mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-12 06:12:58 +00:00
c008280a9a
The .supports_op() callback function returns true by default after
performing driver-specific checks. Therefore the driver cannot apply
the buswidth in devicetree.
Call spi_mem_default_supports_op() helper to handle the buswidth
in devicetree.
Fixes: 358f803ae2
("spi: Add Socionext F_OSPI SPI flash controller driver")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
686 lines
16 KiB
C
686 lines
16 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Socionext SPI flash controller F_OSPI driver
|
|
* Copyright (C) 2021 Socionext Inc.
|
|
*/
|
|
|
|
#include <clk.h>
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <dm/device_compat.h>
|
|
#include <linux/bitfield.h>
|
|
#include <linux/io.h>
|
|
#include <linux/iopoll.h>
|
|
#include <spi.h>
|
|
#include <spi-mem.h>
|
|
|
|
/* Registers */
|
|
#define OSPI_PROT_CTL_INDIR 0x00
|
|
#define OSPI_PROT_MODE_DATA_MASK GENMASK(31, 30)
|
|
#define OSPI_PROT_MODE_ALT_MASK GENMASK(29, 28)
|
|
#define OSPI_PROT_MODE_ADDR_MASK GENMASK(27, 26)
|
|
#define OSPI_PROT_MODE_CODE_MASK GENMASK(25, 24)
|
|
#define OSPI_PROT_MODE_SINGLE 0
|
|
#define OSPI_PROT_MODE_DUAL 1
|
|
#define OSPI_PROT_MODE_QUAD 2
|
|
#define OSPI_PROT_MODE_OCTAL 3
|
|
#define OSPI_PROT_DATA_RATE_DATA BIT(23)
|
|
#define OSPI_PROT_DATA_RATE_ALT BIT(22)
|
|
#define OSPI_PROT_DATA_RATE_ADDR BIT(21)
|
|
#define OSPI_PROT_DATA_RATE_CODE BIT(20)
|
|
#define OSPI_PROT_SDR 0
|
|
#define OSPI_PROT_DDR 1
|
|
#define OSPI_PROT_BIT_POS_DATA BIT(19)
|
|
#define OSPI_PROT_BIT_POS_ALT BIT(18)
|
|
#define OSPI_PROT_BIT_POS_ADDR BIT(17)
|
|
#define OSPI_PROT_BIT_POS_CODE BIT(16)
|
|
#define OSPI_PROT_SAMP_EDGE BIT(12)
|
|
#define OSPI_PROT_DATA_UNIT_MASK GENMASK(11, 10)
|
|
#define OSPI_PROT_DATA_UNIT_1B 0
|
|
#define OSPI_PROT_DATA_UNIT_2B 1
|
|
#define OSPI_PROT_DATA_UNIT_4B 3
|
|
#define OSPI_PROT_TRANS_DIR_WRITE BIT(9)
|
|
#define OSPI_PROT_DATA_EN BIT(8)
|
|
#define OSPI_PROT_ALT_SIZE_MASK GENMASK(7, 5)
|
|
#define OSPI_PROT_ADDR_SIZE_MASK GENMASK(4, 2)
|
|
#define OSPI_PROT_CODE_SIZE_MASK GENMASK(1, 0)
|
|
|
|
#define OSPI_CLK_CTL 0x10
|
|
#define OSPI_CLK_CTL_BOOT_INT_CLK_EN BIT(16)
|
|
#define OSPI_CLK_CTL_PHA BIT(12)
|
|
#define OSPI_CLK_CTL_PHA_180 0
|
|
#define OSPI_CLK_CTL_PHA_90 1
|
|
#define OSPI_CLK_CTL_DIV GENMASK(9, 8)
|
|
#define OSPI_CLK_CTL_DIV_1 0
|
|
