mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-14 08:57:58 +00:00
9171fc8172
All of the duplicated code for Blackfin processors and boot modes have been unified. After all, the core is the same for all processors, just the peripheral set differs (which gets handled in the drivers). Signed-off-by: Mike Frysinger <vapier@gentoo.org>
215 lines
6.3 KiB
C
215 lines
6.3 KiB
C
/*
|
|
* U-boot - Configuration file for BF533 EZKIT board
|
|
*/
|
|
|
|
#ifndef __CONFIG_EZKIT533_H__
|
|
#define __CONFIG_EZKIT533_H__
|
|
|
|
#include <asm/blackfin-config-pre.h>
|
|
|
|
#define CONFIG_BAUDRATE 57600
|
|
|
|
#define CONFIG_BOOTDELAY 5
|
|
#define CFG_AUTOLOAD "no" /*rarpb, bootp or dhcp commands will perform only a */
|
|
|
|
#define CFG_LONGHELP 1
|
|
#define CONFIG_CMDLINE_EDITING 1
|
|
#define CONFIG_LOADADDR 0x01000000 /* default load address */
|
|
#define CONFIG_BOOTCOMMAND "tftp $(loadaddr) linux"
|
|
/* #define CONFIG_BOOTARGS "root=/dev/mtdblock0 rw" */
|
|
|
|
#define CONFIG_DRIVER_SMC91111 1
|
|
#define CONFIG_SMC91111_BASE 0x20310300
|
|
|
|
#if 0
|
|
#define CONFIG_MII
|
|
#define CFG_DISCOVER_PHY
|
|
#endif
|
|
|
|
#define CONFIG_RTC_BFIN 1
|
|
#define CONFIG_BOOT_RETRY_TIME -1 /* Enable this if bootretry required, currently its disabled */
|
|
|
|
#define CONFIG_PANIC_HANG 1
|
|
|
|
#define CONFIG_BFIN_CPU bf533-0.3
|
|
#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_BYPASS
|
|
|
|
/* This sets the default state of the cache on U-Boot's boot */
|
|
#define CONFIG_ICACHE_ON
|
|
#define CONFIG_DCACHE_ON
|
|
|
|
/* CONFIG_CLKIN_HZ is any value in Hz */
|
|
#define CONFIG_CLKIN_HZ 27000000
|
|
/* CONFIG_CLKIN_HALF controls what is passed to PLL 0=CLKIN */
|
|
/* 1=CLKIN/2 */
|
|
#define CONFIG_CLKIN_HALF 0
|
|
/* CONFIG_PLL_BYPASS controls if the PLL is used 0=don't bypass */
|
|
/* 1=bypass PLL */
|
|
#define CONFIG_PLL_BYPASS 0
|
|
/* CONFIG_VCO_MULT controls what the multiplier of the PLL is. */
|
|
/* Values can range from 1-64 */
|
|
#define CONFIG_VCO_MULT 22
|
|
/* CONFIG_CCLK_DIV controls what the core clock divider is */
|
|
/* Values can be 1, 2, 4, or 8 ONLY */
|
|
#define CONFIG_CCLK_DIV 1
|
|
/* CONFIG_SCLK_DIV controls what the peripheral clock divider is */
|
|
/* Values can range from 1-15 */
|
|
#define CONFIG_SCLK_DIV 5
|
|
/* CONFIG_SPI_BAUD controls the SPI peripheral clock divider */
|
|
/* Values can range from 2-65535 */
|
|
/* SCK Frequency = SCLK / (2 * CONFIG_SPI_BAUD) */
|
|
#define CONFIG_SPI_BAUD 2
|
|
#define CONFIG_SPI_BAUD_INITBLOCK 4
|
|
|
|
#if ( CONFIG_CLKIN_HALF == 0 )
|
|
#define CONFIG_VCO_HZ ( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT )
|
|
#else
|
|
#define CONFIG_VCO_HZ (( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT ) / 2 )
|
|
#endif
|
|
|
|
#if (CONFIG_PLL_BYPASS == 0)
|
|
#define CONFIG_CCLK_HZ ( CONFIG_VCO_HZ / CONFIG_CCLK_DIV )
|
|
#define CONFIG_SCLK_HZ ( CONFIG_VCO_HZ / CONFIG_SCLK_DIV )
|
|
#else
|
|
#define CONFIG_CCLK_HZ CONFIG_CLKIN_HZ
|
|
#define CONFIG_SCLK_HZ CONFIG_CLKIN_HZ
|
|
#endif
|
|
|
|
#define CONFIG_MEM_SIZE 32 /* 128, 64, 32, 16 */
|
|
#define CONFIG_MEM_ADD_WDTH 9 /* 8, 9, 10, 11 */
|
|
#define CONFIG_MEM_MT48LC16M16A2TG_75 1
|
|
|
|
#define CONFIG_LOADS_ECHO 1
|
|
|
|
|
|
/*
|
|
* BOOTP options
|
|
*/
|
|
#define CONFIG_BOOTP_BOOTFILESIZE
|
|
#define CONFIG_BOOTP_BOOTPATH
|
|
#define CONFIG_BOOTP_GATEWAY
|
|
#define CONFIG_BOOTP_HOSTNAME
|
|
|
|
|
|
/*
|
|
* Command line configuration.
