mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-26 22:52:18 +00:00
89cb2b5f8b
Update the config.h and defconfig files for the commands that 8e3c036 converted over to Kconfig Signed-off-by: Tom Rini <trini@konsulko.com>
305 lines
9.4 KiB
C
305 lines
9.4 KiB
C
/*
|
|
* tseries.h
|
|
*
|
|
* specific parts for B&R T-Series Motherboard
|
|
*
|
|
* Copyright (C) 2013 Hannes Schmelzer <oe5hpm@oevsv.at> -
|
|
* Bernecker & Rainer Industrieelektronik GmbH - http://www.br-automation.com
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#ifndef __CONFIG_TSERIES_H__
|
|
#define __CONFIG_TSERIES_H__
|
|
|
|
#include <configs/bur_cfg_common.h>
|
|
#include <configs/bur_am335x_common.h>
|
|
/* ------------------------------------------------------------------------- */
|
|
#define CONFIG_AM335X_LCD
|
|
#define CONFIG_LCD
|
|
#define CONFIG_LCD_ROTATION
|
|
#define CONFIG_LCD_DT_SIMPLEFB
|
|
#define CONFIG_SYS_WHITE_ON_BLACK
|
|
#define LCD_BPP LCD_COLOR32
|
|
|
|
#define CONFIG_HW_WATCHDOG
|
|
#define CONFIG_OMAP_WATCHDOG
|
|
#define CONFIG_SPL_WATCHDOG_SUPPORT
|
|
|
|
#define CONFIG_SPL_GPIO_SUPPORT
|
|
/* Bootcount using the RTC block */
|
|
#define CONFIG_SYS_BOOTCOUNT_ADDR 0x44E3E000
|
|
#define CONFIG_BOOTCOUNT_LIMIT
|
|
#define CONFIG_BOOTCOUNT_AM33XX
|
|
|
|
/* memory */
|
|
#define CONFIG_SYS_MALLOC_LEN (5 * 1024 * 1024)
|
|
|
|
/* Clock Defines */
|
|
#define V_OSCK 26000000 /* Clock output from T2 */
|
|
#define V_SCLK (V_OSCK)
|
|
|
|
#define CONFIG_POWER_TPS65217
|
|
|
|
/* Support both device trees and ATAGs. */
|
|
#define CONFIG_USE_FDT /* use fdt within board code */
|
|
#define CONFIG_CMDLINE_TAG
|
|
#define CONFIG_SETUP_MEMORY_TAGS
|
|
#define CONFIG_INITRD_TAG
|
|
/*#define CONFIG_MACH_TYPE 3589*/
|
|
#define CONFIG_MACH_TYPE 0xFFFFFFFF /* TODO: check with kernel*/
|
|
|
|
/* MMC/SD IP block */
|
|
#if defined(CONFIG_EMMC_BOOT)
|
|
#define CONFIG_MMC
|
|
#define CONFIG_GENERIC_MMC
|
|
#define CONFIG_OMAP_HSMMC
|
|
#define CONFIG_SUPPORT_EMMC_BOOT
|
|
/* RAW SD card / eMMC locations. */
|
|
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /*addr. 0x60000 */
|
|
#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
|
|
#define CONFIG_SPL_MMC_SUPPORT
|
|
#endif /* CONFIG_EMMC_BOOT */
|
|
|
|
/*
|
|
* When we have SPI or NAND flash we expect to be making use of mtdparts,
|
|
* both for ease of use in U-Boot and for passing information on to
|
|
* the Linux kernel.
