u-boot/arch/arm/include/asm/arch-sunxi/gpio.h
Icenowy Zheng c199489f17 sunxi: add basic V3s support
Basic U-Boot support is now present for V3s.

Some memory addresses are changed specially for V3s, as the original
address map cannot fit into a so small DRAM.

As the DRAM controller code needs a big refactor, the SPL support is
disabled in this version.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-04-21 09:23:17 +02:00

243 lines
6.4 KiB
C

/*
* (C) Copyright 2007-2012
* Allwinner Technology Co., Ltd. <www.allwinnertech.com>
* Tom Cubie <tangliang@allwinnertech.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _SUNXI_GPIO_H
#define _SUNXI_GPIO_H
#include <linux/types.h>
#include <asm/arch/cpu.h>
/*
* sunxi has 9 banks of gpio, they are:
* PA0 - PA17 | PB0 - PB23 | PC0 - PC24
* PD0 - PD27 | PE0 - PE31 | PF0 - PF5
* PG0 - PG9 | PH0 - PH27 | PI0 - PI12
*/
#define SUNXI_GPIO_A 0
#define SUNXI_GPIO_B 1
#define SUNXI_GPIO_C 2
#define SUNXI_GPIO_D 3
#define SUNXI_GPIO_E 4
#define SUNXI_GPIO_F 5
#define SUNXI_GPIO_G 6
#define SUNXI_GPIO_H 7
#define SUNXI_GPIO_I 8
/*
* This defines the number of GPIO banks for the _main_ GPIO controller.
* You should fix up the padding in struct sunxi_gpio_reg below if you
* change this.
*/
#define SUNXI_GPIO_BANKS 9
/*
* sun6i/sun8i and later SoCs have an additional GPIO controller (R_PIO)
* at a different register offset.
*
* sun6i has 2 banks:
* PL0 - PL8 | PM0 - PM7
*
* sun8i has 1 bank:
* PL0 - PL11
*
* sun9i has 3 banks:
* PL0 - PL9 | PM0 - PM15 | PN0 - PN1
*/
#define SUNXI_GPIO_L 11
#define SUNXI_GPIO_M 12
#define SUNXI_GPIO_N 13
struct sunxi_gpio {
u32 cfg[4];
u32 dat;
u32 drv[2];
u32 pull[2];
};
/* gpio interrupt control */
struct sunxi_gpio_int {
u32 cfg[3];
u32 ctl;
u32 sta;
u32 deb; /* interrupt debounce */
};
struct sunxi_gpio_reg {
struct sunxi_gpio gpio_bank[SUNXI_GPIO_BANKS];
u8 res[0xbc];
struct sunxi_gpio_int gpio_int;
};
#define BANK_TO_GPIO(bank) (((bank) < SUNXI_GPIO_L) ? \
&((struct sunxi_gpio_reg *)SUNXI_PIO_BASE)->gpio_bank[bank] : \
&((struct sunxi_gpio_reg *)SUNXI_R_PIO_BASE)->gpio_bank[(bank) - SUNXI_GPIO_L])
#define GPIO_BANK(pin) ((pin) >> 5)
#define GPIO_NUM(pin) ((pin) & 0x1f)
#define GPIO_CFG_INDEX(pin) (((pin) & 0x1f) >> 3)
#define GPIO_CFG_OFFSET(pin) ((((pin) & 0x1f) & 0x7) << 2)
#define GPIO_DRV_INDEX(pin) (((pin) & 0x1f) >> 4)
#define GPIO_DRV_OFFSET(pin) ((((pin) & 0x1f) & 0xf) << 1)
#define GPIO_PULL_INDEX(pin) (((pin) & 0x1f) >> 4)
#define GPIO_PULL_OFFSET(pin) ((((pin) & 0x1f) & 0xf) << 1)
/* GPIO bank sizes */
#define SUNXI_GPIO_A_NR 32
#define SUNXI_GPIO_B_NR 32
#define SUNXI_GPIO_C_NR 32
#define SUNXI_GPIO_D_NR 32
#define SUNXI_GPIO_E_NR 32
#define SUNXI_GPIO_F_NR 32
#define SUNXI_GPIO_G_NR 32
#define SUNXI_GPIO_H_NR 32
#define SUNXI_GPIO_I_NR 32
#define SUNXI_GPIO_L_NR 32
#define SUNXI_GPIO_M_NR 32
#define SUNXI_GPIO_NEXT(__gpio) \
((__gpio##_START) + (__gpio##_NR) + 0)
enum sunxi_gpio_number {
SUNXI_GPIO_A_START = 0,
SUNXI_GPIO_B_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_A),
SUNXI_GPIO_C_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_B),
SUNXI_GPIO_D_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_C),
SUNXI_GPIO_E_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_D),
SUNXI_GPIO_F_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_E),
SUNXI_GPIO_G_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_F),
SUNXI_GPIO_H_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_G),
SUNXI_GPIO_I_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_H),
