u-boot/drivers/mtd/nand/Makefile
Siva Durga Prasad Paladugu e4b40e921d arasan: nfc: Add initial nand driver support for arasan
Added initial nand driver support for arasan nand flash
controller.This supports nand erase,nand read, nand write
This uses the hardware ECC for read and write operations
ZynqMP uses this  driver.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
[scottwood: Fix checkpatch warnings]
Signed-off-by: Scott Wood <oss@buserror.net>
2016-02-12 17:27:41 -06:00

81 lines
2.3 KiB
Makefile

#
# (C) Copyright 2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# SPDX-License-Identifier: GPL-2.0+
#
ifdef CONFIG_SPL_BUILD
ifdef CONFIG_SPL_NAND_DRIVERS
NORMAL_DRIVERS=y
endif
obj-$(CONFIG_SPL_NAND_AM33XX_BCH) += am335x_spl_bch.o
obj-$(CONFIG_SPL_NAND_DENALI) += denali_spl.o
obj-$(CONFIG_SPL_NAND_DOCG4) += docg4_spl.o
obj-$(CONFIG_SPL_NAND_SIMPLE) += nand_spl_simple.o
obj-$(CONFIG_SPL_NAND_LOAD) += nand_spl_load.o
obj-$(CONFIG_SPL_NAND_ECC) += nand_ecc.o
obj-$(CONFIG_SPL_NAND_BASE) += nand_base.o
obj-$(CONFIG_SPL_NAND_INIT) += nand.o
ifeq ($(CONFIG_SPL_ENV_SUPPORT),y)
obj-$(CONFIG_ENV_IS_IN_NAND) += nand_util.o
endif
else # not spl
NORMAL_DRIVERS=y
obj-y += nand.o
obj-y += nand_bbt.o
obj-y += nand_ids.o
obj-y += nand_util.o
obj-y += nand_ecc.o
obj-y += nand_base.o
obj-y += nand_timings.o
endif # not spl
ifdef NORMAL_DRIVERS
obj-$(CONFIG_NAND_ECC_BCH) += nand_bch.o
obj-$(CONFIG_NAND_ATMEL) += atmel_nand.o
obj-$(CONFIG_NAND_ARASAN) += arasan_nfc.o
obj-$(CONFIG_DRIVER_NAND_BFIN) += bfin_nand.o
obj-$(CONFIG_NAND_DAVINCI) += davinci_nand.o
obj-$(CONFIG_NAND_DENALI) += denali.o
obj-$(CONFIG_NAND_FSL_ELBC) += fsl_elbc_nand.o
obj-$(CONFIG_NAND_FSL_IFC) += fsl_ifc_nand.o
obj-$(CONFIG_NAND_FSL_UPM) += fsl_upm.o
obj-$(CONFIG_NAND_FSMC) += fsmc_nand.o
obj-$(CONFIG_NAND_JZ4740) += jz4740_nand.o
obj-$(CONFIG_NAND_KB9202) += kb9202_nand.o
obj-$(CONFIG_NAND_KIRKWOOD) += kirkwood_nand.o
obj-$(CONFIG_NAND_KMETER1) += kmeter1_nand.o
obj-$(CONFIG_NAND_LPC32XX_MLC) += lpc32xx_nand_mlc.o
obj-$(CONFIG_NAND_LPC32XX_SLC) += lpc32xx_nand_slc.o
obj-$(CONFIG_NAND_MPC5121_NFC) += mpc5121_nfc.o
obj-$(CONFIG_NAND_VF610_NFC) += vf610_nfc.o
obj-$(CONFIG_NAND_MXC) += mxc_nand.o
obj-$(CONFIG_NAND_MXS) += mxs_nand.o
obj-$(CONFIG_NAND_NDFC) += ndfc.o
obj-$(CONFIG_NAND_PXA3XX) += pxa3xx_nand.o
obj-$(CONFIG_NAND_S3C2410) += s3c2410_nand.o
obj-$(CONFIG_NAND_SPEAR) += spr_nand.o
obj-$(CONFIG_TEGRA_NAND) += tegra_nand.o
obj-$(CONFIG_NAND_OMAP_GPMC) += omap_gpmc.o
obj-$(CONFIG_NAND_OMAP_ELM) += omap_elm.o
obj-$(CONFIG_NAND_PLAT) += nand_plat.o
obj-$(CONFIG_NAND_DOCG4) += docg4.o
else # minimal SPL drivers
obj-$(CONFIG_NAND_FSL_ELBC) += fsl_elbc_spl.o
obj-$(CONFIG_NAND_FSL_IFC) += fsl_ifc_spl.o
obj-$(CONFIG_NAND_MXC) += mxc_nand_spl.o
obj-$(CONFIG_NAND_MXS) += mxs_nand_spl.o mxs_nand.o
obj-$(CONFIG_NAND_SUNXI) += sunxi_nand_spl.o
endif # drivers