#define OSPI_CLK_CTL_DIV_2 1
|
|
#define OSPI_CLK_CTL_DIV_4 2
|
|
#define OSPI_CLK_CTL_DIV_8 3
|
|
#define OSPI_CLK_CTL_INT_CLK_EN BIT(0)
|
|
|
|
#define OSPI_CS_CTL1 0x14
|
|
#define OSPI_CS_CTL2 0x18
|
|
#define OSPI_SSEL 0x20
|
|
#define OSPI_CMD_IDX_INDIR 0x40
|
|
#define OSPI_ADDR 0x50
|
|
#define OSPI_ALT_INDIR 0x60
|
|
#define OSPI_DMY_INDIR 0x70
|
|
#define OSPI_DAT 0x80
|
|
#define OSPI_DAT_SWP_INDIR 0x90
|
|
|
|
#define OSPI_DAT_SIZE_INDIR 0xA0
|
|
#define OSPI_DAT_SIZE_EN BIT(15)
|
|
#define OSPI_DAT_SIZE_MASK GENMASK(10, 0)
|
|
#define OSPI_DAT_SIZE_MAX (OSPI_DAT_SIZE_MASK + 1)
|
|
|
|
#define OSPI_TRANS_CTL 0xC0
|
|
#define OSPI_TRANS_CTL_STOP_REQ BIT(1) /* RW1AC */
|
|
#define OSPI_TRANS_CTL_START_REQ BIT(0) /* RW1AC */
|
|
|
|
#define OSPI_ACC_MODE 0xC4
|
|
#define OSPI_ACC_MODE_BOOT_DISABLE BIT(0)
|
|
|
|
#define OSPI_SWRST 0xD0
|
|
#define OSPI_SWRST_INDIR_WRITE_FIFO BIT(9) /* RW1AC */
|
|
#define OSPI_SWRST_INDIR_READ_FIFO BIT(8) /* RW1AC */
|
|
|
|
#define OSPI_STAT 0xE0
|
|
#define OSPI_STAT_IS_AXI_WRITING BIT(10)
|
|
#define OSPI_STAT_IS_AXI_READING BIT(9)
|
|
#define OSPI_STAT_IS_SPI_INT_CLK_STOP BIT(4)
|
|
#define OSPI_STAT_IS_SPI_IDLE BIT(3)
|
|
|
|
#define OSPI_IRQ 0xF0
|
|
#define OSPI_IRQ_CS_DEASSERT BIT(8)
|
|
#define OSPI_IRQ_WRITE_BUF_READY BIT(2)
|
|
#define OSPI_IRQ_READ_BUF_READY BIT(1)
|
|
#define OSPI_IRQ_CS_TRANS_COMP BIT(0)
|
|
#define OSPI_IRQ_ALL \
|
|
(OSPI_IRQ_CS_DEASSERT | OSPI_IRQ_WRITE_BUF_READY \
|
|
| OSPI_IRQ_READ_BUF_READY | OSPI_IRQ_CS_TRANS_COMP)
|
|
|
|
#define OSPI_IRQ_STAT_EN 0xF4
|
|
#define OSPI_IRQ_SIG_EN 0xF8
|
|
|
|
/* Parameters */
|
|
#define OSPI_NUM_CS 4
|
|
#define OSPI_DUMMY_CYCLE_MAX 255
|
|
#define OSPI_WAIT_MAX_MSEC 100
|
|
|
|
struct f_ospi {
|
|
void __iomem *base;
|
|
struct udevice *dev;
|
|
struct clk clk;
|
|
|
|
u32 mode;
|
|
u32 max_speed_hz;
|
|
u32 num_cs;
|
|
u32 chip_select;
|
|
};
|
|
|
|
static u32 f_ospi_get_dummy_cycle(const struct spi_mem_op *op)
|
|
{
|
|
return (op->dummy.nbytes * 8) / op->dummy.buswidth;
|
|
}
|
|
|
|
static void f_ospi_clear_irq(struct f_ospi *ospi)
|
|
{
|
|
writel(OSPI_IRQ_CS_DEASSERT | OSPI_IRQ_CS_TRANS_COMP,
|
|
ospi->base + OSPI_IRQ);
|
|
}
|
|
|
|
static void f_ospi_enable_irq_status(struct f_ospi *ospi, u32 irq_bits)
|
|
{
|
|
u32 val;
|
|
|
|
val = readl(ospi->base + OSPI_IRQ_STAT_EN);
|
|
val |= irq_bits;
|
|
writel(val, ospi->base + OSPI_IRQ_STAT_EN);
