mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-19 09:43:08 +00:00
f340a162fb
Fix up build step numbering.
Fixes: c727b81d65
("doc: board: ti: k3: Reuse build instructions")
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
259 lines
6.6 KiB
ReStructuredText
259 lines
6.6 KiB
ReStructuredText
.. SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
|
|
.. sectionauthor:: Lokesh Vutla <lokeshvutla@ti.com>
|
|
|
|
J721E Platforms
|
|
===============
|
|
|
|
Introduction:
|
|
-------------
|
|
The J721e family of SoCs are part of K3 Multicore SoC architecture platform
|
|
targeting automotive applications. They are designed as a low power, high
|
|
performance and highly integrated device architecture, adding significant
|
|
enhancement on processing power, graphics capability, video and imaging
|
|
processing, virtualization and coherent memory support.
|
|
|
|
The device is partitioned into three functional domains, each containing
|
|
specific processing cores and peripherals:
|
|
|
|
1. Wake-up (WKUP) domain:
|
|
* Device Management and Security Controller (DMSC)
|
|
|
|
2. Microcontroller (MCU) domain:
|
|
* Dual Core ARM Cortex-R5F processor
|
|
|
|
3. MAIN domain:
|
|
* Dual core 64-bit ARM Cortex-A72
|
|
* 2 x Dual cortex ARM Cortex-R5 subsystem
|
|
* 2 x C66x Digital signal processor sub system
|
|
* C71x Digital signal processor sub-system with MMA.
|
|
|
|
More info can be found in TRM: http://www.ti.com/lit/pdf/spruil1
|
|
|
|
Platform information:
|
|
|
|
* https://www.ti.com/tool/J721EXSOMXEVM
|
|
* https://www.ti.com/tool/SK-TDA4VM
|
|
|
|
Boot Flow:
|
|
----------
|
|
Boot flow is similar to that of AM65x SoC and extending it with remoteproc
|
|
support. Below is the pictorial representation of boot flow:
|
|
|
|
.. image:: img/boot_diagram_j721e.svg
|
|
:alt: Boot flow diagram
|
|
|
|
- Here DMSC acts as master and provides all the critical services. R5/A72
|
|
requests DMSC to get these services done as shown in the above diagram.
|
|
|
|
Sources:
|
|
--------
|
|
|
|
.. include:: k3.rst
|
|
:start-after: .. k3_rst_include_start_boot_sources
|
|
:end-before: .. k3_rst_include_end_boot_sources
|
|
|
|
Build procedure:
|
|
----------------
|
|
0. Setup the environment variables:
|
|
|
|
.. include:: k3.rst
|
|
:start-after: .. k3_rst_include_start_common_env_vars_desc
|
|
:end-before: .. k3_rst_include_end_common_env_vars_desc
|
|
|
|
.. include:: k3.rst
|
|
:start-after: .. k3_rst_include_start_board_env_vars_desc
|
|
:end-before: .. k3_rst_include_end_board_env_vars_desc
|
|
|
|
Set the variables corresponding to this platform:
|
|
|
|
.. include:: k3.rst
|
|
:start-after: .. k3_rst_include_start_common_env_vars_defn
|
|
:end-before: .. k3_rst_include_end_common_env_vars_defn
|
|
.. code-block:: bash
|
|
|
|
$ export UBOOT_CFG_CORTEXR=j721e_evm_r5_defconfig
|
|
$ export UBOOT_CFG_CORTEXA=j721e_evm_a72_defconfig
|
|
$ export TFA_BOARD=generic
|
|
$ # we dont use any extra TFA parameters
|
|
$ unset TFA_EXTRA_ARGS
|
|
$ export OPTEE_PLATFORM=k3-j721e
|
|
$ # we dont use any extra OP-TEE parameters
|
|
$ unset OPTEE_EXTRA_ARGS
|
|
|
|
.. j721e_evm_rst_include_start_build_steps
|
|
|
|
1. Trusted Firmware-A:
|
|
|
|
.. include:: k3.rst
|
|
:start-after: .. k3_rst_include_start_build_steps_tfa
|
|
:end-before: .. k3_rst_include_end_build_steps_tfa
|
|
|
|
|
|
2. OP-TEE:
|
|
|
|
.. include:: k3.rst
|
|
:start-after: .. k3_rst_include_start_build_steps_optee
|
|
:end-before: .. k3_rst_include_end_build_steps_optee
|
|
|
|
3. U-Boot:
|
|
|
|
* 3.1 R5:
|
|
|
|
.. include:: k3.rst
|
|
:start-after: .. k3_rst_include_start_build_steps_spl_r5
|
|
:end-before: .. k3_rst_include_end_build_steps_spl_r5
|
|
|
|
* 3.2 A72:
|
|
|
|
.. include:: k3.rst
|
|
:start-after: .. k3_rst_include_start_build_steps_uboot
|
|
:end-before: .. k3_rst_include_end_build_steps_uboot
|
|
.. j721e_evm_rst_include_end_build_steps
|
|
|
|
Target Images
|
|
--------------
|
|
In order to boot we need tiboot3.bin, sysfw.itb, tispl.bin and u-boot.img.
|
|
Each SoC variant (GP, HS-FS and HS-SE) requires a different source for these
|
|
files.
