u-boot/arch/arm/mach-uniphier/clk/Makefile
Masahiro Yamada c21f58548c ARM: uniphier: deassert RST_n of eMMC device for LD11/LD20
For LD11 and LD20 SoCs, the RST_n pin is asserted by default.  If
the EXT_CSD[162], bit[1:0] (RST_n_ENABLE) is fused, the eMMC device
would stay in the reset state until its RST_n pin is deasserted by
software.

Currently, this is cared by an ad-hoc way because the eMMC hardware
reset provider is not supported in U-Boot for now.  This code should
be re-written once the "mmc-pwrseq-emmc" binding is supported.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-02-23 08:37:56 +09:00

33 lines
1.5 KiB
Makefile

#
# SPDX-License-Identifier: GPL-2.0+
#
ifdef CONFIG_SPL_BUILD
obj-$(CONFIG_ARCH_UNIPHIER_SLD3) += clk-early-sld3.o clk-dram-sld3.o dpll-sld3.o
obj-$(CONFIG_ARCH_UNIPHIER_LD4) += clk-early-sld3.o clk-dram-sld3.o dpll-ld4.o
obj-$(CONFIG_ARCH_UNIPHIER_PRO4) += clk-early-sld3.o clk-dram-sld3.o dpll-pro4.o
obj-$(CONFIG_ARCH_UNIPHIER_SLD8) += clk-early-sld3.o clk-dram-sld3.o dpll-sld8.o
obj-$(CONFIG_ARCH_UNIPHIER_PRO5) += clk-early-sld3.o clk-dram-pro5.o dpll-pro5.o
obj-$(CONFIG_ARCH_UNIPHIER_PXS2) += clk-early-sld3.o clk-dram-pxs2.o dpll-pxs2.o
obj-$(CONFIG_ARCH_UNIPHIER_LD6B) += clk-early-sld3.o clk-dram-pxs2.o dpll-pxs2.o
obj-$(CONFIG_ARCH_UNIPHIER_LD11) += clk-early-ld11.o clk-dram-ld11.o dpll-ld11.o
obj-$(CONFIG_ARCH_UNIPHIER_LD20) += clk-early-ld11.o clk-dram-ld20.o dpll-ld20.o
else
obj-$(CONFIG_ARCH_UNIPHIER_SLD3) += clk-ld4.o pll-sld3.o dpll-tail.o
obj-$(CONFIG_ARCH_UNIPHIER_LD4) += clk-ld4.o pll-ld4.o dpll-tail.o
obj-$(CONFIG_ARCH_UNIPHIER_PRO4) += clk-pro4.o pll-pro4.o dpll-tail.o
obj-$(CONFIG_ARCH_UNIPHIER_SLD8) += clk-ld4.o pll-ld4.o dpll-tail.o
obj-$(CONFIG_ARCH_UNIPHIER_PRO5) += clk-pro5.o
obj-$(CONFIG_ARCH_UNIPHIER_PXS2) += clk-pxs2.o
obj-$(CONFIG_ARCH_UNIPHIER_LD6B) += clk-pxs2.o
obj-$(CONFIG_ARCH_UNIPHIER_LD11) += clk-ld11.o pll-ld11.o
obj-$(CONFIG_ARCH_UNIPHIER_LD20) += clk-ld20.o pll-ld20.o
obj-$(CONFIG_ARCH_UNIPHIER_PXS3) += pll-pxs3.o
endif
obj-$(CONFIG_ARCH_UNIPHIER_LD11) += pll-base-ld20.o
obj-$(CONFIG_ARCH_UNIPHIER_LD20) += pll-base-ld20.o