mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-14 23:33:00 +00:00
336d4615f8
At present dm/device.h includes the linux-compatible features. This requires including linux/compat.h which in turn includes a lot of headers. One of these is malloc.h which we thus end up including in every file in U-Boot. Apart from the inefficiency of this, it is problematic for sandbox which needs to use the system malloc() in some files. Move the compatibility features into a separate header file. Signed-off-by: Simon Glass <sjg@chromium.org>
302 lines
7.1 KiB
C
302 lines
7.1 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Cadence USBSS DRD Driver.
|
|
*
|
|
* Copyright (C) 2018-2019 Cadence.
|
|
* Copyright (C) 2019 Texas Instruments
|
|
*
|
|
* Author: Pawel Laszczak <pawell@cadence.com>
|
|
* Roger Quadros <rogerq@ti.com>
|
|
*
|
|
*
|
|
*/
|
|
#include <dm.h>
|
|
#include <dm/device_compat.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/iopoll.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/usb/otg.h>
|
|
|
|
#include "gadget.h"
|
|
#include "drd.h"
|
|
#include "core.h"
|
|
|
|
#define readl_poll_timeout_atomic readl_poll_timeout
|
|
#define usleep_range(a, b) udelay((b))
|
|
/**
|
|
* cdns3_set_mode - change mode of OTG Core
|
|
* @cdns: pointer to context structure
|
|
* @mode: selected mode from cdns_role
|
|
*
|
|
* Returns 0 on success otherwise negative errno
|
|
*/
|
|
int cdns3_set_mode(struct cdns3 *cdns, enum usb_dr_mode mode)
|
|
{
|
|
int ret = 0;
|
|
u32 reg;
|
|
|
|
switch (mode) {
|
|
case USB_DR_MODE_PERIPHERAL:
|
|
break;
|
|
case USB_DR_MODE_HOST:
|
|
break;
|
|
case USB_DR_MODE_OTG:
|
|
dev_dbg(cdns->dev, "Set controller to OTG mode\n");
|
|
if (cdns->version == CDNS3_CONTROLLER_V1) {
|
|
reg = readl(&cdns->otg_v1_regs->override);
|
|
reg |= OVERRIDE_IDPULLUP;
|
|
writel(reg, &cdns->otg_v1_regs->override);
|
|
} else {
|
|
reg = readl(&cdns->otg_v0_regs->ctrl1);
|
|
reg |= OVERRIDE_IDPULLUP_V0;
|
|
writel(reg, &cdns->otg_v0_regs->ctrl1);
|
|
}
|
|
|
|
/*
|
|
* Hardware specification says: "ID_VALUE must be valid within
|
|
* 50ms after idpullup is set to '1" so driver must wait
|
|
* 50ms before reading this pin.
|
|
*/
|
|
usleep_range(50000, 60000);
|
|
break;
|
|
default:
|
|
dev_err(cdns->dev, "Unsupported mode of operation %d\n", mode);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
int cdns3_get_id(struct cdns3 *cdns)
|
|
{
|
|
int id;
|
|
|
|
id = readl(&cdns->otg_regs->sts) & OTGSTS_ID_VALUE;
|
|
dev_dbg(cdns->dev, "OTG ID: %d", id);
|
|
|
|
return id;
|
|
}
|
|
|
|
int cdns3_get_vbus(struct cdns3 *cdns)
|
|
{
|
|
int vbus;
|
|
|
|
vbus = !!(readl(&cdns->otg_regs->sts) & OTGSTS_VBUS_VALID);
|
|
dev_dbg(cdns->dev, "OTG VBUS: %d", vbus);
|
|
|
|
return vbus;
|
|
}
|
|
|
|
int cdns3_is_host(struct cdns3 *cdns)
|
|
{
|
|
if (cdns->dr_mode == USB_DR_MODE_HOST)
