mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-06 13:14:27 +00:00
37cb626da2
The Standard Host Controller Interface (SDHCI) specification version 3.00 adds support for Advanced DMA (ADMA) for both 64 and 32 bit widths of DMA. ADMA2 uses a table of descriptors for aggregating DMA requests. This significantly improves read and write throughput. Add Support for the same. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
477 lines
13 KiB
C
477 lines
13 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Copyright 2011, Marvell Semiconductor Inc.
|
|
* Lei Wen <leiwen@marvell.com>
|
|
*
|
|
* Back ported to the 8xx platform (from the 8260 platform) by
|
|
* Murray.Jensen@cmst.csiro.au, 27-Jan-01.
|
|
*/
|
|
#ifndef __SDHCI_HW_H
|
|
#define __SDHCI_HW_H
|
|
|
|
#include <asm/io.h>
|
|
#include <mmc.h>
|
|
#include <asm/gpio.h>
|
|
|
|
/*
|
|
* Controller registers
|
|
*/
|
|
|
|
#define SDHCI_DMA_ADDRESS 0x00
|
|
|
|
#define SDHCI_BLOCK_SIZE 0x04
|
|
#define SDHCI_MAKE_BLKSZ(dma, blksz) (((dma & 0x7) << 12) | (blksz & 0xFFF))
|
|
|
|
#define SDHCI_BLOCK_COUNT 0x06
|
|
|
|
#define SDHCI_ARGUMENT 0x08
|
|
|
|
#define SDHCI_TRANSFER_MODE 0x0C
|
|
#define SDHCI_TRNS_DMA BIT(0)
|
|
#define SDHCI_TRNS_BLK_CNT_EN BIT(1)
|
|
#define SDHCI_TRNS_ACMD12 BIT(2)
|
|
#define SDHCI_TRNS_READ BIT(4)
|
|
#define SDHCI_TRNS_MULTI BIT(5)
|
|
|
|
#define SDHCI_COMMAND 0x0E
|
|
#define SDHCI_CMD_RESP_MASK 0x03
|
|
#define SDHCI_CMD_CRC 0x08
|
|
#define SDHCI_CMD_INDEX 0x10
|
|
#define SDHCI_CMD_DATA 0x20
|
|
#define SDHCI_CMD_ABORTCMD 0xC0
|
|
|
|
#define SDHCI_CMD_RESP_NONE 0x00
|
|
#define SDHCI_CMD_RESP_LONG 0x01
|
|
#define SDHCI_CMD_RESP_SHORT 0x02
|
|
#define SDHCI_CMD_RESP_SHORT_BUSY 0x03
|
|
|
|
#define SDHCI_MAKE_CMD(c, f) (((c & 0xff) << 8) | (f & 0xff))
|
|
#define SDHCI_GET_CMD(c) ((c>>8) & 0x3f)
|
|
|
|
#define SDHCI_RESPONSE 0x10
|
|
|
|
#define SDHCI_BUFFER 0x20
|
|
|
|
#define SDHCI_PRESENT_STATE 0x24
|
|
#define SDHCI_CMD_INHIBIT BIT(0)
|
|
#define SDHCI_DATA_INHIBIT BIT(1)
|
|
#define SDHCI_DOING_WRITE BIT(8)
|
|
#define SDHCI_DOING_READ BIT(9)
|
|
#define SDHCI_SPACE_AVAILABLE BIT(10)
|
|
#define SDHCI_DATA_AVAILABLE BIT(11)
|
|
#define SDHCI_CARD_PRESENT BIT(16)
|
|
#define SDHCI_CARD_STATE_STABLE BIT(17)
|
|
#define SDHCI_CARD_DETECT_PIN_LEVEL BIT(18)
|
|
#define SDHCI_WRITE_PROTECT BIT(19)
