mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-14 17:07:38 +00:00
0aee53bacc
SMDK5250 board is based on Samsungs EXYNOS5250 SoC. Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
451 lines
12 KiB
C
451 lines
12 KiB
C
/*
|
|
* Machine Specific Values for SMDK5250 board based on S5PC520
|
|
*
|
|
* Copyright (C) 2012 Samsung Electronics
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#ifndef _SMDK5250_SETUP_H
|
|
#define _SMDK5250_SETUP_H
|
|
|
|
#include <config.h>
|
|
#include <version.h>
|
|
#include <asm/arch/cpu.h>
|
|
|
|
/* GPIO Offsets for UART: GPIO Contol Register */
|
|
#define EXYNOS5_GPIO_A0_CON_OFFSET 0x0
|
|
#define EXYNOS5_GPIO_A1_CON_OFFSET 0x20
|
|
|
|
/* TZPC : Register Offsets */
|
|
#define TZPC0_BASE 0x10100000
|
|
#define TZPC1_BASE 0x10110000
|
|
#define TZPC2_BASE 0x10120000
|
|
#define TZPC3_BASE 0x10130000
|
|
#define TZPC4_BASE 0x10140000
|
|
#define TZPC5_BASE 0x10150000
|
|
#define TZPC6_BASE 0x10160000
|
|
#define TZPC7_BASE 0x10170000
|
|
#define TZPC8_BASE 0x10180000
|
|
#define TZPC9_BASE 0x10190000
|
|
|
|
/* CLK_SRC_CPU */
|
|
/* 0 = MOUTAPLL, 1 = SCLKMPLL */
|
|
#define MUX_HPM_SEL 0
|
|
#define MUX_CPU_SEL 0
|
|
#define MUX_APLL_SEL 1
|
|
#define CLK_SRC_CPU_VAL ((MUX_HPM_SEL << 20) \
|
|
| (MUX_CPU_SEL << 16) \
|
|
| (MUX_APLL_SEL))
|
|
|
|
/* CLK_DIV_CPU0 */
|
|
#define ARM2_RATIO 0x0
|
|
#define APLL_RATIO 0x1
|
|
#define PCLK_DBG_RATIO 0x1
|
|
#define ATB_RATIO 0x4
|
|
#define PERIPH_RATIO 0x7
|
|
#define ACP_RATIO 0x7
|
|
#define CPUD_RATIO 0x2
|
|
#define ARM_RATIO 0x0
|
|
#define CLK_DIV_CPU0_VAL ((ARM2_RATIO << 28) \
|
|
| (APLL_RATIO << 24) \
|
|
| (PCLK_DBG_RATIO << 20) \
|
|
| (ATB_RATIO << 16) \
|
|
| (PERIPH_RATIO << 12) \
|
|
| (ACP_RATIO << 8) \
|
|
| (CPUD_RATIO << 4) \
|
|
| (ARM_RATIO))
|
|
|
|
/* CLK_DIV_CPU1 */
|
|
#define HPM_RATIO 0x4
|
|
#define COPY_RATIO 0x0
|
|
#define CLK_DIV_CPU1_VAL ((HPM_RATIO << 4) \
|
|
| (COPY_RATIO))
|
|
|
|
#define APLL_MDIV 0x7D
|
|
#define APLL_PDIV 0x3
|
|
#define APLL_SDIV 0x0
|
|
|
|
#define MPLL_MDIV 0x64
|
|
#define MPLL_PDIV 0x3
|
|
#define MPLL_SDIV 0x0
|
|
|
|
#define CPLL_MDIV 0x96
|
|
#define CPLL_PDIV 0x4