|
|
}
|
|
|
|
static void f_ospi_disable_irq_status(struct f_ospi *ospi, u32 irq_bits)
|
|
{
|
|
u32 val;
|
|
|
|
val = readl(ospi->base + OSPI_IRQ_STAT_EN);
|
|
val &= ~irq_bits;
|
|
writel(val, ospi->base + OSPI_IRQ_STAT_EN);
|
|
}
|
|
|
|
static void f_ospi_disable_irq_output(struct f_ospi *ospi, u32 irq_bits)
|
|
{
|
|
u32 val;
|
|
|
|
val = readl(ospi->base + OSPI_IRQ_SIG_EN);
|
|
val &= ~irq_bits;
|
|
writel(val, ospi->base + OSPI_IRQ_SIG_EN);
|
|
}
|
|
|
|
static int f_ospi_prepare_config(struct f_ospi *ospi)
|
|
{
|
|
u32 val, stat0, stat1;
|
|
|
|
/* G4: Disable internal clock */
|
|
val = readl(ospi->base + OSPI_CLK_CTL);
|
|
val &= ~(OSPI_CLK_CTL_BOOT_INT_CLK_EN | OSPI_CLK_CTL_INT_CLK_EN);
|
|
writel(val, ospi->base + OSPI_CLK_CTL);
|
|
|
|
/* G5: Wait for stop */
|
|
stat0 = OSPI_STAT_IS_AXI_WRITING | OSPI_STAT_IS_AXI_READING;
|
|
stat1 = OSPI_STAT_IS_SPI_IDLE | OSPI_STAT_IS_SPI_INT_CLK_STOP;
|
|
|
|
return readl_poll_timeout(ospi->base + OSPI_STAT,
|
|
val, (val & (stat0 | stat1)) == stat1,
|
|
OSPI_WAIT_MAX_MSEC);
|
|
}
|
|
|
|
static int f_ospi_unprepare_config(struct f_ospi *ospi)
|
|
{
|
|
u32 val;
|
|
|
|
/* G11: Enable internal clock */
|
|
val = readl(ospi->base + OSPI_CLK_CTL);
|
|
val |= OSPI_CLK_CTL_BOOT_INT_CLK_EN | OSPI_CLK_CTL_INT_CLK_EN;
|
|
writel(val, ospi->base + OSPI_CLK_CTL);
|
|
|
|
/* G12: Wait for clock to start */
|
|
return readl_poll_timeout(ospi->base + OSPI_STAT,
|
|
val, !(val & OSPI_STAT_IS_SPI_INT_CLK_STOP),
|
|
OSPI_WAIT_MAX_MSEC);
|
|
}
|
|
|
|
static void f_ospi_config_clk(struct f_ospi *ospi, u32 device_hz)
|
|
{
|
|
long rate_hz = clk_get_rate(&ospi->clk);
|
|
u32 div = DIV_ROUND_UP(rate_hz, device_hz);
|
|
u32 div_reg;
|
|
u32 val;
|
|
|
|
if (rate_hz < device_hz) {
|
|
dev_warn(ospi->dev, "Device frequency too large: %d\n",
|
|
device_hz);
|
|
div_reg = OSPI_CLK_CTL_DIV_1;
|
|
} else {
|
|
if (div == 1) {
|
|
div_reg = OSPI_CLK_CTL_DIV_1;
|
|
} else if (div == 2) {
|
|
div_reg = OSPI_CLK_CTL_DIV_2;
|
|
} else if (div <= 4) {
|
|
div_reg = OSPI_CLK_CTL_DIV_4;
|
|
} else if (div <= 8) {
|
|
div_reg = OSPI_CLK_CTL_DIV_8;
|
|
} else {
|
|
dev_warn(ospi->dev, "Device frequency too small: %d\n",
|
|
device_hz);
|
|
div_reg = OSPI_CLK_CTL_DIV_8;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* G7: Set clock mode
|
|
* clock phase is fixed at 180 degrees and configure edge direction
|
|
* instead.
