|
DSPI_CTAR_BR(6))
|
|
|
|
#define MCF_CTAR_MODE_MASK (MCF_FRM_SZ_16BIT | \
|
|
DSPI_CTAR_PCSSCK(3) | \
|
|
DSPI_CTAR_PASC_7CLK | \
|
|
DSPI_CTAR_PDT(3) | \
|
|
DSPI_CTAR_CSSCK(0x0f) | \
|
|
DSPI_CTAR_ASC(0x0f) | \
|
|
DSPI_CTAR_DT(0x0f))
|
|
|
|
#define setup_ctrl(ctrl, cs) ((ctrl & 0xFF000000) | ((1 << cs) << 16))
|
|
|
|
static inline void cfspi_tx(struct coldfire_spi_priv *cfspi,
|
|
u32 ctrl, u16 data)
|
|
{
|
|
/*
|
|
* Need to check fifo level here
|
|
*/
|
|
while ((readl(&cfspi->regs->sr) & 0x0000F000) >= 0x4000)
|
|
;
|
|
|
|
writel(ctrl | data, &cfspi->regs->tfr);
|
|
}
|
|
|
|
static inline u16 cfspi_rx(struct coldfire_spi_priv *cfspi)
|
|
{
|
|
|
|
while ((readl(&cfspi->regs->sr) & 0x000000F0) == 0)
|
|
;
|
|
|
|
return readw(&cfspi->regs->rfr);
|
|
}
|
|
|
|
static int coldfire_spi_claim_bus(struct udevice *dev)
|
|
{
|
|
struct udevice *bus = dev->parent;
|
|
struct coldfire_spi_priv *cfspi = dev_get_priv(bus);
|
|
struct dspi *dspi = cfspi->regs;
|
|
struct dm_spi_slave_plat *slave_plat =
|
|
dev_get_parent_plat(dev);
|
|
|
|
if ((in_be32(&dspi->sr) & DSPI_SR_TXRXS) != DSPI_SR_TXRXS)
|
|
return -1;
|
|
|
|
/* Clear FIFO and resume transfer */
|
|
clrbits_be32(&dspi->mcr, DSPI_MCR_CTXF | DSPI_MCR_CRXF);
|
|
|
|
dspi_chip_select(slave_plat->cs);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int coldfire_spi_release_bus(struct udevice *dev)
|
|
{
|
|
struct udevice *bus = dev->parent;
|
|
struct coldfire_spi_priv *cfspi = dev_get_priv(bus);
|
|
struct dspi *dspi = cfspi->regs;
|
|
struct dm_spi_slave_plat *slave_plat =
|
|
dev_get_parent_plat(dev);
|
|
|
|
/* Clear FIFO */
|
|
clrbits_be32(&dspi->mcr, DSPI_MCR_CTXF | DSPI_MCR_CRXF);
|
|
|
|
dspi_chip_unselect(slave_plat->cs);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int coldfire_spi_xfer(struct udevice *dev, unsigned int bitlen,
|
|
const void *dout, void *din,
|
|
unsigned long flags)
|
|
{
|
|
struct udevice *bus = dev_get_parent(dev);
|
|
struct coldfire_spi_priv *cfspi = dev_get_priv(bus);
|
|
struct dm_spi_slave_plat *slave_plat = dev_get_parent_plat(dev);
|
|
u16 *spi_rd16 = NULL, *spi_wr16 = NULL;
|
|
u8 *spi_rd = NULL, *spi_wr = NULL;
|
|
static u32 ctrl;
|
|
uint len = bitlen >> 3;
|
|
|
|
if (cfspi->charbit == 16) {
|
|
bitlen >>= 1;
|
|
spi_wr16 = (u16 *)dout;
|
|
spi_rd16 = (u16 *)din;
|
|
} else {
|
|
spi_wr = (u8 *)dout;
|
|
spi_rd = (u8 *)din;
|
|
}
|
|
|
|
if ((flags & SPI_XFER_BEGIN) == SPI_XFER_BEGIN)
|
|
ctrl |= DSPI_TFR_CONT;
|
|
|
|
ctrl = setup_ctrl(ctrl, slave_plat->cs);
|
|
|
|
if (len > 1) {
|
|
int tmp_len = len - 1;
|
|
|
|
while (tmp_len--) {
