u-boot/board/boundary/nitrogen6x/nitrogen6x.c
Masahiro Yamada b75d8dc564 treewide: convert bd_t to struct bd_info by coccinelle
The Linux coding style guide (Documentation/process/coding-style.rst)
clearly says:

  It's a **mistake** to use typedef for structures and pointers.

Besides, using typedef for structures is annoying when you try to make
headers self-contained.

Let's say you have the following function declaration in a header:

  void foo(bd_t *bd);

This is not self-contained since bd_t is not defined.

To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h>

  #include <asm/u-boot.h>
  void foo(bd_t *bd);

Then, the include direcective pulls in more bloat needlessly.

If you use 'struct bd_info' instead, it is enough to put a forward
declaration as follows:

  struct bd_info;
  void foo(struct bd_info *bd);

Right, typedef'ing bd_t is a mistake.

I used coccinelle to generate this commit.

The semantic patch that makes this change is as follows:

  <smpl>
  @@
  typedef bd_t;
  @@
  -bd_t
  +struct bd_info
  </smpl>

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-07-17 09:30:13 -04:00

1004 lines
27 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2010-2013 Freescale Semiconductor, Inc.
* Copyright (C) 2013, Boundary Devices <info@boundarydevices.com>
*/
#include <common.h>
#include <command.h>
#include <env.h>
#include <init.h>
#include <net.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/iomux.h>
#include <asm/arch/sys_proto.h>
#include <malloc.h>
#include <asm/arch/mx6-pins.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <asm/gpio.h>
#include <asm/mach-imx/iomux-v3.h>
#include <asm/mach-imx/mxc_i2c.h>
#include <asm/mach-imx/sata.h>
#include <asm/mach-imx/spi.h>
#include <asm/mach-imx/boot_mode.h>
#include <asm/mach-imx/video.h>
#include <fsl_esdhc_imx.h>
#include <micrel.h>
#include <miiphy.h>
#include <netdev.h>
#include <asm/arch/crm_regs.h>
#include <asm/arch/mxc_hdmi.h>
#include <i2c.h>
#include <input.h>
#include <netdev.h>
#include <usb/ehci-ci.h>
DECLARE_GLOBAL_DATA_PTR;
#define GP_USB_OTG_PWR IMX_GPIO_NR(3, 22)
#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \
PAD_CTL_SRE_FAST | PAD_CTL_HYS)
#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | \
PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm | \
PAD_CTL_SRE_FAST | PAD_CTL_HYS)
#define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
#define SPI_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_SPEED_MED | \
PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST)
#define BUTTON_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
#define I2C_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \
PAD_CTL_ODE | PAD_CTL_SRE_FAST)
#define RGB_PAD_CTRL PAD_CTL_DSE_120ohm
#define WEAK_PULLUP (PAD_CTL_PUS_100K_UP | \
PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \
PAD_CTL_SRE_SLOW)
#define WEAK_PULLDOWN (PAD_CTL_PUS_100K_DOWN | \
PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \
PAD_CTL_HYS | PAD_CTL_SRE_SLOW)
#define OUTPUT_40OHM (PAD_CTL_SPEED_MED|PAD_CTL_DSE_40ohm)
/* Prevent compiler error if gpio number 08 or 09 is used */
#define not_octal(gp) ((((0x##gp >> 4) & 0xf) * 10) + ((0x##gp & 0xf)))
#define _I2C_PADS_INFO_CPU(cpu, i2cnum, scl_pad, scl_bank, scl_gp, \
sda_pad, sda_bank, sda_gp, pad_ctrl, join_io) { \
.scl = { \