|
|
*/
|
|
val = readl(ospi->base + OSPI_CLK_CTL);
|
|
|
|
val &= ~(OSPI_CLK_CTL_PHA | OSPI_CLK_CTL_DIV);
|
|
val |= FIELD_PREP(OSPI_CLK_CTL_PHA, OSPI_CLK_CTL_PHA_180)
|
|
| FIELD_PREP(OSPI_CLK_CTL_DIV, div_reg);
|
|
|
|
writel(val, ospi->base + OSPI_CLK_CTL);
|
|
}
|
|
|
|
static void f_ospi_config_dll(struct f_ospi *ospi)
|
|
{
|
|
/* G8: Configure DLL, nothing */
|
|
}
|
|
|
|
static u8 f_ospi_get_mode(struct f_ospi *ospi, int width, int data_size)
|
|
{
|
|
u8 mode = OSPI_PROT_MODE_SINGLE;
|
|
|
|
switch (width) {
|
|
case 1:
|
|
mode = OSPI_PROT_MODE_SINGLE;
|
|
break;
|
|
case 2:
|
|
mode = OSPI_PROT_MODE_DUAL;
|
|
break;
|
|
case 4:
|
|
mode = OSPI_PROT_MODE_QUAD;
|
|
break;
|
|
case 8:
|
|
mode = OSPI_PROT_MODE_OCTAL;
|
|
break;
|
|
default:
|
|
if (data_size)
|
|
dev_err(ospi->dev, "Invalid buswidth: %d\n", width);
|
|
break;
|
|
}
|
|
|
|
return mode;
|
|
}
|
|
|
|
static void f_ospi_config_indir_protocol(struct f_ospi *ospi,
|
|
const struct spi_mem_op *op)
|
|
{
|
|
u8 mode;
|
|
u32 prot = 0, val;
|
|
int unit;
|
|
|
|
/* Set one chip select */
|
|
writel(BIT(ospi->chip_select), ospi->base + OSPI_SSEL);
|
|
|
|
mode = f_ospi_get_mode(ospi, op->cmd.buswidth, 1);
|
|
prot |= FIELD_PREP(OSPI_PROT_MODE_CODE_MASK, mode);
|
|
|
|
mode = f_ospi_get_mode(ospi, op->addr.buswidth, op->addr.nbytes);
|
|
prot |= FIELD_PREP(OSPI_PROT_MODE_ADDR_MASK, mode);
|
|
|
|
mode = f_ospi_get_mode(ospi, op->data.buswidth, op->data.nbytes);
|
|
prot |= FIELD_PREP(OSPI_PROT_MODE_DATA_MASK, mode);
|
|
|
|
prot |= FIELD_PREP(OSPI_PROT_DATA_RATE_DATA, OSPI_PROT_SDR);
|
|
prot |= FIELD_PREP(OSPI_PROT_DATA_RATE_ALT, OSPI_PROT_SDR);
|
|
prot |= FIELD_PREP(OSPI_PROT_DATA_RATE_ADDR, OSPI_PROT_SDR);
|
|
prot |= FIELD_PREP(OSPI_PROT_DATA_RATE_CODE, OSPI_PROT_SDR);
|
|
|
|
if (ospi->mode & SPI_LSB_FIRST)
|
|
prot |= OSPI_PROT_BIT_POS_DATA | OSPI_PROT_BIT_POS_ALT
|
|
| OSPI_PROT_BIT_POS_ADDR | OSPI_PROT_BIT_POS_CODE;
|
|
|
|
if (ospi->mode & SPI_CPHA)
|
|
prot |= OSPI_PROT_SAMP_EDGE;
|
|
|
|
/* Examine nbytes % 4 */
|
|
switch (op->data.nbytes & 0x3) {
|
|
case 0:
|
|
unit = OSPI_PROT_DATA_UNIT_4B;
|
|
val = 0;
|
|
break;
|
|
case 2:
|
|
unit = OSPI_PROT_DATA_UNIT_2B;
|
|
val = OSPI_DAT_SIZE_EN | (op->data.nbytes - 1);
|
|
break;
|
|
default:
|
|
unit = OSPI_PROT_DATA_UNIT_1B;
|
|
val = OSPI_DAT_SIZE_EN | (op->data.nbytes - 1);
|
|
break;
|
|
