u-boot/arch/arm/mach-davinci/misc.c
Tom Rini 01abae4d04 Remove various unused interrupt related code
With d53ecad92f some unused interrupt related code was removed.
However all of these options are currently unused.  Rather than migrate
some of these options to Kconfig we just remove the code in question.

The only related code changes here are that in some cases we use
CONFIG_STACKSIZE in non-IRQ related context.  In these cases we rename
and move the value local to the code in question.

Fixes: d53ecad92f ("Merge branch 'master' of git://git.denx.de/u-boot-sunxi")
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-04-06 20:42:18 -04:00

138 lines
3 KiB
C

/*
* Miscelaneous DaVinci functions.
*
* Copyright (C) 2009 Nick Thompson, GE Fanuc Ltd, <nick.thompson@gefanuc.com>
* Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
* Copyright (C) 2008 Lyrtech <www.lyrtech.com>
* Copyright (C) 2004 Texas Instruments.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <i2c.h>
#include <net.h>
#include <asm/arch/hardware.h>
#include <asm/io.h>
#include <asm/arch/davinci_misc.h>
DECLARE_GLOBAL_DATA_PTR;
#ifndef CONFIG_SPL_BUILD
int dram_init(void)
{
/* dram_init must store complete ramsize in gd->ram_size */
gd->ram_size = get_ram_size(
(void *)CONFIG_SYS_SDRAM_BASE,
CONFIG_MAX_RAM_BANK_SIZE);
return 0;
}
int dram_init_banksize(void)
{
gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
gd->bd->bi_dram[0].size = gd->ram_size;
return 0;
}
#endif
#ifdef CONFIG_DRIVER_TI_EMAC
/*
* Read ethernet MAC address from EEPROM for DVEVM compatible boards.
* Returns 1 if found, 0 otherwise.
*/
int dvevm_read_mac_address(uint8_t *buf)
{
#ifdef CONFIG_SYS_I2C_EEPROM_ADDR
/* Read MAC address. */
if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0x7F00,
CONFIG_SYS_I2C_EEPROM_ADDR_LEN, (uint8_t *) &buf[0], 6))
goto i2cerr;
/* Check that MAC address is valid. */
if (!is_valid_ethaddr(buf))
goto err;
return 1; /* Found */
i2cerr:
printf("Read from EEPROM @ 0x%02x failed\n",
CONFIG_SYS_I2C_EEPROM_ADDR);
err:
#endif /* CONFIG_SYS_I2C_EEPROM_ADDR */
return 0;
}
/*
* Set the mii mode as MII or RMII
*/
#if defined(CONFIG_SOC_DA8XX)
void davinci_emac_mii_mode_sel(int mode_sel)
{
int val;
val = readl(&davinci_syscfg_regs->cfgchip3);
if (mode_sel == 0)
val &= ~(1 << 8);
else
val |= (1 << 8);
writel(val, &davinci_syscfg_regs->cfgchip3);
}
#endif
/*
* If there is no MAC address in the environment, then it will be initialized
* (silently) from the value in the EEPROM.
*/
void davinci_sync_env_enetaddr(uint8_t *rom_enetaddr)
{
uint8_t env_enetaddr[6];
int ret;
ret = eth_getenv_enetaddr_by_index("eth", 0, env_enetaddr);
if (!ret) {
/*
* There is no MAC address in the environment, so we
* initialize it from the value in the EEPROM.
*/
debug("### Setting environment from EEPROM MAC address = "
"\"%pM\"\n",
env_enetaddr);
ret = !eth_setenv_enetaddr("ethaddr", rom_enetaddr);
}
if (!ret)
printf("Failed to set mac address from EEPROM: %d\n", ret);
}
#endif /* CONFIG_DRIVER_TI_EMAC */
#if defined(CONFIG_SOC_DA8XX)
void irq_init(void)
{
/*
* Mask all IRQs by clearing the global enable and setting
* the enable clear for all the 90 interrupts.
*/
writel(0, &davinci_aintc_regs->ger);
writel(0, &davinci_aintc_regs->hier);
writel(0xffffffff, &davinci_aintc_regs->ecr1);
writel(0xffffffff, &davinci_aintc_regs->ecr2);
writel(0xffffffff, &davinci_aintc_regs->ecr3);
}
/*
* Enable PSC for various peripherals.
*/
int da8xx_configure_lpsc_items(const struct lpsc_resource *item,
const int n_items)
{
int i;
for (i = 0; i < n_items; i++)
lpsc_on(item[i].lpsc_no);
return 0;
}
#endif