mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-18 02:38:56 +00:00
c1853f6f73
The default setting for USB High Speed Squelch Threshold results in a threshold close to or lower than 100mV. This leads to Receive Compliance test failure for a 100mV threshold. Shift the threshold from ~100mV towards ~130mV by setting SQRXTUNE to 0x0 to pass USB High Speed Receiver Sensitivity Compliance test. Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Signed-off-by: Suresh Gupta <suresh.gupta@nxp.com> Signed-off-by: Ran Wang <ran.wang_1@nxp.com> [YS: Reordered Kconfig options] Reviewed-by: York Sun <york.sun@nxp.com>
448 lines
12 KiB
C
448 lines
12 KiB
C
/*
|
|
* Copyright 2014 Freescale Semiconductor, Inc.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#ifndef __ASM_ARCH_LS102XA_IMMAP_H_
|
|
#define __ASM_ARCH_LS102XA_IMMAP_H_
|
|
#include <fsl_immap.h>
|
|
|
|
#define SVR_MAJ(svr) (((svr) >> 4) & 0xf)
|
|
#define SVR_MIN(svr) (((svr) >> 0) & 0xf)
|
|
#define SVR_SOC_VER(svr) (((svr) >> 8) & 0x7ff)
|
|
#define IS_E_PROCESSOR(svr) (svr & 0x80000)
|
|
#define IS_SVR_REV(svr, maj, min) \
|
|
((SVR_MAJ(svr) == maj) && (SVR_MIN(svr) == min))
|
|
|
|
#define SOC_VER_SLS1020 0x00
|
|
#define SOC_VER_LS1020 0x10
|
|
#define SOC_VER_LS1021 0x11
|
|
#define SOC_VER_LS1022 0x12
|
|
|
|
#define SOC_MAJOR_VER_1_0 0x1
|
|
#define SOC_MAJOR_VER_2_0 0x2
|
|
|
|
#define CCSR_BRR_OFFSET 0xe4
|
|
#define CCSR_SCRATCHRW1_OFFSET 0x200
|
|
|
|
#define RCWSR0_SYS_PLL_RAT_SHIFT 25
|
|
#define RCWSR0_SYS_PLL_RAT_MASK 0x1f
|
|
#define RCWSR0_MEM_PLL_RAT_SHIFT 16
|
|
#define RCWSR0_MEM_PLL_RAT_MASK 0x3f
|
|
|
|
#define RCWSR4_SRDS1_PRTCL_SHIFT 24
|
|
#define RCWSR4_SRDS1_PRTCL_MASK 0xff000000
|
|
|
|
#define TIMER_COMP_VAL 0xffffffffffffffffull
|
|
#define ARCH_TIMER_CTRL_ENABLE (1 << 0)
|
|
#define SYS_COUNTER_CTRL_ENABLE (1 << 24)
|
|
|
|
#define DCFG_CCSR_PORSR1_RCW_MASK 0xff800000
|
|
#define DCFG_CCSR_PORSR1_RCW_SRC_I2C 0x24800000
|
|
|
|
#define DCFG_DCSR_PORCR1 0
|
|
|
|
/*
|
|
* Define default values for some CCSR macros to make header files cleaner
|
|
*
|
|
* To completely disable CCSR relocation in a board header file, define
|
|
* CONFIG_SYS_CCSR_DO_NOT_RELOCATE. This will force CONFIG_SYS_CCSRBAR_PHYS
|
|
* to a value that is the same as CONFIG_SYS_CCSRBAR.
|
|
*/
|
|
|
|
#ifdef CONFIG_SYS_CCSRBAR_PHYS
|
|
#error "Do not define CONFIG_SYS_CCSRBAR_PHYS directly."
