u-boot/board/samsung/smdk5250/smdk5250.c
Piotr Wilczek d31b388859 board:samsung:common: move max77686 init function
This patch moves board specific max77686 init function from
common board to smdk5250 board file.

Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Rajeshwari S Shinde <rajeshwari.s@samsung.com>
Cc: Rajeshwari Birje <rajeshwari.birje@gmail.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-03-12 19:55:00 +09:00

368 lines
8 KiB
C

/*
* Copyright (C) 2012 Samsung Electronics
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <cros_ec.h>
#include <fdtdec.h>
#include <asm/io.h>
#include <errno.h>
#include <i2c.h>
#include <lcd.h>
#include <netdev.h>
#include <spi.h>
#include <asm/arch/cpu.h>
#include <asm/arch/dwmmc.h>
#include <asm/arch/gpio.h>
#include <asm/arch/mmc.h>
#include <asm/arch/pinmux.h>
#include <asm/arch/power.h>
#include <asm/arch/sromc.h>
#include <asm/arch/dp_info.h>
#include <power/pmic.h>
#include <power/max77686_pmic.h>
DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_SOUND_MAX98095
static void board_enable_audio_codec(void)
{
struct exynos5_gpio_part1 *gpio1 = (struct exynos5_gpio_part1 *)
samsung_get_base_gpio_part1();
/* Enable MAX98095 Codec */
s5p_gpio_direction_output(&gpio1->x1, 7, 1);
s5p_gpio_set_pull(&gpio1->x1, 7, GPIO_PULL_NONE);
}
#endif
int exynos_init(void)
{
#ifdef CONFIG_SOUND_MAX98095
board_enable_audio_codec();
#endif
return 0;
}
int board_eth_init(bd_t *bis)
{
#ifdef CONFIG_SMC911X
u32 smc_bw_conf, smc_bc_conf;
struct fdt_sromc config;
fdt_addr_t base_addr;
/* Non-FDT configuration - bank number and timing parameters*/
config.bank = CONFIG_ENV_SROM_BANK;
config.width = 2;
config.timing[FDT_SROM_TACS] = 0x01;
config.timing[FDT_SROM_TCOS] = 0x01;
config.timing[FDT_SROM_TACC] = 0x06;
config.timing[FDT_SROM_TCOH] = 0x01;
config.timing[FDT_SROM_TAH] = 0x0C;
config.timing[FDT_SROM_TACP] = 0x09;
config.timing[FDT_SROM_PMC] = 0x01;
base_addr = CONFIG_SMC911X_BASE;
/* Ethernet needs data bus width of 16 bits */
if (config.width != 2) {
debug("%s: Unsupported bus width %d\n", __func__,
config.width);
return -1;
}
smc_bw_conf = SROMC_DATA16_WIDTH(config.bank)
| SROMC_BYTE_ENABLE(config.bank);
smc_bc_conf = SROMC_BC_TACS(config.timing[FDT_SROM_TACS]) |\
SROMC_BC_TCOS(config.timing[FDT_SROM_TCOS]) |\
SROMC_BC_TACC(config.timing[FDT_SROM_TACC]) |\
SROMC_BC_TCOH(config.timing[FDT_SROM_TCOH]) |\
SROMC_BC_TAH(config.timing[FDT_SROM_TAH]) |\
SROMC_BC_TACP(config.timing[FDT_SROM_TACP]) |\
SROMC_BC_PMC(config.timing[FDT_SROM_PMC]);
/* Select and configure the SROMC bank */
exynos_pinmux_config(PERIPH_ID_SROMC, config.bank);
s5p_config_sromc(config.bank, smc_bw_conf, smc_bc_conf);
return smc911x_initialize(0, base_addr);
#endif
return 0;
}
#ifdef CONFIG_DISPLAY_BOARDINFO
int checkboard(void)
