mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-10 23:24:38 +00:00
ebfa18cb3d
Set the appropriate bits in the interface config register based on the SPI_ mode flags. Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Jagan Teki <jteki@openedev.com> Signed-off-by: Chris Packham <judge.packham@gmail.com>
363 lines
8.2 KiB
C
363 lines
8.2 KiB
C
/*
|
|
* (C) Copyright 2009
|
|
* Marvell Semiconductor <www.marvell.com>
|
|
* Written-by: Prafulla Wadaskar <prafulla@marvell.com>
|
|
*
|
|
* Derived from drivers/spi/mpc8xxx_spi.c
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <malloc.h>
|
|
#include <spi.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/soc.h>
|
|
#ifdef CONFIG_KIRKWOOD
|
|
#include <asm/arch/mpp.h>
|
|
#endif
|
|
#include <asm/arch-mvebu/spi.h>
|
|
|
|
static void _spi_cs_activate(struct kwspi_registers *reg)
|
|
{
|
|
setbits_le32(®->ctrl, KWSPI_CSN_ACT);
|
|
}
|
|
|
|
static void _spi_cs_deactivate(struct kwspi_registers *reg)
|
|
{
|
|
clrbits_le32(®->ctrl, KWSPI_CSN_ACT);
|
|
}
|
|
|
|
static int _spi_xfer(struct kwspi_registers *reg, unsigned int bitlen,
|
|
const void *dout, void *din, unsigned long flags)
|
|
{
|
|
unsigned int tmpdout, tmpdin;
|
|
int tm, isread = 0;
|
|
|
|
debug("spi_xfer: dout %p din %p bitlen %u\n", dout, din, bitlen);
|
|
|
|
if (flags & SPI_XFER_BEGIN)
|
|
_spi_cs_activate(reg);
|
|
|
|
/*
|
|
* handle data in 8-bit chunks
|
|
* TBD: 2byte xfer mode to be enabled
|
|
*/
|
|
clrsetbits_le32(®->cfg, KWSPI_XFERLEN_MASK, KWSPI_XFERLEN_1BYTE);
|
|
|
|
while (bitlen > 4) {
|
|
debug("loopstart bitlen %d\n", bitlen);
|
|
tmpdout = 0;
|
|
|
|
/* Shift data so it's msb-justified */
|
|
if (dout)
|
|
tmpdout = *(u32 *)dout & 0xff;
|
|
|
|
clrbits_le32(®->irq_cause, KWSPI_SMEMRDIRQ);
|
|
writel(tmpdout, ®->dout); /* Write the data out */
|
|
debug("*** spi_xfer: ... %08x written, bitlen %d\n",
|
|
tmpdout, bitlen);
|
|
|
|
/*
|
|
* Wait for SPI transmit to get out
|
|
* or time out (1 second = 1000 ms)
|
|
* The NE event must be read and cleared first
|
|
*/
|
|
for (tm = 0, isread = 0; tm < KWSPI_TIMEOUT; ++tm) {
|
|
if (readl(®->irq_cause) & KWSPI_SMEMRDIRQ) {
|
|
isread = 1;
|
|
tmpdin = readl(®->din);
|
|
debug("spi_xfer: din %p..%08x read\n",
|
|
din, tmpdin);
|
|
|
|
if (din) {
|
|
*((u8 *)din) = (u8)tmpdin;
|
|
din += 1;
|
|
}
|
|
if (dout)
|
|
dout += 1;
|
|
bitlen -= 8;
|
|
}
|
|
if (isread)
|
|
break;
|
|
}
|
|
if (tm >= KWSPI_TIMEOUT)
|
|
printf("*** spi_xfer: Time out during SPI transfer\n");
|
|
|
|
debug("loopend bitlen %d\n", bitlen);
|
|
}
|
|
|
|
if (flags & SPI_XFER_END)
|
|
_spi_cs_deactivate(reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifndef CONFIG_DM_SPI
|
|
|
|
static struct kwspi_registers *spireg =
|
|
(struct kwspi_registers *)MVEBU_SPI_BASE;
|
|
|
|
#ifdef CONFIG_KIRKWOOD
|
|
static u32 cs_spi_mpp_back[2];
|
|
#endif
|
|
|
|
struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
|
|
unsigned int max_hz, unsigned int mode)
|
|
{
|
|
struct spi_slave *slave;
|
|
u32 data;
|
|
#ifdef CONFIG_KIRKWOOD
|
|
static const u32 kwspi_mpp_config[2][2] = {
|
|
{ MPP0_SPI_SCn, 0 }, /* if cs == 0 */
|
|
{ MPP7_SPI_SCn, 0 } /* if cs != 0 */
|
|
};
|
|
#endif
|
|
|
|
if (!spi_cs_is_valid(bus, cs))
|
|
return NULL;
|
|
|
|
