mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 02:51:00 +00:00
7be044e4ea
Signed-off-by: Jon Loeliger <jdl@freescale.com>
354 lines
10 KiB
C
354 lines
10 KiB
C
/*
|
|
* (C) Copyright 2001
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
#define MV_VERSION "v0.2.0"
|
|
|
|
/* LED0 = Power , LED1 = Error , LED2-5 = error code, LED6-7=00 -->PPCBoot error */
|
|
#define ERR_NONE 0
|
|
#define ERR_ENV 1
|
|
#define ERR_BOOTM_BADMAGIC 2
|
|
#define ERR_BOOTM_BADCRC 3
|
|
#define ERR_BOOTM_GUNZIP 4
|
|
#define ERR_BOOTP_TIMEOUT 5
|
|
#define ERR_DHCP 6
|
|
#define ERR_TFTP 7
|
|
#define ERR_NOLAN 8
|
|
#define ERR_LANDRV 9
|
|
|
|
#define CONFIG_BOARD_TYPES 1
|
|
#define MVBLUE_BOARD_BOX 1
|
|
#define MVBLUE_BOARD_LYNX 2
|
|
|
|
#if 0
|
|
#define ERR_LED(code) do { if (code) \
|
|
*(volatile char *)(0xff000003) = ( 3 | (code<<4) ) & 0xf3; \
|
|
else \
|
|
*(volatile char *)(0xff000003) = ( 1 ); \
|
|
} while(0)
|
|
#else
|
|
#define ERR_LED(code)
|
|
#endif
|
|
|
|
#undef DEBUG
|
|
|
|
#define CONFIG_MPC824X 1
|
|
#define CONFIG_MPC8245 1
|
|
#define CONFIG_MVBLUE 1
|
|
|
|
#define CONFIG_CLOCKS_IN_MHZ 1
|
|
|
|
#define CONFIG_BOARD_TYPES 1
|
|
|
|
#define CONFIG_CONS_INDEX 1
|
|
#define CONFIG_BAUDRATE 115200
|
|
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
|
|
|
|
#define CONFIG_BOOTDELAY 3
|
|
#define CONFIG_BOOT_RETRY_TIME -1
|
|
|
|
#define CONFIG_AUTOBOOT_KEYED
|
|
#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds (stop with 's')...\n"
|
|
#define CONFIG_AUTOBOOT_STOP_STR "s"
|
|
#define CONFIG_ZERO_BOOTDELAY_CHECK
|
|
#define CONFIG_RESET_TO_RETRY 60
|
|
|
|
|
|
/*
|
|
* Command line configuration.
|
|
*/
|
|
|
|
#define CONFIG_CMD_ASKENV
|
|
#define CONFIG_CMD_BOOTD
|
|
#define CONFIG_CMD_CACHE
|
|
#define CONFIG_CMD_DHCP
|
|
#define CONFIG_CMD_ECHO
|
|
#define CONFIG_CMD_ENV
|
|
#define CONFIG_CMD_FLASH
|
|
#define CONFIG_CMD_IMI
|
|
#define CONFIG_CMD_IRQ
|
|
#define CONFIG_CMD_NET
|
|
#define CONFIG_CMD_PCI
|
|
#define CONFIG_CMD_RUN
|
|
|
|
|
|
/*
|
|
* BOOTP options
|
|
*/
|
|
#define CONFIG_BOOTP_SUBNETMASK
|
|
#define CONFIG_BOOTP_GATEWAY
|
|
#define CONFIG_BOOTP_HOSTNAME
|
|
#define CONFIG_BOOTP_BOOTPATH
|
|
#define CONFIG_BOOTP_BOOTFILESIZE
|
|
#define CONFIG_BOOTP_SUBNETMASK
|
|
#define CONFIG_BOOTP_GATEWAY
|
|
#define CONFIG_BOOTP_HOSTNAME
|
|
#define CONFIG_BOOTP_NISDOMAIN
|
|
#define CONFIG_BOOTP_BOOTPATH
|
|
#define CONFIG_BOOTP_DNS
|
|
#define CONFIG_BOOTP_DNS2
|
|
#define CONFIG_BOOTP_SEND_HOSTNAME
|
|
#define CONFIG_BOOTP_NTPSERVER
|
|
#define CONFIG_BOOTP_TIMEOFFSET
|
|
|
|
|
|
/*
|
|
* Miscellaneous configurable options
|
|
*/
|
|
#define CFG_LONGHELP /* undef to save memory */
|
|
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
|
|
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
|
|
|
|
#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
|
|
#define CFG_MAXARGS 16 /* Max number of command args */
|
|
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
|
|
#define CFG_LOAD_ADDR 0x00100000 /* Default load address */
|
|
|
|
#define CONFIG_BOOTCOMMAND "run nfsboot"
|
|
#define CONFIG_BOOTARGS "root=/dev/mtdblock5 ro rootfstype=jffs2"
