u-boot/board/sifive/fu540/spl.c
Bin Meng 3581811dc2 riscv: sifive/fu540: Move SPL related functions to spl.c
It's better to keep all SPL related functions in the same spl.c.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Leo Liang <ycliang@andestech.com>
Reviewed-by: Rick Chen <rick@andestech.com>
Reviewed-by: Pragnesh Patel <pragnesh.patel@sifive.com>
Tested-by: Pragnesh Patel <pragnesh.patel@sifive.com>
2020-08-14 14:38:53 +08:00

88 lines
1.7 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (c) 2019 SiFive, Inc
*
* Authors:
* Pragnesh Patel <pragnesh.patel@sifive.com>
*/
#include <init.h>
#include <spl.h>
#include <misc.h>
#include <log.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <asm/gpio.h>
#include <asm/arch/gpio.h>
#include <asm/arch/spl.h>
#define GEM_PHY_RESET SIFIVE_GENERIC_GPIO_NR(0, 12)
#define MODE_SELECT_REG 0x1000
#define MODE_SELECT_QSPI 0x6
#define MODE_SELECT_SD 0xb
#define MODE_SELECT_MASK GENMASK(3, 0)
int spl_board_init_f(void)
{
int ret;
ret = spl_soc_init();
if (ret) {
debug("FU540 SPL init failed: %d\n", ret);
return ret;
}
/*
* GEMGXL init VSC8541 PHY reset sequence;
* leave pull-down active for 2ms
*/
udelay(2000);
ret = gpio_request(GEM_PHY_RESET, "gem_phy_reset");
if (ret) {
debug("gem_phy_reset gpio request failed: %d\n", ret);
return ret;
}
/* Set GPIO 12 (PHY NRESET) */
ret = gpio_direction_output(GEM_PHY_RESET, 1);
if (ret) {
debug("gem_phy_reset gpio direction set failed: %d\n", ret);
return ret;
}
udelay(1);
/* Reset PHY again to enter unmanaged mode */
gpio_set_value(GEM_PHY_RESET, 0);
udelay(1);
gpio_set_value(GEM_PHY_RESET, 1);
mdelay(15);
return 0;
}
u32 spl_boot_device(void)
{
u32 mode_select = readl((void *)MODE_SELECT_REG);
u32 boot_device = mode_select & MODE_SELECT_MASK;
switch (boot_device) {
case MODE_SELECT_QSPI:
return BOOT_DEVICE_SPI;
case MODE_SELECT_SD:
return BOOT_DEVICE_MMC1;
default:
debug("Unsupported boot device 0x%x but trying MMC1\n",
boot_device);
return BOOT_DEVICE_MMC1;
}
}
#ifdef CONFIG_SPL_LOAD_FIT
int board_fit_config_name_match(const char *name)
{
/* boot using first FIT config */
return 0;
}
#endif