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_CCSR_DO_NOT_RELOCATE
|
|
#undef CONFIG_SYS_CCSRBAR_PHYS_HIGH
|
|
#undef CONFIG_SYS_CCSRBAR_PHYS_LOW
|
|
#define CONFIG_SYS_CCSRBAR_PHYS_HIGH 0
|
|
#endif
|
|
|
|
#ifndef CONFIG_SYS_CCSRBAR
|
|
#define CONFIG_SYS_CCSRBAR CONFIG_SYS_IMMR
|
|
#endif
|
|
|
|
#ifndef CONFIG_SYS_CCSRBAR_PHYS_HIGH
|
|
#ifdef CONFIG_PHYS_64BIT
|
|
#define CONFIG_SYS_CCSRBAR_PHYS_HIGH 0xf
|
|
#else
|
|
#define CONFIG_SYS_CCSRBAR_PHYS_HIGH 0
|
|
#endif
|
|
#endif
|
|
|
|
#ifndef CONFIG_SYS_CCSRBAR_PHYS_LOW
|
|
#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_IMMR
|
|
#endif
|
|
|
|
#define CONFIG_SYS_CCSRBAR_PHYS ((CONFIG_SYS_CCSRBAR_PHYS_HIGH * 1ull) << 32 | \
|
|
CONFIG_SYS_CCSRBAR_PHYS_LOW)
|
|
|
|
struct sys_info {
|
|
unsigned long freq_processor[CONFIG_MAX_CPUS];
|
|
unsigned long freq_systembus;
|
|
unsigned long freq_ddrbus;
|
|
unsigned long freq_localbus;
|
|
};
|
|
|
|
/* Device Configuration and Pin Control */
|
|
struct ccsr_gur {
|
|
u32 porsr1; /* POR status 1 */
|
|
u32 porsr2; /* POR status 2 */
|
|
u8 res_008[0x20-0x8];
|
|
u32 gpporcr1; /* General-purpose POR configuration */
|
|
u32 gpporcr2;
|
|
u32 dcfg_fusesr; /* Fuse status register */
|
|
u8 res_02c[0x70-0x2c];
|
|
u32 devdisr; /* Device disable control */
|
|
u32 devdisr2; /* Device disable control 2 */
|
|
u32 devdisr3; /* Device disable control 3 */
|
|
u32 devdisr4; /* Device disable control 4 */
|
|
u32 devdisr5; /* Device disable control 5 */
|
|
u8 res_084[0x94-0x84];
|
|
u32 coredisru; /* uppper portion for support of 64 cores */
|
|
u32 coredisrl; /* lower portion for support of 64 cores */
|
|
u8 res_09c[0xa4-0x9c];
|
|
u32 svr; /* System version */
|
|
u8 res_0a8[0xb0-0xa8];
|
|
u32 rstcr; /* Reset control */
|
|
u32 rstrqpblsr; /* Reset request preboot loader status */
|
|
u8 res_0b8[0xc0-0xb8];
|
|
u32 rstrqmr1; /* Reset request mask */
|
|
u8 res_0c4[0xc8-0xc4];
|
|
u32 rstrqsr1; /* Reset request status */
|
|
u8 res_0cc[0xd4-0xcc];
|
|
u32 rstrqwdtmrl; /* Reset request WDT mask */
|
|
u8 res_0d8[0xdc-0xd8];
|
|
u32 rstrqwdtsrl; /* Reset request WDT status */
|
|
u8 res_0e0[0xe4-0xe0];
|
|
u32 brrl; /* Boot release */
|
|
u8 res_0e8[0x100-0xe8];
|
|
u32 rcwsr[16]; /* Reset control word status */
|
|
#define RCW_SB_EN_REG_INDEX 7
|
|
#define RCW_SB_EN_MASK 0x00200000
|
|
