mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-11 07:34:31 +00:00
a09fea1d28
- In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: uboot-stm32@st-md-mailman.stormreply.com Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
115 lines
3.2 KiB
C
115 lines
3.2 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Copyright (C) 2014 Soeren Moch <smoch@web.de>
|
|
*
|
|
* Configuration settings for the TBS2910 MatrixARM board.
|
|
*/
|
|
|
|
#ifndef __TBS2910_CONFIG_H
|
|
#define __TBS2910_CONFIG_H
|
|
|
|
#include "mx6_common.h"
|
|
|
|
/* General configuration */
|
|
|
|
#define CONFIG_MACH_TYPE 3980
|
|
|
|
#define CONFIG_SYS_HZ 1000
|
|
|
|
#define CONFIG_IMX_THERMAL
|
|
|
|
/* Physical Memory Map */
|
|
#define CONFIG_SYS_SDRAM_BASE MMDC0_ARB_BASE_ADDR
|
|
|
|
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
|
|
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
|
|
#define CONFIG_SYS_INIT_SP_OFFSET \
|
|
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
|
#define CONFIG_SYS_INIT_SP_ADDR \
|
|
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
|
|
|
|
#define CONFIG_SYS_MALLOC_LEN (128 * 1024 * 1024)
|
|
|
|
#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
|
|
#define CONFIG_SYS_MEMTEST_END \
|
|
(CONFIG_SYS_MEMTEST_START + 500 * 1024 * 1024)
|
|
|
|
#define CONFIG_SYS_BOOTMAPSZ 0x10000000
|
|
|
|
/* Serial console */
|
|
#define CONFIG_MXC_UART
|
|
#define CONFIG_MXC_UART_BASE UART1_BASE /* select UART1/UART2 */
|
|
|
|
/* Framebuffer */
|
|
#ifdef CONFIG_VIDEO
|
|
#define CONFIG_VIDEO_BMP_RLE8
|
|
#define CONFIG_IMX_HDMI
|
|
#define CONFIG_IMX_VIDEO_SKIP
|
|
#endif
|
|
|
|
/* PCI */
|
|
#ifdef CONFIG_CMD_PCI
|
|
#define CONFIG_PCI_SCAN_SHOW
|
|
#define CONFIG_PCIE_IMX
|
|
#define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(7, 12)
|
|
#endif
|
|
|
|
/* SATA */
|
|
#ifdef CONFIG_CMD_SATA
|
|
#define CONFIG_SYS_SATA_MAX_DEVICE 1
|
|
#define CONFIG_DWC_AHSATA_PORT_ID 0
|
|
#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
|
|
#define CONFIG_LBA48
|
|
#define CONFIG_SYS_64BIT_LBA
|
|
#endif
|
|
|
|
/* USB */
|
|
#ifdef CONFIG_CMD_USB
|
|
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
|
|
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
|
|
#ifdef CONFIG_CMD_USB_MASS_STORAGE
|
|
#define CONFIG_USBD_HS
|
|
#endif /* CONFIG_CMD_USB_MASS_STORAGE */
|
|
#endif /* CONFIG_CMD_USB */
|
|
|
|
/* Environment organization */
|
|
#define CONFIG_SYS_MMC_ENV_DEV 2 /* overwritten on SD boot */
|
|
#define CONFIG_SYS_MMC_ENV_PART 1 /* overwritten on SD boot */
|
|
#define CONFIG_ENV_OVERWRITE
|
|
|
|
#define CONFIG_BOARD_SIZE_LIMIT 392192 /* (CONFIG_ENV_OFFSET - 1024) */
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"bootargs_mmc1=console=ttymxc0,115200 di0_primary console=tty1\0" \
|
|
"bootargs_mmc2=video=mxcfb0:dev=hdmi,1920x1080M@60 " \
|
|
"video=mxcfb1:off video=mxcfb2:off fbmem=28M\0" \
|
|
"bootargs_mmc3=root=/dev/mmcblk0p1 rootwait consoleblank=0 quiet\0" \
|
|
"bootargs_mmc=setenv bootargs ${bootargs_mmc1} ${bootargs_mmc2} " \
|
|
"${bootargs_mmc3}\0" \
|
|
"bootargs_upd=setenv bootargs console=ttymxc0,115200 " \
|
|
"rdinit=/sbin/init enable_wait_mode=off\0" \
|
|
"bootcmd_mmc=run bootargs_mmc; mmc dev 2; " \
|
|
"mmc read 0x10800000 0x800 0x4000; bootm 0x10800000\0" \
|
|
"bootcmd_up1=load mmc 1 0x10800000 uImage\0" \
|
|
"bootcmd_up2=load mmc 1 0x10d00000 uramdisk.img; " \
|
|
"run bootargs_upd; " \
|
|
"bootm 0x10800000 0x10d00000\0" \
|
|
"console=ttymxc0\0" \
|
|
"fan=gpio set 92\0" \
|
|
"set_con_serial=setenv stdout serial; " \
|
|
"setenv stderr serial\0" \
|
|
"set_con_hdmi=setenv stdout serial,vga; " \
|
|
"setenv stderr serial,vga\0" \
|
|
"stderr=serial,vga\0" \
|
|
"stdin=serial,usbkbd\0" \
|
|
"stdout=serial,vga\0"
|
|
|
|
#define CONFIG_BOOTCOMMAND \
|
|
"mmc rescan; " \
|
|
"if run bootcmd_up1; then " \
|
|
"run bootcmd_up2; " \
|
|
"else " \
|
|
"run bootcmd_mmc; " \
|
|
"fi"
|
|
|
|
#endif /* __TBS2910_CONFIG_H * */
|