mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-03 01:50:25 +00:00
107c3391b9
This syncs drivers/ddr/marvell/a38x/ with the master branch of repository https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git up to the commit 7c351731d196 ("Merge pull request #29 from pali/sync-a38x-uboot"). This patch was created by following steps: 1. Replace all a38x files in U-Boot tree by files from upstream github Marvell mv-ddr-marvell repository. 2. Run following command to omit portions not relevant for a38x and ddr3: files=drivers/ddr/marvell/a38x/* sed 's/#if defined(CONFIG_ARMADA_38X) || defined(CONFIG_ARMADA_39X)/#ifdef TRUE/' -i $files unifdef -m -UMV_DDR -UMV_DDR_ATF -UCONFIG_DDR4 -UCONFIG_APN806 \ -UCONFIG_MC_STATIC -UCONFIG_MC_STATIC_PRINT -UCONFIG_PHY_STATIC \ -UCONFIG_PHY_STATIC_PRINT -UCONFIG_CUSTOMER_BOARD_SUPPORT \ -UCONFIG_A3700 -UA3900 -UA80X0 -UA70X0 -DTRUE $files 3. Manually omit SPDX-License-Identifier changes from this patch as upstream license in upstream github repository contains long license texts and U-Boot is using just SPDX-License-Identifier. After applying this patch, a38x ddr3 code in upstream Marvell github repository and in U-Boot would be fully identical. So in future applying above steps could be used to sync code again. The only change in this patch is removal of dead code and some fixes with include files. Signed-off-by: Pali Rohár <pali@kernel.org> Tested-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
243 lines
8.1 KiB
C
243 lines
8.1 KiB
C
/* SPDX-License-Identifier: GPL-2.0 */
|
|
/*
|
|
* Copyright (C) Marvell International Ltd. and its affiliates
|
|
*/
|
|
|
|
#ifndef _MV_DDR_PLAT_H
|
|
#define _MV_DDR_PLAT_H
|
|
|
|
#include <linux/delay.h>
|
|
|
|
#define MAX_DEVICE_NUM 1
|
|
#define MAX_INTERFACE_NUM 1
|
|
#define MAX_BUS_NUM 5
|
|
#define DDR_IF_CTRL_SUBPHYS_NUM 3
|
|
|
|
#define DFS_LOW_FREQ_VALUE 120
|
|
#define SDRAM_CS_SIZE 0xfffffff /* FIXME: implement a function for cs size for each platform */
|
|
|
|
#define INTER_REGS_BASE SOC_REGS_PHY_BASE
|
|
#define AP_INT_REG_START_ADDR 0xd0000000
|
|
#define AP_INT_REG_END_ADDR 0xd0100000
|
|
|
|
/* Controler bus divider 1 for 32 bit, 2 for 64 bit */
|
|
#define DDR_CONTROLLER_BUS_WIDTH_MULTIPLIER 1
|
|
|
|
/* Tune internal training params values */
|
|
#define TUNE_TRAINING_PARAMS_CK_DELAY 160
|
|
#define TUNE_TRAINING_PARAMS_PHYREG3VAL 0xA
|
|
#define TUNE_TRAINING_PARAMS_PRI_DATA 123
|
|
#define TUNE_TRAINING_PARAMS_NRI_DATA 123
|
|
#define TUNE_TRAINING_PARAMS_PRI_CTRL 74
|
|
#define TUNE_TRAINING_PARAMS_NRI_CTRL 74
|
|
#define TUNE_TRAINING_PARAMS_P_ODT_DATA 45