u8 res_140[0x200-0x140];
|
|
u32 scratchrw[4]; /* Scratch Read/Write */
|
|
u8 res_210[0x300-0x210];
|
|
u32 scratchw1r[4]; /* Scratch Read (Write once) */
|
|
u8 res_310[0x400-0x310];
|
|
u32 crstsr;
|
|
u8 res_404[0x550-0x404];
|
|
u32 sataliodnr;
|
|
u8 res_554[0x604-0x554];
|
|
u32 pamubypenr;
|
|
u32 dmacr1;
|
|
u8 res_60c[0x740-0x60c]; /* add more registers when needed */
|
|
u32 tp_ityp[64]; /* Topology Initiator Type Register */
|
|
struct {
|
|
u32 upper;
|
|
u32 lower;
|
|
} tp_cluster[1]; /* Core Cluster n Topology Register */
|
|
u8 res_848[0xe60-0x848];
|
|
u32 ddrclkdr;
|
|
u8 res_e60[0xe68-0xe64];
|
|
u32 ifcclkdr;
|
|
u8 res_e68[0xe80-0xe6c];
|
|
u32 sdhcpcr;
|
|
};
|
|
|
|
#define SCFG_ETSECDMAMCR_LE_BD_FR 0x00000c00
|
|
#define SCFG_SNPCNFGCR_SEC_RD_WR 0xc0000000
|
|
#define SCFG_ETSECCMCR_GE2_CLK125 0x04000000
|
|
#define SCFG_ETSECCMCR_GE0_CLK125 0x00000000
|
|
#define SCFG_ETSECCMCR_GE1_CLK125 0x08000000
|
|
#define SCFG_PIXCLKCR_PXCKEN 0x80000000
|
|
#define SCFG_QSPI_CLKSEL 0xc0100000
|
|
#define SCFG_SNPCNFGCR_SEC_RD_WR 0xc0000000
|
|
#define SCFG_SNPCNFGCR_DCU_RD_WR 0x03000000
|
|
#define SCFG_SNPCNFGCR_SATA_RD_WR 0x00c00000
|
|
#define SCFG_SNPCNFGCR_USB3_RD_WR 0x00300000
|
|
#define SCFG_SNPCNFGCR_DBG_RD_WR 0x000c0000
|
|
#define SCFG_SNPCNFGCR_EDMA_SNP 0x00020000
|
|
#define SCFG_ENDIANCR_LE 0x80000000
|
|
#define SCFG_DPSLPCR_WDRR_EN 0x00000001
|
|
#define SCFG_PMCINTECR_LPUART 0x40000000
|
|
#define SCFG_PMCINTECR_FTM 0x20000000
|
|
#define SCFG_PMCINTECR_GPIO 0x10000000
|
|
#define SCFG_PMCINTECR_IRQ0 0x08000000
|
|
#define SCFG_PMCINTECR_IRQ1 0x04000000
|
|
#define SCFG_PMCINTECR_ETSECRXG0 0x00800000
|
|
#define SCFG_PMCINTECR_ETSECRXG1 0x00400000
|
|
#define SCFG_PMCINTECR_ETSECERRG0 0x00080000
|
|
#define SCFG_PMCINTECR_ETSECERRG1 0x00040000
|
|
#define SCFG_CLUSTERPMCR_WFIL2EN 0x80000000
|
|
|
|
#define SCFG_BASE 0x01570000
|
|
#define SCFG_USB3PRM1CR 0x070
|
|
#define SCFG_USB_TXVREFTUNE 0x9
|
|
#define SCFG_USB_SQRXTUNE_MASK 0x7
|
|
|
|
/* Supplemental Configuration Unit */
|
|
struct ccsr_scfg {
|
|
u32 dpslpcr;
|
|
u32 resv0[2];
|
|
u32 etsecclkdpslpcr;
|
|
u32 resv1[5];
|
|
u32 fuseovrdcr;
|
|
u32 pixclkcr;
|
|
u32 resv2[5];
|
|
u32 spimsicr;
|
|
u32 resv3[6];
|
|
u32 pex1pmwrcr;
|
|
u32 pex1pmrdsr;
|
|
u32 resv4[3];
|
|
u32 usb3prm1cr;
|
|
u32 usb4prm2cr;
|
|
u32 pex1rdmsgpldlsbsr;