.i2c_mode = NEW_PAD_CTRL(cpu##_PAD_##scl_pad##__##i2cnum##_SCL,\
pad_ctrl), \
.gpio_mode = NEW_PAD_CTRL( \
cpu##_PAD_##scl_pad##__GPIO##scl_bank##join_io##scl_gp,\
pad_ctrl), \
.gp = IMX_GPIO_NR(scl_bank, not_octal(scl_gp)) \
}, \
.sda = { \
.i2c_mode = NEW_PAD_CTRL(cpu##_PAD_##sda_pad##__##i2cnum##_SDA,\
pad_ctrl), \
.gpio_mode = NEW_PAD_CTRL( \
cpu##_PAD_##sda_pad##__GPIO##sda_bank##join_io##sda_gp,\
pad_ctrl), \
.gp = IMX_GPIO_NR(sda_bank, not_octal(sda_gp)) \
} \
}
#define I2C_PADS_INFO_CPU(cpu, i2cnum, scl_pad, scl_bank, scl_gp, \
sda_pad, sda_bank, sda_gp, pad_ctrl) \
_I2C_PADS_INFO_CPU(cpu, i2cnum, scl_pad, scl_bank, scl_gp, \
sda_pad, sda_bank, sda_gp, pad_ctrl, _IO)
#if defined(CONFIG_MX6QDL)
#define I2C_PADS_INFO_ENTRY(i2cnum, scl_pad, scl_bank, scl_gp, \
sda_pad, sda_bank, sda_gp, pad_ctrl) \
I2C_PADS_INFO_CPU(MX6Q, i2cnum, scl_pad, scl_bank, scl_gp, \
sda_pad, sda_bank, sda_gp, pad_ctrl), \
I2C_PADS_INFO_CPU(MX6DL, i2cnum, scl_pad, scl_bank, scl_gp, \
sda_pad, sda_bank, sda_gp, pad_ctrl)
#define I2C_PADS_INFO_ENTRY_SPACING 2
#define IOMUX_PAD_CTRL(name, pad_ctrl) \
NEW_PAD_CTRL(MX6Q_PAD_##name, pad_ctrl), \
NEW_PAD_CTRL(MX6DL_PAD_##name, pad_ctrl)
#else
#define I2C_PADS_INFO_ENTRY(i2cnum, scl_pad, scl_bank, scl_gp, \
sda_pad, sda_bank, sda_gp, pad_ctrl) \
I2C_PADS_INFO_CPU(MX6, i2cnum, scl_pad, scl_bank, scl_gp, \
sda_pad, sda_bank, sda_gp, pad_ctrl)
#define I2C_PADS_INFO_ENTRY_SPACING 1
#define IOMUX_PAD_CTRL(name, pad_ctrl) NEW_PAD_CTRL(MX6_PAD_##name, pad_ctrl)
#endif
int dram_init(void)
{
gd->ram_size = ((ulong)CONFIG_DDR_MB * 1024 * 1024);
return 0;
}
static iomux_v3_cfg_t const uart1_pads[] = {
IOMUX_PAD_CTRL(SD3_DAT6__UART1_RX_DATA, UART_PAD_CTRL),
IOMUX_PAD_CTRL(SD3_DAT7__UART1_TX_DATA, UART_PAD_CTRL),
};
static iomux_v3_cfg_t const uart2_pads[] = {
IOMUX_PAD_CTRL(EIM_D26__UART2_TX_DATA, UART_PAD_CTRL),
IOMUX_PAD_CTRL(EIM_D27__UART2_RX_DATA, UART_PAD_CTRL),
};
static struct i2c_pads_info i2c_pads[] = {
/* I2C1, SGTL5000 */
I2C_PADS_INFO_ENTRY(I2C1, EIM_D21, 3, 21, EIM_D28, 3, 28, I2C_PAD_CTRL),
/* I2C2 Camera, MIPI */
I2C_PADS_INFO_ENTRY(I2C2, KEY_COL3, 4, 12, KEY_ROW3, 4, 13,
I2C_PAD_CTRL),
/* I2C3, J15 - RGB connector */
I2C_PADS_INFO_ENTRY(I2C3, GPIO_5, 1, 05, GPIO_16, 7, 11, I2C_PAD_CTRL),
};
#define I2C_BUS_CNT 3
static iomux_v3_cfg_t const usdhc2_pads[] = {
IOMUX_PAD_CTRL(SD2_CLK__SD2_CLK, USDHC_PAD_CTRL),
IOMUX_PAD_CTRL(SD2_CMD__SD2_CMD, USDHC_PAD_CTRL),
IOMUX_PAD_CTRL(SD2_DAT0__SD2_DATA0, USDHC_PAD_CTRL),
IOMUX_PAD_CTRL(SD2_DAT1__SD2_DATA1, USDHC_PAD_CTRL),
IOMUX_PAD_CTRL(SD2_DAT2__SD2_DATA2, USDHC_PAD_CTRL),
IOMUX_PAD_CTRL(SD2_DAT3__SD2_DATA3, USDHC_PAD_CTRL),
};
static iomux_v3_cfg_t const enet_pads1[] = {
IOMUX_PAD_CTRL(ENET_MDIO__ENET_MDIO, ENET_PAD_CTRL),
IOMUX_PAD_CTRL(ENET_MDC__ENET_MDC, ENET_PAD_CTRL),
IOMUX_PAD_CTRL(RGMII_TXC__RGMII_TXC, ENET_PAD_CTRL),
IOMUX_PAD_CTRL(RGMII_TD0__RGMII_TD0, ENET_PAD_CTRL),
IOMUX_PAD_CTRL(RGMII_TD1__RGMII_TD1, ENET_PAD_CTRL),
IOMUX_PAD_CTRL(RGMII_TD2__RGMII_TD2, ENET_PAD_CTRL),
IOMUX_PAD_CTRL(RGMII_TD3__RGMII_TD3, ENET_PAD_CTRL),
IOMUX_PAD_CTRL(RGMII_TX_CTL__RGMII_TX_CTL, ENET_PAD_CTRL),
IOMUX_PAD_CTRL(ENET_REF_CLK__ENET_TX_CLK, ENET_PAD_CTRL),
/* pin 35 - 1 (PHY_AD2) on reset */
IOMUX_PAD_CTRL(RGMII_RXC__GPIO6_IO30, NO_PAD_CTRL),
/* pin 32 - 1 - (MODE0) all */
IOMUX_PAD_CTRL(RGMII_RD0__GPIO6_IO25, NO_PAD_CTRL),
/* pin 31 - 1 - (MODE1) all */