|
|
#define CPLL_SDIV 0x0
|
|
|
|
/* APLL_CON1 */
|
|
#define APLL_CON1_VAL (0x00203800)
|
|
|
|
/* MPLL_CON1 */
|
|
#define MPLL_CON1_VAL (0x00203800)
|
|
|
|
/* CPLL_CON1 */
|
|
#define CPLL_CON1_VAL (0x00203800)
|
|
|
|
#define EPLL_MDIV 0x60
|
|
#define EPLL_PDIV 0x3
|
|
#define EPLL_SDIV 0x3
|
|
|
|
#define EPLL_CON1_VAL 0x00000000
|
|
#define EPLL_CON2_VAL 0x00000080
|
|
|
|
#define VPLL_MDIV 0x96
|
|
#define VPLL_PDIV 0x3
|
|
#define VPLL_SDIV 0x2
|
|
|
|
#define VPLL_CON1_VAL 0x00000000
|
|
#define VPLL_CON2_VAL 0x00000080
|
|
|
|
#define BPLL_MDIV 0x215
|
|
#define BPLL_PDIV 0xC
|
|
#define BPLL_SDIV 0x1
|
|
|
|
#define BPLL_CON1_VAL 0x00203800
|
|
|
|
/* Set PLL */
|
|
#define set_pll(mdiv, pdiv, sdiv) (1<<31 | mdiv<<16 | pdiv<<8 | sdiv)
|
|
|
|
#define APLL_CON0_VAL set_pll(APLL_MDIV, APLL_PDIV, APLL_SDIV)
|
|
#define MPLL_CON0_VAL set_pll(MPLL_MDIV, MPLL_PDIV, MPLL_SDIV)
|
|
#define CPLL_CON0_VAL set_pll(CPLL_MDIV, CPLL_PDIV, CPLL_SDIV)
|
|
#define EPLL_CON0_VAL set_pll(EPLL_MDIV, EPLL_PDIV, EPLL_SDIV)
|
|
#define VPLL_CON0_VAL set_pll(VPLL_MDIV, VPLL_PDIV, VPLL_SDIV)
|
|
#define BPLL_CON0_VAL set_pll(BPLL_MDIV, BPLL_PDIV, BPLL_SDIV)
|
|
|
|
/* CLK_SRC_CORE0 */
|
|
#define CLK_SRC_CORE0_VAL 0x00060000
|
|
|
|
/* CLK_SRC_CORE1 */
|
|
#define CLK_SRC_CORE1_VAL 0x100
|
|
|
|
/* CLK_DIV_CORE0 */
|
|
#define CLK_DIV_CORE0_VAL 0x120000
|
|
|
|
/* CLK_DIV_CORE1 */
|
|
#define CLK_DIV_CORE1_VAL 0x07070700
|
|
|
|
/* CLK_SRC_CDREX */
|
|
#define CLK_SRC_CDREX_INIT_VAL 0x1
|
|
#define CLK_SRC_CDREX_VAL 0x111
|
|
|
|
/* CLK_DIV_CDREX */
|
|
#define CLK_DIV_CDREX_INIT_VAL 0x71771111
|
|
|
|
#define MCLK_CDREX2_RATIO 0x0
|
|
#define ACLK_EFCON_RATIO 0x1
|
|
#define MCLK_DPHY_RATIO 0x0
|
|
#define MCLK_CDREX_RATIO 0x0
|
|
#define ACLK_C2C_200_RATIO 0x1
|
|
#define C2C_CLK_400_RATIO 0x1
|
|
#define PCLK_CDREX_RATIO 0x3
|
|
#define ACLK_CDREX_RATIO 0x1
|
|
#define CLK_DIV_CDREX_VAL ((MCLK_DPHY_RATIO << 20) \
|
|
| (MCLK_CDREX_RATIO << 16) \
|
|
| (ACLK_C2C_200_RATIO << 12) \
|
|
| (C2C_CLK_400_RATIO << 8) \
|
|
| (PCLK_CDREX_RATIO << 4) \
|
|
| (ACLK_CDREX_RATIO))
|
|
|
|
#define MCLK_EFPHY_RATIO 0x4
|
|