{
printf("\nBoard: SMDK5250\n");
return 0;
}
#endif
#ifdef CONFIG_GENERIC_MMC
int board_mmc_init(bd_t *bis)
{
int err, ret = 0, index, bus_width;
u32 base;
err = exynos_pinmux_config(PERIPH_ID_SDMMC0, PINMUX_FLAG_8BIT_MODE);
if (err)
debug("SDMMC0 not configured\n");
ret |= err;
/*EMMC: dwmmc Channel-0 with 8 bit bus width */
index = 0;
base = samsung_get_base_mmc() + (0x10000 * index);
bus_width = 8;
err = exynos_dwmci_add_port(index, base, bus_width, (u32)NULL);
if (err)
debug("dwmmc Channel-0 init failed\n");
ret |= err;
err = exynos_pinmux_config(PERIPH_ID_SDMMC2, PINMUX_FLAG_NONE);
if (err)
debug("SDMMC2 not configured\n");
ret |= err;
/*SD: dwmmc Channel-2 with 4 bit bus width */
index = 2;
base = samsung_get_base_mmc() + (0x10000 * index);
bus_width = 4;
err = exynos_dwmci_add_port(index, base, bus_width, (u32)NULL);
if (err)
debug("dwmmc Channel-2 init failed\n");
ret |= err;
return ret;
}
#endif
void board_i2c_init(const void *blob)
{
int i;
for (i = 0; i < CONFIG_MAX_I2C_NUM; i++) {
exynos_pinmux_config((PERIPH_ID_I2C0 + i),
PINMUX_FLAG_NONE);
}
}
#if defined(CONFIG_POWER)
#ifdef CONFIG_POWER_MAX77686
static int pmic_reg_update(struct pmic *p, int reg, uint regval)
{
u32 val;
int ret = 0;
ret = pmic_reg_read(p, reg, &val);
if (ret) {
debug("%s: PMIC %d register read failed\n", __func__, reg);
return -1;
}
val |= regval;
ret = pmic_reg_write(p, reg, val);
if (ret) {
debug("%s: PMIC %d register write failed\n", __func__, reg);
return -1;
}
return 0;
}
static int max77686_init(void)
{
struct pmic *p;
if (pmic_init(I2C_PMIC))
return -1;
p = pmic_get("MAX77686_PMIC");
if (!p)
return -ENODEV;
if (pmic_probe(p))
return -1;
if (pmic_reg_update(p, MAX77686_REG_PMIC_32KHZ, MAX77686_32KHCP_EN))
return -1;
if (pmic_reg_update(p, MAX77686_REG_PMIC_BBAT,
MAX77686_BBCHOSTEN | MAX77686_BBCVS_3_5V))
return -1;
/* VDD_MIF */
if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK1OUT,
MAX77686_BUCK1OUT_1V)) {
debug("%s: PMIC %d register write failed\n", __func__,
MAX77686_REG_PMIC_BUCK1OUT);
return -1;
}
if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK1CRTL,
MAX77686_BUCK1CTRL_EN))
return -1;
/* VDD_ARM */
if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK2DVS1,
MAX77686_BUCK2DVS1_1_3V)) {
debug("%s: PMIC %d register write failed\n", __func__,
MAX77686_REG_PMIC_BUCK2DVS1);
return -1;
}
if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK2CTRL1,
MAX77686_BUCK2CTRL_ON))
return -1;
/* VDD_INT */
if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK3DVS1,
MAX77686_BUCK3DVS1_1_0125V)) {
debug("%s: PMIC %d register write failed\n", __func__,
MAX77686_REG_PMIC_BUCK3DVS1);
return -1;
}
if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK3CTRL,
MAX77686_BUCK3CTRL_ON))
return -1;
/* VDD_G3D */