|
|
u32 pex1rdmsgpldmsbsr;
|
|
u32 pex2rdmsgpldlsbsr;
|
|
u32 pex2rdmsgpldmsbsr;
|
|
u32 pex1rdmmsgrqsr;
|
|
u32 pex2rdmmsgrqsr;
|
|
u32 spimsiclrcr;
|
|
u32 pexmscportsr[2];
|
|
u32 pex2pmwrcr;
|
|
u32 resv5[24];
|
|
u32 mac1_streamid;
|
|
u32 mac2_streamid;
|
|
u32 mac3_streamid;
|
|
u32 pex1_streamid;
|
|
u32 pex2_streamid;
|
|
u32 dma_streamid;
|
|
u32 sata_streamid;
|
|
u32 usb3_streamid;
|
|
u32 qe_streamid;
|
|
u32 sdhc_streamid;
|
|
u32 adma_streamid;
|
|
u32 letechsftrstcr;
|
|
u32 core0_sft_rst;
|
|
u32 core1_sft_rst;
|
|
u32 resv6[1];
|
|
u32 usb_hi_addr;
|
|
u32 etsecclkadjcr;
|
|
u32 sai_clk;
|
|
u32 resv7[1];
|
|
u32 dcu_streamid;
|
|
u32 usb2_streamid;
|
|
u32 ftm_reset;
|
|
u32 altcbar;
|
|
u32 qspi_cfg;
|
|
u32 pmcintecr;
|
|
u32 pmcintlecr;
|
|
u32 pmcintsr;
|
|
u32 qos1;
|
|
u32 qos2;
|
|
u32 qos3;
|
|
u32 cci_cfg;
|
|
u32 endiancr;
|
|
u32 etsecdmamcr;
|
|
u32 usb3prm3cr;
|
|
u32 resv9[1];
|
|
u32 debug_streamid;
|
|
u32 resv10[5];
|
|
u32 snpcnfgcr;
|
|
u32 hrstcr;
|
|
u32 intpcr;
|
|
u32 resv12[20];
|
|
u32 scfgrevcr;
|
|
u32 coresrencr;
|
|
u32 pex2pmrdsr;
|
|
u32 eddrtqcfg;
|
|
u32 ddrc2cr;
|
|
u32 ddrc3cr;
|
|
u32 ddrc4cr;
|
|
u32 ddrgcr;
|
|
u32 resv13[120];
|
|
u32 qeioclkcr;
|
|
u32 etsecmcr;
|
|
u32 sdhciovserlcr;
|
|
u32 resv14[61];
|
|
u32 sparecr[8];
|
|
u32 resv15[248];
|
|
u32 core0sftrstsr;
|
|
u32 clusterpmcr;
|
|
};
|
|
|
|
/* Clocking */
|
|
struct ccsr_clk {
|
|
struct {
|
|
u32 clkcncsr; /* core cluster n clock control status */
|
|
u8 res_004[0x1c];
|
|
} clkcsr[2];
|
|
u8 res_040[0x7c0]; /* 0x100 */
|
|
struct {
|
|
u32 pllcngsr;
|
|
u8 res_804[0x1c];
|
|
} pllcgsr[2];
|
|
u8 res_840[0x1c0];
|
|
u32 clkpcsr; /* 0xa00 Platform clock domain control/status */
|
|
u8 res_a04[0x1fc];
|
|
u32 pllpgsr; /* 0xc00 Platform PLL General Status */
|
|
u8 res_c04[0x1c];
|
|
u32 plldgsr; /* 0xc20 DDR PLL General Status */
|
|
u8 res_c24[0x3dc];
|
|
};
|
|
|
|
/* System Counter */
|
|
struct sctr_regs {
|
|
u32 cntcr;
|
|
u32 cntsr;
|
|
u32 cntcv1;
|
|
u32 cntcv2;
|
|
u32 resv1[4];
|
|
u32 cntfid0;
|
|
u32 cntfid1;
|
|
u32 resv2[1002];
|
|
u32 counterid[12];
|
|
};
|
|
|
|
#define MAX_SERDES 1
|
|
#define SRDS_MAX_LANES 4
|
|
#define SRDS_MAX_BANK 2
|
|
|
|
#define SRDS_RSTCTL_RST 0x80000000
|
|
#define SRDS_RSTCTL_RSTDONE 0x40000000
|
|
#define SRDS_RSTCTL_RSTERR 0x20000000
