mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-19 03:08:31 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
469 lines
12 KiB
C
469 lines
12 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2001
|
|
* Gerald Van Baren, Custom IDEAS, vanbaren@cideas.com
|
|
*/
|
|
|
|
/*
|
|
* MII Utilities
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <miiphy.h>
|
|
|
|
typedef struct _MII_reg_desc_t {
|
|
ushort regno;
|
|
char * name;
|
|
} MII_reg_desc_t;
|
|
|
|
static const MII_reg_desc_t reg_0_5_desc_tbl[] = {
|
|
{ MII_BMCR, "PHY control register" },
|
|
{ MII_BMSR, "PHY status register" },
|
|
{ MII_PHYSID1, "PHY ID 1 register" },
|
|
{ MII_PHYSID2, "PHY ID 2 register" },
|
|
{ MII_ADVERTISE, "Autonegotiation advertisement register" },
|
|
{ MII_LPA, "Autonegotiation partner abilities register" },
|
|
};
|
|
|
|
typedef struct _MII_field_desc_t {
|
|
ushort hi;
|
|
ushort lo;
|
|
ushort mask;
|
|
char * name;
|
|
} MII_field_desc_t;
|
|
|
|
static const MII_field_desc_t reg_0_desc_tbl[] = {
|
|
{ 15, 15, 0x01, "reset" },
|
|
{ 14, 14, 0x01, "loopback" },
|
|
{ 13, 6, 0x81, "speed selection" }, /* special */
|
|
{ 12, 12, 0x01, "A/N enable" },
|
|
{ 11, 11, 0x01, "power-down" },
|
|
{ 10, 10, 0x01, "isolate" },
|
|
{ 9, 9, 0x01, "restart A/N" },
|
|
{ 8, 8, 0x01, "duplex" }, /* special */
|
|
{ 7, 7, 0x01, "collision test enable" },
|
|
{ 5, 0, 0x3f, "(reserved)" }
|
|
};
|
|
|
|
static const MII_field_desc_t reg_1_desc_tbl[] = {
|
|
{ 15, 15, 0x01, "100BASE-T4 able" },
|
|
{ 14, 14, 0x01, "100BASE-X full duplex able" },
|
|
{ 13, 13, 0x01, "100BASE-X half duplex able" },
|
|
{ 12, 12, 0x01, "10 Mbps full duplex able" },
|
|
{ 11, 11, 0x01, "10 Mbps half duplex able" },
|
|
{ 10, 10, 0x01, "100BASE-T2 full duplex able" },
|
|
{ 9, 9, 0x01, "100BASE-T2 half duplex able" },
|
|
{ 8, 8, 0x01, "extended status" },
|
|
{ 7, 7, 0x01, "(reserved)" },
|
|
{ 6, 6, 0x01, "MF preamble suppression" },
|
|
{ 5, 5, 0x01, "A/N complete" },
|
|
{ 4, 4, 0x01, "remote fault" },
|
|
{ 3, 3, 0x01, "A/N able" },
|
|
{ 2, 2, 0x01, "link status" },
|
|
{ 1, 1, 0x01, "jabber detect" },
|
|
{ 0, 0, 0x01, "extended capabilities" },
|
|
};
|
|
|
|
static const MII_field_desc_t reg_2_desc_tbl[] = {
|
|
{ 15, 0, 0xffff, "OUI portion" },
|
|
};
|
|
|
|
