u-boot/board/siemens/draco/board.c
Simon Glass c05ed00afb common: Drop linux/delay.h from common header
Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 21:19:23 -04:00

388 lines
10 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Board functions for TI AM335X based draco board
* (C) Copyright 2013 Siemens Schweiz AG
* (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
*
* Based on:
*
* Board functions for TI AM335X based boards
* u-boot:/board/ti/am335x/board.c
*
* Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
*/
#include <common.h>
#include <command.h>
#include <env.h>
#include <errno.h>
#include <init.h>
#include <net.h>
#include <spl.h>
#include <asm/arch/cpu.h>
#include <asm/arch/hardware.h>
#include <asm/arch/omap.h>
#include <asm/arch/ddr_defs.h>
#include <asm/arch/clock.h>
#include <asm/arch/gpio.h>
#include <asm/arch/mmc_host_def.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/mem.h>
#include <asm/io.h>
#include <asm/emif.h>
#include <asm/gpio.h>
#include <i2c.h>
#include <miiphy.h>
#include <cpsw.h>
#include <watchdog.h>
#include <linux/delay.h>
#include "board.h"
#include "../common/factoryset.h"
#include <nand.h>
#ifdef CONFIG_SPL_BUILD
static struct draco_baseboard_id __attribute__((section(".data"))) settings;
#if DDR_PLL_FREQ == 303
#if !defined(CONFIG_TARGET_ETAMIN)
/* Default@303MHz-i0 */
const struct ddr3_data ddr3_default = {
0x33524444, 0x56312e35, 0x0080, 0x0000, 0x003A, 0x003F, 0x009F,
0x0079, 0x0888A39B, 0x26517FDA, 0x501F84EF, 0x00100206, 0x61A44A32,
0x0000093B, 0x0000014A,
"default name @303MHz \0",
"default marking \0",
};
#else
/* etamin board */
const struct ddr3_data ddr3_default = {
0x33524444, 0x56312e36, 0x0080, 0x0000, 0x003A, 0x0010, 0x009F,
0x0050, 0x0888A39B, 0x266D7FDA, 0x501F86AF, 0x00100206, 0x61A44BB2,
0x0000093B, 0x0000018A,
"test-etamin \0",
"generic-8Gbit \0",
};
#endif
#elif DDR_PLL_FREQ == 400
/* Default@400MHz-i0 */
const struct ddr3_data ddr3_default = {
0x33524444, 0x56312e35, 0x0080, 0x0000, 0x0039, 0x0046, 0x00ab,
0x0080, 0x0AAAA4DB, 0x26307FDA, 0x501F821F, 0x00100207, 0x61A45232,
0x00000618, 0x0000014A,
"default name @400MHz \0",
"default marking \0",
};
#endif
static void set_default_ddr3_timings(void)
{
printf("Set default DDR3 settings\n");
settings.ddr3 = ddr3_default;
}
static void print_ddr3_timings(void)
{
printf("\nDDR3\n");
printf("clock:\t\t%d MHz\n", DDR_PLL_FREQ);
printf("device:\t\t%s\n", settings.ddr3.manu_name);
printf("marking:\t%s\n", settings.ddr3.manu_marking);
printf("%-20s, %-8s, %-8s, %-4s\n", "timing parameters", "eeprom",
"default", "diff");
PRINTARGS(magic);
PRINTARGS(version);
PRINTARGS(ddr3_sratio);
PRINTARGS(iclkout);
PRINTARGS(dt0rdsratio0);
PRINTARGS(dt0wdsratio0);
PRINTARGS(dt0fwsratio0);
PRINTARGS(dt0wrsratio0);
PRINTARGS(sdram_tim1);
PRINTARGS(sdram_tim2);
PRINTARGS(sdram_tim3);
PRINTARGS(emif_ddr_phy_ctlr_1);
PRINTARGS(sdram_config);
PRINTARGS(ref_ctrl);
PRINTARGS(ioctr_val);
}
static void print_chip_data(void)
{
struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
dpll_mpu_opp100.m = am335x_get_efuse_mpu_max_freq(cdev);
printf("\nCPU BOARD\n");
printf("device: \t'%s'\n", settings.chip.sdevname);
printf("hw version: \t'%s'\n", settings.chip.shwver);
printf("max freq: \t%d MHz\n", dpll_mpu_opp100.m);
}
#endif /* CONFIG_SPL_BUILD */
#define AM335X_NAND_ECC_MASK 0x0f
#define AM335X_NAND_ECC_TYPE_16 0x02
static int ecc_type;
struct am335x_nand_geometry {
u32 magic;
u8 nand_geo_addr;
u8 nand_geo_page;
u8 nand_bus;
};
static int draco_read_nand_geometry(void)
{
struct am335x_nand_geometry geo;
/* Read NAND geometry */
if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0x80, 2,
(uchar *)&geo, sizeof(struct am335x_nand_geometry))) {
printf("Could not read the NAND geomtery; something fundamentally wrong on the I2C bus.\n");
return -EIO;
}
if (geo.magic != 0xa657b310) {
printf("%s: bad magic: %x\n", __func__, geo.magic);
return -EFAULT;
}
if ((geo.nand_bus & AM335X_NAND_ECC_MASK) == AM335X_NAND_ECC_TYPE_16)
ecc_type = 16;
else
ecc_type = 8;
return 0;
}
/*
* Read header information from EEPROM into global structure.