|
|
if (dout) {
|
|
if (cfspi->charbit == 16)
|
|
cfspi_tx(cfspi, ctrl, *spi_wr16++);
|
|
else
|
|
cfspi_tx(cfspi, ctrl, *spi_wr++);
|
|
cfspi_rx(cfspi);
|
|
}
|
|
|
|
if (din) {
|
|
cfspi_tx(cfspi, ctrl, CONFIG_SPI_IDLE_VAL);
|
|
if (cfspi->charbit == 16)
|
|
*spi_rd16++ = cfspi_rx(cfspi);
|
|
else
|
|
*spi_rd++ = cfspi_rx(cfspi);
|
|
}
|
|
}
|
|
|
|
len = 1; /* remaining byte */
|
|
}
|
|
|
|
if (flags & SPI_XFER_END)
|
|
ctrl &= ~DSPI_TFR_CONT;
|
|
|
|
if (len) {
|
|
if (dout) {
|
|
if (cfspi->charbit == 16)
|
|
cfspi_tx(cfspi, ctrl, *spi_wr16);
|
|
else
|
|
cfspi_tx(cfspi, ctrl, *spi_wr);
|
|
cfspi_rx(cfspi);
|
|
}
|
|
|
|
if (din) {
|
|
cfspi_tx(cfspi, ctrl, CONFIG_SPI_IDLE_VAL);
|
|
if (cfspi->charbit == 16)
|
|
*spi_rd16 = cfspi_rx(cfspi);
|
|
else
|
|
*spi_rd = cfspi_rx(cfspi);
|
|
}
|
|
} else {
|
|
/* dummy read */
|
|
cfspi_tx(cfspi, ctrl, CONFIG_SPI_IDLE_VAL);
|
|
cfspi_rx(cfspi);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int coldfire_spi_set_speed(struct udevice *bus, uint max_hz)
|
|
{
|
|
struct coldfire_spi_priv *cfspi = dev_get_priv(bus);
|
|
struct dspi *dspi = cfspi->regs;
|
|
int prescaler[] = { 2, 3, 5, 7 };
|
|
int scaler[] = {
|
|
2, 4, 6, 8,
|
|
16, 32, 64, 128,
|
|
256, 512, 1024, 2048,
|
|
4096, 8192, 16384, 32768
|
|
};
|
|
int i, j, pbrcnt, brcnt, diff, tmp, dbr = 0;
|
|
int best_i, best_j, bestmatch = MCF_DSPI_SPEED_BESTMATCH, baud_speed;
|
|
u32 bus_setup;
|
|
|
|
cfspi->baudrate = max_hz;
|
|
|
|
/* Read current setup */
|
|
bus_setup = readl(&dspi->ctar[dev_seq(bus)]);
|
|
|
|
tmp = (prescaler[3] * scaler[15]);
|
|
/* Maximum and minimum baudrate it can handle */
|
|
if ((cfspi->baudrate > (gd->bus_clk >> 1)) ||
|
|
(cfspi->baudrate < (gd->bus_clk / tmp))) {
|
|
printf("Exceed baudrate limitation: Max %d - Min %d\n",
|
|
(int)(gd->bus_clk >> 1), (int)(gd->bus_clk / tmp));
|
|
return -1;
|
|
}
|
|
|
|
/* Activate Double Baud when it exceed 1/4 the bus clk */
|
|
if ((bus_setup & DSPI_CTAR_DBR) ||
|
|
(cfspi->baudrate > (gd->bus_clk / (prescaler[0] * scaler[0])))) {
|
|
bus_setup |= DSPI_CTAR_DBR;
|
|
dbr = 1;
|
|
}
|
|
|
|
/* Overwrite default value set in platform configuration file */
|
|
if (cfspi->mode & SPI_MODE_MOD) {
|
|
/*
|
|
* Check to see if it is enabled by default in platform
|
|
* config, or manual setting passed by mode parameter
|
|
*/
|
|
if (cfspi->mode & SPI_MODE_DBLRATE) {
|
|
bus_setup |= DSPI_CTAR_DBR;
|
|
dbr = 1;
|
|
}
|
|
}
|
|
|
|
pbrcnt = sizeof(prescaler) / sizeof(int);
|
|
brcnt = sizeof(scaler) / sizeof(int);
|
|
|
|
/* baudrate calculation - to closer value, may not be exact match */