#define CLK_DIV_CDREX2_VAL MCLK_EFPHY_RATIO
|
|
|
|
/* CLK_DIV_ACP */
|
|
#define CLK_DIV_ACP_VAL 0x12
|
|
|
|
/* CLK_SRC_TOP0 */
|
|
#define MUX_ACLK_300_GSCL_SEL 0x1
|
|
#define MUX_ACLK_300_GSCL_MID_SEL 0x0
|
|
#define MUX_ACLK_400_SEL 0x0
|
|
#define MUX_ACLK_333_SEL 0x0
|
|
#define MUX_ACLK_300_DISP1_SEL 0x1
|
|
#define MUX_ACLK_300_DISP1_MID_SEL 0x0
|
|
#define MUX_ACLK_200_SEL 0x0
|
|
#define MUX_ACLK_166_SEL 0x0
|
|
#define CLK_SRC_TOP0_VAL ((MUX_ACLK_300_GSCL_SEL << 25) \
|
|
| (MUX_ACLK_300_GSCL_MID_SEL << 24) \
|
|
| (MUX_ACLK_400_SEL << 20) \
|
|
| (MUX_ACLK_333_SEL << 16) \
|
|
| (MUX_ACLK_300_DISP1_SEL << 15) \
|
|
| (MUX_ACLK_300_DISP1_MID_SEL << 14) \
|
|
| (MUX_ACLK_200_SEL << 12) \
|
|
| (MUX_ACLK_166_SEL << 8))
|
|
|
|
/* CLK_SRC_TOP1 */
|
|
#define MUX_ACLK_400_ISP_SEL 0x0
|
|
#define MUX_ACLK_400_IOP_SEL 0x0
|
|
#define MUX_ACLK_MIPI_HSI_TXBASE_SEL 0x0
|
|
#define CLK_SRC_TOP1_VAL ((MUX_ACLK_400_ISP_SEL << 24) \
|
|
|(MUX_ACLK_400_IOP_SEL << 20) \
|
|
|(MUX_ACLK_MIPI_HSI_TXBASE_SEL << 16))
|
|
|
|
/* CLK_SRC_TOP2 */
|
|
#define MUX_BPLL_USER_SEL 0x1
|
|
#define MUX_MPLL_USER_SEL 0x1
|
|
#define MUX_VPLL_SEL 0x0
|
|
#define MUX_EPLL_SEL 0x0
|
|
#define MUX_CPLL_SEL 0x0
|
|
#define VPLLSRC_SEL 0x0
|
|
#define CLK_SRC_TOP2_VAL ((MUX_BPLL_USER_SEL << 24) \
|
|
| (MUX_MPLL_USER_SEL << 20) \
|
|
| (MUX_VPLL_SEL << 16) \
|
|
| (MUX_EPLL_SEL << 12) \
|
|
| (MUX_CPLL_SEL << 8) \
|
|
| (VPLLSRC_SEL))
|
|
/* CLK_SRC_TOP3 */
|
|
#define MUX_ACLK_333_SUB_SEL 0x1
|
|
#define MUX_ACLK_400_SUB_SEL 0x1
|
|
#define MUX_ACLK_266_ISP_SUB_SEL 0x1
|
|
#define MUX_ACLK_266_GPS_SUB_SEL 0x1
|
|
#define MUX_ACLK_300_GSCL_SUB_SEL 0x1
|
|
#define MUX_ACLK_266_GSCL_SUB_SEL 0x1
|
|
#define MUX_ACLK_300_DISP1_SUB_SEL 0x1
|
|
#define MUX_ACLK_200_DISP1_SUB_SEL 0x1
|
|
#define CLK_SRC_TOP3_VAL ((MUX_ACLK_333_SUB_SEL << 24) \
|
|
| (MUX_ACLK_400_SUB_SEL << 20) \
|
|
| (MUX_ACLK_266_ISP_SUB_SEL << 16) \
|
|
| (MUX_ACLK_266_GPS_SUB_SEL << 12) \
|
|
| (MUX_ACLK_300_GSCL_SUB_SEL << 10) \
|
|
| (MUX_ACLK_266_GSCL_SUB_SEL << 8) \
|
|
| (MUX_ACLK_300_DISP1_SUB_SEL << 6) \
|
|
| (MUX_ACLK_200_DISP1_SUB_SEL << 4))
|
|
|
|
/* CLK_DIV_TOP0 */