|
|
|
|
- GP
|
|
|
|
* tiboot3-j721e-gp-evm.bin, sysfw-j721e-gp-evm.itb from step 3.1
|
|
* tispl.bin_unsigned, u-boot.img_unsigned from step 3.2
|
|
|
|
- HS-FS
|
|
|
|
* tiboot3-j721e_sr2-hs-fs-evm.bin, sysfw-j721e_sr2-hs-fs-evm.itb from step 3.1
|
|
* tispl.bin, u-boot.img from step 3.2
|
|
|
|
- HS-SE
|
|
|
|
* tiboot3-j721e_sr2-hs-evm.bin, sysfw-j721e_sr2-hs-evm.itb from step 3.1
|
|
* tispl.bin, u-boot.img from step 3.2
|
|
|
|
Image formats:
|
|
--------------
|
|
|
|
- tiboot3.bin
|
|
|
|
.. image:: img/no_multi_cert_tiboot3.bin.svg
|
|
:alt: tiboot3.bin image format
|
|
|
|
- tispl.bin
|
|
|
|
.. image:: img/dm_tispl.bin.svg
|
|
:alt: tispl.bin image format
|
|
|
|
- sysfw.itb
|
|
|
|
.. image:: img/sysfw.itb.svg
|
|
:alt: sysfw.itb image format
|
|
|
|
R5 Memory Map:
|
|
--------------
|
|
|
|
.. list-table::
|
|
:widths: 16 16 16
|
|
:header-rows: 1
|
|
|
|
* - Region
|
|
- Start Address
|
|
- End Address
|
|
|
|
* - SPL
|
|
- 0x41c00000
|
|
- 0x41c40000
|
|
|
|
* - EMPTY
|
|
- 0x41c40000
|
|
- 0x41c81920
|
|
|
|
* - STACK
|
|
- 0x41c85920
|
|
- 0x41c81920
|
|
|
|
* - Global data
|
|
- 0x41c859f0
|
|
- 0x41c85920
|
|
|
|
* - Heap
|
|
- 0x41c859f0
|
|
- 0x41cf59f0
|
|
|
|
* - BSS
|
|
- 0x41cf59f0
|
|
- 0x41cff9f0
|
|
|
|
* - MCU Scratchpad
|
|
- 0x41cff9fc
|
|
- 0x41cffbfc
|
|
|
|
* - ROM DATA
|
|
- 0x41cffbfc
|
|
- 0x41cfffff
|
|
|
|
OSPI:
|
|
-----
|
|
ROM supports booting from OSPI from offset 0x0.
|
|
|
|
Flashing images to OSPI:
|
|
|
|
Below commands can be used to download tiboot3.bin, tispl.bin, u-boot.img,
|
|
and sysfw.itb over tftp and then flash those to OSPI at their respective
|
|
addresses.
|
|
|
|
.. code-block:: text
|
|
|
|
=> sf probe
|
|
=> tftp ${loadaddr} tiboot3.bin
|
|
=> sf update $loadaddr 0x0 $filesize
|
|
=> tftp ${loadaddr} tispl.bin
|
|
=> sf update $loadaddr 0x80000 $filesize
|
|
=> tftp ${loadaddr} u-boot.img
|
|
=> sf update $loadaddr 0x280000 $filesize
|
|
=> tftp ${loadaddr} sysfw.itb
|
|
=> sf update $loadaddr 0x6C0000 $filesize
|
|
|
|
Flash layout for OSPI:
|
|
|
|
.. image:: img/ospi_sysfw.svg
|
|
:alt: OSPI flash partition layout
|
|
|
|
Firmwares:
|
|
----------
|
|
|
|
The J721e u-boot allows firmware to be loaded for the Cortex-R5 subsystem.
|
|
The CPSW5G in J7200 and CPSW9G in J721E present in MAIN domain is configured
|
|
and controlled by the ethernet firmware that executes in the MAIN Cortex R5.
|
|
The default supported environment variables support loading these firmwares
|
|
from only MMC. "dorprocboot" env variable has to be set for the U-BOOT to load
|
|
and start the remote cores in the system.
|
|
|
|
J721E common processor board can be attached to a Ethernet QSGMII card and the
|
|
PHY in the card has to be reset before it can be used for data transfer.
|
|
"do_main_cpsw0_qsgmii_phyinit" env variable has to be set for the U-BOOT to
|
|
configure this PHY.
|
|
|
|
Debugging U-Boot
|
|
----------------
|
|
|
|
See :ref:`Common Debugging environment - OpenOCD<k3_rst_refer_openocd>`: for
|
|
detailed setup information.
|
|
|
|
.. warning::
|
|
|
|
**OpenOCD support since**: v0.12.0
|
|
|
|
If the default package version of OpenOCD in your development
|
|
environment's distribution needs to be updated, it might be necessary to
|
|
build OpenOCD from the source.
|
|
|
|
.. include:: k3.rst
|
|
:start-after: .. k3_rst_include_start_openocd_connect_XDS110
|
|
:end-before: .. k3_rst_include_end_openocd_connect_XDS110
|
|
|
|
To start OpenOCD and connect to the board
|
|
|
|
.. code-block:: bash
|
|
|
|
openocd -f board/ti_j721eevm.cfg
|