|
|
return 1;
|
|
else if (!cdns3_get_id(cdns))
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int cdns3_is_device(struct cdns3 *cdns)
|
|
{
|
|
if (cdns->dr_mode == USB_DR_MODE_PERIPHERAL)
|
|
return 1;
|
|
else if (cdns->dr_mode == USB_DR_MODE_OTG)
|
|
if (cdns3_get_id(cdns))
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* cdns3_drd_switch_host - start/stop host
|
|
* @cdns: Pointer to controller context structure
|
|
* @on: 1 for start, 0 for stop
|
|
*
|
|
* Returns 0 on success otherwise negative errno
|
|
*/
|
|
int cdns3_drd_switch_host(struct cdns3 *cdns, int on)
|
|
{
|
|
int ret, val;
|
|
u32 reg = OTGCMD_OTG_DIS;
|
|
|
|
/* switch OTG core */
|
|
if (on) {
|
|
writel(OTGCMD_HOST_BUS_REQ | reg, &cdns->otg_regs->cmd);
|
|
|
|
dev_dbg(cdns->dev, "Waiting till Host mode is turned on\n");
|
|
ret = readl_poll_timeout_atomic(&cdns->otg_regs->sts, val,
|
|
val & OTGSTS_XHCI_READY,
|
|
100000);
|
|
if (ret) {
|
|
dev_err(cdns->dev, "timeout waiting for xhci_ready\n");
|
|
return ret;
|
|
}
|
|
} else {
|
|
writel(OTGCMD_HOST_BUS_DROP | OTGCMD_DEV_BUS_DROP |
|
|
OTGCMD_DEV_POWER_OFF | OTGCMD_HOST_POWER_OFF,
|
|
&cdns->otg_regs->cmd);
|
|
/* Waiting till H_IDLE state.*/
|
|
readl_poll_timeout_atomic(&cdns->otg_regs->state, val,
|
|
!(val & OTGSTATE_HOST_STATE_MASK),
|
|
2000000);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* cdns3_drd_switch_gadget - start/stop gadget
|
|
* @cdns: Pointer to controller context structure
|
|
* @on: 1 for start, 0 for stop
|
|
*
|
|
* Returns 0 on success otherwise negative errno
|
|
*/
|
|
int cdns3_drd_switch_gadget(struct cdns3 *cdns, int on)
|
|
{
|
|
int ret, val;
|
|
u32 reg = OTGCMD_OTG_DIS;
|
|
|
|
/* switch OTG core */
|
|
if (on) {
|
|
writel(OTGCMD_DEV_BUS_REQ | reg, &cdns->otg_regs->cmd);
|
|
|
|
dev_dbg(cdns->dev, "Waiting till Device mode is turned on\n");
|
|
|
|
ret = readl_poll_timeout_atomic(&cdns->otg_regs->sts, val,
|
|
val & OTGSTS_DEV_READY,
|
|
100000);
|
|
if (ret) {
|
|
dev_err(cdns->dev, "timeout waiting for dev_ready\n");
|
|
return ret;
|
|
}
|
|
} else {
|
|
/*
|
|
* driver should wait at least 10us after disabling Device
|
|
* before turning-off Device (DEV_BUS_DROP)
|
|
*/
|
|
usleep_range(20, 30);
|
|
writel(OTGCMD_HOST_BUS_DROP | OTGCMD_DEV_BUS_DROP |
|
|
OTGCMD_DEV_POWER_OFF | OTGCMD_HOST_POWER_OFF,
|
|
&cdns->otg_regs->cmd);
|
|
/* Waiting till DEV_IDLE state.*/
|
|
readl_poll_timeout_atomic(&cdns->otg_regs->state, val,
|
|
!(val & OTGSTATE_DEV_STATE_MASK),
|
|
2000000);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* cdns3_init_otg_mode - initialize drd controller
|
|
* @cdns: Pointer to controller context structure
|
|
*
|
|
* Returns 0 on success otherwise negative errno
|
|
*/
|
|
static int cdns3_init_otg_mode(struct cdns3 *cdns)
|
|
{
|
|
int ret = 0;
|
|
|
|
/* clear all interrupts */
|
|