IOMUX_PAD_CTRL(RGMII_RD1__GPIO6_IO27, NO_PAD_CTRL),
/* pin 28 - 1 - (MODE2) all */
IOMUX_PAD_CTRL(RGMII_RD2__GPIO6_IO28, NO_PAD_CTRL),
/* pin 27 - 1 - (MODE3) all */
IOMUX_PAD_CTRL(RGMII_RD3__GPIO6_IO29, NO_PAD_CTRL),
/* pin 33 - 1 - (CLK125_EN) 125Mhz clockout enabled */
IOMUX_PAD_CTRL(RGMII_RX_CTL__GPIO6_IO24, NO_PAD_CTRL),
/* pin 42 PHY nRST */
IOMUX_PAD_CTRL(EIM_D23__GPIO3_IO23, NO_PAD_CTRL),
IOMUX_PAD_CTRL(ENET_RXD0__GPIO1_IO27, NO_PAD_CTRL),
};
static iomux_v3_cfg_t const enet_pads2[] = {
IOMUX_PAD_CTRL(RGMII_RXC__RGMII_RXC, ENET_PAD_CTRL),
IOMUX_PAD_CTRL(RGMII_RD0__RGMII_RD0, ENET_PAD_CTRL),
IOMUX_PAD_CTRL(RGMII_RD1__RGMII_RD1, ENET_PAD_CTRL),
IOMUX_PAD_CTRL(RGMII_RD2__RGMII_RD2, ENET_PAD_CTRL),
IOMUX_PAD_CTRL(RGMII_RD3__RGMII_RD3, ENET_PAD_CTRL),
IOMUX_PAD_CTRL(RGMII_RX_CTL__RGMII_RX_CTL, ENET_PAD_CTRL),
};
static iomux_v3_cfg_t const misc_pads[] = {
IOMUX_PAD_CTRL(GPIO_1__USB_OTG_ID, WEAK_PULLUP),
IOMUX_PAD_CTRL(KEY_COL4__USB_OTG_OC, WEAK_PULLUP),
IOMUX_PAD_CTRL(EIM_D30__USB_H1_OC, WEAK_PULLUP),
/* OTG Power enable */
IOMUX_PAD_CTRL(EIM_D22__GPIO3_IO22, OUTPUT_40OHM),
};
/* wl1271 pads on nitrogen6x */
static iomux_v3_cfg_t const wl12xx_pads[] = {
IOMUX_PAD_CTRL(NANDF_CS1__GPIO6_IO14, WEAK_PULLDOWN),
IOMUX_PAD_CTRL(NANDF_CS2__GPIO6_IO15, OUTPUT_40OHM),
IOMUX_PAD_CTRL(NANDF_CS3__GPIO6_IO16, OUTPUT_40OHM),
};
#define WL12XX_WL_IRQ_GP IMX_GPIO_NR(6, 14)
#define WL12XX_WL_ENABLE_GP IMX_GPIO_NR(6, 15)
#define WL12XX_BT_ENABLE_GP IMX_GPIO_NR(6, 16)
/* Button assignments for J14 */
static iomux_v3_cfg_t const button_pads[] = {
/* Menu */
IOMUX_PAD_CTRL(NANDF_D1__GPIO2_IO01, BUTTON_PAD_CTRL),
/* Back */
IOMUX_PAD_CTRL(NANDF_D2__GPIO2_IO02, BUTTON_PAD_CTRL),
/* Labelled Search (mapped to Power under Android) */
IOMUX_PAD_CTRL(NANDF_D3__GPIO2_IO03, BUTTON_PAD_CTRL),
/* Home */
IOMUX_PAD_CTRL(NANDF_D4__GPIO2_IO04, BUTTON_PAD_CTRL),
/* Volume Down */
IOMUX_PAD_CTRL(GPIO_19__GPIO4_IO05, BUTTON_PAD_CTRL),
/* Volume Up */
IOMUX_PAD_CTRL(GPIO_18__GPIO7_IO13, BUTTON_PAD_CTRL),
};
static void setup_iomux_enet(void)
{
gpio_direction_output(IMX_GPIO_NR(3, 23), 0); /* SABRE Lite PHY rst */
gpio_direction_output(IMX_GPIO_NR(1, 27), 0); /* Nitrogen6X PHY rst */
gpio_direction_output(IMX_GPIO_NR(6, 30), 1);
gpio_direction_output(IMX_GPIO_NR(6, 25), 1);
gpio_direction_output(IMX_GPIO_NR(6, 27), 1);
gpio_direction_output(IMX_GPIO_NR(6, 28), 1);
gpio_direction_output(IMX_GPIO_NR(6, 29), 1);
SETUP_IOMUX_PADS(enet_pads1);
gpio_direction_output(IMX_GPIO_NR(6, 24), 1);
/* Need delay 10ms according to KSZ9021 spec */
udelay(1000 * 10);
gpio_set_value(IMX_GPIO_NR(3, 23), 1); /* SABRE Lite PHY reset */
gpio_set_value(IMX_GPIO_NR(1, 27), 1); /* Nitrogen6X PHY reset */
SETUP_IOMUX_PADS(enet_pads2);
udelay(100); /* Wait 100 us before using mii interface */
}
static iomux_v3_cfg_t const usb_pads[] = {
IOMUX_PAD_CTRL(GPIO_17__GPIO7_IO12, NO_PAD_CTRL),
};
static void setup_iomux_uart(void)
{
SETUP_IOMUX_PADS(uart1_pads);
SETUP_IOMUX_PADS(uart2_pads);
}
#ifdef CONFIG_USB_EHCI_MX6
int board_ehci_hcd_init(int port)
{
SETUP_IOMUX_PADS(usb_pads);
/* Reset USB hub */
gpio_direction_output(IMX_GPIO_NR(7, 12), 0);
mdelay(2);
gpio_set_value(IMX_GPIO_NR(7, 12), 1);
return 0;
}
int board_ehci_power(int port, int on)
{
if (port)
return 0;
gpio_set_value(GP_USB_OTG_PWR, on);
return 0;
}
#endif
#ifdef CONFIG_MXC_SPI