|
|
*/
|
|
#include <config_cmd_default.h>
|
|
|
|
#define CONFIG_CMD_PING
|
|
#define CONFIG_CMD_ELF
|
|
#define CONFIG_CMD_I2C
|
|
#define CONFIG_CMD_JFFS2
|
|
#define CONFIG_CMD_DATE
|
|
|
|
|
|
#define CONFIG_BOOTARGS "root=/dev/mtdblock0 ip=192.168.0.15:192.168.0.2:192.168.0.1:255.255.255.0:ezkit:eth0:off console=ttyBF0,57600"
|
|
|
|
#define CFG_PROMPT "bfin> " /* Monitor Command Prompt */
|
|
#if defined(CONFIG_CMD_KGDB)
|
|
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
|
|
#else
|
|
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
|
|
#endif
|
|
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
|
|
#define CFG_MAXARGS 16 /* max number of command args */
|
|
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
|
|
#define CFG_MEMTEST_START 0x00000000 /* memtest works on */
|
|
#define CFG_MEMTEST_END ( (CONFIG_MEM_SIZE - 1) * 1024 * 1024) /* 1 ... 31 MB in DRAM */
|
|
#define CFG_LOAD_ADDR 0x01000000 /* default load address */
|
|
#define CFG_HZ 1000 /* decrementer freq: 10 ms ticks */
|
|
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
|
|
#define CFG_SDRAM_BASE 0x00000000
|
|
#define CFG_MAX_RAM_SIZE (CONFIG_MEM_SIZE * 1024 * 1024)
|
|
#define CFG_FLASH_BASE 0x20000000
|
|
|
|
#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
|
|
#define CFG_MONITOR_BASE (CFG_MAX_RAM_SIZE - CFG_MONITOR_LEN)
|
|
#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
|
|
#define CFG_MALLOC_BASE (CFG_MONITOR_BASE - CFG_MALLOC_LEN)
|
|
#define CFG_GBL_DATA_SIZE 0x4000
|
|
#define CFG_GBL_DATA_ADDR (CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE)
|
|
#define CONFIG_STACKBASE (CFG_GBL_DATA_ADDR - 4)
|
|
|
|
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
|
|
#define CFG_FLASH0_BASE 0x20000000
|
|
#define CFG_FLASH1_BASE 0x20200000
|
|
#define CFG_FLASH2_BASE 0x20280000
|
|
#define CFG_MAX_FLASH_BANKS 3 /* max number of memory banks */
|
|
#define CFG_MAX_FLASH_SECT 40 /* max number of sectors on one chip */
|
|
|
|
#define CFG_ENV_IS_IN_FLASH 1
|
|
#define CFG_ENV_ADDR 0x20020000
|
|
#define CFG_ENV_SECT_SIZE 0x10000 /* Total Size of Environment Sector */
|
|
|
|
/* JFFS Partition offset set */
|
|
#define CFG_JFFS2_FIRST_BANK 0
|
|
#define CFG_JFFS2_NUM_BANKS 1
|
|
/* 512k reserved for u-boot */
|
|
#define CFG_JFFS2_FIRST_SECTOR 11
|
|
|
|
|
|
/*
|
|
* Stack sizes
|
|
*/
|
|
#define CONFIG_STACKSIZE (128*1024) /* regular stack */
|
|
|
|
#define POLL_MODE 1
|
|
#define FLASH_TOT_SECT 40
|
|
#define FLASH_SIZE 0x220000
|
|
#define CFG_FLASH_SIZE 0x220000
|
|
|
|
/*
|
|
* Initialize PSD4256 registers for using I2C
|
|
*/
|
|
#define CONFIG_MISC_INIT_R
|
|
|
|
/*
|
|
* I2C settings
|
|
* By default PF1 is used as SDA and PF0 as SCL on the Stamp board
|
|
*/
|
|
#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */
|
|
/*
|
|
* Software (bit-bang) I2C driver configuration
|
|
*/
|
|
#define PF_SCL PF0
|
|
#define PF_SDA PF1
|
|
|
|
#define I2C_INIT (*pFIO_DIR |= PF_SCL); asm("ssync;")
|
|
#define I2C_ACTIVE (*pFIO_DIR |= PF_SDA); *pFIO_INEN &= ~PF_SDA; asm("ssync;")
|
|
#define I2C_TRISTATE (*pFIO_DIR &= ~PF_SDA); *pFIO_INEN |= PF_SDA; asm("ssync;")
|
|
#define I2C_READ ((volatile)(*pFIO_FLAG_D & PF_SDA) != 0); asm("ssync;")
|
|
#define I2C_SDA(bit) if(bit) { \
|
|
*pFIO_FLAG_S = PF_SDA; \
|
|
asm("ssync;"); \
|
|
} \
|
|
else { \
|
|
*pFIO_FLAG_C = PF_SDA; \
|
|
asm("ssync;"); \
|
|
}
|
|
#define I2C_SCL(bit) if(bit) { \
|
|
*pFIO_FLAG_S = PF_SCL; \
|
|
asm("ssync;"); \
|
|
} \
|
|
else { \
|
|
*pFIO_FLAG_C = PF_SCL; \
|
|
asm("ssync;"); \
|
|
}
|
|
#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */
|
|
|
|
#define CFG_I2C_SPEED 50000
|
|
#define CFG_I2C_SLAVE 0xFE
|
|
|
|
#define CFG_BOOTM_LEN 0x4000000 /* Large Image Length, set to 64 Meg */
|
|
|
|
#define CONFIG_EBIU_SDRRC_VAL 0x398
|
|
#define CONFIG_EBIU_SDGCTL_VAL 0x91118d
|
|
#define CONFIG_EBIU_SDBCTL_VAL 0x13
|
|
|
|
#define CONFIG_EBIU_AMGCTL_VAL 0xFF
|
|
#define CONFIG_EBIU_AMBCTL0_VAL 0x7BB07BB0
|
|
#define CONFIG_EBIU_AMBCTL1_VAL 0xFFC27BB0
|
|
|
|
#include <asm/blackfin-config-post.h>
|
|
|
|
#endif
|