mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-21 10:43:06 +00:00
cbdfe59918
I2S is used to send digital audio data to an audio codec. Add support for this on broadwell. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
301 lines
7.9 KiB
C
301 lines
7.9 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Intel Broadwell I2S driver
|
|
*
|
|
* Copyright 2019 Google LLC
|
|
*
|
|
* Modified from dc i2s/broadwell/broadwell.h
|
|
*/
|
|
|
|
#ifndef __BROADWELL_I2S_H__
|
|
#define __BROADWELL_I2S_H__
|
|
|
|
enum {
|
|
SSP_FIFO_SIZE = 7,
|
|
};
|
|
|
|
enum frame_sync_rel_timing_t {
|
|
NEXT_FRMS_AFTER_END_OF_T4 = 0,
|
|
NEXT_FRMS_WITH_LSB_PREVIOUS_FRM,
|
|
};
|
|
|
|
enum frame_sync_pol_t {
|
|
SSP_FRMS_ACTIVE_LOW = 0,
|
|
SSP_FRMS_ACTIVE_HIGH,
|
|
};
|
|
|
|
enum end_transfer_state_t {
|
|
SSP_END_TRANSFER_STATE_LOW = 0,
|
|
SSP_END_TRANSFER_STATE_PEVIOUS_BIT,
|
|
};
|
|
|
|
enum clock_mode_t {
|
|
/* Data driven (falling), data sampled (rising), idle state (low) */
|
|
SCLK_MODE_DDF_DSR_ISL,
|
|
/* Data driven (rising), data sampled (falling), idle state (low) */
|
|
SCLK_MODE_DDR_DSF_ISL,
|
|
/* Data driven (rising), data sampled (falling), idle state (high) */
|
|
SCLK_MODE_DDR_DSF_ISH,
|
|
/* Data driven (falling), data sampled (rising), idle state (high) */
|
|
SCLK_MODE_DDF_DSR_ISH,
|
|
};
|
|
|
|
struct i2s_shim_regs {
|
|
u32 csr; /* 0x00 */
|
|
u32 reserved0[29]; /* 0x14 - 0x77 */
|
|
u32 clkctl; /* 0x78 */
|
|
u32 reserved1; /* 0x7c */
|
|
u32 cs2; /* 0x80 */
|
|
};
|
|
|
|
struct broadwell_i2s_regs {
|
|
u32 sscr0; /* 0x00 */
|
|
u32 sscr1; /* 0x04 */
|
|
u32 sssr; /* 0x08 */
|
|
u32 ssitr; /* 0x0c */
|
|
u32 ssdr; /* 0x10 */
|
|
u32 reserved0[5]; /* 0x14 - 0x27 */
|
|
u32 ssto; /* 0x28 */
|
|
u32 sspsp; /* 0x2c */
|
|
u32 sstsa; /* 0x30 */
|
|
u32 ssrsa; /* 0x34 */
|
|
u32 sstss; /* 0x38 */
|
|
u32 sscr2; /* 0x40 */
|
|
u32 sspsp2; /* 0x44 */
|
|
};
|
|
|
|
/* SHIM Configuration & Status */
|
|
enum {
|
|
/* Low Power Clock Select */
|
|
SHIM_CS_LPCS = 1 << 31,
|
|
/* SSP Force Clock Running */
|
|
SHIM_CS_SFCR_SSP1 = 1 << 28,
|
|
SHIM_CS_SFCR_SSP0 = 1 << 27,
|
|
/* SSP1 IO Clock Select */
|
|
SHIM_CS_S1IOCS = 1 << 23,
|
|
/* SSP0 IO Clock Select */
|
|
SHIM_CS_S0IOCS = 1 << 21,
|
|
/* Parity Check Enable */
|
|
SHIM_CS_PCE = 1 << 15,
|
|