int board_spi_cs_gpio(unsigned bus, unsigned cs)
{
return (bus == 0 && cs == 0) ? (IMX_GPIO_NR(3, 19)) : -1;
}
static iomux_v3_cfg_t const ecspi1_pads[] = {
/* SS1 */
IOMUX_PAD_CTRL(EIM_D19__GPIO3_IO19, NO_PAD_CTRL),
IOMUX_PAD_CTRL(EIM_D17__ECSPI1_MISO, SPI_PAD_CTRL),
IOMUX_PAD_CTRL(EIM_D18__ECSPI1_MOSI, SPI_PAD_CTRL),
IOMUX_PAD_CTRL(EIM_D16__ECSPI1_SCLK, SPI_PAD_CTRL),
};
static void setup_spi(void)
{
SETUP_IOMUX_PADS(ecspi1_pads);
}
#endif
int board_phy_config(struct phy_device *phydev)
{
/* min rx data delay */
ksz9021_phy_extended_write(phydev,
MII_KSZ9021_EXT_RGMII_RX_DATA_SKEW, 0x0);
/* min tx data delay */
ksz9021_phy_extended_write(phydev,
MII_KSZ9021_EXT_RGMII_TX_DATA_SKEW, 0x0);
/* max rx/tx clock delay, min rx/tx control */
ksz9021_phy_extended_write(phydev,
MII_KSZ9021_EXT_RGMII_CLOCK_SKEW, 0xf0f0);
if (phydev->drv->config)
phydev->drv->config(phydev);
return 0;
}
int board_eth_init(struct bd_info *bis)
{
uint32_t base = IMX_FEC_BASE;
struct mii_dev *bus = NULL;
struct phy_device *phydev = NULL;
int ret;
gpio_request(WL12XX_WL_IRQ_GP, "wifi_irq");
gpio_request(IMX_GPIO_NR(6, 30), "rgmii_rxc");
gpio_request(IMX_GPIO_NR(6, 25), "rgmii_rd0");
gpio_request(IMX_GPIO_NR(6, 27), "rgmii_rd1");
gpio_request(IMX_GPIO_NR(6, 28), "rgmii_rd2");
gpio_request(IMX_GPIO_NR(6, 29), "rgmii_rd3");
gpio_request(IMX_GPIO_NR(6, 24), "rgmii_rx_ctl");
gpio_request(IMX_GPIO_NR(3, 23), "rgmii_reset_sabrelite");
gpio_request(IMX_GPIO_NR(1, 27), "rgmii_reset_nitrogen6x");
setup_iomux_enet();
#ifdef CONFIG_FEC_MXC
bus = fec_get_miibus(base, -1);
if (!bus)
return -EINVAL;
/* scan phy 4,5,6,7 */
phydev = phy_find_by_mask(bus, (0xf << 4), PHY_INTERFACE_MODE_RGMII);
if (!phydev) {
ret = -EINVAL;
goto free_bus;
}
printf("using phy at %d\n", phydev->addr);
ret = fec_probe(bis, -1, base, bus, phydev);
if (ret)
goto free_phydev;
#endif
#ifdef CONFIG_CI_UDC
/* For otg ethernet*/
usb_eth_initialize(bis);
#endif
return 0;
free_phydev:
free(phydev);
free_bus:
free(bus);
return ret;
}
static void setup_buttons(void)
{
SETUP_IOMUX_PADS(button_pads);
}
#if defined(CONFIG_VIDEO_IPUV3)
static iomux_v3_cfg_t const backlight_pads[] = {
/* Backlight on RGB connector: J15 */
IOMUX_PAD_CTRL(SD1_DAT3__GPIO1_IO21, NO_PAD_CTRL),
#define RGB_BACKLIGHT_GP IMX_GPIO_NR(1, 21)
/* Backlight on LVDS connector: J6 */
IOMUX_PAD_CTRL(SD1_CMD__GPIO1_IO18, NO_PAD_CTRL),
#define LVDS_BACKLIGHT_GP IMX_GPIO_NR(1, 18)
};
static iomux_v3_cfg_t const rgb_pads[] = {
IOMUX_PAD_CTRL(DI0_DISP_CLK__IPU1_DI0_DISP_CLK, RGB_PAD_CTRL),
IOMUX_PAD_CTRL(DI0_PIN15__IPU1_DI0_PIN15, RGB_PAD_CTRL),
IOMUX_PAD_CTRL(DI0_PIN2__IPU1_DI0_PIN02, RGB_PAD_CTRL),
IOMUX_PAD_CTRL(DI0_PIN3__IPU1_DI0_PIN03, RGB_PAD_CTRL),
IOMUX_PAD_CTRL(DI0_PIN4__GPIO4_IO20, RGB_PAD_CTRL),
IOMUX_PAD_CTRL(DISP0_DAT0__IPU1_DISP0_DATA00, RGB_PAD_CTRL),
IOMUX_PAD_CTRL(DISP0_DAT1__IPU1_DISP0_DATA01, RGB_PAD_CTRL),
IOMUX_PAD_CTRL(DISP0_DAT2__IPU1_DISP0_DATA02, RGB_PAD_CTRL),
IOMUX_PAD_CTRL(DISP0_DAT3__IPU1_DISP0_DATA03, RGB_PAD_CTRL),
IOMUX_PAD_CTRL(DISP0_DAT4__IPU1_DISP0_DATA04, RGB_PAD_CTRL),
IOMUX_PAD_CTRL(DISP0_DAT5__IPU1_DISP0_DATA05, RGB_PAD_CTRL),
IOMUX_PAD_CTRL(DISP0_DAT6__IPU1_DISP0_DATA06, RGB_PAD_CTRL),
IOMUX_PAD_CTRL(DISP0_DAT7__IPU1_DISP0_DATA07, RGB_PAD_CTRL),
IOMUX_PAD_CTRL(DISP0_DAT8__IPU1_DISP0_DATA08, RGB_PAD_CTRL),
IOMUX_PAD_CTRL(DISP0_DAT9__IPU1_DISP0_DATA09, RGB_PAD_CTRL),
