Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-11 15:37:23 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/drivers/gpio/qcom_pmic_gpio.c
Sumit Garg cf515842b9 gpio: qcom_pmic: Add support for GPIO LV/MV subtype 
GPIO LV (low voltage)/MV (medium voltage) subtypes have different
features and register mappings than 4CH/8CH subtypes. Add support
for LV and MV subtypes.

With GPIO LV/MV subtype available, add "qcom,pms405-gpio" compatible
which requires support for GPIO MV subtype.

Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
2022-08-26 10:55:46 -04:00

359 lines
9.2 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0+
/*
* Qualcomm generic pmic gpio driver
*
* (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
*/
#include <common.h>
#include <dm.h>
#include <log.h>
#include <power/pmic.h>
#include <spmi/spmi.h>
#include <asm/io.h>
#include <asm/gpio.h>
#include <linux/bitops.h>
/* Register offset for each gpio */
#define REG_OFFSET(x) ((x) * 0x100)
/* Register maps */
/* Type and subtype are shared for all PMIC peripherals */
#define REG_TYPE 0x4
#define REG_SUBTYPE 0x5
/* GPIO peripheral type and subtype out_values */
#define REG_TYPE_VAL 0x10
#define REG_SUBTYPE_GPIO_4CH 0x1
#define REG_SUBTYPE_GPIOC_4CH 0x5
#define REG_SUBTYPE_GPIO_8CH 0x9
#define REG_SUBTYPE_GPIOC_8CH 0xd
#define REG_SUBTYPE_GPIO_LV 0x10
#define REG_SUBTYPE_GPIO_MV 0x11
#define REG_STATUS 0x08
#define REG_STATUS_VAL_MASK 0x1
/* MODE_CTL */
#define REG_CTL 0x40
#define REG_CTL_MODE_MASK 0x70
#define REG_CTL_MODE_INPUT 0x00
#define REG_CTL_MODE_INOUT 0x20
#define REG_CTL_MODE_OUTPUT 0x10
#define REG_CTL_OUTPUT_MASK 0x0F
#define REG_CTL_LV_MV_MODE_MASK 0x3
#define REG_CTL_LV_MV_MODE_INPUT 0x0
#define REG_CTL_LV_MV_MODE_INOUT 0x2
#define REG_CTL_LV_MV_MODE_OUTPUT 0x1
#define REG_DIG_VIN_CTL 0x41
#define REG_DIG_VIN_VIN0 0
#define REG_DIG_PULL_CTL 0x42
#define REG_DIG_PULL_NO_PU 0x5
#define REG_LV_MV_OUTPUT_CTL 0x44
#define REG_LV_MV_OUTPUT_CTL_MASK 0x80
#define REG_LV_MV_OUTPUT_CTL_SHIFT 7
#define REG_DIG_OUT_CTL 0x45
#define REG_DIG_OUT_CTL_CMOS (0x0 << 4)
#define REG_DIG_OUT_CTL_DRIVE_L 0x1
#define REG_EN_CTL 0x46
#define REG_EN_CTL_ENABLE (1 << 7)
struct qcom_gpio_bank {
uint32_t pid; /* Peripheral ID on SPMI bus */
bool lv_mv_type; /* If subtype is GPIO_LV(0x10) or GPIO_MV(0x11) */
};
static int qcom_gpio_set_direction(struct udevice *dev, unsigned offset,
bool input, int value)
{
struct qcom_gpio_bank *priv = dev_get_priv(dev);
uint32_t gpio_base = priv->pid + REG_OFFSET(offset);
uint32_t reg_ctl_val;
int ret;
/* Disable the GPIO */
ret = pmic_clrsetbits(dev->parent, gpio_base + REG_EN_CTL,
REG_EN_CTL_ENABLE, 0);
if (ret < 0)
return ret;
/* Select the mode and output */
if (priv->lv_mv_type) {
if (input)
reg_ctl_val = REG_CTL_LV_MV_MODE_INPUT;
else
reg_ctl_val = REG_CTL_LV_MV_MODE_INOUT;
} else {
if (input)
reg_ctl_val = REG_CTL_MODE_INPUT;
else
reg_ctl_val = REG_CTL_MODE_INOUT | !!value;
}
ret = pmic_reg_write(dev->parent, gpio_base + REG_CTL, reg_ctl_val);
if (ret < 0)
return ret;
if (priv->lv_mv_type && !input) {
ret = pmic_reg_write(dev->parent,
gpio_base + REG_LV_MV_OUTPUT_CTL,