static const MII_field_desc_t reg_3_desc_tbl[] = {
|
|
{ 15, 10, 0x3f, "OUI portion" },
|
|
{ 9, 4, 0x3f, "manufacturer part number" },
|
|
{ 3, 0, 0x0f, "manufacturer rev. number" },
|
|
};
|
|
|
|
static const MII_field_desc_t reg_4_desc_tbl[] = {
|
|
{ 15, 15, 0x01, "next page able" },
|
|
{ 14, 14, 0x01, "(reserved)" },
|
|
{ 13, 13, 0x01, "remote fault" },
|
|
{ 12, 12, 0x01, "(reserved)" },
|
|
{ 11, 11, 0x01, "asymmetric pause" },
|
|
{ 10, 10, 0x01, "pause enable" },
|
|
{ 9, 9, 0x01, "100BASE-T4 able" },
|
|
{ 8, 8, 0x01, "100BASE-TX full duplex able" },
|
|
{ 7, 7, 0x01, "100BASE-TX able" },
|
|
{ 6, 6, 0x01, "10BASE-T full duplex able" },
|
|
{ 5, 5, 0x01, "10BASE-T able" },
|
|
{ 4, 0, 0x1f, "xxx to do" },
|
|
};
|
|
|
|
static const MII_field_desc_t reg_5_desc_tbl[] = {
|
|
{ 15, 15, 0x01, "next page able" },
|
|
{ 14, 14, 0x01, "acknowledge" },
|
|
{ 13, 13, 0x01, "remote fault" },
|
|
{ 12, 12, 0x01, "(reserved)" },
|
|
{ 11, 11, 0x01, "asymmetric pause able" },
|
|
{ 10, 10, 0x01, "pause able" },
|
|
{ 9, 9, 0x01, "100BASE-T4 able" },
|
|
{ 8, 8, 0x01, "100BASE-X full duplex able" },
|
|
{ 7, 7, 0x01, "100BASE-TX able" },
|
|
{ 6, 6, 0x01, "10BASE-T full duplex able" },
|
|
{ 5, 5, 0x01, "10BASE-T able" },
|
|
{ 4, 0, 0x1f, "xxx to do" },
|
|
};
|
|
typedef struct _MII_field_desc_and_len_t {
|
|
const MII_field_desc_t *pdesc;
|
|
ushort len;
|
|
} MII_field_desc_and_len_t;
|
|
|
|
static const MII_field_desc_and_len_t desc_and_len_tbl[] = {
|
|
{ reg_0_desc_tbl, ARRAY_SIZE(reg_0_desc_tbl) },
|
|
{ reg_1_desc_tbl, ARRAY_SIZE(reg_1_desc_tbl) },
|
|
{ reg_2_desc_tbl, ARRAY_SIZE(reg_2_desc_tbl) },
|
|
{ reg_3_desc_tbl, ARRAY_SIZE(reg_3_desc_tbl) },
|
|
{ reg_4_desc_tbl, ARRAY_SIZE(reg_4_desc_tbl) },
|
|
{ reg_5_desc_tbl, ARRAY_SIZE(reg_5_desc_tbl) },
|
|
};
|
|
|
|
static void dump_reg(
|
|
ushort regval,
|
|
const MII_reg_desc_t *prd,
|
|
const MII_field_desc_and_len_t *pdl);
|
|
|
|
static int special_field(
|
|
ushort regno,
|
|
const MII_field_desc_t *pdesc,
|
|
ushort regval);
|
|
|
|
static void MII_dump_0_to_5(
|
|
ushort regvals[6],
|
|
uchar reglo,
|
|
uchar reghi)
|
|
{
|
|
ulong i;
|
|
|
|
for (i = 0; i < 6; i++) {
|
|
if ((reglo <= i) && (i <= reghi))
|
|
dump_reg(regvals[i], ®_0_5_desc_tbl[i],
|
|
&desc_and_len_tbl[i]);