}
|
|
prot |= FIELD_PREP(OSPI_PROT_DATA_UNIT_MASK, unit);
|
|
|
|
switch (op->data.dir) {
|
|
case SPI_MEM_DATA_IN:
|
|
prot |= OSPI_PROT_DATA_EN;
|
|
break;
|
|
|
|
case SPI_MEM_DATA_OUT:
|
|
prot |= OSPI_PROT_TRANS_DIR_WRITE | OSPI_PROT_DATA_EN;
|
|
break;
|
|
|
|
case SPI_MEM_NO_DATA:
|
|
prot |= OSPI_PROT_TRANS_DIR_WRITE;
|
|
break;
|
|
|
|
default:
|
|
dev_warn(ospi->dev, "Unsupported direction");
|
|
break;
|
|
}
|
|
|
|
prot |= FIELD_PREP(OSPI_PROT_ADDR_SIZE_MASK, op->addr.nbytes);
|
|
prot |= FIELD_PREP(OSPI_PROT_CODE_SIZE_MASK, 1); /* 1byte */
|
|
|
|
writel(prot, ospi->base + OSPI_PROT_CTL_INDIR);
|
|
writel(val, ospi->base + OSPI_DAT_SIZE_INDIR);
|
|
}
|
|
|
|
static int f_ospi_indir_prepare_op(struct f_ospi *ospi,
|
|
const struct spi_mem_op *op)
|
|
{
|
|
u32 irq_stat_en;
|
|
int ret;
|
|
|
|
ret = f_ospi_prepare_config(ospi);
|
|
if (ret)
|
|
return ret;
|
|
|
|
f_ospi_config_clk(ospi, ospi->max_speed_hz);
|
|
|
|
f_ospi_config_indir_protocol(ospi, op);
|
|
|
|
writel(f_ospi_get_dummy_cycle(op), ospi->base + OSPI_DMY_INDIR);
|
|
writel(op->addr.val, ospi->base + OSPI_ADDR);
|
|
writel(op->cmd.opcode, ospi->base + OSPI_CMD_IDX_INDIR);
|
|
|
|
f_ospi_clear_irq(ospi);
|
|
|
|
switch (op->data.dir) {
|
|
case SPI_MEM_DATA_IN:
|
|
irq_stat_en = OSPI_IRQ_READ_BUF_READY | OSPI_IRQ_CS_TRANS_COMP;
|
|
break;
|
|
|
|
case SPI_MEM_DATA_OUT:
|
|
irq_stat_en = OSPI_IRQ_WRITE_BUF_READY | OSPI_IRQ_CS_TRANS_COMP;
|
|
break;
|
|
|
|
case SPI_MEM_NO_DATA:
|
|
irq_stat_en = OSPI_IRQ_CS_TRANS_COMP;
|
|
break;
|
|
|
|
default:
|
|
dev_warn(ospi->dev, "Unsupported direction");
|
|
irq_stat_en = 0;
|
|
}
|
|
|
|
f_ospi_disable_irq_status(ospi, ~irq_stat_en);
|
|
f_ospi_enable_irq_status(ospi, irq_stat_en);
|
|
|
|
return f_ospi_unprepare_config(ospi);
|
|
}
|
|
|
|
static void f_ospi_indir_start_xfer(struct f_ospi *ospi)
|
|
{
|
|
/* Write only 1, auto cleared */
|
|
writel(OSPI_TRANS_CTL_START_REQ, ospi->base + OSPI_TRANS_CTL);
|
|
}
|
|
|
|
static void f_ospi_indir_stop_xfer(struct f_ospi *ospi)
|
|
{
|
|
/* Write only 1, auto cleared */
|
|
writel(OSPI_TRANS_CTL_STOP_REQ, ospi->base + OSPI_TRANS_CTL);
|
|
}
|
|
|
|
static int f_ospi_indir_wait_xfer_complete(struct f_ospi *ospi)
|
|
{
|
|
u32 val;
|
|
|
|
return readl_poll_timeout(ospi->base + OSPI_IRQ, val,
|
|
val & OSPI_IRQ_CS_TRANS_COMP,
|
|
OSPI_WAIT_MAX_MSEC);
|
|
}
|
