u-boot/board/highbank/highbank.c
Ilias Apalodimas e7fb789612 sandbox: Remove OF_HOSTFILE
OF_HOSTFILE is used on sandbox configs only.  Although it's pretty
unique and not causing any confusions,  we are better of having simpler
config options for the DTB.

So let's replace that with the existing OF_BOARD.  U-Boot would then
have only three config options for the DTB origin.
- OF_SEPARATE, build separately from U-Boot
- OF_BOARD, board specific way of providing the DTB
- OF_EMBED embedded in the u-boot binary(should not be used in production

Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-27 16:38:26 -04:00

152 lines
2.9 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2010-2011 Calxeda, Inc.
*/
#include <common.h>
#include <ahci.h>
#include <cpu_func.h>
#include <env.h>
#include <fdt_support.h>
#include <fdtdec.h>
#include <init.h>
#include <net.h>
#include <scsi.h>
#include <asm/global_data.h>
#include <linux/sizes.h>
#include <asm/io.h>
#define HB_AHCI_BASE 0xffe08000
#define HB_SCU_A9_PWR_STATUS 0xfff10008
#define HB_SREG_A9_PWR_REQ 0xfff3cf00
#define HB_SREG_A9_BOOT_SRC_STAT 0xfff3cf04
#define HB_SREG_A9_PWRDOM_STAT 0xfff3cf20
#define HB_SREG_A15_PWR_CTRL 0xfff3c200
#define HB_PWR_SUSPEND 0
#define HB_PWR_SOFT_RESET 1
#define HB_PWR_HARD_RESET 2
#define HB_PWR_SHUTDOWN 3
#define PWRDOM_STAT_SATA 0x80000000
#define PWRDOM_STAT_PCI 0x40000000
#define PWRDOM_STAT_EMMC 0x20000000
#define HB_SCU_A9_PWR_NORMAL 0
#define HB_SCU_A9_PWR_DORMANT 2
#define HB_SCU_A9_PWR_OFF 3
DECLARE_GLOBAL_DATA_PTR;
void cphy_disable_overrides(void);
/*
* Miscellaneous platform dependent initialisations
*/
int board_init(void)
{
icache_enable();
return 0;
}
#ifdef CONFIG_SCSI_AHCI_PLAT
void scsi_init(void)
{
u32 reg = readl(HB_SREG_A9_PWRDOM_STAT);
cphy_disable_overrides();
if (reg & PWRDOM_STAT_SATA) {
ahci_init((void __iomem *)HB_AHCI_BASE);
scsi_scan(true);
}
}
#endif
#ifdef CONFIG_MISC_INIT_R
int misc_init_r(void)
{
char envbuffer[16];
u32 boot_choice;
boot_choice = readl(HB_SREG_A9_BOOT_SRC_STAT) & 0xff;
sprintf(envbuffer, "bootcmd%d", boot_choice);
if (env_get(envbuffer)) {
sprintf(envbuffer, "run bootcmd%d", boot_choice);
env_set("bootcmd", envbuffer);
} else
env_set("bootcmd", "");
return 0;
}
#endif
int dram_init(void)
{
return fdtdec_setup_mem_size_base();
}
int dram_init_banksize(void)
{
return fdtdec_setup_memory_banksize();
}
#if defined(CONFIG_OF_BOARD_SETUP)
int ft_board_setup(void *fdt, struct bd_info *bd)
{
static const char disabled[] = "disabled";
u32 reg = readl(HB_SREG_A9_PWRDOM_STAT);
if (!(reg & PWRDOM_STAT_SATA))
do_fixup_by_compat(fdt, "calxeda,hb-ahci", "status",
disabled, sizeof(disabled), 1);
if (!(reg & PWRDOM_STAT_EMMC))
do_fixup_by_compat(fdt, "calxeda,hb-sdhci", "status",
disabled, sizeof(disabled), 1);
return 0;
}
#endif
void *board_fdt_blob_setup(int *err)
{
*err = 0;
/*
* The ECME management processor loads the DTB from NOR flash
* into DRAM (at 4KB), where it gets patched to contain the
* detected memory size.
*/
return (void *)0x1000;
}
static int is_highbank(void)
{
uint32_t midr;
asm volatile ("mrc p15, 0, %0, c0, c0, 0\n" : "=r"(midr));
return (midr & 0xfff0) == 0xc090;
}
void reset_cpu(void)
{
writel(HB_PWR_HARD_RESET, HB_SREG_A9_PWR_REQ);
if (is_highbank())
writeb(HB_SCU_A9_PWR_OFF, HB_SCU_A9_PWR_STATUS);
else
writel(0x1, HB_SREG_A15_PWR_CTRL);
wfi();
}
/*
* turn off the override before transferring control to Linux, since Linux
* may not support spread spectrum.
*/
void arch_preboot_os(void)
{
cphy_disable_overrides();
}