*/
static int read_eeprom(void)
{
/* Check if baseboard eeprom is available */
if (i2c_probe(CONFIG_SYS_I2C_EEPROM_ADDR)) {
printf("Could not probe the EEPROM; something fundamentally wrong on the I2C bus.\n");
return 1;
}
#ifdef CONFIG_SPL_BUILD
/* Read Siemens eeprom data (DDR3) */
if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, EEPROM_ADDR_DDR3, 2,
(uchar *)&settings.ddr3, sizeof(struct ddr3_data))) {
printf("Could not read the EEPROM; something fundamentally wrong on the I2C bus.\nUse default DDR3 timings\n");
set_default_ddr3_timings();
}
/* Read Siemens eeprom data (CHIP) */
if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, EEPROM_ADDR_CHIP, 2,
(uchar *)&settings.chip, sizeof(settings.chip)))
printf("Could not read chip settings\n");
if (ddr3_default.magic == settings.ddr3.magic &&
ddr3_default.version == settings.ddr3.version) {
printf("Using DDR3 settings from EEPROM\n");
} else {
if (ddr3_default.magic != settings.ddr3.magic)
printf("Warning: No valid DDR3 data in eeprom.\n");
if (ddr3_default.version != settings.ddr3.version)
printf("Warning: DDR3 data version does not match.\n");
printf("Using default settings\n");
set_default_ddr3_timings();
}
if (MAGIC_CHIP == settings.chip.magic)
print_chip_data();
else
printf("Warning: No chip data in eeprom\n");
print_ddr3_timings();
return draco_read_nand_geometry();
#endif
return 0;
}
#ifdef CONFIG_SPL_BUILD
static void board_init_ddr(void)
{
struct emif_regs draco_ddr3_emif_reg_data = {
.zq_config = 0x50074BE4,
};
struct ddr_data draco_ddr3_data = {
};
struct cmd_control draco_ddr3_cmd_ctrl_data = {
};
struct ctrl_ioregs draco_ddr3_ioregs = {
};
/* pass values from eeprom */
draco_ddr3_emif_reg_data.sdram_tim1 = settings.ddr3.sdram_tim1;
draco_ddr3_emif_reg_data.sdram_tim2 = settings.ddr3.sdram_tim2;
draco_ddr3_emif_reg_data.sdram_tim3 = settings.ddr3.sdram_tim3;
draco_ddr3_emif_reg_data.emif_ddr_phy_ctlr_1 =
settings.ddr3.emif_ddr_phy_ctlr_1;
draco_ddr3_emif_reg_data.sdram_config = settings.ddr3.sdram_config;
draco_ddr3_emif_reg_data.sdram_config2 = 0x08000000;
draco_ddr3_emif_reg_data.ref_ctrl = settings.ddr3.ref_ctrl;
draco_ddr3_data.datardsratio0 = settings.ddr3.dt0rdsratio0;
draco_ddr3_data.datawdsratio0 = settings.ddr3.dt0wdsratio0;
draco_ddr3_data.datafwsratio0 = settings.ddr3.dt0fwsratio0;
draco_ddr3_data.datawrsratio0 = settings.ddr3.dt0wrsratio0;
draco_ddr3_cmd_ctrl_data.cmd0csratio = settings.ddr3.ddr3_sratio;
draco_ddr3_cmd_ctrl_data.cmd0iclkout = settings.ddr3.iclkout;
draco_ddr3_cmd_ctrl_data.cmd1csratio = settings.ddr3.ddr3_sratio;
draco_ddr3_cmd_ctrl_data.cmd1iclkout = settings.ddr3.iclkout;
draco_ddr3_cmd_ctrl_data.cmd2csratio = settings.ddr3.ddr3_sratio;
draco_ddr3_cmd_ctrl_data.cmd2iclkout = settings.ddr3.iclkout;
draco_ddr3_ioregs.cm0ioctl = settings.ddr3.ioctr_val,
draco_ddr3_ioregs.cm1ioctl = settings.ddr3.ioctr_val,
draco_ddr3_ioregs.cm2ioctl = settings.ddr3.ioctr_val,
draco_ddr3_ioregs.dt0ioctl = settings.ddr3.ioctr_val,
draco_ddr3_ioregs.dt1ioctl = settings.ddr3.ioctr_val,