|
|
|
static int f_ospi_indir_read(struct f_ospi *ospi,
|
|
const struct spi_mem_op *op)
|
|
{
|
|
u8 *buf = op->data.buf.in;
|
|
u32 val;
|
|
int i, ret;
|
|
|
|
/* E1-2: Prepare transfer operation */
|
|
ret = f_ospi_indir_prepare_op(ospi, op);
|
|
if (ret)
|
|
goto out;
|
|
|
|
f_ospi_indir_start_xfer(ospi);
|
|
|
|
/* E3-4: Wait for ready and read data */
|
|
for (i = 0; i < op->data.nbytes; i++) {
|
|
ret = readl_poll_timeout(ospi->base + OSPI_IRQ, val,
|
|
val & OSPI_IRQ_READ_BUF_READY,
|
|
OSPI_WAIT_MAX_MSEC);
|
|
if (ret)
|
|
goto out;
|
|
|
|
buf[i] = readl(ospi->base + OSPI_DAT) & 0xFF;
|
|
}
|
|
|
|
/* E5-6: Stop transfer if data size is nothing */
|
|
if (!(readl(ospi->base + OSPI_DAT_SIZE_INDIR) & OSPI_DAT_SIZE_EN))
|
|
f_ospi_indir_stop_xfer(ospi);
|
|
|
|
/* E7-8: Wait for completion and clear */
|
|
ret = f_ospi_indir_wait_xfer_complete(ospi);
|
|
if (ret)
|
|
goto out;
|
|
|
|
writel(OSPI_IRQ_CS_TRANS_COMP, ospi->base + OSPI_IRQ);
|
|
|
|
/* E9: Do nothing if data size is valid */
|
|
if (readl(ospi->base + OSPI_DAT_SIZE_INDIR) & OSPI_DAT_SIZE_EN)
|
|
goto out;
|
|
|
|
/* E10-11: Reset and check read fifo */
|
|
writel(OSPI_SWRST_INDIR_READ_FIFO, ospi->base + OSPI_SWRST);
|
|
|
|
ret = readl_poll_timeout(ospi->base + OSPI_SWRST, val,
|
|
!(val & OSPI_SWRST_INDIR_READ_FIFO),
|
|
OSPI_WAIT_MAX_MSEC);
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
static int f_ospi_indir_write(struct f_ospi *ospi,
|
|
const struct spi_mem_op *op)
|
|
{
|
|
u8 *buf = (u8 *)op->data.buf.out;
|
|
u32 val;
|
|
int i, ret;
|
|
|
|
/* F1-3: Prepare transfer operation */
|
|
ret = f_ospi_indir_prepare_op(ospi, op);
|
|
if (ret)
|
|
goto out;
|
|
|
|
f_ospi_indir_start_xfer(ospi);
|
|
|
|
if (!(readl(ospi->base + OSPI_PROT_CTL_INDIR) & OSPI_PROT_DATA_EN))
|
|
goto nodata;
|
|
|
|
/* F4-5: Wait for buffer ready and write data */
|
|
for (i = 0; i < op->data.nbytes; i++) {
|
|
ret = readl_poll_timeout(ospi->base + OSPI_IRQ, val,
|
|
val & OSPI_IRQ_WRITE_BUF_READY,
|
|
OSPI_WAIT_MAX_MSEC);
|
|
if (ret)
|
|
goto out;
|
|
|
|
writel(buf[i], ospi->base + OSPI_DAT);
|
|
}
|
|
|
|
/* F6-7: Stop transfer if data size is nothing */
|
|
if (!(readl(ospi->base + OSPI_DAT_SIZE_INDIR) & OSPI_DAT_SIZE_EN))
|
|
f_ospi_indir_stop_xfer(ospi);
|
|
|
|
nodata:
|
|
/* F8-9: Wait for completion and clear */
|
|
ret = f_ospi_indir_wait_xfer_complete(ospi);
