mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-05 20:54:31 +00:00
a09fea1d28
- In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: uboot-stm32@st-md-mailman.stormreply.com Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
197 lines
5.3 KiB
C
197 lines
5.3 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Copyright 2013 Freescale Semiconductor, Inc.
|
|
*
|
|
* Configuration settings for the Freescale Vybrid vf610twr board.
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
#include <asm/arch/imx-regs.h>
|
|
|
|
#define CONFIG_SYS_FSL_CLK
|
|
|
|
#define CONFIG_MACH_TYPE 4146
|
|
|
|
#define CONFIG_SKIP_LOWLEVEL_INIT
|
|
|
|
/* Enable passing of ATAGs */
|
|
#define CONFIG_CMDLINE_TAG
|
|
|
|
/* Size of malloc() pool */
|
|
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
|
|
|
|
/* Allow to overwrite serial and ethaddr */
|
|
#define CONFIG_ENV_OVERWRITE
|
|
|
|
/* NAND support */
|
|
#define CONFIG_SYS_NAND_ONFI_DETECTION
|
|
|
|
#ifdef CONFIG_CMD_NAND
|
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
|
#define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR
|
|
|
|
/* Dynamic MTD partition support */
|
|
#endif
|
|
|
|
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
|
|
#define CONFIG_SYS_FSL_ESDHC_NUM 1
|
|
|
|
#define CONFIG_FEC_MXC
|
|
#define IMX_FEC_BASE ENET_BASE_ADDR
|
|
#define CONFIG_FEC_XCV_TYPE RMII
|
|
#define CONFIG_FEC_MXC_PHYADDR 0
|
|
|
|
/* QSPI Configs*/
|
|
|
|
#ifdef CONFIG_FSL_QSPI
|
|
#define FSL_QSPI_FLASH_SIZE (1 << 24)
|
|
#define FSL_QSPI_FLASH_NUM 2
|
|
#define CONFIG_SYS_FSL_QSPI_LE
|
|
#endif
|
|
|
|
/* I2C Configs */
|
|
#define CONFIG_SYS_I2C
|
|
#define CONFIG_SYS_I2C_MXC
|
|
#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
|
|
#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
|
|
#define CONFIG_SYS_SPD_BUS_NUM 0
|
|
|
|
|
|
#define CONFIG_SYS_LOAD_ADDR 0x82000000
|
|
|
|
/* We boot from the gfxRAM area of the OCRAM. */
|
|
#define CONFIG_BOARD_SIZE_LIMIT 520192
|
|
|
|
/*
|
|
* We do have 128MB of memory on the Vybrid Tower board. Leave the last
|
|
* 16MB alone to avoid conflicts with Cortex-M4 firmwares running from
|
|
* DDR3. Hence, limit the memory range for image processing to 112MB
|
|
* using bootm_size. All of the following must be within this range.
|
|
* We have the default load at 32MB into DDR (for the kernel), FDT at
|
|
* 64MB and the ramdisk 512KB above that (allowing for hopefully never
|
|
* seen large trees). This allows a reasonable split between ramdisk
|
|
* and kernel size, where the ram disk can be a bit larger.