|
|
#define TUNE_TRAINING_PARAMS_N_ODT_DATA 45
|
|
#define TUNE_TRAINING_PARAMS_P_ODT_CTRL 45
|
|
#define TUNE_TRAINING_PARAMS_N_ODT_CTRL 45
|
|
#define TUNE_TRAINING_PARAMS_DIC 0x2
|
|
#define TUNE_TRAINING_PARAMS_ODT_CONFIG_2CS 0x120012
|
|
#define TUNE_TRAINING_PARAMS_ODT_CONFIG_1CS 0x10000
|
|
#define TUNE_TRAINING_PARAMS_RTT_NOM 0x44
|
|
|
|
#define TUNE_TRAINING_PARAMS_RTT_WR_1CS 0x0 /*off*/
|
|
#define TUNE_TRAINING_PARAMS_RTT_WR_2CS 0x0 /*off*/
|
|
|
|
#define MARVELL_BOARD MARVELL_BOARD_ID_BASE
|
|
|
|
|
|
#define REG_DEVICE_SAR1_ADDR 0xe4204
|
|
#define RST2_CPU_DDR_CLOCK_SELECT_IN_OFFSET 17
|
|
#define RST2_CPU_DDR_CLOCK_SELECT_IN_MASK 0x1f
|
|
#define DEVICE_SAMPLE_AT_RESET2_REG 0x18604
|
|
|
|
#define DEVICE_SAMPLE_AT_RESET2_REG_REFCLK_OFFSET 0
|
|
#define DEVICE_SAMPLE_AT_RESET2_REG_REFCLK_25MHZ 0
|
|
#define DEVICE_SAMPLE_AT_RESET2_REG_REFCLK_40MHZ 1
|
|
|
|
/* DRAM Windows */
|
|
#define REG_XBAR_WIN_5_CTRL_ADDR 0x20050
|
|
#define REG_XBAR_WIN_5_BASE_ADDR 0x20054
|
|
|
|
/* DRAM Windows */
|
|
#define REG_XBAR_WIN_4_CTRL_ADDR 0x20040
|
|
#define REG_XBAR_WIN_4_BASE_ADDR 0x20044
|
|
#define REG_XBAR_WIN_4_REMAP_ADDR 0x20048
|
|
#define REG_XBAR_WIN_7_REMAP_ADDR 0x20078
|
|
#define REG_XBAR_WIN_16_CTRL_ADDR 0x200d0
|
|
#define REG_XBAR_WIN_16_BASE_ADDR 0x200d4
|
|
#define REG_XBAR_WIN_16_REMAP_ADDR 0x200dc
|
|
#define REG_XBAR_WIN_19_CTRL_ADDR 0x200e8
|
|
|
|
#define REG_FASTPATH_WIN_BASE_ADDR(win) (0x20180 + (0x8 * win))
|
|
#define REG_FASTPATH_WIN_CTRL_ADDR(win) (0x20184 + (0x8 * win))
|
|
|
|
#define CPU_CONFIGURATION_REG(id) (0x21800 + (id * 0x100))
|
|
#define CPU_MRVL_ID_OFFSET 0x10
|
|
#define SAR1_CPU_CORE_MASK 0x00000018
|
|
#define SAR1_CPU_CORE_OFFSET 3
|
|
|
|
/* SatR defined too change topology busWidth and ECC configuration */
|
|
#define DDR_SATR_CONFIG_MASK_WIDTH 0x8
|
|
#define DDR_SATR_CONFIG_MASK_ECC 0x10
|
|
#define DDR_SATR_CONFIG_MASK_ECC_PUP 0x20
|
|
|
|
#define REG_SAMPLE_RESET_HIGH_ADDR 0x18600
|
|
|
|
#define MV_BOARD_REFCLK_25MHZ 25000000
|
|
#define MV_BOARD_REFCLK MV_BOARD_REFCLK_25MHZ
|
|
|
|
#define MAX_DQ_NUM 40
|
|
|
|
/* dram line buffer registers */
|
|
#define DLB_CTRL_REG 0x1700
|
|
#define DLB_EN_OFFS 0
|
|
#define DLB_EN_MASK 0x1
|
|
#define DLB_EN_ENA 1
|
|
#define DLB_EN_DIS 0
|
|
#define WR_COALESCE_EN_OFFS 2
|
|
#define WR_COALESCE_EN_MASK 0x1
|
|
#define WR_COALESCE_EN_ENA 1
|
|
#define WR_COALESCE_EN_DIS 0
|
|
#define AXI_PREFETCH_EN_OFFS 3
|
|
#define AXI_PREFETCH_EN_MASK 0x1
|
|
#define AXI_PREFETCH_EN_ENA 1
|
|
#define AXI_PREFETCH_EN_DIS 0
|
|
#define MBUS_PREFETCH_EN_OFFS 4