|
|
if (ret)
|
|
goto out;
|
|
|
|
writel(OSPI_IRQ_CS_TRANS_COMP, ospi->base + OSPI_IRQ);
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
static int f_ospi_exec_op(struct spi_slave *slave, const struct spi_mem_op *op)
|
|
{
|
|
struct f_ospi *ospi = dev_get_priv(slave->dev->parent);
|
|
struct dm_spi_slave_plat *slave_plat;
|
|
int err = 0;
|
|
|
|
slave_plat = dev_get_parent_plat(slave->dev);
|
|
ospi->chip_select = slave_plat->cs;
|
|
|
|
switch (op->data.dir) {
|
|
case SPI_MEM_DATA_IN:
|
|
err = f_ospi_indir_read(ospi, op);
|
|
break;
|
|
|
|
case SPI_MEM_DATA_OUT:
|
|
fallthrough;
|
|
case SPI_MEM_NO_DATA:
|
|
err = f_ospi_indir_write(ospi, op);
|
|
break;
|
|
|
|
default:
|
|
dev_warn(ospi->dev, "Unsupported direction");
|
|
err = -EOPNOTSUPP;
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
static bool f_ospi_supports_op_width(const struct spi_mem_op *op)
|
|
{
|
|
u8 width_available[] = { 0, 1, 2, 4, 8 };
|
|
u8 width_op[] = { op->cmd.buswidth, op->addr.buswidth,
|
|
op->dummy.buswidth, op->data.buswidth };
|
|
bool is_match_found;
|
|
int i, j;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(width_op); i++) {
|
|
is_match_found = false;
|
|
|
|
for (j = 0; j < ARRAY_SIZE(width_available); j++) {
|
|
if (width_op[i] == width_available[j]) {
|
|
is_match_found = true;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (!is_match_found)
|
|
return false;
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
static bool f_ospi_supports_op(struct spi_slave *slave,
|
|
const struct spi_mem_op *op)
|
|
{
|
|
if (f_ospi_get_dummy_cycle(op) > OSPI_DUMMY_CYCLE_MAX)
|
|
return false;
|
|
|
|
if (op->addr.nbytes > 4)
|
|
return false;
|
|
|
|
if (!f_ospi_supports_op_width(op))
|
|
return false;
|
|
|
|
return spi_mem_default_supports_op(slave, op);
|
|
}
|
|
|
|
static int f_ospi_adjust_op_size(struct spi_slave *slave, struct spi_mem_op *op)
|
|
{
|
|
op->data.nbytes = min((int)op->data.nbytes, (int)(OSPI_DAT_SIZE_MAX));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct spi_controller_mem_ops f_ospi_mem_ops = {
|
|
.adjust_op_size = f_ospi_adjust_op_size,
|
|
.supports_op = f_ospi_supports_op,
|
|
.exec_op = f_ospi_exec_op,
|
|
};
|
|
|
|
static int f_ospi_set_speed(struct udevice *bus, u32 speed)
|
|
{
|
|
struct f_ospi *ospi = dev_get_priv(bus);
|
|
|
|