slave = spi_alloc_slave_base(bus, cs);
|
|
if (!slave)
|
|
return NULL;
|
|
|
|
writel(KWSPI_SMEMRDY, &spireg->ctrl);
|
|
|
|
/* calculate spi clock prescaller using max_hz */
|
|
data = ((CONFIG_SYS_TCLK / 2) / max_hz) + 0x10;
|
|
data = data < KWSPI_CLKPRESCL_MIN ? KWSPI_CLKPRESCL_MIN : data;
|
|
data = data > KWSPI_CLKPRESCL_MASK ? KWSPI_CLKPRESCL_MASK : data;
|
|
|
|
/* program spi clock prescaller using max_hz */
|
|
writel(KWSPI_ADRLEN_3BYTE | data, &spireg->cfg);
|
|
debug("data = 0x%08x\n", data);
|
|
|
|
writel(KWSPI_SMEMRDIRQ, &spireg->irq_cause);
|
|
writel(KWSPI_IRQMASK, &spireg->irq_mask);
|
|
|
|
#ifdef CONFIG_KIRKWOOD
|
|
/* program mpp registers to select SPI_CSn */
|
|
kirkwood_mpp_conf(kwspi_mpp_config[cs ? 1 : 0], cs_spi_mpp_back);
|
|
#endif
|
|
|
|
return slave;
|
|
}
|
|
|
|
void spi_free_slave(struct spi_slave *slave)
|
|
{
|
|
#ifdef CONFIG_KIRKWOOD
|
|
kirkwood_mpp_conf(cs_spi_mpp_back, NULL);
|
|
#endif
|
|
free(slave);
|
|
}
|
|
|
|
#if defined(CONFIG_SYS_KW_SPI_MPP)
|
|
u32 spi_mpp_backup[4];
|
|
#endif
|
|
|
|
__attribute__((weak)) int board_spi_claim_bus(struct spi_slave *slave)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
int spi_claim_bus(struct spi_slave *slave)
|
|
{
|
|
#if defined(CONFIG_SYS_KW_SPI_MPP)
|
|
u32 config;
|
|
u32 spi_mpp_config[4];
|
|
|
|
config = CONFIG_SYS_KW_SPI_MPP;
|
|
|
|
if (config & MOSI_MPP6)
|
|
spi_mpp_config[0] = MPP6_SPI_MOSI;
|
|
else
|
|
spi_mpp_config[0] = MPP1_SPI_MOSI;
|
|
|
|
if (config & SCK_MPP10)
|
|
spi_mpp_config[1] = MPP10_SPI_SCK;
|
|
else
|
|
spi_mpp_config[1] = MPP2_SPI_SCK;
|
|
|
|
if (config & MISO_MPP11)
|
|
spi_mpp_config[2] = MPP11_SPI_MISO;
|
|
else
|
|
spi_mpp_config[2] = MPP3_SPI_MISO;
|
|
|
|
spi_mpp_config[3] = 0;
|
|
spi_mpp_backup[3] = 0;
|
|
|
|
/* set new spi mpp and save current mpp config */
|
|
kirkwood_mpp_conf(spi_mpp_config, spi_mpp_backup);
|
|
#endif
|
|
|
|
return board_spi_claim_bus(slave);
|
|
}
|
|
|
|
__attribute__((weak)) void board_spi_release_bus(struct spi_slave *slave)
|
|
{
|
|
}
|
|
|
|
void spi_release_bus(struct spi_slave *slave)
|
|
{
|
|
#if defined(CONFIG_SYS_KW_SPI_MPP)
|
|
kirkwood_mpp_conf(spi_mpp_backup, NULL);
|
|
#endif
|
|
|
|
board_spi_release_bus(slave);
|
|
}
|
|
|
|
#ifndef CONFIG_SPI_CS_IS_VALID
|
|
/*
|
|
* you can define this function board specific
|
|
* define above CONFIG in board specific config file and
|
|
* provide the function in board specific src file
|
|
*/
|
|
int spi_cs_is_valid(unsigned int bus, unsigned int cs)
|
|
{
|
|
return bus == 0 && (cs == 0 || cs == 1);
|
|
}
|
|
#endif
|
|
|
|
void spi_init(void)
|
|
{
|
|
}
|
|
|
|
void spi_cs_activate(struct spi_slave *slave)
|
|
{
|
|
_spi_cs_activate(spireg);
|
|
}
|
|
|
|
void spi_cs_deactivate(struct spi_slave *slave)
|
|
{
|
|
_spi_cs_deactivate(spireg);
|
|
}
|
|
|
|
int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
|
|
const void *dout, void *din, unsigned long flags)
|
|
{
|
|
return _spi_xfer(spireg, bitlen, dout, din, flags);
|
|
}
|
|
|
|
#else
|
|
|
|
/* Here now the DM part */
|
|
|
|
struct mvebu_spi_platdata {
|
|
struct kwspi_registers *spireg;
|
|
};
|
|
|
|
struct mvebu_spi_priv {
|
|
struct kwspi_registers *spireg;
|
|
};
|
|
|
|
static int mvebu_spi_set_speed(struct udevice *bus, uint hz)