|
|
#define ACLK_300_RATIO 0x0
|
|
#define ACLK_400_RATIO 0x3
|
|
#define ACLK_333_RATIO 0x2
|
|
#define ACLK_266_RATIO 0x2
|
|
#define ACLK_200_RATIO 0x3
|
|
#define ACLK_166_RATIO 0x5
|
|
#define ACLK_133_RATIO 0x1
|
|
#define ACLK_66_RATIO 0x5
|
|
#define CLK_DIV_TOP0_VAL ((ACLK_300_RATIO << 28) \
|
|
| (ACLK_400_RATIO << 24) \
|
|
| (ACLK_333_RATIO << 20) \
|
|
| (ACLK_266_RATIO << 16) \
|
|
| (ACLK_200_RATIO << 12) \
|
|
| (ACLK_166_RATIO << 8) \
|
|
| (ACLK_133_RATIO << 4) \
|
|
| (ACLK_66_RATIO))
|
|
|
|
/* CLK_DIV_TOP1 */
|
|
#define ACLK_MIPI_HSI_TX_BASE_RATIO 0x3
|
|
#define ACLK_66_PRE_RATIO 0x1
|
|
#define ACLK_400_ISP_RATIO 0x1
|
|
#define ACLK_400_IOP_RATIO 0x1
|
|
#define ACLK_300_GSCL_RATIO 0x0
|
|
#define ACLK_266_GPS_RATIO 0x7
|
|
|
|
#define CLK_DIV_TOP1_VAL ((ACLK_MIPI_HSI_TX_BASE_RATIO << 28) \
|
|
| (ACLK_66_PRE_RATIO << 24) \
|
|
| (ACLK_400_ISP_RATIO << 20) \
|
|
| (ACLK_400_IOP_RATIO << 16) \
|
|
| (ACLK_300_GSCL_RATIO << 12) \
|
|
| (ACLK_266_GPS_RATIO << 8))
|
|
|
|
/* APLL_LOCK */
|
|
#define APLL_LOCK_VAL (0x3E8)
|
|
/* MPLL_LOCK */
|
|
#define MPLL_LOCK_VAL (0x2F1)
|
|
/* CPLL_LOCK */
|
|
#define CPLL_LOCK_VAL (0x3E8)
|
|
/* EPLL_LOCK */
|
|
#define EPLL_LOCK_VAL (0x2321)
|
|
/* VPLL_LOCK */
|
|
#define VPLL_LOCK_VAL (0x2321)
|
|
/* BPLL_LOCK */
|
|
#define BPLL_LOCK_VAL (0x3E8)
|
|
|
|
/* CLK_SRC_PERIC0 */
|
|
/* SRC_CLOCK = SCLK_MPLL */
|
|
#define PWM_SEL 0
|
|
#define UART4_SEL 6
|
|
#define UART3_SEL 6
|
|
#define UART2_SEL 6
|
|
#define UART1_SEL 6
|
|
#define UART0_SEL 6
|
|
#define CLK_SRC_PERIC0_VAL ((PWM_SEL << 24) \
|
|
| (UART4_SEL << 16) \
|
|
| (UART3_SEL << 12) \
|
|
| (UART2_SEL << 8) \
|
|
| (UART1_SEL << 4) \
|
|
| (UART0_SEL << 0))
|
|
|
|
#define CLK_SRC_FSYS_VAL 0x66666
|
|
#define CLK_DIV_FSYS0_VAL 0x0BB00000
|
|
#define CLK_DIV_FSYS1_VAL 0x000f000f
|
|
#define CLK_DIV_FSYS2_VAL 0x020f020f
|
|
#define CLK_DIV_FSYS3_VAL 0x000f
|
|
|
|
/* CLK_DIV_PERIC0 */
|
|
#define UART5_RATIO 8
|
|
#define UART4_RATIO 8
|
|
#define UART3_RATIO 8
|
|
#define UART2_RATIO 8
|
|
#define UART1_RATIO 8
|
|
#define UART0_RATIO 8
|
|
#define CLK_DIV_PERIC0_VAL ((UART4_RATIO << 16) \