writel(~0, &cdns->otg_regs->ivect);
|
|
|
|
ret = cdns3_set_mode(cdns, USB_DR_MODE_OTG);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* cdns3_drd_update_mode - initialize mode of operation
|
|
* @cdns: Pointer to controller context structure
|
|
*
|
|
* Returns 0 on success otherwise negative errno
|
|
*/
|
|
int cdns3_drd_update_mode(struct cdns3 *cdns)
|
|
{
|
|
int ret = 0;
|
|
|
|
switch (cdns->dr_mode) {
|
|
case USB_DR_MODE_PERIPHERAL:
|
|
ret = cdns3_set_mode(cdns, USB_DR_MODE_PERIPHERAL);
|
|
break;
|
|
case USB_DR_MODE_HOST:
|
|
ret = cdns3_set_mode(cdns, USB_DR_MODE_HOST);
|
|
break;
|
|
case USB_DR_MODE_OTG:
|
|
ret = cdns3_init_otg_mode(cdns);
|
|
break;
|
|
default:
|
|
dev_err(cdns->dev, "Unsupported mode of operation %d\n",
|
|
cdns->dr_mode);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
int cdns3_drd_init(struct cdns3 *cdns)
|
|
{
|
|
void __iomem *regs;
|
|
int ret = 0;
|
|
u32 state;
|
|
|
|
regs = dev_remap_addr_name(cdns->dev, "otg");
|
|
if (!regs)
|
|
return -EINVAL;
|
|
|
|
/* Detection of DRD version. Controller has been released
|
|
* in two versions. Both are similar, but they have same changes
|
|
* in register maps.
|
|
* The first register in old version is command register and it's read
|
|
* only, so driver should read 0 from it. On the other hand, in v1
|
|
* the first register contains device ID number which is not set to 0.
|
|
* Driver uses this fact to detect the proper version of
|
|
* controller.
|
|
*/
|
|
cdns->otg_v0_regs = regs;
|
|
if (!readl(&cdns->otg_v0_regs->cmd)) {
|
|
cdns->version = CDNS3_CONTROLLER_V0;
|
|
cdns->otg_v1_regs = NULL;
|
|
cdns->otg_regs = regs;
|
|
writel(1, &cdns->otg_v0_regs->simulate);
|
|
dev_info(cdns->dev, "DRD version v0 (%08x)\n",
|
|
readl(&cdns->otg_v0_regs->version));
|
|
} else {
|
|
cdns->otg_v0_regs = NULL;
|
|
cdns->otg_v1_regs = regs;
|
|
cdns->otg_regs = (void *)&cdns->otg_v1_regs->cmd;
|
|
cdns->version = CDNS3_CONTROLLER_V1;
|
|
writel(1, &cdns->otg_v1_regs->simulate);
|
|
dev_info(cdns->dev, "DRD version v1 (ID: %08x, rev: %08x)\n",
|
|
readl(&cdns->otg_v1_regs->did),
|
|
readl(&cdns->otg_v1_regs->rid));
|
|
}
|
|
|
|
state = OTGSTS_STRAP(readl(&cdns->otg_regs->sts));
|
|
|
|
/* Update dr_mode according to STRAP configuration. */
|
|
cdns->dr_mode = USB_DR_MODE_OTG;
|
|
if (state == OTGSTS_STRAP_HOST) {
|
|
dev_dbg(cdns->dev, "Controller strapped to HOST\n");
|
|
cdns->dr_mode = USB_DR_MODE_HOST;
|
|
} else if (state == OTGSTS_STRAP_GADGET) {
|
|
dev_dbg(cdns->dev, "Controller strapped to PERIPHERAL\n");
|
|
cdns->dr_mode = USB_DR_MODE_PERIPHERAL;
|
|
}
|
|
|
|
state = readl(&cdns->otg_regs->sts);
|
|
if (OTGSTS_OTG_NRDY(state) != 0) {
|
|
dev_err(cdns->dev, "Cadence USB3 OTG device not ready\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
int cdns3_drd_exit(struct cdns3 *cdns)
|
|
{
|
|
return 0;
|
|
}
|