|
|
|
|
#define SDHCI_HOST_CONTROL 0x28
|
|
#define SDHCI_CTRL_LED BIT(0)
|
|
#define SDHCI_CTRL_4BITBUS BIT(1)
|
|
#define SDHCI_CTRL_HISPD BIT(2)
|
|
#define SDHCI_CTRL_DMA_MASK 0x18
|
|
#define SDHCI_CTRL_SDMA 0x00
|
|
#define SDHCI_CTRL_ADMA1 0x08
|
|
#define SDHCI_CTRL_ADMA32 0x10
|
|
#define SDHCI_CTRL_ADMA64 0x18
|
|
#define SDHCI_CTRL_8BITBUS BIT(5)
|
|
#define SDHCI_CTRL_CD_TEST_INS BIT(6)
|
|
#define SDHCI_CTRL_CD_TEST BIT(7)
|
|
|
|
#define SDHCI_POWER_CONTROL 0x29
|
|
#define SDHCI_POWER_ON 0x01
|
|
#define SDHCI_POWER_180 0x0A
|
|
#define SDHCI_POWER_300 0x0C
|
|
#define SDHCI_POWER_330 0x0E
|
|
|
|
#define SDHCI_BLOCK_GAP_CONTROL 0x2A
|
|
|
|
#define SDHCI_WAKE_UP_CONTROL 0x2B
|
|
#define SDHCI_WAKE_ON_INT BIT(0)
|
|
#define SDHCI_WAKE_ON_INSERT BIT(1)
|
|
#define SDHCI_WAKE_ON_REMOVE BIT(2)
|
|
|
|
#define SDHCI_CLOCK_CONTROL 0x2C
|
|
#define SDHCI_DIVIDER_SHIFT 8
|
|
#define SDHCI_DIVIDER_HI_SHIFT 6
|
|
#define SDHCI_DIV_MASK 0xFF
|
|
#define SDHCI_DIV_MASK_LEN 8
|
|
#define SDHCI_DIV_HI_MASK 0x300
|
|
#define SDHCI_PROG_CLOCK_MODE BIT(5)
|
|
#define SDHCI_CLOCK_CARD_EN BIT(2)
|
|
#define SDHCI_CLOCK_INT_STABLE BIT(1)
|
|
#define SDHCI_CLOCK_INT_EN BIT(0)
|
|
|
|
#define SDHCI_TIMEOUT_CONTROL 0x2E
|
|
|
|
#define SDHCI_SOFTWARE_RESET 0x2F
|
|
#define SDHCI_RESET_ALL 0x01
|
|
#define SDHCI_RESET_CMD 0x02
|
|
#define SDHCI_RESET_DATA 0x04
|
|
|
|
#define SDHCI_INT_STATUS 0x30
|
|
#define SDHCI_INT_ENABLE 0x34
|
|
#define SDHCI_SIGNAL_ENABLE 0x38
|
|
#define SDHCI_INT_RESPONSE BIT(0)
|
|
#define SDHCI_INT_DATA_END BIT(1)
|
|
#define SDHCI_INT_DMA_END BIT(3)
|
|
#define SDHCI_INT_SPACE_AVAIL BIT(4)
|
|
#define SDHCI_INT_DATA_AVAIL BIT(5)
|
|
#define SDHCI_INT_CARD_INSERT BIT(6)
|
|
#define SDHCI_INT_CARD_REMOVE BIT(7)
|
|
#define SDHCI_INT_CARD_INT BIT(8)
|
|
#define SDHCI_INT_ERROR BIT(15)
|
|
#define SDHCI_INT_TIMEOUT BIT(16)
|
|
#define SDHCI_INT_CRC BIT(17)
|
|
#define SDHCI_INT_END_BIT BIT(18)
|
|
#define SDHCI_INT_INDEX BIT(19)
|
|
#define SDHCI_INT_DATA_TIMEOUT BIT(20)
|
|
#define SDHCI_INT_DATA_CRC BIT(21)
|
|
#define SDHCI_INT_DATA_END_BIT BIT(22)
|
|
#define SDHCI_INT_BUS_POWER BIT(23)
|
|
#define SDHCI_INT_ACMD12ERR BIT(24)
|
|
#define SDHCI_INT_ADMA_ERROR BIT(25)
|
|
|
|
#define SDHCI_INT_NORMAL_MASK 0x00007FFF
|
|
#define SDHCI_INT_ERROR_MASK 0xFFFF8000