SUNXI_GPIO_L_START = 352,
SUNXI_GPIO_M_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_L),
SUNXI_GPIO_N_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_M),
SUNXI_GPIO_AXP0_START = 1024,
};
/* SUNXI GPIO number definitions */
#define SUNXI_GPA(_nr) (SUNXI_GPIO_A_START + (_nr))
#define SUNXI_GPB(_nr) (SUNXI_GPIO_B_START + (_nr))
#define SUNXI_GPC(_nr) (SUNXI_GPIO_C_START + (_nr))
#define SUNXI_GPD(_nr) (SUNXI_GPIO_D_START + (_nr))
#define SUNXI_GPE(_nr) (SUNXI_GPIO_E_START + (_nr))
#define SUNXI_GPF(_nr) (SUNXI_GPIO_F_START + (_nr))
#define SUNXI_GPG(_nr) (SUNXI_GPIO_G_START + (_nr))
#define SUNXI_GPH(_nr) (SUNXI_GPIO_H_START + (_nr))
#define SUNXI_GPI(_nr) (SUNXI_GPIO_I_START + (_nr))
#define SUNXI_GPL(_nr) (SUNXI_GPIO_L_START + (_nr))
#define SUNXI_GPM(_nr) (SUNXI_GPIO_M_START + (_nr))
#define SUNXI_GPN(_nr) (SUNXI_GPIO_N_START + (_nr))
#define SUNXI_GPAXP0(_nr) (SUNXI_GPIO_AXP0_START + (_nr))
/* GPIO pin function config */
#define SUNXI_GPIO_INPUT 0
#define SUNXI_GPIO_OUTPUT 1
#define SUNXI_GPIO_DISABLE 7
#define SUNXI_GPA_EMAC 2
#define SUN6I_GPA_GMAC 2
#define SUN7I_GPA_GMAC 5
#define SUN6I_GPA_SDC2 5
#define SUN6I_GPA_SDC3 4
#define SUN8I_H3_GPA_UART0 2
#define SUN4I_GPB_PWM 2
#define SUN4I_GPB_TWI0 2
#define SUN4I_GPB_TWI1 2
#define SUN5I_GPB_TWI1 2
#define SUN4I_GPB_TWI2 2
#define SUN5I_GPB_TWI2 2
#define SUN4I_GPB_UART0 2
#define SUN5I_GPB_UART0 2
#define SUN8I_GPB_UART2 2
#define SUN8I_A33_GPB_UART0 3
#define SUN8I_A83T_GPB_UART0 2
#define SUN8I_V3S_GPB_UART0 3
#define SUN50I_GPB_UART0 4
#define SUNXI_GPC_NAND 2
#define SUNXI_GPC_SPI0 3
#define SUNXI_GPC_SDC2 3
#define SUN6I_GPC_SDC3 4
#define SUN50I_GPC_SPI0 4
#define SUN8I_GPD_SDC1 3
#define SUNXI_GPD_LCD0 2
#define SUNXI_GPD_LVDS0 3
#define SUN5I_GPE_SDC2 3
#define SUN8I_GPE_TWI2 3
#define SUNXI_GPF_SDC0 2
#define SUNXI_GPF_UART0 4
#define SUN8I_GPF_UART0 3
#define SUN4I_GPG_SDC1 4
#define SUN5I_GPG_SDC1 2
#define SUN6I_GPG_SDC1 2
#define SUN8I_GPG_SDC1 2
#define SUN6I_GPG_TWI3 2
#define SUN5I_GPG_UART1 4
#define SUN6I_GPH_PWM 2
#define SUN8I_GPH_PWM 2
#define SUN4I_GPH_SDC1 5
#define SUN6I_GPH_TWI0 2
#define SUN8I_GPH_TWI0 2
#define SUN6I_GPH_TWI1 2
#define SUN8I_GPH_TWI1 2
#define SUN6I_GPH_TWI2 2
#define SUN6I_GPH_UART0 2
#define SUN9I_GPH_UART0 2
#define SUNXI_GPI_SDC3 2
#define SUN7I_GPI_TWI3 3
#define SUN7I_GPI_TWI4 3
#define SUN6I_GPL0_R_P2WI_SCK 3
#define SUN6I_GPL1_R_P2WI_SDA 3
#define SUN8I_GPL_R_RSB 2
#define SUN8I_H3_GPL_R_TWI 2
#define SUN8I_A23_GPL_R_TWI 3
#define SUN8I_GPL_R_UART 2
#define SUN9I_GPN_R_RSB 3
/* GPIO pin pull-up/down config */
#define SUNXI_GPIO_PULL_DISABLE 0
#define SUNXI_GPIO_PULL_UP 1
#define SUNXI_GPIO_PULL_DOWN 2
/* Virtual AXP0 GPIOs */
#define SUNXI_GPIO_AXP0_PREFIX "AXP0-"
#define SUNXI_GPIO_AXP0_VBUS_DETECT 4
#define SUNXI_GPIO_AXP0_VBUS_ENABLE 5
#define SUNXI_GPIO_AXP0_GPIO_COUNT 6
void sunxi_gpio_set_cfgbank(struct sunxi_gpio *pio, int bank_offset, u32 val);
void sunxi_gpio_set_cfgpin(u32 pin, u32 val);
int sunxi_gpio_get_cfgbank(struct sunxi_gpio *pio, int bank_offset);
int sunxi_gpio_get_cfgpin(u32 pin);
int sunxi_gpio_set_drv(u32 pin, u32 val);
int sunxi_gpio_set_pull(u32 pin, u32 val);
int sunxi_name_to_gpio_bank(const char *name);
int sunxi_name_to_gpio(const char *name);
#define name_to_gpio(name) sunxi_name_to_gpio(name)
#if !defined CONFIG_SPL_BUILD && defined CONFIG_AXP_GPIO
int axp_gpio_init(void);
#else
static inline int axp_gpio_init(void) { return 0; }
#endif
#endif /* _SUNXI_GPIO_H */