|
|
for (best_i = 0, best_j = 0, i = 0; i < pbrcnt; i++) {
|
|
baud_speed = gd->bus_clk / prescaler[i];
|
|
for (j = 0; j < brcnt; j++) {
|
|
tmp = (baud_speed / scaler[j]) * (1 + dbr);
|
|
|
|
if (tmp > cfspi->baudrate)
|
|
diff = tmp - cfspi->baudrate;
|
|
else
|
|
diff = cfspi->baudrate - tmp;
|
|
|
|
if (diff < bestmatch) {
|
|
bestmatch = diff;
|
|
best_i = i;
|
|
best_j = j;
|
|
}
|
|
}
|
|
}
|
|
|
|
bus_setup &= ~(DSPI_CTAR_PBR(0x03) | DSPI_CTAR_BR(0x0f));
|
|
bus_setup |= (DSPI_CTAR_PBR(best_i) | DSPI_CTAR_BR(best_j));
|
|
writel(bus_setup, &dspi->ctar[dev_seq(bus)]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int coldfire_spi_set_mode(struct udevice *bus, uint mode)
|
|
{
|
|
struct coldfire_spi_priv *cfspi = dev_get_priv(bus);
|
|
struct dspi *dspi = cfspi->regs;
|
|
u32 bus_setup = 0;
|
|
|
|
cfspi->mode = mode;
|
|
|
|
if (cfspi->mode & SPI_CPOL)
|
|
bus_setup |= DSPI_CTAR_CPOL;
|
|
if (cfspi->mode & SPI_CPHA)
|
|
bus_setup |= DSPI_CTAR_CPHA;
|
|
if (cfspi->mode & SPI_LSB_FIRST)
|
|
bus_setup |= DSPI_CTAR_LSBFE;
|
|
|
|
/* Overwrite default value set in platform configuration file */
|
|
if (cfspi->mode & SPI_MODE_MOD) {
|
|
if ((cfspi->mode & SPI_MODE_XFER_SZ_MASK) == 0)
|
|
bus_setup |=
|
|
readl(&dspi->ctar[dev_seq(bus)]) & MCF_FRM_SZ_16BIT;
|
|
else
|
|
bus_setup |=
|
|
((cfspi->mode & SPI_MODE_XFER_SZ_MASK) >> 1);
|
|
|
|
/* PSCSCK, PASC, PDT */
|
|
bus_setup |= (cfspi->mode & SPI_MODE_DLY_PRE_MASK) >> 4;
|
|
/* CSSCK, ASC, DT */
|
|
bus_setup |= (cfspi->mode & SPI_MODE_DLY_SCA_MASK) >> 4;
|
|
} else {
|
|
bus_setup |=
|
|
(readl(&dspi->ctar[dev_seq(bus)]) & MCF_CTAR_MODE_MASK);
|
|
}
|
|
|
|
cfspi->charbit =
|
|
((readl(&dspi->ctar[dev_seq(bus)]) & MCF_FRM_SZ_16BIT) ==
|
|
MCF_FRM_SZ_16BIT) ? 16 : 8;
|
|
|
|
setbits_be32(&dspi->ctar[dev_seq(bus)], bus_setup);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int coldfire_spi_probe(struct udevice *bus)
|
|
{
|
|
struct coldfire_spi_plat *plat = dev_get_plat(bus);
|
|
struct coldfire_spi_priv *cfspi = dev_get_priv(bus);
|
|
struct dspi *dspi = cfspi->regs;
|
|
int i;
|
|
|
|
cfspi->regs = (struct dspi *)plat->regs_addr;
|
|
|
|
cfspi->baudrate = plat->speed_hz;
|
|
cfspi->mode = plat->mode;
|
|
|
|
for (i = 0; i < MCF_DSPI_MAX_CTAR_REGS; i++) {
|
|
unsigned int ctar = 0;
|
|
|
|
if (plat->ctar[i][0] == 0)
|
|
break;
|
|
|
|
ctar = DSPI_CTAR_TRSZ(plat->ctar[i][0]) |
|
|
DSPI_CTAR_PCSSCK(plat->ctar[i][1]) |
|
|
DSPI_CTAR_PASC(plat->ctar[i][2]) |
|
|
DSPI_CTAR_PDT(plat->ctar[i][3]) |
|
|
DSPI_CTAR_CSSCK(plat->ctar[i][4]) |
|
|
DSPI_CTAR_ASC(plat->ctar[i][5]) |
