mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-02 17:41:08 +00:00
dd397609fc
Document SPI flash program steps for rockchip platforms. Suggested-by: Hugh Cole-Baker <sigmaris@gmail.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
199 lines
5.1 KiB
ReStructuredText
199 lines
5.1 KiB
ReStructuredText
.. SPDX-License-Identifier: GPL-2.0+
|
|
.. Copyright (C) 2019 Jagan Teki <jagan@amarulasolutions.com>
|
|
|
|
ROCKCHIP
|
|
========
|
|
|
|
About this
|
|
----------
|
|
|
|
This document describes the information about Rockchip supported boards
|
|
and it's usage steps.
|
|
|
|
Rockchip boards
|
|
---------------
|
|
|
|
Rockchip is SoC solutions provider for tablets & PCs, streaming media
|
|
TV boxes, AI audio & vision, IoT hardware.
|
|
|
|
A wide range of Rockchip SoCs with associated boardsare supported in
|
|
mainline U-Boot.
|
|
|
|
List of mainline supported rockchip boards:
|
|
|
|
* rk3036
|
|
- Rockchip Evb-RK3036 (evb-rk3036)
|
|
- Kylin (kylin_rk3036)
|
|
* rk3128
|
|
- Rockchip Evb-RK3128 (evb-rk3128)
|
|
* rk3229
|
|
- Rockchip Evb-RK3229 (evb-rk3229)
|
|
* rk3288
|
|
- Rockchip Evb-RK3288 (evb-rk3288)
|
|
- Firefly-RK3288 (firefly-rk3288)
|
|
- MQmaker MiQi (miqi-rk3288)
|
|
- Phytec RK3288 PCM-947 (phycore-rk3288)
|
|
- PopMetal-RK3288 (popmetal-rk3288)
|
|
- Radxa Rock 2 Square (rock2)
|
|
- Tinker-RK3288 (tinker-rk3288)
|
|
- Google Jerry (chromebook_jerry)
|
|
- Google Mickey (chromebook_mickey)
|
|
- Google Minnie (chromebook_minnie)
|
|
- Google Speedy (chromebook_speedy)
|
|
- Amarula Vyasa-RK3288 (vyasa-rk3288)
|
|
* rk3308
|
|
- Rockchip Evb-RK3308 (evb-rk3308)
|
|
- Roc-cc-RK3308 (roc-cc-rk3308)
|
|
* rk3328
|
|
- Rockchip Evb-RK3328 (evb-rk3328)
|
|
- Pine64 Rock64 (rock64-rk3328)
|
|
- Firefly-RK3328 (roc-cc-rk3328)
|
|
- Radxa Rockpi E (rock-pi-e-rk3328)
|
|
* rk3368
|
|
- GeekBox (geekbox)
|
|
- PX5 EVB (evb-px5)
|
|
- Rockchip Sheep (sheep-rk3368)
|
|
- Theobroma Systems RK3368-uQ7 SoM - Lion (lion-rk3368)
|
|
* rk3399
|
|
- 96boards RK3399 Ficus (ficus-rk3399)
|
|
- 96boards Rock960 (rock960-rk3399)
|
|
- Firefly-RK3399 (firefly_rk3399)
|
|
- Firefly ROC-RK3399-PC
|
|
- FriendlyElec NanoPC-T4 (nanopc-t4-rk3399)
|
|
- FriendlyElec NanoPi M4 (nanopi-m4-rk3399)
|
|
- FriendlyARM NanoPi NEO4 (nanopi-neo4-rk3399)
|
|
- Google Bob (chromebook_bob)
|
|
- Khadas Edge (khadas-edge-rk3399)
|
|
- Khadas Edge-Captain (khadas-edge-captain-rk3399)
|
|
- Khadas Edge-V (hadas-edge-v-rk3399)
|
|
- Orange Pi RK3399 (orangepi-rk3399)
|
|
- Pine64 RockPro64 (rockpro64-rk3399)
|
|
- Radxa ROCK Pi 4 (rock-pi-4-rk3399)
|
|
- Rockchip Evb-RK3399 (evb_rk3399)
|
|
- Theobroma Systems RK3399-Q7 SoM - Puma (puma_rk3399)
|
|
* rv1108
|
|
- Rockchip Evb-rv1108 (evb-rv1108)
|
|
- Elgin-R1 (elgin-rv1108)
|
|
* rv3188
|
|
- Radxa Rock (rock)
|
|
|
|
Building
|
|
--------
|
|
|
|
TF-A
|
|
^^^^
|
|
|
|
TF-A would require to build for ARM64 Rockchip SoCs platforms.