|
|
| (UART3_RATIO << 12) \
|
|
| (UART2_RATIO << 8) \
|
|
| (UART1_RATIO << 4) \
|
|
| (UART0_RATIO << 0))
|
|
|
|
/* CLK_DIV_PERIC3 */
|
|
#define PWM_RATIO 8
|
|
#define CLK_DIV_PERIC3_VAL (PWM_RATIO << 0)
|
|
|
|
/* CLK_SRC_LEX */
|
|
#define CLK_SRC_LEX_VAL 0x0
|
|
|
|
/* CLK_DIV_LEX */
|
|
#define CLK_DIV_LEX_VAL 0x10
|
|
|
|
/* CLK_DIV_R0X */
|
|
#define CLK_DIV_R0X_VAL 0x10
|
|
|
|
/* CLK_DIV_L0X */
|
|
#define CLK_DIV_R1X_VAL 0x10
|
|
|
|
/* SCLK_SRC_ISP */
|
|
#define SCLK_SRC_ISP_VAL 0x600
|
|
/* CLK_DIV_ISP0 */
|
|
#define CLK_DIV_ISP0_VAL 0x31
|
|
|
|
/* CLK_DIV_ISP1 */
|
|
#define CLK_DIV_ISP1_VAL 0x0
|
|
|
|
/* CLK_DIV_ISP2 */
|
|
#define CLK_DIV_ISP2_VAL 0x1
|
|
|
|
#define MPLL_DEC (MPLL_MDIV * MPLL_MDIV / (MPLL_PDIV * 2^(MPLL_SDIV-1)))
|
|
|
|
/*
|
|
* TZPC Register Value :
|
|
* R0SIZE: 0x0 : Size of secured ram
|
|
*/
|
|
#define R0SIZE 0x0
|
|
|
|
/*
|
|
* TZPC Decode Protection Register Value :
|
|
* DECPROTXSET: 0xFF : Set Decode region to non-secure
|
|
*/
|
|
#define DECPROTXSET 0xFF
|
|
|
|
/* DMC Init */
|
|
#define SET 1
|
|
#define RESET 0
|
|
/* (Memory Interleaving Size = 1 << IV_SIZE) */
|
|
#define CONFIG_IV_SIZE 0x07
|
|
|
|
#define PHY_RESET_VAL (0 << 0)
|
|
|
|
/*ZQ Configurations */
|
|
#define PHY_CON16_RESET_VAL 0x08000304
|
|
|
|
#define ZQ_MODE_DDS_VAL (0x5 << 24)
|
|
#define ZQ_MODE_TERM_VAL (0x5 << 21)
|
|
#define SET_ZQ_MODE_DDS_VAL(x) (x = (x & ~(0x7 << 24)) | ZQ_MODE_DDS_VAL)
|
|
#define SET_ZQ_MODE_TERM_VAL(x) (x = (x & ~(0x7 << 21)) | ZQ_MODE_TERM_VAL)
|
|
|
|
#define ZQ_MODE_NOTERM (1 << 19)
|
|
#define ZQ_CLK_DIV_EN (1 << 18)
|
|
#define ZQ_MANUAL_STR (1 << 1)
|
|
|
|
/* Channel and Chip Selection */
|
|
#define CONFIG_DMC_CHANNELS 2
|
|
#define CONFIG_CHIPS_PER_CHANNEL 2
|
|
|
|
#define SET_CMD_CHANNEL(x, y) (x = (x & ~(1 << 28)) | y << 28)
|
|
#define SET_CMD_CHIP(x, y) (x = (x & ~(1 << 20)) | y << 20)
|
|
|
|
/* Diret Command */
|
|
#define DIRECT_CMD_NOP 0x07000000
|
|
#define DIRECT_CMD_MRS1 0x00071C00
|
|
#define DIRECT_CMD_MRS2 0x00010BFC
|
|
#define DIRECT_CMD_MRS3 0x00000708
|
|
#define DIRECT_CMD_MRS4 0x00000818
|
|
#define DIRECT_CMD_PALL 0x01000000