ospi->max_speed_hz = speed;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int f_ospi_set_mode(struct udevice *bus, u32 mode)
|
|
{
|
|
struct f_ospi *ospi = dev_get_priv(bus);
|
|
|
|
ospi->mode = mode;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int f_ospi_init(struct f_ospi *ospi)
|
|
{
|
|
int ret;
|
|
|
|
ret = f_ospi_prepare_config(ospi);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Disable boot signal */
|
|
writel(OSPI_ACC_MODE_BOOT_DISABLE, ospi->base + OSPI_ACC_MODE);
|
|
|
|
f_ospi_config_dll(ospi);
|
|
|
|
/* Disable IRQ */
|
|
f_ospi_clear_irq(ospi);
|
|
f_ospi_disable_irq_status(ospi, OSPI_IRQ_ALL);
|
|
f_ospi_disable_irq_output(ospi, OSPI_IRQ_ALL);
|
|
|
|
return f_ospi_unprepare_config(ospi);
|
|
}
|
|
|
|
static int f_ospi_of_to_plat(struct udevice *dev)
|
|
{
|
|
struct f_ospi *ospi = dev_get_priv(dev);
|
|
|
|
ospi->base = dev_read_addr_ptr(dev);
|
|
ospi->num_cs = dev_read_u32_default(dev, "num-cs", OSPI_NUM_CS);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int f_ospi_probe(struct udevice *dev)
|
|
{
|
|
struct f_ospi *ospi = dev_get_priv(dev);
|
|
int ret;
|
|
|
|
ospi->dev = dev;
|
|
|
|
ret = clk_get_by_index(dev, 0, &ospi->clk);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Failed to get clock\n");
|
|
goto err_put_ctlr;
|
|
}
|
|
|
|
ret = clk_enable(&ospi->clk);
|
|
if (ret) {
|
|
dev_err(dev, "Failed to enable the clock\n");
|
|
goto err_put_ctlr;
|
|
}
|
|
|
|
ret = f_ospi_init(ospi);
|
|
if (ret)
|
|
goto err_disable_clk;
|
|
|
|
return 0;
|
|
|
|
err_disable_clk:
|
|
clk_disable(&ospi->clk);
|
|
|
|
err_put_ctlr:
|
|
dev_err(dev, "Socionext F_OSPI probe failed\n");
|
|
return ret;
|
|
}
|
|
|
|
static int f_ospi_remove(struct udevice *dev)
|
|
{
|
|
struct f_ospi *ospi = dev_get_priv(dev);
|
|
|
|
clk_disable(&ospi->clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dm_spi_ops f_ospi_ops = {
|
|
.set_speed = f_ospi_set_speed,
|
|
.set_mode = f_ospi_set_mode,
|
|
.mem_ops = &f_ospi_mem_ops,
|
|
};
|
|
|
|
static const struct udevice_id f_ospi_dt_ids[] = {
|
|
{ .compatible = "socionext,f-ospi" },
|
|
{}
|
|
};
|
|
|
|
U_BOOT_DRIVER(f_ospi) = {
|
|
.name = "sn-f-ospi",
|
|
.id = UCLASS_SPI,
|
|
.of_match = f_ospi_dt_ids,
|
|
.of_to_plat = f_ospi_of_to_plat,
|
|
.ops = &f_ospi_ops,
|
|
.probe = f_ospi_probe,
|
|
.remove = f_ospi_remove,
|
|
.priv_auto = sizeof(struct f_ospi),
|
|
};
|