|
|
DSPI_CTAR_DT(plat->ctar[i][6]) |
|
|
DSPI_CTAR_BR(plat->ctar[i][7]);
|
|
|
|
writel(ctar, &cfspi->regs->ctar[i]);
|
|
}
|
|
|
|
/* Default CTARs */
|
|
for (i = 0; i < MCF_DSPI_MAX_CTAR_REGS; i++)
|
|
writel(MCF_DSPI_DEFAULT_CTAR, &dspi->ctar[i]);
|
|
|
|
dspi->mcr = DSPI_MCR_MSTR | DSPI_MCR_CSIS7 | DSPI_MCR_CSIS6 |
|
|
DSPI_MCR_CSIS5 | DSPI_MCR_CSIS4 | DSPI_MCR_CSIS3 |
|
|
DSPI_MCR_CSIS2 | DSPI_MCR_CSIS1 | DSPI_MCR_CSIS0 |
|
|
DSPI_MCR_CRXF | DSPI_MCR_CTXF;
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if CONFIG_IS_ENABLED(OF_REAL)
|
|
static int coldfire_dspi_of_to_plat(struct udevice *bus)
|
|
{
|
|
fdt_addr_t addr;
|
|
struct coldfire_spi_plat *plat = dev_get_plat(bus);
|
|
const void *blob = gd->fdt_blob;
|
|
int node = dev_of_offset(bus);
|
|
int *ctar, len;
|
|
|
|
addr = dev_read_addr(bus);
|
|
if (addr == FDT_ADDR_T_NONE)
|
|
return -ENOMEM;
|
|
|
|
plat->regs_addr = addr;
|
|
|
|
plat->num_cs = fdtdec_get_int(blob, node, "num-cs",
|
|
MCF_DSPI_DEFAULT_MAX_CS);
|
|
|
|
plat->speed_hz = fdtdec_get_int(blob, node, "spi-max-frequency",
|
|
MCF_DSPI_DEFAULT_SCK_FREQ);
|
|
|
|
plat->mode = fdtdec_get_int(blob, node, "spi-mode",
|
|
MCF_DSPI_DEFAULT_MODE);
|
|
|
|
memset(plat->ctar, 0, sizeof(plat->ctar));
|
|
|
|
ctar = (int *)fdt_getprop(blob, node, "ctar-params", &len);
|
|
|
|
if (ctar && len) {
|
|
int i, q, ctar_regs;
|
|
|
|
ctar_regs = len / sizeof(unsigned int) / MAX_CTAR_FIELDS;
|
|
|
|
if (ctar_regs > MAX_CTAR_REGS)
|
|
ctar_regs = MAX_CTAR_REGS;
|
|
|
|
for (i = 0; i < ctar_regs; i++) {
|
|
for (q = 0; q < MAX_CTAR_FIELDS; q++)
|
|
plat->ctar[i][q] = *ctar++;
|
|
}
|
|
}
|
|
|
|
debug("DSPI: regs=%pa, max-frequency=%d, num-cs=%d, mode=%d\n",
|
|
(void *)plat->regs_addr,
|
|
plat->speed_hz, plat->num_cs, plat->mode);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct udevice_id coldfire_spi_ids[] = {
|
|
{ .compatible = "fsl,mcf-dspi" },
|
|
{ }
|
|
};
|
|
#endif
|
|
|
|
static const struct dm_spi_ops coldfire_spi_ops = {
|
|
.claim_bus = coldfire_spi_claim_bus,
|
|
.release_bus = coldfire_spi_release_bus,
|
|
.xfer = coldfire_spi_xfer,
|
|
.set_speed = coldfire_spi_set_speed,
|
|
.set_mode = coldfire_spi_set_mode,
|
|
};
|
|
|
|
U_BOOT_DRIVER(coldfire_spi) = {
|
|
.name = "spi_coldfire",
|
|
.id = UCLASS_SPI,
|
|
#if CONFIG_IS_ENABLED(OF_REAL)
|
|
.of_match = coldfire_spi_ids,
|
|
.of_to_plat = coldfire_dspi_of_to_plat,
|
|
.plat_auto = sizeof(struct coldfire_spi_plat),
|
|
#endif
|
|
.probe = coldfire_spi_probe,
|
|
.ops = &coldfire_spi_ops,
|
|
.priv_auto = sizeof(struct coldfire_spi_priv),
|
|
};
|