|
|
|
|
#define CONFIG_NFSBOOTCOMMAND "bootp; run nfsargs addcons;bootm"
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"console_nr=0\0" \
|
|
"dhcp_client_id=mvBOX-XP\0" \
|
|
"dhcp_vendor-class-identifier=mvBOX\0" \
|
|
"adminboot=setenv bootargs root=/dev/mtdblock5 rw rootfstype=jffs2;run addcons;bootm ffc00000\0" \
|
|
"flashboot=setenv bootargs root=/dev/mtdblock5 ro rootfstype=jffs2;run addcons;bootm ffc00000\0" \
|
|
"safeboot=setenv bootargs root=/dev/mtdblock2 rw rootfstype=cramfs;run addcons;bootm ffc00000\0" \
|
|
"hdboot=setenv bootargs root=/dev/hda1;run addcons;bootm ffc00000\0" \
|
|
"nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
|
|
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off\0" \
|
|
"addcons=setenv bootargs ${bootargs} console=ttyS${console_nr},${baudrate}N8\0" \
|
|
"mv_version=" MV_VERSION "\0" \
|
|
"bootretry=30\0"
|
|
|
|
#define CONFIG_OVERWRITE_ETHADDR_ONCE
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* PCI stuff
|
|
*-----------------------------------------------------------------------
|
|
*/
|
|
|
|
#define CONFIG_PCI
|
|
#define CONFIG_PCI_PNP
|
|
#define CONFIG_PCI_SCAN_SHOW
|
|
|
|
#define CONFIG_NET_MULTI
|
|
#define CONFIG_NET_RETRY_COUNT 5
|
|
|
|
#define CONFIG_TULIP
|
|
#define CONFIG_TULIP_FIX_DAVICOM 1
|
|
#define CONFIG_ETHADDR b6:b4:45:eb:fb:c0
|
|
|
|
#define CONFIG_HW_WATCHDOG
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Start addresses for the final memory configuration
|
|
* (Set up by the startup code)
|
|
* Please note that CFG_SDRAM_BASE _must_ start at 0
|
|
*/
|
|
#define CFG_SDRAM_BASE 0x00000000
|
|
|
|
#define CFG_FLASH_BASE 0xFFF00000
|
|
#define CFG_MONITOR_BASE TEXT_BASE
|
|
|
|
#define CFG_RESET_ADDRESS 0xFFF00100
|
|
#define CFG_EUMB_ADDR 0xFC000000
|
|
|
|
#define CFG_MONITOR_LEN 0x00100000
|
|
#define CFG_MALLOC_LEN (512 << 10) /* Reserve some kB for malloc() */
|
|
|
|
#define CFG_MEMTEST_START 0x00100000 /* memtest works on */
|
|
#define CFG_MEMTEST_END 0x00800000 /* 1M ... 8M in DRAM */
|
|
|
|
/* Maximum amount of RAM. */
|
|
#define CFG_MAX_RAM_SIZE 0x10000000 /* 0 .. 256MB of (S)DRAM */
|
|
|
|
|
|
#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
|
|
#undef CFG_RAMBOOT
|
|
#else
|
|
#define CFG_RAMBOOT
|
|
#endif
|
|
|
|
#define CFG_ISA_IO 0xFE000000
|
|
|
|
/*
|
|
* serial configuration
|
|
*/
|
|
#define CFG_NS16550
|
|
#define CFG_NS16550_SERIAL
|
|
|
|
#define CFG_NS16550_REG_SIZE 1
|
|
|
|
#define CFG_NS16550_CLK get_bus_freq(0)
|
|
|
|
#define CFG_NS16550_COM1 (CFG_EUMB_ADDR + 0x4500)
|
|
#define CFG_NS16550_COM2 (CFG_EUMB_ADDR + 0x4600)
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Definitions for initial stack pointer and data area
|
|
*/
|
|
#define CFG_INIT_RAM_ADDR 0x40000000
|
|
#define CFG_INIT_RAM_END 0x1000
|
|
#define CFG_GBL_DATA_SIZE 128
|
|
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
|
|
|
|
/*
|
|
* Low Level Configuration Settings
|
|
* (address mappings, register initial values, etc.)
|
|
* You should know what you are doing if you make changes here.
|
|
* For the detail description refer to the MPC8240 user's manual.