IOMUX_PAD_CTRL(DISP0_DAT10__IPU1_DISP0_DATA10, RGB_PAD_CTRL),
IOMUX_PAD_CTRL(DISP0_DAT11__IPU1_DISP0_DATA11, RGB_PAD_CTRL),
IOMUX_PAD_CTRL(DISP0_DAT12__IPU1_DISP0_DATA12, RGB_PAD_CTRL),
IOMUX_PAD_CTRL(DISP0_DAT13__IPU1_DISP0_DATA13, RGB_PAD_CTRL),
IOMUX_PAD_CTRL(DISP0_DAT14__IPU1_DISP0_DATA14, RGB_PAD_CTRL),
IOMUX_PAD_CTRL(DISP0_DAT15__IPU1_DISP0_DATA15, RGB_PAD_CTRL),
IOMUX_PAD_CTRL(DISP0_DAT16__IPU1_DISP0_DATA16, RGB_PAD_CTRL),
IOMUX_PAD_CTRL(DISP0_DAT17__IPU1_DISP0_DATA17, RGB_PAD_CTRL),
IOMUX_PAD_CTRL(DISP0_DAT18__IPU1_DISP0_DATA18, RGB_PAD_CTRL),
IOMUX_PAD_CTRL(DISP0_DAT19__IPU1_DISP0_DATA19, RGB_PAD_CTRL),
IOMUX_PAD_CTRL(DISP0_DAT20__IPU1_DISP0_DATA20, RGB_PAD_CTRL),
IOMUX_PAD_CTRL(DISP0_DAT21__IPU1_DISP0_DATA21, RGB_PAD_CTRL),
IOMUX_PAD_CTRL(DISP0_DAT22__IPU1_DISP0_DATA22, RGB_PAD_CTRL),
IOMUX_PAD_CTRL(DISP0_DAT23__IPU1_DISP0_DATA23, RGB_PAD_CTRL),
};
static void do_enable_hdmi(struct display_info_t const *dev)
{
imx_enable_hdmi_phy();
}
static int detect_i2c(struct display_info_t const *dev)
{
return ((0 == i2c_set_bus_num(dev->bus))
&&
(0 == i2c_probe(dev->addr)));
}
static void enable_lvds(struct display_info_t const *dev)
{
struct iomuxc *iomux = (struct iomuxc *)
IOMUXC_BASE_ADDR;
u32 reg = readl(&iomux->gpr[2]);
reg |= IOMUXC_GPR2_DATA_WIDTH_CH0_24BIT;
writel(reg, &iomux->gpr[2]);
gpio_direction_output(LVDS_BACKLIGHT_GP, 1);
}
static void enable_lvds_jeida(struct display_info_t const *dev)
{
struct iomuxc *iomux = (struct iomuxc *)
IOMUXC_BASE_ADDR;
u32 reg = readl(&iomux->gpr[2]);
reg |= IOMUXC_GPR2_DATA_WIDTH_CH0_24BIT
|IOMUXC_GPR2_BIT_MAPPING_CH0_JEIDA;
writel(reg, &iomux->gpr[2]);
gpio_direction_output(LVDS_BACKLIGHT_GP, 1);
}
static void enable_rgb(struct display_info_t const *dev)
{
SETUP_IOMUX_PADS(rgb_pads);
gpio_direction_output(RGB_BACKLIGHT_GP, 1);
}
struct display_info_t const displays[] = {{
.bus = 1,
.addr = 0x50,
.pixfmt = IPU_PIX_FMT_RGB24,
.detect = detect_i2c,
.enable = do_enable_hdmi,
.mode = {
.name = "HDMI",
.refresh = 60,
.xres = 1024,
.yres = 768,
.pixclock = 15385,
.left_margin = 220,
.right_margin = 40,
.upper_margin = 21,
.lower_margin = 7,
.hsync_len = 60,
.vsync_len = 10,
.sync = FB_SYNC_EXT,
.vmode = FB_VMODE_NONINTERLACED
} }, {
.bus = 0,
.addr = 0,
.pixfmt = IPU_PIX_FMT_RGB24,
.detect = NULL,
.enable = enable_lvds_jeida,
.mode = {
.name = "LDB-WXGA",
.refresh = 60,
.xres = 1280,
.yres = 800,
.pixclock = 14065,
.left_margin = 40,
.right_margin = 40,
.upper_margin = 3,
.lower_margin = 80,
.hsync_len = 10,
.vsync_len = 10,
.sync = FB_SYNC_EXT,
.vmode = FB_VMODE_NONINTERLACED
} }, {
.bus = 0,
.addr = 0,
.pixfmt = IPU_PIX_FMT_RGB24,
.detect = NULL,
.enable = enable_lvds,
.mode = {
.name = "LDB-WXGA-S",
.refresh = 60,
.xres = 1280,
.yres = 800,
.pixclock = 14065,
.left_margin = 40,
.right_margin = 40,
.upper_margin = 3,
.lower_margin = 80,
.hsync_len = 10,
.vsync_len = 10,
.sync = FB_SYNC_EXT,
.vmode = FB_VMODE_NONINTERLACED
} }, {
.bus = 2,
.addr = 0x4,
.pixfmt = IPU_PIX_FMT_LVDS666,
.detect = detect_i2c,
.enable = enable_lvds,
.mode = {
.name = "Hannstar-XGA",
.refresh = 60,
.xres = 1024,
.yres = 768,
.pixclock = 15385,
.left_margin = 220,
.right_margin = 40,
.upper_margin = 21,
.lower_margin = 7,
.hsync_len = 60,
.vsync_len = 10,
.sync = FB_SYNC_EXT,
.vmode = FB_VMODE_NONINTERLACED
} }, {
.bus = 0,
.addr = 0,
.pixfmt = IPU_PIX_FMT_LVDS666,
.detect = NULL,