|
|
*/
|
|
#if defined(CONFIG_SPI_BOOT) || defined(CONFIG_NAND)
|
|
#define CONFIG_MTD_DEVICE /* Required for mtdparts */
|
|
#define CONFIG_CMD_MTDPARTS
|
|
#endif /* CONFIG_SPI_BOOT, ... */
|
|
|
|
#undef CONFIG_SPL_OS_BOOT
|
|
#ifdef CONFIG_SPL_OS_BOOT
|
|
#define CONFIG_SYS_SPL_ARGS_ADDR 0x80F80000
|
|
|
|
/* RAW SD card / eMMC */
|
|
#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x900 /* address 0x120000 */
|
|
#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x80 /* address 0x10000 */
|
|
#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0x80 /* 64KiB */
|
|
|
|
/* NAND */
|
|
#ifdef CONFIG_NAND
|
|
#define CONFIG_CMD_SPL_NAND_OFS 0x080000 /* end of u-boot */
|
|
#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x140000
|
|
#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000
|
|
#endif /* CONFIG_NAND */
|
|
#endif /* CONFIG_SPL_OS_BOOT */
|
|
|
|
#ifdef CONFIG_NAND
|
|
#define CONFIG_SPL_NAND_AM33XX_BCH /* OMAP4 and later ELM support */
|
|
#define CONFIG_SPL_NAND_SUPPORT
|
|
#define CONFIG_SPL_NAND_BASE
|
|
#define CONFIG_SPL_NAND_DRIVERS
|
|
#define CONFIG_SPL_NAND_ECC
|
|
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
|
|
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
|
|
#endif /* CONFIG_NAND */
|
|
|
|
/* Always 64 KiB env size */
|
|
#define CONFIG_ENV_SIZE (64 << 10)
|
|
|
|
#ifdef CONFIG_NAND
|
|
#define NANDARGS \
|
|
"mtdids=" MTDIDS_DEFAULT "\0" \
|
|
"mtdparts=" MTDPARTS_DEFAULT "\0" \
|
|
"nandargs=setenv bootargs console=${console} " \
|
|
"${optargs} " \
|
|
"${optargs_rot} " \
|
|
"root=mtd6 " \
|
|
"rootfstype=jffs2\0" \
|
|
"kernelsize=0x400000\0" \
|
|
"nandboot=echo booting from nand ...; " \
|
|
"run nandargs; " \
|
|
"nand read ${loadaddr} kernel ${kernelsize}; " \
|
|
"bootz ${loadaddr} - ${dtbaddr}\0" \
|
|
"defboot=run nandboot\0" \
|
|
"bootlimit=1\0" \
|
|
"simplefb=1\0 " \
|
|
"altbootcmd=run usbscript\0"
|
|
#else
|
|
#define NANDARGS ""
|
|
#endif /* CONFIG_NAND */
|
|
|
|
#ifdef CONFIG_MMC
|
|
#define MMCARGS \
|
|
"dtbdev=mmc\0" \
|
|
"dtbpart=0:1\0" \
|
|
"mmcroot0=setenv bootargs ${optargs_rot} ${optargs} console=${console}\0" \
|
|
"mmcroot1=setenv bootargs ${optargs_rot} ${optargs} console=${console} " \
|
|
"root=/dev/mmcblk0p2 rootfstype=ext4\0" \
|
|
"mmcboot0=echo booting Updatesystem from mmc (ext4-fs) ...; " \
|
|
"setenv simplefb 1; " \
|
|
"ext4load mmc 0:1 ${loadaddr} /${kernel}; " \
|
|