|
|
*/
|
|
|
|
#define CONFIG_SYS_CLK_FREQ 33000000
|
|
#define CFG_HZ 10000
|
|
|
|
/* Bit-field values for MCCR1. */
|
|
#define CFG_ROMNAL 7
|
|
#define CFG_ROMFAL 11
|
|
|
|
/* Bit-field values for MCCR2. */
|
|
#define CFG_TSWAIT 0x5
|
|
#define CFG_REFINT 430
|
|
|
|
/* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4. */
|
|
#define CFG_BSTOPRE 121
|
|
|
|
/* Bit-field values for MCCR3. */
|
|
#define CFG_REFREC 8
|
|
|
|
/* Bit-field values for MCCR4. */
|
|
#define CFG_PRETOACT 3
|
|
#define CFG_ACTTOPRE 5
|
|
#define CFG_ACTORW 3
|
|
#define CFG_SDMODE_CAS_LAT 3
|
|
#define CFG_REGISTERD_TYPE_BUFFER 1
|
|
#define CFG_EXTROM 1
|
|
#define CFG_REGDIMM 0
|
|
#define CFG_DBUS_SIZE2 1
|
|
#define CFG_SDMODE_WRAP 0
|
|
|
|
#define CFG_PGMAX 0x32
|
|
#define CFG_SDRAM_DSCD 0x20
|
|
|
|
/* Memory bank settings.
|
|
* Only bits 20-29 are actually used from these vales to set the
|
|
* start/end addresses. The upper two bits will always be 0, and the lower
|
|
* 20 bits will be 0x00000 for a start address, or 0xfffff for an end
|
|
* address. Refer to the MPC8240 book.
|
|
*/
|
|
|
|
#define CFG_BANK0_START 0x00000000
|
|
#define CFG_BANK0_END (CFG_MAX_RAM_SIZE - 1)
|
|
#define CFG_BANK0_ENABLE 1
|
|
#define CFG_BANK1_START 0x3ff00000
|
|
#define CFG_BANK1_END 0x3fffffff
|
|
#define CFG_BANK1_ENABLE 0
|
|
#define CFG_BANK2_START 0x3ff00000
|
|
#define CFG_BANK2_END 0x3fffffff
|
|
#define CFG_BANK2_ENABLE 0
|
|
#define CFG_BANK3_START 0x3ff00000
|
|
#define CFG_BANK3_END 0x3fffffff
|
|
#define CFG_BANK3_ENABLE 0
|
|
#define CFG_BANK4_START 0x3ff00000
|
|
#define CFG_BANK4_END 0x3fffffff
|
|
#define CFG_BANK4_ENABLE 0
|
|
#define CFG_BANK5_START 0x3ff00000
|
|
#define CFG_BANK5_END 0x3fffffff
|
|
#define CFG_BANK5_ENABLE 0
|
|
#define CFG_BANK6_START 0x3ff00000
|
|
#define CFG_BANK6_END 0x3fffffff
|
|
#define CFG_BANK6_ENABLE 0
|
|
#define CFG_BANK7_START 0x3ff00000
|
|
#define CFG_BANK7_END 0x3fffffff
|
|
#define CFG_BANK7_ENABLE 0
|
|
|
|
#define CFG_ODCR 0xff
|
|
|
|
#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
|
|
#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
|
|
|
|
#define CFG_IBAT1L (CFG_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
|
|
#define CFG_IBAT1U (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
|
|
|
|
#define CFG_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
|
|
#define CFG_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
|
|
|
|
#define CFG_IBAT3L (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
|
|
#define CFG_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
|
|
|
|
#define CFG_DBAT0L CFG_IBAT0L
|
|
#define CFG_DBAT0U CFG_IBAT0U
|
|
#define CFG_DBAT1L CFG_IBAT1L
|
|
#define CFG_DBAT1U CFG_IBAT1U
|
|
#define CFG_DBAT2L CFG_IBAT2L
|
|
#define CFG_DBAT2U CFG_IBAT2U
|
|
#define CFG_DBAT3L CFG_IBAT3L
|
|
#define CFG_DBAT3U CFG_IBAT3U
|
|
|
|
/*
|
|
* For booting Linux, the board info and command line data
|
|
* have to be in the first 8 MB of memory, since this is
|
|
* the maximum mapped by the Linux kernel during initialization.
|
|
*/
|
|
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* FLASH organization
|
|
*/
|
|
#undef CFG_FLASH_PROTECTION
|
|
#define CFG_MAX_FLASH_BANKS 1 /* Max number of flash banks */
|
|
#define CFG_MAX_FLASH_SECT 63 /* Max number of sectors per flash */
|
|
|
|
#define CFG_FLASH_ERASE_TOUT 12000
|
|
#define CFG_FLASH_WRITE_TOUT 1000
|
|
|
|
|
|
#define CFG_ENV_IS_IN_FLASH
|
|
|
|
#define CFG_ENV_OFFSET 0x00010000
|
|
#define CFG_ENV_SIZE 0x00010000
|
|
#define CFG_ENV_SECT_SIZE 0x00010000
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Cache Configuration
|
|
*/
|
|
#define CFG_CACHELINE_SIZE 32
|
|
#if defined(CONFIG_CMD_KGDB)
|
|
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
|
|
#endif
|
|
|
|
/*
|
|
* Internal Definitions
|
|
*
|
|
* Boot Flags
|
|
*/
|
|
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
|
|
#define BOOTFLAG_WARM 0x02 /* Software reboot */
|
|
|
|
#endif /* __CONFIG_H */
|