/* SSP DMA or PIO Mode */
|
|
SHIM_CS_SDPM_PIO_SSP1 = 1 << 12,
|
|
SHIM_CS_SDPM_DMA_SSP1 = 0 << 12,
|
|
SHIM_CS_SDPM_PIO_SSP0 = 1 << 11,
|
|
SHIM_CS_SDPM_DMA_SSP0 = 0 << 11,
|
|
/* Run / Stall */
|
|
SHIM_CS_STALL = 1 << 10,
|
|
/* DSP Clock Select */
|
|
SHIM_CS_DCS_DSP320_AF80 = 0 << 4,
|
|
SHIM_CS_DCS_DSP160_AF80 = 1 << 4,
|
|
SHIM_CS_DCS_DSP80_AF80 = 2 << 4,
|
|
SHIM_CS_DCS_DSP320_AF160 = 4 << 4,
|
|
SHIM_CS_DCS_DSP160_AF160 = 5 << 4,
|
|
SHIM_CS_DCS_DSP32_AF32 = 6 << 4,
|
|
SHIM_CS_DCS_MASK = 7 << 4,
|
|
/* SSP Base Clock Select */
|
|
SHIM_CS_SBCS_SSP0_24MHZ = 1 << 3,
|
|
SHIM_CS_SBCS_SSP0_32MHZ = 0 << 3,
|
|
SHIM_CS_SBCS_SSP1_24MHZ = 1 << 2,
|
|
SHIM_CS_SBCS_SSP1_32MHZ = 0 << 2,
|
|
/* DSP Core Reset */
|
|
SHIM_CS_RST = 1 << 1,
|
|
};
|
|
|
|
/* SHIM Clock Control */
|
|
enum {
|
|
/* Clock Frequency Change In Progress */
|
|
SHIM_CLKCTL_CFCIP = 1 << 31,
|
|
/* SSP MCLK Output Select */
|
|
SHIM_CLKCTL_MCLK_MASK = 0x3,
|
|
SHIM_CLKCTL_MCLK_SHIFT = 24,
|
|
SHIM_CLKCTL_MCLK_DISABLED = 0 << 24,
|
|
SHIM_CLKCTL_MCLK_6MHZ = 1 << 24,
|
|
SHIM_CLKCTL_MCLK_12MHZ = 2 << 24,
|
|
SHIM_CLKCTL_MCLK_24MHZ = 3 << 24,
|
|
/* DSP Core Prevent Local Clock Gating */
|
|
SHIM_CLKCTL_DCPLCG = 1 << 18,
|
|
/* SSP Clock Output Enable */
|
|
SHIM_CLKCTL_SCOE_SSP1 = 1 << 17,
|
|
SHIM_CLKCTL_SCOE_SSP0 = 1 << 16,
|
|
/* DMA Engine Force Local Clock Gating */
|
|
SHIM_CLKCTL_DEFLCGB_DMA1_CGE = 0 << 6,
|
|
SHIM_CLKCTL_DEFLCGB_DMA1_CGD = 1 << 6,
|
|
SHIM_CLKCTL_DEFLCGB_DMA0_CGE = 0 << 5,
|
|
SHIM_CLKCTL_DEFLCGB_DMA0_CGD = 1 << 5,
|
|
/* SSP Force Local Clock Gating */
|
|
SHIM_CLKCTL_SFLCGB_SSP1_CGE = 0 << 1,
|
|
SHIM_CLKCTL_SFLCGB_SSP1_CGD = 1 << 1,
|
|
SHIM_CLKCTL_SFLCGB_SSP0_CGE = 0 << 0,
|
|
SHIM_CLKCTL_SFLCGB_SSP0_CGD = 1 << 0,
|
|
|
|
/* Reserved bits: 30:26, 23:19, 15:7, 4:2 */
|
|
SHIM_CLKCTL_RESERVED = 0x1f << 26 | 0x1f << 19 | 0x1ff << 7 | 0x7 << 2,
|
|
};
|
|
|
|
/* SSP Status */
|
|
enum {
|
|
/* Bit Count Error */
|
|
SSP_SSS_BCE = 1 << 23,
|
|
/* Clock Sync Statu s*/
|
|
SSP_SSS_CSS = 1 << 22,
|
|
/* Transmit FIFO Underrun */
|
|
SSP_SSS_TUR = 1 << 21,
|
|
/* End Of Chain */
|
|
SSP_SSS_EOC = 1 << 20,
|
|
/* Receiver Time-out Interrupt */
|
|
SSP_SSS_TINT = 1 << 19,
|
|
/* Peripheral Trailing Byte Interrupt */
|
|
SSP_SSS_PINT = 1 << 18,
|
|
/* Received FIFO Level */
|
|
SSP_RFL_MASK = 0xf,
|