"ext4load mmc 0:1 ${ramaddr} /${ramdisk}; " \
|
|
"run mmcroot0; bootz ${loadaddr} ${ramaddr} ${dtbaddr};\0" \
|
|
"mmcboot1=echo booting PPT-OS from mmc (ext4-fs) ...; " \
|
|
"setenv simplefb 0; " \
|
|
"ext4load mmc 0:2 ${loadaddr} /boot/${kernel}; " \
|
|
"run mmcroot1; bootz ${loadaddr} - ${dtbaddr};\0" \
|
|
"defboot=ext4load mmc 0:2 ${loadaddr} /boot/PPTImage.md5 && run mmcboot1; " \
|
|
"ext4load mmc 0:1 ${dtbaddr} /$dtb && run mmcboot0; " \
|
|
"run ramboot; run usbscript;\0" \
|
|
"bootlimit=1\0" \
|
|
"altbootcmd=run mmcboot0;\0" \
|
|
"upduboot=dhcp; " \
|
|
"tftp ${loadaddr} MLO && mmc write ${loadaddr} 100 100; " \
|
|
"tftp ${loadaddr} u-boot.img && mmc write ${loadaddr} 300 400;\0"
|
|
#else
|
|
#define MMCARGS ""
|
|
#endif /* CONFIG_MMC */
|
|
|
|
#ifndef CONFIG_SPL_BUILD
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
BUR_COMMON_ENV \
|
|
"verify=no\0" \
|
|
"autoload=0\0" \
|
|
"dtb=bur-ppt-ts30.dtb\0" \
|
|
"dtbaddr=0x80100000\0" \
|
|
"loadaddr=0x80200000\0" \
|
|
"ramaddr=0x80A00000\0" \
|
|
"kernel=zImage\0" \
|
|
"ramdisk=rootfs.cpio.uboot\0" \
|
|
"console=ttyO0,115200n8\0" \
|
|
"optargs=consoleblank=0 quiet panic=2\0" \
|
|
"nfsroot=/tftpboot/tseries/rootfs-small\0" \
|
|
"nfsopts=nolock\0" \
|
|
"ramargs=setenv bootargs ${optargs} console=${console} root=/dev/ram0\0" \
|
|
"netargs=setenv bootargs console=${console} " \
|
|
"${optargs} " \
|
|
"root=/dev/nfs " \
|
|
"nfsroot=${serverip}:${nfsroot},${nfsopts} rw " \
|
|
"ip=dhcp\0" \
|
|
"netboot=echo Booting from network ...; " \
|
|
"dhcp; " \
|
|
"tftp ${loadaddr} ${kernel}; " \
|
|
"tftp ${dtbaddr} ${dtb}; " \
|
|
"run netargs; " \
|
|
"bootz ${loadaddr} - ${dtbaddr}\0" \
|
|
"ramboot=echo Booting from network into RAM ...; "\
|
|
"if dhcp; then; " \
|
|
"tftp ${loadaddr} ${kernel}; " \
|
|
"tftp ${ramaddr} ${ramdisk}; " \
|
|
"if ext4load ${dtbdev} ${dtbpart} ${dtbaddr} /${dtb}; " \
|
|
"then; else tftp ${dtbaddr} ${dtb}; fi;" \
|
|
"run mmcroot0; " \
|
|
"bootz ${loadaddr} ${ramaddr} ${dtbaddr}; fi;\0" \
|
|
"netupdate=echo Updating UBOOT from Network (TFTP) ...; " \
|
|
"setenv autoload 0; " \
|
|
"dhcp && tftp 0x80000000 updateUBOOT.img && source;\0" \
|
|
NANDARGS \
|
|
MMCARGS
|
|
#endif /* !CONFIG_SPL_BUILD*/
|
|
|
|
#define CONFIG_BOOTCOMMAND \
|
|
"run defboot;"
|
|
#define CONFIG_BOOTDELAY 0
|
|
|
|
#ifdef CONFIG_NAND
|
|
/*
|
|
* GPMC block. We support 1 device and the physical address to
|
|
* access CS0 at is 0x8000000.
