u-boot/drivers/power/regulator/tps65090_regulator.c
Simon Glass caa4daa2ae dm: treewide: Rename 'platdata' variables to just 'plat'
We use 'priv' for private data but often use 'platdata' for platform data.
We can't really use 'pdata' since that is ambiguous (it could mean private
or platform data).

Rename some of the latter variables to end with 'plat' for consistency.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13 16:51:08 -07:00

139 lines
3.2 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (c) 2015 Google, Inc
*/
#include <common.h>
#include <dm.h>
#include <errno.h>
#include <log.h>
#include <linux/delay.h>
#include <power/pmic.h>
#include <power/regulator.h>
#include <power/tps65090.h>
static int tps65090_fet_probe(struct udevice *dev)
{
struct dm_regulator_uclass_plat *uc_pdata;
uc_pdata = dev_get_uclass_plat(dev);
uc_pdata->type = REGULATOR_TYPE_OTHER;
uc_pdata->mode_count = 0;
return 0;
}
static int tps65090_fet_get_enable(struct udevice *dev)
{
struct udevice *pmic = dev_get_parent(dev);
int ret, fet_id;
fet_id = dev->driver_data;
debug("%s: fet_id=%d\n", __func__, fet_id);
ret = pmic_reg_read(pmic, REG_FET_BASE + fet_id);
if (ret < 0)
return ret;
return ret & FET_CTRL_ENFET;
}
/**
* Set the power state for a FET
*
* @param pmic pmic structure for the tps65090
* @param fet_id FET number to set (1..MAX_FET_NUM)
* @param set 1 to power on FET, 0 to power off
* @return -EIO if we got a comms error, -EAGAIN if the FET failed to
* change state. If all is ok, returns 0.
*/
static int tps65090_fet_set(struct udevice *pmic, int fet_id, bool set)
{
int retry;
u32 value;
int ret;
value = FET_CTRL_ADENFET | FET_CTRL_WAIT;
if (set)
value |= FET_CTRL_ENFET;
if (pmic_reg_write(pmic, REG_FET_BASE + fet_id, value))
return -EIO;
/* Try reading until we get a result */
for (retry = 0; retry < MAX_CTRL_READ_TRIES; retry++) {
ret = pmic_reg_read(pmic, REG_FET_BASE + fet_id);
if (ret < 0)
return ret;
/* Check that the FET went into the expected state */
debug("%s: flags=%x\n", __func__, ret);
if (!!(ret & FET_CTRL_PGFET) == set)
return 0;
/* If we got a timeout, there is no point in waiting longer */
if (ret & FET_CTRL_TOFET)
break;
mdelay(1);
}
debug("FET %d: Power good should have set to %d but reg=%#02x\n",
fet_id, set, ret);
return -EAGAIN;
}
static int tps65090_fet_set_enable(struct udevice *dev, bool enable)
{
struct udevice *pmic = dev_get_parent(dev);
int ret, fet_id;
ulong start;
int loops;
fet_id = dev->driver_data;
debug("%s: fet_id=%d, enable=%d\n", __func__, fet_id, enable);
start = get_timer(0);
for (loops = 0;; loops++) {
ret = tps65090_fet_set(pmic, fet_id, enable);
if (!ret)
break;
if (get_timer(start) > 100)
break;
/* Turn it off and try again until we time out */
tps65090_fet_set(pmic, fet_id, false);
}
if (ret)
debug("%s: FET%d failed to power on: time=%lums, loops=%d\n",
__func__, fet_id, get_timer(start), loops);
else if (loops)
debug("%s: FET%d powered on after %lums, loops=%d\n",
__func__, fet_id, get_timer(start), loops);
/*
* Unfortunately there are some conditions where the power-good bit
* will be 0, but the FET still comes up. One such case occurs with
* the LCD backlight on snow. We'll just return 0 here and assume
* that the FET will eventually come up.
*/
if (ret == -EAGAIN)
ret = 0;
return ret;
}
static const struct dm_regulator_ops tps65090_fet_ops = {
.get_enable = tps65090_fet_get_enable,
.set_enable = tps65090_fet_set_enable,
};
U_BOOT_DRIVER(tps65090_fet) = {
.name = TPS65090_FET_DRIVER,
.id = UCLASS_REGULATOR,
.ops = &tps65090_fet_ops,
.probe = tps65090_fet_probe,
};