mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-12 07:57:21 +00:00
eaf6ea6a1d
- Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
66 lines
1.7 KiB
C
66 lines
1.7 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* (C) Copyright 2007-2008
|
|
* Stelian Pop <stelian@popies.net>
|
|
* Lead Tech Design <www.leadtechdesign.com>
|
|
*
|
|
* Configuation settings for the AT91SAM9261EK board.
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
/* ARM asynchronous clock */
|
|
#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */
|
|
#define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* 18.432 MHz crystal */
|
|
|
|
#include <asm/hardware.h>
|
|
|
|
/*
|
|
* Hardware drivers
|
|
*/
|
|
|
|
/* LCD */
|
|
#define LCD_BPP LCD_COLOR8
|
|
|
|
/* SDRAM */
|
|
#define CONFIG_SYS_SDRAM_BASE 0x20000000
|
|
#define CONFIG_SYS_SDRAM_SIZE 0x04000000
|
|
#define CONFIG_SYS_INIT_RAM_SIZE (16 * 1024)
|
|
#define CONFIG_SYS_INIT_RAM_ADDR ATMEL_BASE_SRAM
|
|
|
|
/* NAND flash */
|
|
#ifdef CONFIG_CMD_NAND
|
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
|
#define CONFIG_SYS_NAND_BASE 0x40000000
|
|
#define CONFIG_SYS_NAND_DBW_8
|
|
/* our ALE is AD22 */
|
|
#define CONFIG_SYS_NAND_MASK_ALE (1 << 22)
|
|
/* our CLE is AD21 */
|
|
#define CONFIG_SYS_NAND_MASK_CLE (1 << 21)
|
|
#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14
|
|
#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC15
|
|
|
|
#endif
|
|
|
|
/* Ethernet */
|
|
#define CONFIG_DM9000_BASE 0x30000000
|
|
#define DM9000_IO CONFIG_DM9000_BASE
|
|
#define DM9000_DATA (CONFIG_DM9000_BASE + 4)
|
|
#define CONFIG_DM9000_USE_16BIT
|
|
#define CONFIG_DM9000_NO_SROM
|
|
|
|
/* USB */
|
|
#define CONFIG_USB_ATMEL
|
|
#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
|
|
#define CONFIG_USB_OHCI_NEW
|
|
#define CONFIG_SYS_USB_OHCI_CPU_INIT
|
|
#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000 /* AT91SAM9261_UHP_BASE */
|
|
#ifdef CONFIG_AT91SAM9G10EK
|
|
#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9g10"
|
|
#else
|
|
#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9261"
|
|
#endif
|
|
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
|
|
|
|
#endif
|