|
|
*/
|
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
|
#define CONFIG_SYS_NAND_BASE 0x8000000
|
|
#define CONFIG_NAND_OMAP_GPMC
|
|
/* don't change OMAP_ELM, ECCSCHEME. ROM code only supports this */
|
|
#define CONFIG_NAND_OMAP_ELM
|
|
#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW
|
|
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
|
|
#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
|
|
#define CONFIG_SYS_NAND_PAGE_SIZE 2048
|
|
#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \
|
|
CONFIG_SYS_NAND_PAGE_SIZE)
|
|
#define CONFIG_SYS_NAND_OOBSIZE 64
|
|
#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
|
|
#define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9, \
|
|
10, 11, 12, 13, 14, 15, 16, 17, \
|
|
18, 19, 20, 21, 22, 23, 24, 25, \
|
|
26, 27, 28, 29, 30, 31, 32, 33, \
|
|
34, 35, 36, 37, 38, 39, 40, 41, \
|
|
42, 43, 44, 45, 46, 47, 48, 49, \
|
|
50, 51, 52, 53, 54, 55, 56, 57, }
|
|
|
|
#define CONFIG_SYS_NAND_ECCSIZE 512
|
|
#define CONFIG_SYS_NAND_ECCBYTES 14
|
|
|
|
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
|
|
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
|
|
|
|
#define MTDIDS_DEFAULT "nand0=omap2-nand.0"
|
|
#define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:" \
|
|
"128k(MLO)," \
|
|
"128k(MLO.backup)," \
|
|
"128k(dtb)," \
|
|
"128k(u-boot-env)," \
|
|
"512k(u-boot)," \
|
|
"4m(kernel),"\
|
|
"128m(rootfs),"\
|
|
"-(user)"
|
|
#define CONFIG_NAND_OMAP_GPMC_WSCFG 1
|
|
#endif /* CONFIG_NAND */
|
|
|
|
/* USB configuration */
|
|
#define CONFIG_USB_MUSB_DSPS
|
|
#define CONFIG_ARCH_MISC_INIT
|
|
#define CONFIG_USB_MUSB_PIO_ONLY
|
|
#define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
|
|
#define CONFIG_AM335X_USB0
|
|
#define CONFIG_AM335X_USB0_MODE MUSB_HOST
|
|
#define CONFIG_AM335X_USB1
|
|
#define CONFIG_AM335X_USB1_MODE MUSB_HOST
|
|
|
|
#if defined(CONFIG_SPI_BOOT)
|
|
/* McSPI IP block */
|
|
#define CONFIG_SPI
|
|
#define CONFIG_OMAP3_SPI
|
|
#define CONFIG_SF_DEFAULT_SPEED 24000000
|
|
|
|
#define CONFIG_SPL_SPI_SUPPORT
|
|
#define CONFIG_SPL_SPI_FLASH_SUPPORT
|
|
#define CONFIG_SPL_SPI_LOAD
|
|
#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000
|
|
#undef CONFIG_ENV_IS_NOWHERE
|
|
#define CONFIG_ENV_IS_IN_SPI_FLASH
|
|
#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
|
|
#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
|
|
#define CONFIG_ENV_SECT_SIZE (4 << 10) /* 4 KB sectors */
|
|
#define CONFIG_ENV_OFFSET (768 << 10) /* 768 KiB in */
|
|
#define CONFIG_ENV_OFFSET_REDUND (896 << 10) /* 896 KiB in */
|
|
|
|
#elif defined(CONFIG_EMMC_BOOT)
|
|
#undef CONFIG_ENV_IS_NOWHERE
|
|
#define CONFIG_ENV_IS_IN_MMC
|
|
#define CONFIG_SYS_MMC_ENV_DEV 0
|
|
#define CONFIG_SYS_MMC_ENV_PART 2
|
|
#define CONFIG_ENV_OFFSET 0x40000 /* TODO: Adresse definieren */
|
|
#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
|
|
#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
|
|
|
|
#elif defined(CONFIG_NAND)
|
|
/* No NAND env support in SPL */
|
|
#ifdef CONFIG_SPL_BUILD
|
|
#define CONFIG_ENV_IS_NOWHERE
|
|
#else
|
|
#define CONFIG_ENV_IS_IN_NAND
|
|
#endif
|
|
#define CONFIG_ENV_OFFSET 0x60000
|
|
#define CONFIG_SYS_ENV_SECT_SIZE CONFIG_ENV_SIZE
|
|
#else
|
|
#error "no storage for Environment defined!"
|
|
#endif
|
|
/*
|
|
* Common filesystems support. When we have removable storage we
|
|
* enabled a number of useful commands and support.
|
|
*/
|
|
#if defined(CONFIG_MMC) || defined(CONFIG_USB_STORAGE)
|
|
#define CONFIG_DOS_PARTITION
|
|
#define CONFIG_FAT_WRITE
|
|
#define CONFIG_FS_EXT4
|
|
#define CONFIG_EXT4_WRITE
|
|
#endif /* CONFIG_MMC, ... */
|
|
|
|
#endif /* ! __CONFIG_TSERIES_H__ */
|