mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-18 18:59:44 +00:00
df9ebbe17e
Convert the CRS305-1G-4S board to CRS3xx-98DX3236 to enable easier implementation of new CRS3xx series boards, based on Marvell Prestera 98DX3236. Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr> Reviewed-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Jakov Petrina <jakov.petrina@sartura.hr> |
||
|---|---|---|
| .. | ||
| .gitignore | ||
| binary.0 | ||
| crs3xx-98dx3236.c | ||
| kwbimage.cfg.in | ||
| MAINTAINERS | ||
| Makefile | ||
| README | ||
MikroTik CRS3XX-98DX3236 ======================== CRS3XX-98DX3236 is a U-Boot port that supports a series of MikroTik switches based on the Marvell Prestera 98DX3236 switch with an integrated CPU. Common specifications: - Marvell Prestera 98DX3236 switch with an integrated ARMv7 CPU - 512 MB DDR3 RAM - UART @ 115200bps - 16 MB SPI flash (Winbond 25Q128JVSM) Currently supported hardware: - UART boot (using kwboot) and console - SPI boot, environment and load kernel Planned: - Gigabit Ethernet support (internal CPU <-> switch fabric connection) Getting binary.0 ================ binary.0 (DDR3 init phase) can be retrieved/extracted from the integrated bootloader on the SPI flash. Then binary.0 can be replaced with the extracted blob.