if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK4DVS1,
MAX77686_BUCK4DVS1_1_2V)) {
debug("%s: PMIC %d register write failed\n", __func__,
MAX77686_REG_PMIC_BUCK4DVS1);
return -1;
}
if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK4CTRL1,
MAX77686_BUCK3CTRL_ON))
return -1;
/* VDD_LDO2 */
if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO2CTRL1,
MAX77686_LD02CTRL1_1_5V | EN_LDO))
return -1;
/* VDD_LDO3 */
if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO3CTRL1,
MAX77686_LD03CTRL1_1_8V | EN_LDO))
return -1;
/* VDD_LDO5 */
if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO5CTRL1,
MAX77686_LD05CTRL1_1_8V | EN_LDO))
return -1;
/* VDD_LDO10 */
if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO10CTRL1,
MAX77686_LD10CTRL1_1_8V | EN_LDO))
return -1;
return 0;
}
#endif /* CONFIG_POWER_MAX77686 */
int exynos_power_init(void)
{
int ret = 0;
#ifdef CONFIG_POWER_MAX77686
ret = max77686_init();
#endif
return ret;
}
#endif /* CONFIG_POWER */
#ifdef CONFIG_LCD
void exynos_cfg_lcd_gpio(void)
{
struct exynos5_gpio_part1 *gpio1 =
(struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1();
/* For Backlight */
s5p_gpio_cfg_pin(&gpio1->b2, 0, GPIO_OUTPUT);
s5p_gpio_set_value(&gpio1->b2, 0, 1);
/* LCD power on */
s5p_gpio_cfg_pin(&gpio1->x1, 5, GPIO_OUTPUT);
s5p_gpio_set_value(&gpio1->x1, 5, 1);
/* Set Hotplug detect for DP */
s5p_gpio_cfg_pin(&gpio1->x0, 7, GPIO_FUNC(0x3));
}
void exynos_set_dp_phy(unsigned int onoff)
{
set_dp_phy_ctrl(onoff);
}
vidinfo_t panel_info = {
.vl_freq = 60,
.vl_col = 2560,
.vl_row = 1600,
.vl_width = 2560,
.vl_height = 1600,
.vl_clkp = CONFIG_SYS_LOW,
.vl_hsp = CONFIG_SYS_LOW,
.vl_vsp = CONFIG_SYS_LOW,
.vl_dp = CONFIG_SYS_LOW,
.vl_bpix = 4, /* LCD_BPP = 2^4, for output conosle on LCD */
/* wDP panel timing infomation */
.vl_hspw = 32,
.vl_hbpd = 80,
.vl_hfpd = 48,
.vl_vspw = 6,
.vl_vbpd = 37,
.vl_vfpd = 3,
.vl_cmd_allow_len = 0xf,
.win_id = 3,
.dual_lcd_enabled = 0,
.init_delay = 0,
.power_on_delay = 0,
.reset_delay = 0,
.interface_mode = FIMD_RGB_INTERFACE,
.dp_enabled = 1,
};
static struct edp_device_info edp_info = {
.disp_info = {
.h_res = 2560,
.h_sync_width = 32,
.h_back_porch = 80,
.h_front_porch = 48,
.v_res = 1600,
.v_sync_width = 6,
.v_back_porch = 37,
.v_front_porch = 3,
.v_sync_rate = 60,
},
.lt_info = {
.lt_status = DP_LT_NONE,
},
.video_info = {
.master_mode = 0,
.bist_mode = DP_DISABLE,
.bist_pattern = NO_PATTERN,
.h_sync_polarity = 0,
.v_sync_polarity = 0,
.interlaced = 0,
.color_space = COLOR_RGB,
.dynamic_range = VESA,
.ycbcr_coeff = COLOR_YCBCR601,
.color_depth = COLOR_8,
},
};
static struct exynos_dp_platform_data dp_platform_data = {
.edp_dev_info = &edp_info,
};
void init_panel_info(vidinfo_t *vid)
{
vid->rgb_mode = MODE_RGB_P;
exynos_set_dp_platform_data(&dp_platform_data);
}
#endif