|
|
|
|
#define SDHCI_INT_CMD_MASK (SDHCI_INT_RESPONSE | SDHCI_INT_TIMEOUT | \
|
|
SDHCI_INT_CRC | SDHCI_INT_END_BIT | SDHCI_INT_INDEX)
|
|
#define SDHCI_INT_DATA_MASK (SDHCI_INT_DATA_END | SDHCI_INT_DMA_END | \
|
|
SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL | \
|
|
SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_DATA_CRC | \
|
|
SDHCI_INT_DATA_END_BIT | SDHCI_INT_ADMA_ERROR)
|
|
#define SDHCI_INT_ALL_MASK ((unsigned int)-1)
|
|
|
|
#define SDHCI_ACMD12_ERR 0x3C
|
|
|
|
/* 3E-3F reserved */
|
|
|
|
#define SDHCI_CAPABILITIES 0x40
|
|
#define SDHCI_TIMEOUT_CLK_MASK 0x0000003F
|
|
#define SDHCI_TIMEOUT_CLK_SHIFT 0
|
|
#define SDHCI_TIMEOUT_CLK_UNIT 0x00000080
|
|
#define SDHCI_CLOCK_BASE_MASK 0x00003F00
|
|
#define SDHCI_CLOCK_V3_BASE_MASK 0x0000FF00
|
|
#define SDHCI_CLOCK_BASE_SHIFT 8
|
|
#define SDHCI_MAX_BLOCK_MASK 0x00030000
|
|
#define SDHCI_MAX_BLOCK_SHIFT 16
|
|
#define SDHCI_CAN_DO_8BIT BIT(18)
|
|
#define SDHCI_CAN_DO_ADMA2 BIT(19)
|
|
#define SDHCI_CAN_DO_ADMA1 BIT(20)
|
|
#define SDHCI_CAN_DO_HISPD BIT(21)
|
|
#define SDHCI_CAN_DO_SDMA BIT(22)
|
|
#define SDHCI_CAN_VDD_330 BIT(24)
|
|
#define SDHCI_CAN_VDD_300 BIT(25)
|
|
#define SDHCI_CAN_VDD_180 BIT(26)
|
|
#define SDHCI_CAN_64BIT BIT(28)
|
|
|
|
#define SDHCI_CAPABILITIES_1 0x44
|
|
#define SDHCI_SUPPORT_SDR50 0x00000001
|
|
#define SDHCI_SUPPORT_SDR104 0x00000002
|
|
#define SDHCI_SUPPORT_DDR50 0x00000004
|
|
#define SDHCI_USE_SDR50_TUNING 0x00002000
|
|
|
|
#define SDHCI_CLOCK_MUL_MASK 0x00FF0000
|
|
#define SDHCI_CLOCK_MUL_SHIFT 16
|
|
|
|
#define SDHCI_MAX_CURRENT 0x48
|
|
|
|
/* 4C-4F reserved for more max current */
|
|
|
|
#define SDHCI_SET_ACMD12_ERROR 0x50
|
|
#define SDHCI_SET_INT_ERROR 0x52
|
|
|
|
#define SDHCI_ADMA_ERROR 0x54
|
|
|
|
/* 55-57 reserved */
|
|
|
|
#define SDHCI_ADMA_ADDRESS 0x58
|
|
#define SDHCI_ADMA_ADDRESS_HI 0x5c
|
|
|
|
/* 60-FB reserved */
|
|
|
|
#define SDHCI_SLOT_INT_STATUS 0xFC
|
|
|
|
#define SDHCI_HOST_VERSION 0xFE
|
|
#define SDHCI_VENDOR_VER_MASK 0xFF00
|
|
#define SDHCI_VENDOR_VER_SHIFT 8
|
|
#define SDHCI_SPEC_VER_MASK 0x00FF
|
|
#define SDHCI_SPEC_VER_SHIFT 0
|
|
#define SDHCI_SPEC_100 0
|
|
#define SDHCI_SPEC_200 1
|
|
#define SDHCI_SPEC_300 2
|
|
|
|
#define SDHCI_GET_VERSION(x) (x->version & SDHCI_SPEC_VER_MASK)
|
|
|
|
/*
|
|
* End of controller registers.