|
|
#define SRDS_RSTCTL_SWRST 0x10000000
|
|
#define SRDS_RSTCTL_SDEN 0x00000020
|
|
#define SRDS_RSTCTL_SDRST_B 0x00000040
|
|
#define SRDS_RSTCTL_PLLRST_B 0x00000080
|
|
#define SRDS_PLLCR0_POFF 0x80000000
|
|
#define SRDS_PLLCR0_RFCK_SEL_MASK 0x70000000
|
|
#define SRDS_PLLCR0_RFCK_SEL_100 0x00000000
|
|
#define SRDS_PLLCR0_RFCK_SEL_125 0x10000000
|
|
#define SRDS_PLLCR0_RFCK_SEL_156_25 0x20000000
|
|
#define SRDS_PLLCR0_RFCK_SEL_150 0x30000000
|
|
#define SRDS_PLLCR0_RFCK_SEL_161_13 0x40000000
|
|
#define SRDS_PLLCR0_RFCK_SEL_122_88 0x50000000
|
|
#define SRDS_PLLCR0_PLL_LCK 0x00800000
|
|
#define SRDS_PLLCR0_FRATE_SEL_MASK 0x000f0000
|
|
#define SRDS_PLLCR0_FRATE_SEL_5 0x00000000
|
|
#define SRDS_PLLCR0_FRATE_SEL_3_75 0x00050000
|
|
#define SRDS_PLLCR0_FRATE_SEL_5_15 0x00060000
|
|
#define SRDS_PLLCR0_FRATE_SEL_4 0x00070000
|
|
#define SRDS_PLLCR0_FRATE_SEL_3_12 0x00090000
|
|
#define SRDS_PLLCR0_FRATE_SEL_3 0x000a0000
|
|
#define SRDS_PLLCR1_PLL_BWSEL 0x08000000
|
|
|
|
struct ccsr_serdes {
|
|
struct {
|
|
u32 rstctl; /* Reset Control Register */
|
|
|
|
u32 pllcr0; /* PLL Control Register 0 */
|
|
|
|
u32 pllcr1; /* PLL Control Register 1 */
|
|
u32 res_0c; /* 0x00c */
|
|
u32 pllcr3;
|
|
u32 pllcr4;
|
|
u8 res_18[0x20-0x18];
|
|
} bank[2];
|
|
u8 res_40[0x90-0x40];
|
|
u32 srdstcalcr; /* 0x90 TX Calibration Control */
|
|
u8 res_94[0xa0-0x94];
|
|
u32 srdsrcalcr; /* 0xa0 RX Calibration Control */
|
|
u8 res_a4[0xb0-0xa4];
|
|
u32 srdsgr0; /* 0xb0 General Register 0 */
|
|
u8 res_b4[0xe0-0xb4];
|
|
u32 srdspccr0; /* 0xe0 Protocol Converter Config 0 */
|
|
u32 srdspccr1; /* 0xe4 Protocol Converter Config 1 */
|
|
u32 srdspccr2; /* 0xe8 Protocol Converter Config 2 */
|
|
u32 srdspccr3; /* 0xec Protocol Converter Config 3 */
|
|
u32 srdspccr4; /* 0xf0 Protocol Converter Config 4 */
|
|
u8 res_f4[0x100-0xf4];
|
|
struct {
|
|
u32 lnpssr; /* 0x100, 0x120, ..., 0x1e0 */
|
|
u8 res_104[0x120-0x104];
|
|
} srdslnpssr[4];
|
|
u8 res_180[0x300-0x180];
|
|
u32 srdspexeqcr;
|
|
u32 srdspexeqpcr[11];
|
|
u8 res_330[0x400-0x330];
|
|
u32 srdspexapcr;
|
|
u8 res_404[0x440-0x404];
|
|
u32 srdspexbpcr;
|
|
u8 res_444[0x800-0x444];
|
|
struct {
|
|
u32 gcr0; /* 0x800 General Control Register 0 */
|
|
u32 gcr1; /* 0x804 General Control Register 1 */
|
|
u32 gcr2; /* 0x808 General Control Register 2 */