|
|
#define MBUS_PREFETCH_EN_MASK 0x1
|
|
#define MBUS_PREFETCH_EN_ENA 1
|
|
#define MBUS_PREFETCH_EN_DIS 0
|
|
#define PREFETCH_NXT_LN_SZ_TRIG_OFFS 6
|
|
#define PREFETCH_NXT_LN_SZ_TRIG_MASK 0x1
|
|
#define PREFETCH_NXT_LN_SZ_TRIG_ENA 1
|
|
#define PREFETCH_NXT_LN_SZ_TRIG_DIS 0
|
|
|
|
#define DLB_BUS_OPT_WT_REG 0x1704
|
|
#define DLB_AGING_REG 0x1708
|
|
#define DLB_EVICTION_CTRL_REG 0x170c
|
|
#define DLB_EVICTION_TIMERS_REG 0x1710
|
|
#define DLB_USER_CMD_REG 0x1714
|
|
#define DLB_WTS_DIFF_CS_REG 0x1770
|
|
#define DLB_WTS_DIFF_BG_REG 0x1774
|
|
#define DLB_WTS_SAME_BG_REG 0x1778
|
|
#define DLB_WTS_CMDS_REG 0x177c
|
|
#define DLB_WTS_ATTR_PRIO_REG 0x1780
|
|
#define DLB_QUEUE_MAP_REG 0x1784
|
|
#define DLB_SPLIT_REG 0x1788
|
|
|
|
/* ck swap control subphy number */
|
|
#define CK_SWAP_CTRL_PHY_NUM 2
|
|
|
|
/* Subphy result control per byte registers */
|
|
#define RESULT_CONTROL_BYTE_PUP_0_REG 0x1830
|
|
#define RESULT_CONTROL_BYTE_PUP_1_REG 0x1834
|
|
#define RESULT_CONTROL_BYTE_PUP_2_REG 0x1838
|
|
#define RESULT_CONTROL_BYTE_PUP_3_REG 0x183c
|
|
#define RESULT_CONTROL_BYTE_PUP_4_REG 0x18b0
|
|
|
|
/* Subphy result control per bit registers */
|
|
#define RESULT_CONTROL_PUP_0_BIT_0_REG 0x18b4
|
|
#define RESULT_CONTROL_PUP_0_BIT_1_REG 0x18b8
|
|
#define RESULT_CONTROL_PUP_0_BIT_2_REG 0x18bc
|
|
#define RESULT_CONTROL_PUP_0_BIT_3_REG 0x18c0
|
|
#define RESULT_CONTROL_PUP_0_BIT_4_REG 0x18c4
|
|
#define RESULT_CONTROL_PUP_0_BIT_5_REG 0x18c8
|
|
#define RESULT_CONTROL_PUP_0_BIT_6_REG 0x18cc
|
|
#define RESULT_CONTROL_PUP_0_BIT_7_REG 0x18f0
|
|
|
|
#define RESULT_CONTROL_PUP_1_BIT_0_REG 0x18f4
|
|
#define RESULT_CONTROL_PUP_1_BIT_1_REG 0x18f8
|
|
#define RESULT_CONTROL_PUP_1_BIT_2_REG 0x18fc
|
|
#define RESULT_CONTROL_PUP_1_BIT_3_REG 0x1930
|
|
#define RESULT_CONTROL_PUP_1_BIT_4_REG 0x1934
|
|
#define RESULT_CONTROL_PUP_1_BIT_5_REG 0x1938
|
|
#define RESULT_CONTROL_PUP_1_BIT_6_REG 0x193c
|
|
#define RESULT_CONTROL_PUP_1_BIT_7_REG 0x19b0
|
|
|
|
#define RESULT_CONTROL_PUP_2_BIT_0_REG 0x19b4
|
|
#define RESULT_CONTROL_PUP_2_BIT_1_REG 0x19b8
|
|
#define RESULT_CONTROL_PUP_2_BIT_2_REG 0x19bc
|
|
#define RESULT_CONTROL_PUP_2_BIT_3_REG 0x19c0
|
|
#define RESULT_CONTROL_PUP_2_BIT_4_REG 0x19c4
|
|
#define RESULT_CONTROL_PUP_2_BIT_5_REG 0x19c8
|
|
#define RESULT_CONTROL_PUP_2_BIT_6_REG 0x19cc
|
|
#define RESULT_CONTROL_PUP_2_BIT_7_REG 0x19f0
|
|
|
|
#define RESULT_CONTROL_PUP_3_BIT_0_REG 0x19f4
|
|
#define RESULT_CONTROL_PUP_3_BIT_1_REG 0x19f8
|
|
#define RESULT_CONTROL_PUP_3_BIT_2_REG 0x19fc
|
|
#define RESULT_CONTROL_PUP_3_BIT_3_REG 0x1a30