config_ddr(DDR_PLL_FREQ, &draco_ddr3_ioregs, &draco_ddr3_data,
&draco_ddr3_cmd_ctrl_data, &draco_ddr3_emif_reg_data, 0);
}
static void spl_siemens_board_init(void)
{
return;
}
#endif /* if def CONFIG_SPL_BUILD */
#ifdef CONFIG_BOARD_LATE_INIT
int board_late_init(void)
{
int ret;
ret = draco_read_nand_geometry();
if (ret != 0)
return ret;
nand_curr_device = 0;
omap_nand_switch_ecc(1, ecc_type);
#ifdef CONFIG_TARGET_ETAMIN
nand_curr_device = 1;
omap_nand_switch_ecc(1, ecc_type);
#endif
#ifdef CONFIG_FACTORYSET
/* Set ASN in environment*/
if (factory_dat.asn[0] != 0) {
env_set("dtb_name", (char *)factory_dat.asn);
} else {
/* dtb suffix gets added in load script */
env_set("dtb_name", "am335x-draco");
}
#else
env_set("dtb_name", "am335x-draco");
#endif
return 0;
}
#endif
#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \
(defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD))
static void cpsw_control(int enabled)
{
/* VTP can be added here */
return;
}
static struct cpsw_slave_data cpsw_slaves[] = {
{
.slave_reg_ofs = 0x208,
.sliver_reg_ofs = 0xd80,
.phy_addr = 0,
.phy_if = PHY_INTERFACE_MODE_MII,
},
};
static struct cpsw_platform_data cpsw_data = {
.mdio_base = CPSW_MDIO_BASE,
.cpsw_base = CPSW_BASE,
.mdio_div = 0xff,
.channels = 4,
.cpdma_reg_ofs = 0x800,
.slaves = 1,
.slave_data = cpsw_slaves,
.ale_reg_ofs = 0xd00,
.ale_entries = 1024,
.host_port_reg_ofs = 0x108,
.hw_stats_reg_ofs = 0x900,
.bd_ram_ofs = 0x2000,
.mac_control = (1 << 5),
.control = cpsw_control,
.host_port_num = 0,
.version = CPSW_CTRL_VERSION_2,
};
#if defined(CONFIG_DRIVER_TI_CPSW) || \
(defined(CONFIG_USB_ETHER) && defined(CONFIG_USB_MUSB_GADGET))
int board_eth_init(bd_t *bis)
{
struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
int n = 0;
int rv;
factoryset_env_set();
/* Set rgmii mode and enable rmii clock to be sourced from chip */
writel((RMII_MODE_ENABLE | RMII_CHIPCKL_ENABLE), &cdev->miisel);
rv = cpsw_register(&cpsw_data);
if (rv < 0)
printf("Error %d registering CPSW switch\n", rv);
else
n += rv;
return n;
}
static int do_switch_reset(struct cmd_tbl *cmdtp, int flag, int argc,
char *const argv[])
{
/* Reset SMSC LAN9303 switch for default configuration */
gpio_request(GPIO_LAN9303_NRST, "nRST");
gpio_direction_output(GPIO_LAN9303_NRST, 0);
/* assert active low reset for 200us */
udelay(200);
gpio_set_value(GPIO_LAN9303_NRST, 1);
return 0;
};
U_BOOT_CMD(
switch_rst, CONFIG_SYS_MAXARGS, 1, do_switch_reset,
"Reset LAN9303 switch via its reset pin",
""
);
#endif /* #if defined(CONFIG_DRIVER_TI_CPSW) */
#endif /* #if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) */
#ifdef CONFIG_NAND_CS_INIT
/* GPMC definitions for second nand cs1 */
static const u32 gpmc_nand_config[] = {
ETAMIN_NAND_GPMC_CONFIG1,
ETAMIN_NAND_GPMC_CONFIG2,
ETAMIN_NAND_GPMC_CONFIG3,
ETAMIN_NAND_GPMC_CONFIG4,
ETAMIN_NAND_GPMC_CONFIG5,
ETAMIN_NAND_GPMC_CONFIG6,
/*CONFIG7- computed as params */
};
static void board_nand_cs_init(void)
{
enable_gpmc_cs_config(gpmc_nand_config, &gpmc_cfg->cs[1],
0x18000000, GPMC_SIZE_16M);
}
#endif
#include "../common/board.c"