|
|
*/
|
|
|
|
#define SDHCI_MAX_DIV_SPEC_200 256
|
|
#define SDHCI_MAX_DIV_SPEC_300 2046
|
|
|
|
/*
|
|
* quirks
|
|
*/
|
|
#define SDHCI_QUIRK_32BIT_DMA_ADDR (1 << 0)
|
|
#define SDHCI_QUIRK_REG32_RW (1 << 1)
|
|
#define SDHCI_QUIRK_BROKEN_R1B (1 << 2)
|
|
#define SDHCI_QUIRK_NO_HISPD_BIT (1 << 3)
|
|
#define SDHCI_QUIRK_BROKEN_VOLTAGE (1 << 4)
|
|
/*
|
|
* SDHCI_QUIRK_BROKEN_HISPD_MODE
|
|
* the hardware cannot operate correctly in high-speed mode,
|
|
* this quirk forces the sdhci host-controller to non high-speed mode
|
|
*/
|
|
#define SDHCI_QUIRK_BROKEN_HISPD_MODE BIT(5)
|
|
#define SDHCI_QUIRK_WAIT_SEND_CMD (1 << 6)
|
|
#define SDHCI_QUIRK_USE_WIDE8 (1 << 8)
|
|
#define SDHCI_QUIRK_NO_1_8_V (1 << 9)
|
|
|
|
/* to make gcc happy */
|
|
struct sdhci_host;
|
|
|
|
/*
|
|
* Host SDMA buffer boundary. Valid values from 4K to 512K in powers of 2.
|
|
*/
|
|
#define SDHCI_DEFAULT_BOUNDARY_SIZE (512 * 1024)
|
|
#define SDHCI_DEFAULT_BOUNDARY_ARG (7)
|
|
struct sdhci_ops {
|
|
#ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS
|
|
u32 (*read_l)(struct sdhci_host *host, int reg);
|
|
u16 (*read_w)(struct sdhci_host *host, int reg);
|
|
u8 (*read_b)(struct sdhci_host *host, int reg);
|
|
void (*write_l)(struct sdhci_host *host, u32 val, int reg);
|
|
void (*write_w)(struct sdhci_host *host, u16 val, int reg);
|
|
void (*write_b)(struct sdhci_host *host, u8 val, int reg);
|
|
#endif
|
|
int (*get_cd)(struct sdhci_host *host);
|
|
void (*set_control_reg)(struct sdhci_host *host);
|
|
void (*set_ios_post)(struct sdhci_host *host);
|
|
void (*set_clock)(struct sdhci_host *host, u32 div);
|
|
int (*platform_execute_tuning)(struct mmc *host, u8 opcode);
|
|
void (*set_delay)(struct sdhci_host *host);
|
|
};
|
|
|
|
#if CONFIG_IS_ENABLED(MMC_SDHCI_ADMA)
|
|
#define ADMA_MAX_LEN 65532
|
|
#ifdef CONFIG_DMA_ADDR_T_64BIT
|
|
#define ADMA_DESC_LEN 16
|
|
#else
|
|
#define ADMA_DESC_LEN 8
|
|
#endif
|
|
#define ADMA_TABLE_NO_ENTRIES (CONFIG_SYS_MMC_MAX_BLK_COUNT * \
|
|
MMC_MAX_BLOCK_LEN) / ADMA_MAX_LEN
|
|
|
|
#define ADMA_TABLE_SZ (ADMA_TABLE_NO_ENTRIES * ADMA_DESC_LEN)
|
|
|
|
/* Decriptor table defines */
|
|
#define ADMA_DESC_ATTR_VALID BIT(0)
|
|
#define ADMA_DESC_ATTR_END BIT(1)
|
|
#define ADMA_DESC_ATTR_INT BIT(2)
|
|
#define ADMA_DESC_ATTR_ACT1 BIT(4)
|
|
#define ADMA_DESC_ATTR_ACT2 BIT(5)
|
|
|
|
#define ADMA_DESC_TRANSFER_DATA ADMA_DESC_ATTR_ACT2
|
|
#define ADMA_DESC_LINK_DESC (ADMA_DESC_ATTR_ACT1 | ADMA_DESC_ATTR_ACT2)
|
|
|
|
struct sdhci_adma_desc {
|
|
u8 attr;
|
|
u8 reserved;
|
|
u16 len;
|
|
u32 addr_lo;
|
|
#ifdef CONFIG_DMA_ADDR_T_64BIT
|
|
u32 addr_hi;
|
|
#endif
|
|
} __packed;
|
|
#endif
|
|
struct sdhci_host {
|
|
const char *name;
|
|
void *ioaddr;
|
|
unsigned int quirks;
|
|
unsigned int host_caps;
|
|
unsigned int version;
|
|
unsigned int max_clk; /* Maximum Base Clock frequency */
|
|
unsigned int clk_mul; /* Clock Multiplier value */
|
|