|
|
|
|
To build TF-A::
|
|
|
|
git clone https://github.com/ARM-software/arm-trusted-firmware.git
|
|
cd arm-trusted-firmware
|
|
make realclean
|
|
make CROSS_COMPILE=aarch64-linux-gnu- PLAT=rk3399
|
|
|
|
Specify the PLAT= with desired rockchip platform to build TF-A for.
|
|
|
|
U-Boot
|
|
^^^^^^
|
|
|
|
To build rk3328 boards::
|
|
|
|
export BL31=/path/to/arm-trusted-firmware/to/bl31.elf
|
|
make evb-rk3328_defconfig
|
|
make
|
|
|
|
To build rk3288 boards::
|
|
|
|
make evb-rk3288_defconfig
|
|
make
|
|
|
|
To build rk3368 boards::
|
|
|
|
export BL31=/path/to/arm-trusted-firmware/to/bl31.elf
|
|
make evb-px5_defconfig
|
|
make
|
|
|
|
To build rk3399 boards::
|
|
|
|
export BL31=/path/to/arm-trusted-firmware/to/bl31.elf
|
|
make evb-rk3399_defconfig
|
|
make
|
|
|
|
Flashing
|
|
--------
|
|
|
|
SD Card
|
|
^^^^^^^
|
|
|
|
All rockchip platforms, except rk3128 (which doesn't use SPL) are now
|
|
supporting single boot image using binman and pad_cat.
|
|
|
|
To write an image that boots from an SD card (assumed to be /dev/sda)::
|
|
|
|
sudo dd if=u-boot-rockchip.bin of=/dev/sda seek=64
|
|
sync
|
|
|
|
eMMC
|
|
^^^^
|
|
|
|
eMMC flash would probe on mmc0 in most of the rockchip platforms.
|
|
|
|
Create GPT partition layout as defined in configurations::
|
|
|
|
mmc dev 0
|
|
gpt write mmc 0 $partitions
|
|
|
|
Connect the USB-OTG cable between host and target device.
|
|
|
|
Launch fastboot at target::
|
|
|
|
fastboot 0
|
|
|
|
Upon successful gadget connection,host show the USB device like::
|
|
|
|
lsusb
|
|
Bus 001 Device 020: ID 2207:330c Fuzhou Rockchip Electronics Company RK3399 in Mask ROM mode
|
|
|
|
Program the flash::
|
|
|
|
sudo fastboot -i 0x2207 flash loader1 idbloader.img
|
|
sudo fastboot -i 0x2207 flash loader2 u-boot.itb
|
|
|
|
Note: for rockchip 32-bit platforms the U-Boot proper image
|
|
is u-boot-dtb.img
|
|
|
|
SPI
|
|
^^^
|
|
|
|
Generating idbloader for SPI boot would require to input a multi image
|
|
image format to mkimage tool instead of concerting (like for MMC boot).
|
|
|
|
SPL-alone SPI boot image::
|
|
|
|
./tools/mkimage -n rk3399 -T rkspi -d spl/u-boot-spl.bin idbloader.img
|
|
|
|
TPL+SPL SPI boot image::
|
|
|
|
./tools/mkimage -n rk3399 -T rkspi -d tpl/u-boot-tpl.bin:spl/u-boot-spl.bin idbloader.img
|
|
|
|
Copy SPI boot images into SD card and boot from SD::
|
|
|
|
sf probe
|
|
load mmc 1:1 $kernel_addr_r idbloader.img
|
|
sf erase 0 +$filesize
|
|
sf write $kernel_addr_r 0 ${filesize}
|
|
load mmc 1:1 ${kernel_addr_r} u-boot.itb
|
|
sf erase 0x60000 +$filesize
|
|
sf write $kernel_addr_r 0x60000 ${filesize}
|
|
|
|
TODO
|
|
----
|
|
|
|
- Add rockchip idbloader image building
|
|
- Add rockchip TPL image building
|
|
- Document SPI flash boot
|
|
- Add missing SoC's with it boards list
|
|
|
|
.. Jagan Teki <jagan@amarulasolutions.com>
|
|
.. Tuesday 02 June 2020 12:18:57 AM IST
|