|
SSP_RFL_SHIFT = 12,
|
|
/* Transmit FIFO Level */
|
|
SSP_TFL_MASK = 0xf,
|
|
SSP_TFL_SHIFT = 8,
|
|
/* Receive FIFO Overrun */
|
|
SSP_SSS_ROR = 1 << 7,
|
|
/* Receive FIFO Service Request */
|
|
SSP_SSS_RFS = 1 << 6,
|
|
/* Transmit FIFO Service Request */
|
|
SSP_SSS_TFS = 1 << 5,
|
|
/* SSP Busy */
|
|
SSP_SSS_BSY = 1 << 4,
|
|
/* Receive FIFO Not Empty */
|
|
SSP_SSS_RNE = 1 << 3,
|
|
/* Transmit FIFO Not Full */
|
|
SSP_SSS_TNF = 1 << 2,
|
|
};
|
|
|
|
/* SSP Control 0 */
|
|
enum {
|
|
/* Mode */
|
|
SSP_SSC0_MODE_NORMAL = 0 << 31,
|
|
SSP_SSC0_MODE_NETWORK = 1 << 31,
|
|
/* Audio Clock Select */
|
|
SSP_SSC0_ACS_PCH = 0 << 30,
|
|
/* Frame Rate Divider Control (0-7) */
|
|
SSP_SSC0_FRDC_MASK = 0x7,
|
|
SSP_SSC0_FRDC_SHIFT = 24,
|
|
SSP_SSC0_FRDC_STEREO = 1 << 24,
|
|
/* Transmit FIFO Underrun Interrupt Mask */
|
|
SSP_SSC0_TIM = 1 << 23,
|
|
/* Receive FIFO Underrun Interrupt Mask */
|
|
SSP_SSC0_RIM = 1 << 22,
|
|
/* Network Clock Select */
|
|
SSP_SSC0_NCS_PCH = 0 << 21,
|
|
/* Extended Data Size Select */
|
|
SSP_SSC0_EDSS = 1 << 20,
|
|
/* Serial Clock Rate (0-4095) */
|
|
SSP_SSC0_SCR_SHIFT = 8,
|
|
SSP_SSC0_SCR_MASK = 0xfff << SSP_SSC0_SCR_SHIFT,
|
|
/* Synchronous Serial Port Enable */
|
|
SSP_SSC0_SSE = 1 << 7,
|
|
/* External Clock Select */
|
|
SSP_SSC0_ECS_PCH = 0 << 6,
|
|
/* Frame Format */
|
|
SSP_SSC0_FRF_MOTOROLA_SPI = 0 << 4,
|
|
SSP_SSC0_FRF_TI_SSP = 1 << 4,
|
|
SSP_SSC0_FRF_NS_MICROWIRE = 2 << 4,
|
|
SSP_SSC0_FRF_PSP = 3 << 4,
|
|
/* Data Size Select */
|
|
SSP_SSC0_DSS_SHIFT = 0,
|
|
SSP_SSC0_DSS_MASK = 0xf << SSP_SSC0_DSS_SHIFT,
|
|
};
|
|
|
|
/* SSP Control 1 */
|
|
enum {
|
|
/* TXD Tristate Enable on Last Phase */
|
|
SSP_SSC1_TTELP = 1 << 31,
|
|
/* TXD Tristate Enable */
|
|
SSP_SSC1_TTE = 1 << 30,
|
|
/* Enable Bit Count Error Interrupt */
|
|
SSP_SSC1_EBCEI = 1 << 29,
|
|
/* Slave Clock Running */
|
|
SSP_SSC1_SCFR = 1 << 28,
|
|
/* Enable Clock Request A */
|
|
SSP_SSC1_ECRA = 1 << 27,
|
|
/* Enable Clock Request B */
|
|
SSP_SSC1_ECRB = 1 << 26,
|
|
/* SSPCLK Direction */
|
|
SSP_SSC1_SCLKDIR_SLAVE = 1 << 25,
|
|
SSP_SSC1_SCLKDIR_MASTER = 0 << 25,
|
|
/* SSPFRM Direction */
|
|
SSP_SSC1_SFRMDIR_SLAVE = 1 << 24,
|
|
SSP_SSC1_SFRMDIR_MASTER = 0 << 24,
|
|
/* Receive without Transmit */
|
|
SSP_SSC1_RWOT = 1 << 23,
|
|
/* Trailing Byte */