.enable = enable_lvds,
.mode = {
.name = "LG-9.7",
.refresh = 60,
.xres = 1024,
.yres = 768,
.pixclock = 15385, /* ~65MHz */
.left_margin = 480,
.right_margin = 260,
.upper_margin = 16,
.lower_margin = 6,
.hsync_len = 250,
.vsync_len = 10,
.sync = FB_SYNC_EXT,
.vmode = FB_VMODE_NONINTERLACED
} }, {
.bus = 2,
.addr = 0x38,
.pixfmt = IPU_PIX_FMT_LVDS666,
.detect = detect_i2c,
.enable = enable_lvds,
.mode = {
.name = "wsvga-lvds",
.refresh = 60,
.xres = 1024,
.yres = 600,
.pixclock = 15385,
.left_margin = 220,
.right_margin = 40,
.upper_margin = 21,
.lower_margin = 7,
.hsync_len = 60,
.vsync_len = 10,
.sync = FB_SYNC_EXT,
.vmode = FB_VMODE_NONINTERLACED
} }, {
.bus = 2,
.addr = 0x10,
.pixfmt = IPU_PIX_FMT_RGB666,
.detect = detect_i2c,
.enable = enable_rgb,
.mode = {
.name = "fusion7",
.refresh = 60,
.xres = 800,
.yres = 480,
.pixclock = 33898,
.left_margin = 96,
.right_margin = 24,
.upper_margin = 3,
.lower_margin = 10,
.hsync_len = 72,
.vsync_len = 7,
.sync = 0x40000002,
.vmode = FB_VMODE_NONINTERLACED
} }, {
.bus = 0,
.addr = 0,
.pixfmt = IPU_PIX_FMT_RGB666,
.detect = NULL,
.enable = enable_rgb,
.mode = {
.name = "svga",
.refresh = 60,
.xres = 800,
.yres = 600,
.pixclock = 15385,
.left_margin = 220,
.right_margin = 40,
.upper_margin = 21,
.lower_margin = 7,
.hsync_len = 60,
.vsync_len = 10,
.sync = 0,
.vmode = FB_VMODE_NONINTERLACED
} }, {
.bus = 2,
.addr = 0x41,
.pixfmt = IPU_PIX_FMT_LVDS666,
.detect = detect_i2c,
.enable = enable_lvds,
.mode = {
.name = "amp1024x600",
.refresh = 60,
.xres = 1024,
.yres = 600,
.pixclock = 15385,
.left_margin = 220,
.right_margin = 40,
.upper_margin = 21,
.lower_margin = 7,
.hsync_len = 60,
.vsync_len = 10,
.sync = FB_SYNC_EXT,
.vmode = FB_VMODE_NONINTERLACED
} }, {
.bus = 0,
.addr = 0,
.pixfmt = IPU_PIX_FMT_LVDS666,
.detect = 0,
.enable = enable_lvds,
.mode = {
.name = "wvga-lvds",
.refresh = 57,
.xres = 800,
.yres = 480,
.pixclock = 15385,
.left_margin = 220,
.right_margin = 40,
.upper_margin = 21,
.lower_margin = 7,
.hsync_len = 60,
.vsync_len = 10,
.sync = FB_SYNC_EXT,
.vmode = FB_VMODE_NONINTERLACED
} }, {
.bus = 2,
.addr = 0x48,
.pixfmt = IPU_PIX_FMT_RGB666,
.detect = detect_i2c,
.enable = enable_rgb,
.mode = {
.name = "wvga-rgb",
.refresh = 57,
.xres = 800,
.yres = 480,
.pixclock = 37037,
.left_margin = 40,
.right_margin = 60,
.upper_margin = 10,
.lower_margin = 10,
.hsync_len = 20,
.vsync_len = 10,
.sync = 0,
.vmode = FB_VMODE_NONINTERLACED
} }, {
.bus = 0,
.addr = 0,
.pixfmt = IPU_PIX_FMT_RGB24,
.detect = NULL,
.enable = enable_rgb,
.mode = {
.name = "qvga",
.refresh = 60,
.xres = 320,
.yres = 240,
.pixclock = 37037,
.left_margin = 38,
.right_margin = 37,
.upper_margin = 16,
.lower_margin = 15,
.hsync_len = 30,
.vsync_len = 3,
.sync = 0,
.vmode = FB_VMODE_NONINTERLACED
} } };
size_t display_count = ARRAY_SIZE(displays);
int board_cfb_skip(void)
{
return NULL != env_get("novideo");
}
static void setup_display(void)
{
struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
int reg;
enable_ipu_clock();
imx_setup_hdmi();
/* Turn on LDB0,IPU,IPU DI0 clocks */
reg = __raw_readl(&mxc_ccm->CCGR3);
reg |= MXC_CCM_CCGR3_LDB_DI0_MASK;
writel(reg, &mxc_ccm->CCGR3);
/* set LDB0, LDB1 clk select to 011/011 */
reg = readl(&mxc_ccm->cs2cdr);
reg &= ~(MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK
|MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK);