unsigned int clock;
|
|
struct mmc *mmc;
|
|
const struct sdhci_ops *ops;
|
|
int index;
|
|
|
|
int bus_width;
|
|
struct gpio_desc pwr_gpio; /* Power GPIO */
|
|
struct gpio_desc cd_gpio; /* Card Detect GPIO */
|
|
|
|
uint voltages;
|
|
|
|
struct mmc_config cfg;
|
|
dma_addr_t start_addr;
|
|
int flags;
|
|
#define USE_SDMA (0x1 << 0)
|
|
#define USE_ADMA (0x1 << 1)
|
|
#define USE_ADMA64 (0x1 << 2)
|
|
#define USE_DMA (USE_SDMA | USE_ADMA | USE_ADMA64)
|
|
dma_addr_t adma_addr;
|
|
#if CONFIG_IS_ENABLED(MMC_SDHCI_ADMA)
|
|
struct sdhci_adma_desc *adma_desc_table;
|
|
uint desc_slot;
|
|
#endif
|
|
};
|
|
|
|
#ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS
|
|
|
|
static inline void sdhci_writel(struct sdhci_host *host, u32 val, int reg)
|
|
{
|
|
if (unlikely(host->ops->write_l))
|
|
host->ops->write_l(host, val, reg);
|
|
else
|
|
writel(val, host->ioaddr + reg);
|
|
}
|
|
|
|
static inline void sdhci_writew(struct sdhci_host *host, u16 val, int reg)
|
|
{
|
|
if (unlikely(host->ops->write_w))
|
|
host->ops->write_w(host, val, reg);
|
|
else
|
|
writew(val, host->ioaddr + reg);
|
|
}
|
|
|
|
static inline void sdhci_writeb(struct sdhci_host *host, u8 val, int reg)
|
|
{
|
|
if (unlikely(host->ops->write_b))
|
|
host->ops->write_b(host, val, reg);
|
|
else
|
|
writeb(val, host->ioaddr + reg);
|
|
}
|
|
|
|
static inline u32 sdhci_readl(struct sdhci_host *host, int reg)
|
|
{
|
|
if (unlikely(host->ops->read_l))
|
|
return host->ops->read_l(host, reg);
|
|
else
|
|
return readl(host->ioaddr + reg);
|
|
}
|
|
|
|
static inline u16 sdhci_readw(struct sdhci_host *host, int reg)
|
|
{
|
|
if (unlikely(host->ops->read_w))
|
|
return host->ops->read_w(host, reg);
|
|
else
|
|
return readw(host->ioaddr + reg);
|
|
}
|
|
|
|
static inline u8 sdhci_readb(struct sdhci_host *host, int reg)
|
|
{
|
|
if (unlikely(host->ops->read_b))
|
|
return host->ops->read_b(host, reg);
|
|
else
|
|
return readb(host->ioaddr + reg);
|
|
}
|
|
|
|
#else
|
|
|
|
static inline void sdhci_writel(struct sdhci_host *host, u32 val, int reg)
|
|
{
|
|
writel(val, host->ioaddr + reg);
|
|
}
|
|
|
|
static inline void sdhci_writew(struct sdhci_host *host, u16 val, int reg)
|
|
{
|
|
writew(val, host->ioaddr + reg);
|
|
}
|
|
|
|
static inline void sdhci_writeb(struct sdhci_host *host, u8 val, int reg)
|
|
{
|
|
writeb(val, host->ioaddr + reg);
|
|
}
|
|
static inline u32 sdhci_readl(struct sdhci_host *host, int reg)
|
|
{
|
|
return readl(host->ioaddr + reg);
|
|
}
|
|
|
|
static inline u16 sdhci_readw(struct sdhci_host *host, int reg)
|
|
{
|
|
return readw(host->ioaddr + reg);
|
|
}
|
|
|
|
static inline u8 sdhci_readb(struct sdhci_host *host, int reg)
|
|
{
|
|
return readb(host->ioaddr + reg);
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_BLK
|
|
/**
|
|
* sdhci_setup_cfg() - Set up the configuration for DWMMC
|
|
*
|
|
* This is used to set up an SDHCI device when you are using CONFIG_BLK.