|
|
{
|
|
struct mvebu_spi_platdata *plat = dev_get_platdata(bus);
|
|
struct kwspi_registers *reg = plat->spireg;
|
|
u32 data;
|
|
|
|
/* calculate spi clock prescaller using max_hz */
|
|
data = ((CONFIG_SYS_TCLK / 2) / hz) + 0x10;
|
|
data = data < KWSPI_CLKPRESCL_MIN ? KWSPI_CLKPRESCL_MIN : data;
|
|
data = data > KWSPI_CLKPRESCL_MASK ? KWSPI_CLKPRESCL_MASK : data;
|
|
|
|
/* program spi clock prescaler using max_hz */
|
|
writel(KWSPI_ADRLEN_3BYTE | data, ®->cfg);
|
|
debug("data = 0x%08x\n", data);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mvebu_spi_set_mode(struct udevice *bus, uint mode)
|
|
{
|
|
struct mvebu_spi_platdata *plat = dev_get_platdata(bus);
|
|
struct kwspi_registers *reg = plat->spireg;
|
|
u32 data = readl(®->cfg);
|
|
|
|
data &= ~(KWSPI_CPHA | KWSPI_CPOL | KWSPI_RXLSBF | KWSPI_TXLSBF);
|
|
|
|
if (mode & SPI_CPHA)
|
|
data |= KWSPI_CPHA;
|
|
if (mode & SPI_CPOL)
|
|
data |= KWSPI_CPOL;
|
|
if (mode & SPI_LSB_FIRST)
|
|
data |= (KWSPI_RXLSBF | KWSPI_TXLSBF);
|
|
|
|
writel(data, ®->cfg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mvebu_spi_xfer(struct udevice *dev, unsigned int bitlen,
|
|
const void *dout, void *din, unsigned long flags)
|
|
{
|
|
struct udevice *bus = dev->parent;
|
|
struct mvebu_spi_platdata *plat = dev_get_platdata(bus);
|
|
|
|
return _spi_xfer(plat->spireg, bitlen, dout, din, flags);
|
|
}
|
|
|
|
static int mvebu_spi_claim_bus(struct udevice *dev)
|
|
{
|
|
struct udevice *bus = dev->parent;
|
|
struct mvebu_spi_platdata *plat = dev_get_platdata(bus);
|
|
|
|
/* Configure the chip-select in the CTRL register */
|
|
clrsetbits_le32(&plat->spireg->ctrl,
|
|
KWSPI_CS_MASK << KWSPI_CS_SHIFT,
|
|
spi_chip_select(dev) << KWSPI_CS_SHIFT);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mvebu_spi_probe(struct udevice *bus)
|
|
{
|
|
struct mvebu_spi_platdata *plat = dev_get_platdata(bus);
|
|
struct kwspi_registers *reg = plat->spireg;
|
|
|
|
writel(KWSPI_SMEMRDY, ®->ctrl);
|
|
writel(KWSPI_SMEMRDIRQ, ®->irq_cause);
|
|
writel(KWSPI_IRQMASK, ®->irq_mask);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mvebu_spi_ofdata_to_platdata(struct udevice *bus)
|
|
{
|
|
struct mvebu_spi_platdata *plat = dev_get_platdata(bus);
|
|
|
|
plat->spireg = (struct kwspi_registers *)dev_get_addr(bus);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dm_spi_ops mvebu_spi_ops = {
|
|
.claim_bus = mvebu_spi_claim_bus,
|
|
.xfer = mvebu_spi_xfer,
|
|
.set_speed = mvebu_spi_set_speed,
|
|
.set_mode = mvebu_spi_set_mode,
|
|
/*
|
|
* cs_info is not needed, since we require all chip selects to be
|
|
* in the device tree explicitly
|
|
*/
|
|
};
|
|
|
|
static const struct udevice_id mvebu_spi_ids[] = {
|
|
{ .compatible = "marvell,armada-375-spi" },
|
|
{ .compatible = "marvell,armada-380-spi" },
|
|
{ .compatible = "marvell,armada-xp-spi" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(mvebu_spi) = {
|
|
.name = "mvebu_spi",
|
|
.id = UCLASS_SPI,
|
|
.of_match = mvebu_spi_ids,
|
|
.ops = &mvebu_spi_ops,
|
|
.ofdata_to_platdata = mvebu_spi_ofdata_to_platdata,
|
|
.platdata_auto_alloc_size = sizeof(struct mvebu_spi_platdata),
|
|
.priv_auto_alloc_size = sizeof(struct mvebu_spi_priv),
|
|
.probe = mvebu_spi_probe,
|
|
};
|
|
#endif
|