reg |= (3<<MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_OFFSET)
|(3<<MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_OFFSET);
writel(reg, &mxc_ccm->cs2cdr);
reg = readl(&mxc_ccm->cscmr2);
reg |= MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV;
writel(reg, &mxc_ccm->cscmr2);
reg = readl(&mxc_ccm->chsccdr);
reg |= (CHSCCDR_CLK_SEL_LDB_DI0
<<MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET);
writel(reg, &mxc_ccm->chsccdr);
reg = IOMUXC_GPR2_BGREF_RRMODE_EXTERNAL_RES
|IOMUXC_GPR2_DI1_VS_POLARITY_ACTIVE_HIGH
|IOMUXC_GPR2_DI0_VS_POLARITY_ACTIVE_LOW
|IOMUXC_GPR2_BIT_MAPPING_CH1_SPWG
|IOMUXC_GPR2_DATA_WIDTH_CH1_18BIT
|IOMUXC_GPR2_BIT_MAPPING_CH0_SPWG
|IOMUXC_GPR2_DATA_WIDTH_CH0_18BIT
|IOMUXC_GPR2_LVDS_CH1_MODE_DISABLED
|IOMUXC_GPR2_LVDS_CH0_MODE_ENABLED_DI0;
writel(reg, &iomux->gpr[2]);
reg = readl(&iomux->gpr[3]);
reg = (reg & ~(IOMUXC_GPR3_LVDS0_MUX_CTL_MASK
|IOMUXC_GPR3_HDMI_MUX_CTL_MASK))
| (IOMUXC_GPR3_MUX_SRC_IPU1_DI0
<<IOMUXC_GPR3_LVDS0_MUX_CTL_OFFSET);
writel(reg, &iomux->gpr[3]);
/* backlights off until needed */
SETUP_IOMUX_PADS(backlight_pads);
gpio_direction_input(LVDS_BACKLIGHT_GP);
gpio_direction_input(RGB_BACKLIGHT_GP);
}
#endif
static iomux_v3_cfg_t const init_pads[] = {
/* SGTL5000 sys_mclk */
IOMUX_PAD_CTRL(GPIO_0__CCM_CLKO1, OUTPUT_40OHM),
/* J5 - Camera MCLK */
IOMUX_PAD_CTRL(GPIO_3__CCM_CLKO2, OUTPUT_40OHM),
/* wl1271 pads on nitrogen6x */
/* WL12XX_WL_IRQ_GP */
IOMUX_PAD_CTRL(NANDF_CS1__GPIO6_IO14, WEAK_PULLDOWN),
/* WL12XX_WL_ENABLE_GP */
IOMUX_PAD_CTRL(NANDF_CS2__GPIO6_IO15, OUTPUT_40OHM),
/* WL12XX_BT_ENABLE_GP */
IOMUX_PAD_CTRL(NANDF_CS3__GPIO6_IO16, OUTPUT_40OHM),
/* USB otg power */
IOMUX_PAD_CTRL(EIM_D22__GPIO3_IO22, OUTPUT_40OHM),
IOMUX_PAD_CTRL(NANDF_D5__GPIO2_IO05, OUTPUT_40OHM),
IOMUX_PAD_CTRL(NANDF_WP_B__GPIO6_IO09, OUTPUT_40OHM),
IOMUX_PAD_CTRL(GPIO_8__GPIO1_IO08, OUTPUT_40OHM),
IOMUX_PAD_CTRL(GPIO_6__GPIO1_IO06, OUTPUT_40OHM),
};
#define WL12XX_WL_IRQ_GP IMX_GPIO_NR(6, 14)
static unsigned gpios_out_low[] = {
/* Disable wl1271 */
IMX_GPIO_NR(6, 15), /* disable wireless */
IMX_GPIO_NR(6, 16), /* disable bluetooth */
IMX_GPIO_NR(3, 22), /* disable USB otg power */
IMX_GPIO_NR(2, 5), /* ov5640 mipi camera reset */
IMX_GPIO_NR(1, 8), /* ov5642 reset */
};
static unsigned gpios_out_high[] = {
IMX_GPIO_NR(1, 6), /* ov5642 powerdown */
IMX_GPIO_NR(6, 9), /* ov5640 mipi camera power down */
};
static void set_gpios(unsigned *p, int cnt, int val)
{
int i;
for (i = 0; i < cnt; i++)
gpio_direction_output(*p++, val);
}
int board_early_init_f(void)
{
setup_iomux_uart();
set_gpios(gpios_out_high, ARRAY_SIZE(gpios_out_high), 1);
set_gpios(gpios_out_low, ARRAY_SIZE(gpios_out_low), 0);
gpio_direction_input(WL12XX_WL_IRQ_GP);
SETUP_IOMUX_PADS(wl12xx_pads);
SETUP_IOMUX_PADS(init_pads);
setup_buttons();
#if defined(CONFIG_VIDEO_IPUV3)
setup_display();
#endif
return 0;
}
/*
* Do not overwrite the console
* Use always serial for U-Boot console
*/
int overwrite_console(void)
{
return 1;
}
int board_init(void)
{
struct iomuxc *const iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
struct i2c_pads_info *p = i2c_pads;
int i;
int stride = 1;
#if defined(CONFIG_MX6QDL)
stride = 2;
if (!is_mx6dq() && !is_mx6dqp())
p += 1;
#endif
clrsetbits_le32(&iomuxc_regs->gpr[1],
IOMUXC_GPR1_OTG_ID_MASK,
IOMUXC_GPR1_OTG_ID_GPIO1);
SETUP_IOMUX_PADS(misc_pads);