|
|
u32 sscr0;
|
|
u32 recr0; /* 0x810 Receive Equalization Control */
|
|
u32 recr1;
|
|
u32 tecr0; /* 0x818 Transmit Equalization Control */
|
|
u32 sscr1;
|
|
u32 ttlcr0; /* 0x820 Transition Tracking Loop Ctrl 0 */
|
|
u8 res_824[0x83c-0x824];
|
|
u32 tcsr3;
|
|
} lane[4]; /* Lane A, B, C, D, E, F, G, H */
|
|
u8 res_a00[0x1000-0xa00]; /* from 0xa00 to 0xfff */
|
|
};
|
|
|
|
|
|
|
|
/* AHCI (sata) register map */
|
|
struct ccsr_ahci {
|
|
u32 res1[0xa4/4]; /* 0x0 - 0xa4 */
|
|
u32 pcfg; /* port config */
|
|
u32 ppcfg; /* port phy1 config */
|
|
u32 pp2c; /* port phy2 config */
|
|
u32 pp3c; /* port phy3 config */
|
|
u32 pp4c; /* port phy4 config */
|
|
u32 pp5c; /* port phy5 config */
|
|
u32 paxic; /* port AXI config */
|
|
u32 axicc; /* AXI cache control */
|
|
u32 axipc; /* AXI PROT control */
|
|
u32 ptc; /* port Trans Config */
|
|
u32 pts; /* port Trans Status */
|
|
u32 plc; /* port link config */
|
|
u32 plc1; /* port link config1 */
|
|
u32 plc2; /* port link config2 */
|
|
u32 pls; /* port link status */
|
|
u32 pls1; /* port link status1 */
|
|
u32 pcmdc; /* port CMD config */
|
|
u32 ppcs; /* port phy control status */
|
|
u32 pberr; /* port 0/1 BIST error */
|
|
u32 cmds; /* port 0/1 CMD status error */
|
|
};
|
|
|
|
#define RCPM_POWMGTCSR 0x130
|
|
#define RCPM_POWMGTCSR_SERDES_PW 0x80000000
|
|
#define RCPM_POWMGTCSR_LPM20_REQ 0x00100000
|
|
#define RCPM_POWMGTCSR_LPM20_ST 0x00000200
|
|
#define RCPM_POWMGTCSR_P_LPM20_ST 0x00000100
|
|
#define RCPM_IPPDEXPCR0 0x140
|
|
#define RCPM_IPPDEXPCR0_ETSEC 0x80000000
|
|
#define RCPM_IPPDEXPCR0_GPIO 0x00000040
|
|
#define RCPM_IPPDEXPCR1 0x144
|
|
#define RCPM_IPPDEXPCR1_LPUART 0x40000000
|
|
#define RCPM_IPPDEXPCR1_FLEXTIMER 0x20000000
|
|
#define RCPM_IPPDEXPCR1_OCRAM1 0x10000000
|
|
#define RCPM_NFIQOUTR 0x15c
|
|
#define RCPM_NIRQOUTR 0x16c
|
|
#define RCPM_DSIMSKR 0x18c
|
|
#define RCPM_CLPCL10SETR 0x1c4
|
|
#define RCPM_CLPCL10SETR_C0 0x00000001
|
|
|
|
struct ccsr_rcpm {
|
|
u8 rev1[0x4c];
|
|
u32 twaitsr;
|
|
u8 rev2[0xe0];
|
|
u32 powmgtcsr;
|
|
u8 rev3[0xc];
|
|
u32 ippdexpcr0;
|
|
u32 ippdexpcr1;
|
|
u8 rev4[0x14];
|
|
u32 nfiqoutr;
|
|
u8 rev5[0xc];
|
|
u32 nirqoutr;
|
|
u8 rev6[0x1c];
|
|
u32 dsimskr;
|
|
u8 rev7[0x34];
|
|
u32 clpcl10setr;
|
|
};
|
|
|
|
uint get_svr(void);
|
|
|
|
#endif /* __ASM_ARCH_LS102XA_IMMAP_H_ */
|