mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-11 22:03:15 +00:00
df0ae00041
To enable the GMAC on the RK3368, we need to set up the clocking appropriately to generate a tx_clk for the MAC. This adds an implementation that implements the use of the <&ext_gmac> clock (i.e. an external 125MHz clock for RGMII provided by the PHY). This is the clock setup used by the boards currently supported by U-Boot (i.e. Geekbox, Sheep and RK3368-uQ7). This includes the change from commit - rockchip: clk: rk3368: define GMAC_MUX_SEL_EXTCLK Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
129 lines
2.9 KiB
C
129 lines
2.9 KiB
C
/*
|
|
* (C) Copyright 2017 Rockchip Electronics Co., Ltd
|
|
* Author: Andy Yan <andy.yan@rock-chips.com>
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
#ifndef _ASM_ARCH_CRU_RK3368_H
|
|
#define _ASM_ARCH_CRU_RK3368_H
|
|
|
|
#include <common.h>
|
|
|
|
|
|
/* RK3368 clock numbers */
|
|
enum rk3368_pll_id {
|
|
APLLB,
|
|
APLLL,
|
|
DPLL,
|
|
CPLL,
|
|
GPLL,
|
|
NPLL,
|
|
PLL_COUNT,
|
|
};
|
|
|
|
struct rk3368_cru {
|
|
struct rk3368_pll {
|
|
unsigned int con0;
|
|
unsigned int con1;
|
|
unsigned int con2;
|
|
unsigned int con3;
|
|
} pll[6];
|
|
unsigned int reserved[0x28];
|
|
unsigned int clksel_con[56];
|
|
unsigned int reserved1[8];
|
|
unsigned int clkgate_con[25];
|
|
unsigned int reserved2[7];
|
|
unsigned int glb_srst_fst_val;
|
|
unsigned int glb_srst_snd_val;
|
|
unsigned int reserved3[0x1e];
|
|
unsigned int softrst_con[15];
|
|
unsigned int reserved4[0x11];
|
|
unsigned int misc_con;
|
|
unsigned int glb_cnt_th;
|
|
unsigned int glb_rst_con;
|
|
unsigned int glb_rst_st;
|
|
unsigned int reserved5[0x1c];
|
|
unsigned int sdmmc_con[2];
|
|
unsigned int sdio0_con[2];
|
|
unsigned int sdio1_con[2];
|
|
unsigned int emmc_con[2];
|
|
};
|
|
check_member(rk3368_cru, emmc_con[1], 0x41c);
|
|
|
|
struct rk3368_clk_priv {
|
|
struct rk3368_cru *cru;
|
|
};
|
|
|
|
enum {
|
|
/* PLL CON0 */
|
|
PLL_NR_SHIFT = 8,
|
|
PLL_NR_MASK = GENMASK(13, 8),
|
|
PLL_OD_SHIFT = 0,
|
|
PLL_OD_MASK = GENMASK(3, 0),
|
|
|
|
/* PLL CON1 */
|
|
PLL_LOCK_STA = BIT(31),
|
|
PLL_NF_SHIFT = 0,
|
|
PLL_NF_MASK = GENMASK(12, 0),
|
|
|
|
/* PLL CON2 */
|
|
PLL_BWADJ_SHIFT = 0,
|
|
PLL_BWADJ_MASK = GENMASK(11, 0),
|
|
|
|
/* PLL CON3 */
|
|
PLL_MODE_SHIFT = 8,
|
|
PLL_MODE_MASK = GENMASK(9, 8),
|
|
PLL_MODE_SLOW = 0,
|
|
PLL_MODE_NORMAL = 1,
|
|
PLL_MODE_DEEP_SLOW = 3,
|
|
PLL_RESET_SHIFT = 5,
|
|
PLL_RESET = 1,
|
|
PLL_RESET_MASK = GENMASK(5, 5),
|
|
|
|
/* CLKSEL12_CON */
|
|
MCU_STCLK_DIV_SHIFT = 8,
|
|
MCU_STCLK_DIV_MASK = GENMASK(10, 8),
|
|
MCU_PLL_SEL_SHIFT = 7,
|
|
MCU_PLL_SEL_MASK = BIT(7),
|
|
MCU_PLL_SEL_CPLL = 0,
|
|
MCU_PLL_SEL_GPLL = 1,
|
|
MCU_CLK_DIV_SHIFT = 0,
|
|
MCU_CLK_DIV_MASK = GENMASK(4, 0),
|
|
|
|
/* CLKSEL43_CON */
|
|
GMAC_MUX_SEL_EXTCLK = BIT(8),
|
|
|
|
/* CLKSEL51_CON */
|
|
MMC_PLL_SEL_SHIFT = 8,
|
|
MMC_PLL_SEL_MASK = GENMASK(9, 8),
|
|
MMC_PLL_SEL_CPLL = (0 << MMC_PLL_SEL_SHIFT),
|
|
MMC_PLL_SEL_GPLL = (1 << MMC_PLL_SEL_SHIFT),
|
|
MMC_PLL_SEL_USBPHY_480M = (2 << MMC_PLL_SEL_SHIFT),
|
|
MMC_PLL_SEL_24M = (3 << MMC_PLL_SEL_SHIFT),
|
|
MMC_CLK_DIV_SHIFT = 0,
|
|
MMC_CLK_DIV_MASK = GENMASK(6, 0),
|
|
|
|
/* SOFTRST1_CON */
|
|
MCU_PO_SRST_MASK = BIT(13),
|
|
MCU_SYS_SRST_MASK = BIT(12),
|
|
DMA1_SRST_REQ = BIT(2),
|
|
|
|
/* SOFTRST4_CON */
|
|
DMA2_SRST_REQ = BIT(0),
|
|
|
|
/* GLB_RST_CON */
|
|
PMU_GLB_SRST_CTRL_SHIFT = 2,
|
|
PMU_GLB_SRST_CTRL_MASK = GENMASK(3, 2),
|
|
PMU_RST_BY_FST_GLB_SRST = 0,
|
|
PMU_RST_BY_SND_GLB_SRST = 1,
|
|
PMU_RST_DISABLE = 2,
|
|
WDT_GLB_SRST_CTRL_SHIFT = 1,
|
|
WDT_GLB_SRST_CTRL_MASK = BIT(1),
|
|
WDT_TRIGGER_SND_GLB_SRST = 0,
|
|
WDT_TRIGGER_FST_GLB_SRST = 1,
|
|
TSADC_GLB_SRST_CTRL_SHIFT = 0,
|
|
TSADC_GLB_SRST_CTRL_MASK = BIT(0),
|
|
TSADC_TRIGGER_SND_GLB_SRST = 0,
|
|
TSADC_TRIGGER_FST_GLB_SRST = 1,
|
|
|
|
};
|
|
#endif
|