!!value << REG_LV_MV_OUTPUT_CTL_SHIFT);
if (ret < 0)
return ret;
}
/* Set the right pull (no pull) */
ret = pmic_reg_write(dev->parent, gpio_base + REG_DIG_PULL_CTL,
REG_DIG_PULL_NO_PU);
if (ret < 0)
return ret;
/* Configure output pin drivers if needed */
if (!input) {
/* Select the VIN - VIN0, pin is input so it doesn't matter */
ret = pmic_reg_write(dev->parent, gpio_base + REG_DIG_VIN_CTL,
REG_DIG_VIN_VIN0);
if (ret < 0)
return ret;
/* Set the right dig out control */
ret = pmic_reg_write(dev->parent, gpio_base + REG_DIG_OUT_CTL,
REG_DIG_OUT_CTL_CMOS |
REG_DIG_OUT_CTL_DRIVE_L);
if (ret < 0)
return ret;
}
/* Enable the GPIO */
return pmic_clrsetbits(dev->parent, gpio_base + REG_EN_CTL, 0,
REG_EN_CTL_ENABLE);
}
static int qcom_gpio_direction_input(struct udevice *dev, unsigned offset)
{
return qcom_gpio_set_direction(dev, offset, true, 0);
}
static int qcom_gpio_direction_output(struct udevice *dev, unsigned offset,
int value)
{
return qcom_gpio_set_direction(dev, offset, false, value);
}
static int qcom_gpio_get_function(struct udevice *dev, unsigned offset)
{
struct qcom_gpio_bank *priv = dev_get_priv(dev);
uint32_t gpio_base = priv->pid + REG_OFFSET(offset);
int reg;
reg = pmic_reg_read(dev->parent, gpio_base + REG_CTL);
if (reg < 0)
return reg;
if (priv->lv_mv_type) {
switch (reg & REG_CTL_LV_MV_MODE_MASK) {
case REG_CTL_LV_MV_MODE_INPUT:
return GPIOF_INPUT;
case REG_CTL_LV_MV_MODE_INOUT: /* Fallthrough */
case REG_CTL_LV_MV_MODE_OUTPUT:
return GPIOF_OUTPUT;
default:
return GPIOF_UNKNOWN;
}
} else {
switch (reg & REG_CTL_MODE_MASK) {
case REG_CTL_MODE_INPUT:
return GPIOF_INPUT;
case REG_CTL_MODE_INOUT: /* Fallthrough */
case REG_CTL_MODE_OUTPUT:
return GPIOF_OUTPUT;
default:
return GPIOF_UNKNOWN;
}
}
}
static int qcom_gpio_get_value(struct udevice *dev, unsigned offset)
{
struct qcom_gpio_bank *priv = dev_get_priv(dev);
uint32_t gpio_base = priv->pid + REG_OFFSET(offset);
int reg;
reg = pmic_reg_read(dev->parent, gpio_base + REG_STATUS);
if (reg < 0)
return reg;
return !!(reg & REG_STATUS_VAL_MASK);
}
static int qcom_gpio_set_value(struct udevice *dev, unsigned offset,
int value)
{
struct qcom_gpio_bank *priv = dev_get_priv(dev);
uint32_t gpio_base = priv->pid + REG_OFFSET(offset);
/* Set the output value of the gpio */
if (priv->lv_mv_type)
return pmic_clrsetbits(dev->parent,
gpio_base + REG_LV_MV_OUTPUT_CTL,
REG_LV_MV_OUTPUT_CTL_MASK,
!!value << REG_LV_MV_OUTPUT_CTL_SHIFT);
else
return pmic_clrsetbits(dev->parent, gpio_base + REG_CTL,
REG_CTL_OUTPUT_MASK, !!value);
}
static const struct dm_gpio_ops qcom_gpio_ops = {
.direction_input = qcom_gpio_direction_input,
.direction_output = qcom_gpio_direction_output,
.get_value = qcom_gpio_get_value,
.set_value = qcom_gpio_set_value,
.get_function = qcom_gpio_get_function,
};
static int qcom_gpio_probe(struct udevice *dev)
{
struct qcom_gpio_bank *priv = dev_get_priv(dev);
int reg;
priv->pid = dev_read_addr(dev);
if (priv->pid == FDT_ADDR_T_NONE)
return log_msg_ret("bad address", -EINVAL);
/* Do a sanity check */
reg = pmic_reg_read(dev->parent, priv->pid + REG_TYPE);
if (reg != REG_TYPE_VAL)
return log_msg_ret("bad type", -ENXIO);