|
|
*
|
|
* This should be called from your MMC driver's probe() method once you have
|
|
* the information required.
|
|
*
|
|
* Generally your driver will have a platform data structure which holds both
|
|
* the configuration (struct mmc_config) and the MMC device info (struct mmc).
|
|
* For example:
|
|
*
|
|
* struct msm_sdhc_plat {
|
|
* struct mmc_config cfg;
|
|
* struct mmc mmc;
|
|
* };
|
|
*
|
|
* ...
|
|
*
|
|
* Inside U_BOOT_DRIVER():
|
|
* .platdata_auto_alloc_size = sizeof(struct msm_sdhc_plat),
|
|
*
|
|
* To access platform data:
|
|
* struct msm_sdhc_plat *plat = dev_get_platdata(dev);
|
|
*
|
|
* See msm_sdhci.c for an example.
|
|
*
|
|
* @cfg: Configuration structure to fill in (generally &plat->mmc)
|
|
* @host: SDHCI host structure
|
|
* @f_max: Maximum supported clock frequency in HZ (0 for default)
|
|
* @f_min: Minimum supported clock frequency in HZ (0 for default)
|
|
*/
|
|
int sdhci_setup_cfg(struct mmc_config *cfg, struct sdhci_host *host,
|
|
u32 f_max, u32 f_min);
|
|
|
|
/**
|
|
* sdhci_bind() - Set up a new MMC block device
|
|
*
|
|
* This is used to set up an SDHCI block device when you are using CONFIG_BLK.
|
|
* It should be called from your driver's bind() method.
|
|
*
|
|
* See msm_sdhci.c for an example.
|
|
*
|
|
* @dev: Device to set up
|
|
* @mmc: Pointer to mmc structure (normally &plat->mmc)
|
|
* @cfg: Empty configuration structure (generally &plat->cfg). This is
|
|
* normally all zeroes at this point. The only purpose of passing
|
|
* this in is to set mmc->cfg to it.
|
|
* @return 0 if OK, -ve if the block device could not be created
|
|
*/
|
|
int sdhci_bind(struct udevice *dev, struct mmc *mmc, struct mmc_config *cfg);
|
|
#else
|
|
|
|
/**
|
|
* add_sdhci() - Add a new SDHCI interface
|
|
*
|
|
* This is used when you are not using CONFIG_BLK. Convert your driver over!
|
|
*
|
|
* @host: SDHCI host structure
|
|
* @f_max: Maximum supported clock frequency in HZ (0 for default)
|
|
* @f_min: Minimum supported clock frequency in HZ (0 for default)
|
|
* @return 0 if OK, -ve on error
|
|
*/
|
|
int add_sdhci(struct sdhci_host *host, u32 f_max, u32 f_min);
|
|
#endif /* !CONFIG_BLK */
|
|
|
|
#ifdef CONFIG_DM_MMC
|
|
/* Export the operations to drivers */
|
|
int sdhci_probe(struct udevice *dev);
|
|
extern const struct dm_mmc_ops sdhci_ops;
|
|
#else
|
|
#endif
|
|
|
|
#endif /* __SDHCI_HW_H */
|