mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-29 16:10:58 +00:00
697037fe9b
Fix a MPC5xxx I2C timing issue in i2c_probe(). * Patch by Leif Lindholm, 27 May 2004: Fix board_init_f() for dbau1x00 board. |
||
|---|---|---|
| .. | ||
| config.mk | ||
| dbau1x00.c | ||
| flash.c | ||
| Makefile | ||
| memsetup.S | ||
| README | ||
| u-boot.lds | ||
By Thomas.Lange@corelatus.se 2003-10-06 ---------------------------------------- DbAu1000 is a development board from AMD containing an Alchemy AU1000 with mips32 core. Limitations & comments ---------------------- I assume that you set board to BIG endian! Little endian not tested, most probably broken. I named the board dbau1x00, to allow support for all three development boards some day ( dbau1000, dbau1100 and dbau1500 ). I only have a dbau1000, so all testing is limited to this board! The board has two different flash banks, that can be selected via dip switch. This makes it possible to test new bootloaders without thrashing the YAMON boot loader deliviered with board. Ethernet only supported for mac0. Pcmcia only supported for slot 0, only 3.3V. Pcmcia IDE tested with Sandisk Compact Flash and IBM microdrive. ################################### ######## NOTE!!!!!! ######### ################################### If you partition a disk on another system (e.g. laptop), all bytes will be swapped on 16bit level when using PCMCIA!!!! This is probably due to an error in Au1000 chip. Solution: a) Boot via network and partition disk directly from dbau1x00. The endian will then be correct. b) Partition disk on "laptop" and fill it with all files you need. Then write a simple program that endian swaps whole disk, Example: Original "laptop" byte order: B0 B1 B2 B3 B4 B5 B6 B7 B8 B9... Dbau1000 byte order will then be: B1 B0 B3 B2 B5 B4 B7 B6 B9 B8...