|
|
#define RESULT_CONTROL_PUP_3_BIT_4_REG 0x1a34
|
|
#define RESULT_CONTROL_PUP_3_BIT_5_REG 0x1a38
|
|
#define RESULT_CONTROL_PUP_3_BIT_6_REG 0x1a3c
|
|
#define RESULT_CONTROL_PUP_3_BIT_7_REG 0x1ab0
|
|
|
|
#define RESULT_CONTROL_PUP_4_BIT_0_REG 0x1ab4
|
|
#define RESULT_CONTROL_PUP_4_BIT_1_REG 0x1ab8
|
|
#define RESULT_CONTROL_PUP_4_BIT_2_REG 0x1abc
|
|
#define RESULT_CONTROL_PUP_4_BIT_3_REG 0x1ac0
|
|
#define RESULT_CONTROL_PUP_4_BIT_4_REG 0x1ac4
|
|
#define RESULT_CONTROL_PUP_4_BIT_5_REG 0x1ac8
|
|
#define RESULT_CONTROL_PUP_4_BIT_6_REG 0x1acc
|
|
#define RESULT_CONTROL_PUP_4_BIT_7_REG 0x1af0
|
|
|
|
/* CPU */
|
|
#define REG_BOOTROM_ROUTINE_ADDR 0x182d0
|
|
#define REG_BOOTROM_ROUTINE_DRAM_INIT_OFFS 12
|
|
|
|
/* Matrix enables DRAM modes (bus width/ECC) per boardId */
|
|
#define TOPOLOGY_UPDATE_32BIT 0
|
|
#define TOPOLOGY_UPDATE_32BIT_ECC 1
|
|
#define TOPOLOGY_UPDATE_16BIT 2
|
|
#define TOPOLOGY_UPDATE_16BIT_ECC 3
|
|
#define TOPOLOGY_UPDATE_16BIT_ECC_PUP3 4
|
|
#define TOPOLOGY_UPDATE { \
|
|
/* 32Bit, 32bit ECC, 16bit, 16bit ECC PUP4, 16bit ECC PUP3 */ \
|
|
{1, 1, 1, 1, 1}, /* RD_NAS_68XX_ID */ \
|
|
{1, 1, 1, 1, 1}, /* DB_68XX_ID */ \
|
|
{1, 0, 1, 0, 1}, /* RD_AP_68XX_ID */ \
|
|
{1, 0, 1, 0, 1}, /* DB_AP_68XX_ID */ \
|
|
{1, 0, 1, 0, 1}, /* DB_GP_68XX_ID */ \
|
|
{0, 0, 1, 1, 0}, /* DB_BP_6821_ID */ \
|
|
{1, 1, 1, 1, 1} /* DB_AMC_6820_ID */ \
|
|
};
|
|
|
|
enum {
|
|
CPU_1066MHZ_DDR_400MHZ,
|
|
CPU_RESERVED_DDR_RESERVED0,
|
|
CPU_667MHZ_DDR_667MHZ,
|
|
CPU_800MHZ_DDR_800MHZ,
|
|
CPU_RESERVED_DDR_RESERVED1,
|
|
CPU_RESERVED_DDR_RESERVED2,
|
|
CPU_RESERVED_DDR_RESERVED3,
|
|
LAST_FREQ
|
|
};
|
|
|
|
/* struct used for DLB configuration array */
|
|
struct dlb_config {
|
|
u32 reg_addr;
|
|
u32 reg_data;
|
|
};
|
|
|
|
#define ACTIVE_INTERFACE_MASK 0x1
|
|
|
|
extern u32 dmin_phy_reg_table[][2];
|
|
extern u16 odt_slope[];
|
|
extern u16 odt_intercept[];
|
|
|
|
int mv_ddr_pre_training_soc_config(const char *ddr_type);
|
|
int mv_ddr_post_training_soc_config(const char *ddr_type);
|
|
void mv_ddr_mem_scrubbing(void);
|
|
u32 mv_ddr_init_freq_get(void);
|
|
void mv_ddr_odpg_enable(void);
|
|
void mv_ddr_odpg_disable(void);
|
|
void mv_ddr_odpg_done_clr(void);
|
|
int mv_ddr_is_odpg_done(u32 count);
|
|
void mv_ddr_training_enable(void);
|
|
int mv_ddr_is_training_done(u32 count, u32 *result);
|
|
u32 mv_ddr_dm_pad_get(void);
|
|
int mv_ddr_pre_training_fixup(void);
|
|
int mv_ddr_post_training_fixup(void);
|
|
int mv_ddr_manual_cal_do(void);
|
|
int ddr3_calc_mem_cs_size(u32 cs, uint64_t *cs_size);
|
|
|
|
#endif /* _MV_DDR_PLAT_H */
|