|
|
|
|
/* DLL Resync */
|
|
#define FP_RSYNC (1 << 3)
|
|
|
|
#define CONFIG_CTRL_DLL_ON(x, y) (x = (x & ~(1 << 5)) | y << 5)
|
|
#define CONFIG_CTRL_START(x, y) (x = (x & ~(1 << 6)) | y << 6)
|
|
#define SET_CTRL_FORCE_VAL(x, y) (x = (x & ~(0x7F << 8)) | y << 8)
|
|
|
|
/* RDLVL */
|
|
#define PHY_CON0_RESET_VAL 0x17023240
|
|
#define DDR_MODE_LPDDR2 0x2
|
|
#define BYTE_RDLVL_EN (1 << 13)
|
|
#define CTRL_ATGATE (1 << 6)
|
|
#define SET_CTRL_DDR_MODE(x, y) (x = (x & ~(0x3 << 11)) | y << 11)
|
|
|
|
#define PHY_CON1_RESET_VAL 0x9210100
|
|
#define RDLVL_RDDATAPADJ 0x1
|
|
#define SET_RDLVL_RDDATAPADJ ((PHY_CON1_RESET_VAL & ~(0xFFFF << 0))\
|
|
| RDLVL_RDDATAPADJ << 0)
|
|
|
|
#define PHY_CON2_RESET_VAL 0x00010004
|
|
#define RDLVL_EN (1 << 25)
|
|
#define RDDSKEW_CLEAR (1 << 13)
|
|
|
|
#define CTRL_RDLVL_DATA_EN (1 << 1)
|
|
#define LPDDR2_ADDR 0x00000208
|
|
|
|
#define DMC_MEMCONFIG0_VAL 0x00001323
|
|
#define DMC_MEMCONFIG1_VAL 0x00001323
|
|
#define DMC_MEMBASECONFIG0_VAL 0x00400780
|
|
#define DMC_MEMBASECONFIG1_VAL 0x00800780
|
|
#define DMC_MEMCONTROL_VAL 0x00212500
|
|
#define DMC_PRECHCONFIG_VAL 0xFF000000
|
|
#define DMC_PWRDNCONFIG_VAL 0xFFFF00FF
|
|
#define DMC_TIMINGREF_VAL 0x0000005D
|
|
#define DMC_TIMINGROW_VAL 0x2336544C
|
|
#define DMC_TIMINGDATA_VAL 0x24202408
|
|
#define DMC_TIMINGPOWER_VAL 0x38260235
|
|
|
|
#define CTRL_BSTLEN 0x04
|
|
#define CTRL_RDLAT 0x08
|
|
#define PHY_CON42_VAL (CTRL_BSTLEN << 8 | CTRL_RDLAT << 0)
|
|
|
|
/* DQS, DQ, DEBUG offsets */
|
|
#define SET_DQS_OFFSET_VAL 0x7F7F7F7F
|
|
#define SET_DQ_OFFSET_VAL 0x7F7F7F7F
|
|
#define SET_DEBUG_OFFSET_VAL 0x7F
|
|
|
|
#define RESET_DQS_OFFSET_VAL 0x08080808
|
|
#define RESET_DQ_OFFSET_VAL 0x08080808
|
|
#define RESET_DEBUG_OFFSET_VAL 0x8
|
|
|
|
#define CTRL_PULLD_DQ (0x0F << 8)
|
|
#define CTRL_PULLD_DQS (0x0F << 0)
|
|
|
|
#define DFI_INIT_START (1 << 28)
|
|
|
|
#define CLK_STOP_EN (1 << 0)
|
|
#define DPWRDN_EN (1 << 1)
|
|
#define DSREF_EN (1 << 5)
|
|
|
|
#define AREF_EN (1 << 5)
|
|
void sdelay(unsigned long);
|
|
void mem_ctrl_init(void);
|
|
void system_clock_init(void);
|
|
void tzpc_init(void);
|
|
|
|
#endif
|