|
|
*/
|
|
#define MEM_LAYOUT_ENV_SETTINGS \
|
|
"bootm_size=0x07000000\0" \
|
|
"loadaddr=0x82000000\0" \
|
|
"kernel_addr_r=0x82000000\0" \
|
|
"fdt_addr=0x84000000\0" \
|
|
"fdt_addr_r=0x84000000\0" \
|
|
"rdaddr=0x84080000\0" \
|
|
"ramdisk_addr_r=0x84080000\0"
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
MEM_LAYOUT_ENV_SETTINGS \
|
|
"script=boot.scr\0" \
|
|
"image=zImage\0" \
|
|
"console=ttyLP1\0" \
|
|
"fdt_file=vf610-twr.dtb\0" \
|
|
"boot_fdt=try\0" \
|
|
"ip_dyn=yes\0" \
|
|
"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
|
|
"mmcpart=1\0" \
|
|
"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
|
|
"update_sd_firmware_filename=u-boot.imx\0" \
|
|
"update_sd_firmware=" \
|
|
"if test ${ip_dyn} = yes; then " \
|
|
"setenv get_cmd dhcp; " \
|
|
"else " \
|
|
"setenv get_cmd tftp; " \
|
|
"fi; " \
|
|
"if mmc dev ${mmcdev}; then " \
|
|
"if ${get_cmd} ${update_sd_firmware_filename}; then " \
|
|
"setexpr fw_sz ${filesize} / 0x200; " \
|
|
"setexpr fw_sz ${fw_sz} + 1; " \
|
|
"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
|
|
"fi; " \
|
|
"fi\0" \
|
|
"mmcargs=setenv bootargs console=${console},${baudrate} " \
|
|
"root=${mmcroot}\0" \
|
|
"loadbootscript=" \
|
|
"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
|
|
"bootscript=echo Running bootscript from mmc ...; " \
|
|
"source\0" \
|
|
"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
|
|
"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
|
|
"mmcboot=echo Booting from mmc ...; " \
|
|
"run mmcargs; " \
|
|
"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
|
|
"if run loadfdt; then " \
|
|
"bootz ${loadaddr} - ${fdt_addr}; " \
|
|
"else " \
|
|
"if test ${boot_fdt} = try; then " \
|
|
"bootz; " \
|
|
"else " \
|
|
"echo WARN: Cannot load the DT; " \
|
|
"fi; " \
|
|
"fi; " \
|
|
"else " \
|
|
"bootz; " \
|
|
"fi;\0" \
|
|
"netargs=setenv bootargs console=${console},${baudrate} " \
|
|
"root=/dev/nfs " \
|
|
"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
|
|
"netboot=echo Booting from net ...; " \
|
|
"run netargs; " \
|
|
"if test ${ip_dyn} = yes; then " \
|
|
"setenv get_cmd dhcp; " \
|
|
"else " \
|
|
"setenv get_cmd tftp; " \
|
|
"fi; " \
|
|
"${get_cmd} ${image}; " \
|
|
"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
|
|
"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
|
|
"bootz ${loadaddr} - ${fdt_addr}; " \
|
|
"else " \
|
|
"if test ${boot_fdt} = try; then " \
|
|
"bootz; " \
|
|
"else " \
|
|
"echo WARN: Cannot load the DT; " \
|
|
"fi; " \
|
|
"fi; " \
|
|
"else " \
|
|
"bootz; " \
|
|
"fi;\0"
|
|
|
|
#define CONFIG_BOOTCOMMAND \
|
|
"mmc dev ${mmcdev}; if mmc rescan; then " \
|
|
"if run loadbootscript; then " \
|
|
"run bootscript; " \
|
|
"else " \
|
|
"if run loadimage; then " \
|
|
"run mmcboot; " \
|
|
"else run netboot; " \
|
|
"fi; " \
|
|
"fi; " \
|
|
"else run netboot; fi"
|
|
|
|
/* Miscellaneous configurable options */
|
|
|
|
#define CONFIG_SYS_MEMTEST_START 0x80010000
|
|
#define CONFIG_SYS_MEMTEST_END 0x87C00000
|
|
|
|
/* Physical memory map */
|
|
#define PHYS_SDRAM (0x80000000)
|
|
#define PHYS_SDRAM_SIZE (128 * 1024 * 1024)
|
|
|
|
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
|
|
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
|
|
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
|
|
|
|
#define CONFIG_SYS_INIT_SP_OFFSET \
|
|
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
|
#define CONFIG_SYS_INIT_SP_ADDR \
|
|
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
|
|
|
|
#ifdef CONFIG_ENV_IS_IN_MMC
|
|
#define CONFIG_SYS_MMC_ENV_DEV 0
|
|
#endif
|
|
|
|
#ifdef CONFIG_ENV_IS_IN_NAND
|
|
#define CONFIG_ENV_RANGE (512 * 1024)
|
|
#endif
|
|
|
|
#endif
|