reg = pmic_reg_read(dev->parent, priv->pid + REG_SUBTYPE);
if (reg != REG_SUBTYPE_GPIO_4CH && reg != REG_SUBTYPE_GPIOC_4CH &&
reg != REG_SUBTYPE_GPIO_LV && reg != REG_SUBTYPE_GPIO_MV)
return log_msg_ret("bad subtype", -ENXIO);
priv->lv_mv_type = reg == REG_SUBTYPE_GPIO_LV ||
reg == REG_SUBTYPE_GPIO_MV;
return 0;
}
static int qcom_gpio_of_to_plat(struct udevice *dev)
{
struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
uc_priv->gpio_count = dev_read_u32_default(dev, "gpio-count", 0);
uc_priv->bank_name = dev_read_string(dev, "gpio-bank-name");
if (uc_priv->bank_name == NULL)
uc_priv->bank_name = "qcom_pmic";
return 0;
}
static const struct udevice_id qcom_gpio_ids[] = {
{ .compatible = "qcom,pm8916-gpio" },
{ .compatible = "qcom,pm8994-gpio" }, /* 22 GPIO's */
{ .compatible = "qcom,pm8998-gpio" },
{ .compatible = "qcom,pms405-gpio" },
{ }
};
U_BOOT_DRIVER(qcom_pmic_gpio) = {
.name = "qcom_pmic_gpio",
.id = UCLASS_GPIO,
.of_match = qcom_gpio_ids,
.of_to_plat = qcom_gpio_of_to_plat,
.probe = qcom_gpio_probe,
.ops = &qcom_gpio_ops,
.priv_auto = sizeof(struct qcom_gpio_bank),
};
/* Add pmic buttons as GPIO as well - there is no generic way for now */
#define PON_INT_RT_STS 0x10
#define KPDPWR_ON_INT_BIT 0
#define RESIN_ON_INT_BIT 1
static int qcom_pwrkey_get_function(struct udevice *dev, unsigned offset)
{
return GPIOF_INPUT;
}
static int qcom_pwrkey_get_value(struct udevice *dev, unsigned offset)
{
struct qcom_gpio_bank *priv = dev_get_priv(dev);
int reg = pmic_reg_read(dev->parent, priv->pid + PON_INT_RT_STS);
if (reg < 0)
return 0;
switch (offset) {
case 0: /* Power button */
return (reg & BIT(KPDPWR_ON_INT_BIT)) != 0;
break;
case 1: /* Reset button */
default:
return (reg & BIT(RESIN_ON_INT_BIT)) != 0;
break;
}
}
static const struct dm_gpio_ops qcom_pwrkey_ops = {
.get_value = qcom_pwrkey_get_value,
.get_function = qcom_pwrkey_get_function,
};
static int qcom_pwrkey_probe(struct udevice *dev)
{
struct qcom_gpio_bank *priv = dev_get_priv(dev);
int reg;
priv->pid = dev_read_addr(dev);
if (priv->pid == FDT_ADDR_T_NONE)
return log_msg_ret("bad address", -EINVAL);
/* Do a sanity check */
reg = pmic_reg_read(dev->parent, priv->pid + REG_TYPE);
if (reg != 0x1)
return log_msg_ret("bad type", -ENXIO);
reg = pmic_reg_read(dev->parent, priv->pid + REG_SUBTYPE);
if ((reg & 0x5) == 0)
return log_msg_ret("bad subtype", -ENXIO);
return 0;
}
static int qcom_pwrkey_of_to_plat(struct udevice *dev)
{
struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
uc_priv->gpio_count = 2;
uc_priv->bank_name = dev_read_string(dev, "gpio-bank-name");
if (uc_priv->bank_name == NULL)
uc_priv->bank_name = "pwkey_qcom";
return 0;
}
static const struct udevice_id qcom_pwrkey_ids[] = {
{ .compatible = "qcom,pm8916-pwrkey" },
{ .compatible = "qcom,pm8994-pwrkey" },
{ .compatible = "qcom,pm8998-pwrkey" },
{ }
};
U_BOOT_DRIVER(pwrkey_qcom) = {
.name = "pwrkey_qcom",
.id = UCLASS_GPIO,
.of_match = qcom_pwrkey_ids,
.of_to_plat = qcom_pwrkey_of_to_plat,
.probe = qcom_pwrkey_probe,
.ops = &qcom_pwrkey_ops,
.priv_auto = sizeof(struct qcom_gpio_bank),
};
Reference in a new issue View git blame Copy permalink