|
|
}
|
|
}
|
|
|
|
static void dump_reg(
|
|
ushort regval,
|
|
const MII_reg_desc_t *prd,
|
|
const MII_field_desc_and_len_t *pdl)
|
|
{
|
|
ulong i;
|
|
ushort mask_in_place;
|
|
const MII_field_desc_t *pdesc;
|
|
|
|
printf("%u. (%04hx) -- %s --\n",
|
|
prd->regno, regval, prd->name);
|
|
|
|
for (i = 0; i < pdl->len; i++) {
|
|
pdesc = &pdl->pdesc[i];
|
|
|
|
mask_in_place = pdesc->mask << pdesc->lo;
|
|
|
|
printf(" (%04hx:%04x) %u.",
|
|
mask_in_place,
|
|
regval & mask_in_place,
|
|
prd->regno);
|
|
|
|
if (special_field(prd->regno, pdesc, regval)) {
|
|
}
|
|
else {
|
|
if (pdesc->hi == pdesc->lo)
|
|
printf("%2u ", pdesc->lo);
|
|
else
|
|
printf("%2u-%2u", pdesc->hi, pdesc->lo);
|
|
printf(" = %5u %s",
|
|
(regval & mask_in_place) >> pdesc->lo,
|
|
pdesc->name);
|
|
}
|
|
printf("\n");
|
|
|
|
}
|
|
printf("\n");
|
|
}
|
|
|
|
/* Special fields:
|
|
** 0.6,13
|
|
** 0.8
|
|
** 2.15-0
|
|
** 3.15-0
|
|
** 4.4-0
|
|
** 5.4-0
|
|
*/
|
|
|
|
static int special_field(
|
|
ushort regno,
|
|
const MII_field_desc_t *pdesc,
|
|
ushort regval)
|
|
{
|
|
if ((regno == MII_BMCR) && (pdesc->lo == 6)) {
|
|
ushort speed_bits = regval & (BMCR_SPEED1000 | BMCR_SPEED100);
|
|
printf("%2u,%2u = b%u%u speed selection = %s Mbps",
|
|
6, 13,
|
|
(regval >> 6) & 1,
|
|
(regval >> 13) & 1,
|
|
speed_bits == BMCR_SPEED1000 ? "1000" :
|
|
speed_bits == BMCR_SPEED100 ? "100" :
|
|
"10");
|
|
return 1;
|
|
}
|
|
|
|
else if ((regno == MII_BMCR) && (pdesc->lo == 8)) {
|
|
printf("%2u = %5u duplex = %s",
|
|
pdesc->lo,
|
|
(regval >> pdesc->lo) & 1,
|
|
((regval >> pdesc->lo) & 1) ? "full" : "half");
|
|
return 1;
|
|
}
|
|
|
|
else if ((regno == MII_ADVERTISE) && (pdesc->lo == 0)) {
|
|
ushort sel_bits = (regval >> pdesc->lo) & pdesc->mask;
|
|
printf("%2u-%2u = %5u selector = %s",
|
|
pdesc->hi, pdesc->lo, sel_bits,
|
|
sel_bits == PHY_ANLPAR_PSB_802_3 ?
|
|
"IEEE 802.3" :
|
|
sel_bits == PHY_ANLPAR_PSB_802_9 ?
|
|
"IEEE 802.9 ISLAN-16T" :
|
|
"???");
|
|
return 1;
|
|
}
|
|
|
|
else if ((regno == MII_LPA) && (pdesc->lo == 0)) {
|
|
ushort sel_bits = (regval >> pdesc->lo) & pdesc->mask;
|
|
printf("%2u-%2u = %u selector = %s",
|
|
pdesc->hi, pdesc->lo, sel_bits,
|
|
sel_bits == PHY_ANLPAR_PSB_802_3 ?
|
|
"IEEE 802.3" :
|
|
sel_bits == PHY_ANLPAR_PSB_802_9 ?