|
|
SSP_SSC1_TRAIL = 1 << 22,
|
|
/* DMA Tx Service Request Enable */
|
|
SSP_SSC1_TSRE = 1 << 21,
|
|
/* DMA Rx Service Request Enable */
|
|
SSP_SSC1_RSRE = 1 << 20,
|
|
/* Receiver Timeout Interrupt Enable */
|
|
SSP_SSC1_TINTE = 1 << 19,
|
|
/* Periph. Trailing Byte Int. Enable */
|
|
SSP_SSC1_PINTE = 1 << 18,
|
|
/* Invert Frame Signal */
|
|
SSP_SSC1_IFS = 1 << 16,
|
|
/* Select FIFO for EFWR: test mode */
|
|
SSP_SSC1_STRF = 1 << 15,
|
|
/* Enable FIFO Write/Read: test mode */
|
|
SSP_SSC1_EFWR = 1 << 14,
|
|
/* Receive FIFO Trigger Threshold */
|
|
SSP_SSC1_RFT_SHIFT = 10,
|
|
SSP_SSC1_RFT_MASK = 0xf << SSP_SSC1_RFT_SHIFT,
|
|
/* Transmit FIFO Trigger Threshold */
|
|
SSP_SSC1_TFT_SHIFT = 6,
|
|
SSP_SSC1_TFT_MASK = 0xf << SSP_SSC1_TFT_SHIFT,
|
|
/* Microwire Transmit Data Size */
|
|
SSP_SSC1_MWDS = 1 << 5,
|
|
/* Motorola SPI SSPSCLK Phase Setting*/
|
|
SSP_SSC1_SPH = 1 << 4,
|
|
/* Motorola SPI SSPSCLK Polarity */
|
|
SSP_SSC1_SPO = 1 << 3,
|
|
/* Loopback mode: test mode */
|
|
SSP_SSC1_LBM = 1 << 2,
|
|
/* Transmit FIFO Interrupt Enable */
|
|
SSP_SSC1_TIE = 1 << 1,
|
|
/* Receive FIFO Interrupt Enable */
|
|
SSP_SSC1_RIE = 1 << 0,
|
|
|
|
SSP_SSC1_RESERVED = 17 << 1,
|
|
};
|
|
|
|
/* SSP Programmable Serial Protocol */
|
|
enum {
|
|
/* Extended Dummy Stop (0-31) */
|
|
SSP_PSP_EDYMSTOP_SHIFT = 26,
|
|
SSP_PSP_EDMYSTOP_MASK = 0x7 << SSP_PSP_EDYMSTOP_SHIFT,
|
|
/* Frame Sync Relative Timing */
|
|
SSP_PSP_FSRT = 1 << 25,
|
|
/* Dummy Stop low bits */
|
|
SSP_PSP_DMYSTOP_SHIFT = 23,
|
|
SSP_PSP_DMYSTOP_MASK = 0x3 << SSP_PSP_DMYSTOP_SHIFT,
|
|
/* Serial Frame Width */
|
|
SSP_PSP_SFRMWDTH_SHIFT = 16,
|
|
SSP_PSP_SFRMWDTH_MASK = 0x3f << SSP_PSP_SFRMWDTH_SHIFT,
|
|
/* Serial Frame Delay */
|
|
SSP_PSP_SFRMDLY_MASK = 0x7f,
|
|
SSP_PSP_SFRMDLY_SHIFT = 9,
|
|
/* Start Delay */
|
|
SSP_PSP_STRTDLY_MASK = 0x7,
|
|
SSP_PSP_STRTDLY_SHIFT = 4,
|
|
/* End of Transfer Data State */
|
|
SSP_PSP_ETDS = 1 << 3,
|
|
/* Serial Frame Polarity */
|
|
SSP_PSP_SFRMP = 1 << 2,
|
|
/* Serial Clock Mode */
|
|
SSP_PSP_SCMODE_SHIFT = 0,
|
|
SSP_PSP_SCMODE_MASK = 0x3 << SSP_PSP_SCMODE_SHIFT,
|
|
|
|
SSP_PSP_RESERVED = 1 << 22,
|
|
};
|
|
|
|
/* SSP TX Time Slot Active */
|
|
enum {
|
|
SSP_SSTSA_EN = 1 << 8,
|
|
SSP_SSTSA_MASK = 0xff,
|
|
};
|
|
|
|
#endif /* __BROADWELL_I2S_H__ */
|