/* address of boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
#ifdef CONFIG_MXC_SPI
setup_spi();
#endif
SETUP_IOMUX_PADS(usdhc2_pads);
for (i = 0; i < I2C_BUS_CNT; i++) {
setup_i2c(i, CONFIG_SYS_I2C_SPEED, 0x7f, p);
p += stride;
}
#ifdef CONFIG_SATA
setup_sata();
#endif
return 0;
}
int checkboard(void)
{
int ret = gpio_get_value(WL12XX_WL_IRQ_GP);
if (ret < 0) {
/* The gpios have not been probed yet. Read it myself */
struct gpio_regs *regs = (struct gpio_regs *)GPIO6_BASE_ADDR;
int gpio = WL12XX_WL_IRQ_GP & 0x1f;
ret = (readl(&regs->gpio_psr) >> gpio) & 0x01;
}
if (ret)
puts("Board: Nitrogen6X\n");
else
puts("Board: SABRE Lite\n");
return 0;
}
struct button_key {
char const *name;
unsigned gpnum;
char ident;
};
static struct button_key const buttons[] = {
{"back", IMX_GPIO_NR(2, 2), 'B'},
{"home", IMX_GPIO_NR(2, 4), 'H'},
{"menu", IMX_GPIO_NR(2, 1), 'M'},
{"search", IMX_GPIO_NR(2, 3), 'S'},
{"volup", IMX_GPIO_NR(7, 13), 'V'},
{"voldown", IMX_GPIO_NR(4, 5), 'v'},
};
/*
* generate a null-terminated string containing the buttons pressed
* returns number of keys pressed
*/
static int read_keys(char *buf)
{
int i, numpressed = 0;
for (i = 0; i < ARRAY_SIZE(buttons); i++) {
if (!gpio_get_value(buttons[i].gpnum))
buf[numpressed++] = buttons[i].ident;
}
buf[numpressed] = '\0';
return numpressed;
}
static int do_kbd(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
{
char envvalue[ARRAY_SIZE(buttons)+1];
int numpressed = read_keys(envvalue);
env_set("keybd", envvalue);
return numpressed == 0;
}
U_BOOT_CMD(
kbd, 1, 1, do_kbd,
"Tests for keypresses, sets 'keybd' environment variable",
"Returns 0 (true) to shell if key is pressed."
);
#ifdef CONFIG_PREBOOT
static char const kbd_magic_prefix[] = "key_magic";
static char const kbd_command_prefix[] = "key_cmd";
static void preboot_keys(void)
{
int numpressed;
char keypress[ARRAY_SIZE(buttons)+1];
numpressed = read_keys(keypress);
if (numpressed) {
char *kbd_magic_keys = env_get("magic_keys");
char *suffix;
/*
* loop over all magic keys
*/
for (suffix = kbd_magic_keys; *suffix; ++suffix) {
char *keys;
char magic[sizeof(kbd_magic_prefix) + 1];
sprintf(magic, "%s%c", kbd_magic_prefix, *suffix);
keys = env_get(magic);
if (keys) {
if (!strcmp(keys, keypress))
break;
}
}
if (*suffix) {
char cmd_name[sizeof(kbd_command_prefix) + 1];
char *cmd;
sprintf(cmd_name, "%s%c", kbd_command_prefix, *suffix);
cmd = env_get(cmd_name);
if (cmd) {
env_set("preboot", cmd);
return;
}
}
}
}
#endif
#ifdef CONFIG_CMD_BMODE
static const struct boot_mode board_boot_modes[] = {
/* 4 bit bus width */
{"mmc0", MAKE_CFGVAL(0x40, 0x30, 0x00, 0x00)},
{"mmc1", MAKE_CFGVAL(0x40, 0x38, 0x00, 0x00)},
{NULL, 0},
};
#endif
int misc_init_r(void)
{
gpio_request(RGB_BACKLIGHT_GP, "lvds backlight");
gpio_request(LVDS_BACKLIGHT_GP, "lvds backlight");
gpio_request(GP_USB_OTG_PWR, "usbotg power");
gpio_request(IMX_GPIO_NR(7, 12), "usbh1 hub reset");
gpio_request(IMX_GPIO_NR(2, 2), "back");
gpio_request(IMX_GPIO_NR(2, 4), "home");
gpio_request(IMX_GPIO_NR(2, 1), "menu");
gpio_request(IMX_GPIO_NR(2, 3), "search");
gpio_request(IMX_GPIO_NR(7, 13), "volup");
gpio_request(IMX_GPIO_NR(4, 5), "voldown");
#ifdef CONFIG_PREBOOT
preboot_keys();
#endif
#ifdef CONFIG_CMD_BMODE
add_board_boot_modes(board_boot_modes);
#endif
env_set_hex("reset_cause", get_imx_reset_cause());
return 0;
}