|
|
"IEEE 802.9 ISLAN-16T" :
|
|
"???");
|
|
return 1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static char last_op[2];
|
|
static uint last_data;
|
|
static uint last_addr_lo;
|
|
static uint last_addr_hi;
|
|
static uint last_reg_lo;
|
|
static uint last_reg_hi;
|
|
static uint last_mask;
|
|
|
|
static void extract_range(
|
|
char * input,
|
|
unsigned char * plo,
|
|
unsigned char * phi)
|
|
{
|
|
char * end;
|
|
*plo = simple_strtoul(input, &end, 16);
|
|
if (*end == '-') {
|
|
end++;
|
|
*phi = simple_strtoul(end, NULL, 16);
|
|
}
|
|
else {
|
|
*phi = *plo;
|
|
}
|
|
}
|
|
|
|
/* ---------------------------------------------------------------- */
|
|
static int do_mii(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
|
{
|
|
char op[2];
|
|
unsigned char addrlo, addrhi, reglo, reghi;
|
|
unsigned char addr, reg;
|
|
unsigned short data, mask;
|
|
int rcode = 0;
|
|
const char *devname;
|
|
|
|
if (argc < 2)
|
|
return CMD_RET_USAGE;
|
|
|
|
#if defined(CONFIG_MII_INIT)
|
|
mii_init ();
|
|
#endif
|
|
|
|
/*
|
|
* We use the last specified parameters, unless new ones are
|
|
* entered.
|
|
*/
|
|
op[0] = last_op[0];
|
|
op[1] = last_op[1];
|
|
addrlo = last_addr_lo;
|
|
addrhi = last_addr_hi;
|
|
reglo = last_reg_lo;
|
|
reghi = last_reg_hi;
|
|
data = last_data;
|
|
mask = last_mask;
|
|
|
|
if ((flag & CMD_FLAG_REPEAT) == 0) {
|
|
op[0] = argv[1][0];
|
|
if (strlen(argv[1]) > 1)
|
|
op[1] = argv[1][1];
|
|
else
|
|
op[1] = '\0';
|
|
|
|
if (argc >= 3)
|
|
extract_range(argv[2], &addrlo, &addrhi);
|
|
if (argc >= 4)
|
|
extract_range(argv[3], ®lo, ®hi);
|
|
if (argc >= 5)
|
|
data = simple_strtoul(argv[4], NULL, 16);
|
|
if (argc >= 6)
|
|
mask = simple_strtoul(argv[5], NULL, 16);
|
|
}
|
|
|
|
if (addrhi > 31) {
|
|
printf("Incorrect PHY address. Range should be 0-31\n");
|
|
return CMD_RET_USAGE;
|
|
}
|
|
|
|
/* use current device */
|
|
devname = miiphy_get_current_dev();
|
|
|
|
/*
|
|
* check info/read/write.
|
|
*/
|
|
if (op[0] == 'i') {
|
|
unsigned char j, start, end;
|
|
unsigned int oui;
|
|
unsigned char model;
|
|
unsigned char rev;
|
|
|
|
/*
|
|
* Look for any and all PHYs. Valid addresses are 0..31.
|
|
*/
|
|
if (argc >= 3) {
|
|
start = addrlo; end = addrhi;
|
|
} else {
|
|
start = 0; end = 31;
|
|
}
|
|
|
|
for (j = start; j <= end; j++) {
|
|
if (miiphy_info (devname, j, &oui, &model, &rev) == 0) {
|
|
printf("PHY 0x%02X: "
|
|
"OUI = 0x%04X, "
|
|
"Model = 0x%02X, "
|
|
"Rev = 0x%02X, "
|
|
"%3dbase%s, %s\n",
|
|
j, oui, model, rev,
|
|
miiphy_speed (devname, j),
|
|
miiphy_is_1000base_x (devname, j)
|
|
? "X" : "T",
|
|
(miiphy_duplex (devname, j) == FULL)
|
|
? "FDX" : "HDX");
|
|
}
|
|
}
|
|
} else if (op[0] == 'r') {
|
|
for (addr = addrlo; addr <= addrhi; addr++) {
|
|
for (reg = reglo; reg <= reghi; reg++) {
|
|
data = 0xffff;
|
|
if (miiphy_read (devname, addr, reg, &data) != 0) {
|
|
printf(
|
|
"Error reading from the PHY addr=%02x reg=%02x\n",
|
|
addr, reg);
|
|
rcode = 1;
|
|
} else {
|
|
if ((addrlo != addrhi) || (reglo != reghi))
|
|
printf("addr=%02x reg=%02x data=",
|
|
(uint)addr, (uint)reg);
|
|
printf("%04X\n", data & 0x0000FFFF);
|
|
}
|
|
}
|
|
if ((addrlo != addrhi) && (reglo != reghi))
|
|
printf("\n");
|
|
}
|
|
} else if (op[0] == 'w') {
|
|
for (addr = addrlo; addr <= addrhi; addr++) {
|
|
for (reg = reglo; reg <= reghi; reg++) {
|
|
if (miiphy_write (devname, addr, reg, data) != 0) {
|
|
printf("Error writing to the PHY addr=%02x reg=%02x\n",
|
|
addr, reg);
|
|
rcode = 1;
|
|
}
|
|
}
|
|
}
|
|
} else if (op[0] == 'm') {
|
|
for (addr = addrlo; addr <= addrhi; addr++) {
|
|
for (reg = reglo; reg <= reghi; reg++) {
|
|
unsigned short val = 0;
|
|
if (miiphy_read(devname, addr,
|
|
reg, &val)) {
|
|
printf("Error reading from the PHY");
|
|
printf(" addr=%02x", addr);
|
|
printf(" reg=%02x\n", reg);
|
|
rcode = 1;
|
|
} else {
|
|
val = (val & ~mask) | (data & mask);
|
|
if (miiphy_write(devname, addr,
|
|
reg, val)) {
|
|
printf("Error writing to the PHY");
|
|
printf(" addr=%02x", addr);
|
|
printf(" reg=%02x\n", reg);
|
|
rcode = 1;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
} else if (strncmp(op, "du", 2) == 0) {
|
|
ushort regs[6];
|
|
int ok = 1;
|
|
if ((reglo > 5) || (reghi > 5)) {
|
|
printf(
|
|
"The MII dump command only formats the "
|
|
"standard MII registers, 0-5.\n");
|
|
return 1;
|
|
}
|
|
for (addr = addrlo; addr <= addrhi; addr++) {
|
|
for (reg = reglo; reg < reghi + 1; reg++) {
|
|
if (miiphy_read(devname, addr, reg, ®s[reg]) != 0) {
|
|
ok = 0;
|
|
printf(
|
|
"Error reading from the PHY addr=%02x reg=%02x\n",
|
|
addr, reg);
|
|
rcode = 1;
|
|
}
|
|
}
|
|
if (ok)
|
|
MII_dump_0_to_5(regs, reglo, reghi);
|
|
printf("\n");
|
|
}
|
|
} else if (strncmp(op, "de", 2) == 0) {
|
|
if (argc == 2)
|
|
miiphy_listdev ();
|
|
else
|
|
miiphy_set_current_dev (argv[2]);
|
|
} else {
|
|
return CMD_RET_USAGE;
|
|
}
|
|
|
|
/*
|
|
* Save the parameters for repeats.
|
|
*/
|
|
last_op[0] = op[0];
|
|
last_op[1] = op[1];
|
|
last_addr_lo = addrlo;
|
|
last_addr_hi = addrhi;
|
|
last_reg_lo = reglo;
|
|
last_reg_hi = reghi;
|
|
last_data = data;
|
|
last_mask = mask;
|
|
|
|
return rcode;
|
|
}
|
|
|
|
/***************************************************/
|
|
|
|
U_BOOT_CMD(
|
|
mii, 6, 1, do_mii,
|
|
"MII utility commands",
|
|
"device - list available devices\n"
|
|
"mii device <devname> - set current device\n"
|
|
"mii info <addr> - display MII PHY info\n"
|
|
"mii read <addr> <reg> - read MII PHY <addr> register <reg>\n"
|
|
"mii write <addr> <reg> <data> - write MII PHY <addr> register <reg>\n"
|
|
"mii modify <addr> <reg> <data> <mask> - modify MII PHY <addr> register <reg>\n"
|
|
" updating bits identified in <mask>\n"
|
|
"mii dump <addr> <reg> - pretty-print <addr> <reg> (0-5 only)\n"
|
|
"Addr and/or reg may be ranges, e.g. 2-7."
|
|
);
|