u-boot/board/armltd/vexpress64/vexpress64.c
Simon Glass 9d922450aa dm: Use dm.h header when driver mode is used
This header includes things that are needed to make driver build. Adjust
existing users to include that always, even if other dm/ includes are
present

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01 06:57:52 -06:00

105 lines
2 KiB
C

/*
* (C) Copyright 2013
* David Feng <fenghua@phytium.com.cn>
* Sharma Bhupesh <bhupesh.sharma@freescale.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <dm.h>
#include <malloc.h>
#include <errno.h>
#include <netdev.h>
#include <asm/io.h>
#include <linux/compiler.h>
#include <dm/platform_data/serial_pl01x.h>
#include "pcie.h"
#include <asm/armv8/mmu.h>
DECLARE_GLOBAL_DATA_PTR;
static const struct pl01x_serial_platdata serial_platdata = {
.base = V2M_UART0,
.type = TYPE_PL011,
.clock = CONFIG_PL011_CLOCK,
};
U_BOOT_DEVICE(vexpress_serials) = {
.name = "serial_pl01x",
.platdata = &serial_platdata,
};
static struct mm_region vexpress64_mem_map[] = {
{
.virt = 0x0UL,
.phys = 0x0UL,
.size = 0x80000000UL,
.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
PTE_BLOCK_NON_SHARE |
PTE_BLOCK_PXN | PTE_BLOCK_UXN
}, {
.virt = 0x80000000UL,
.phys = 0x80000000UL,
.size = 0xff80000000UL,
.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
PTE_BLOCK_INNER_SHARE
}, {
/* List terminator */
0,
}
};
struct mm_region *mem_map = vexpress64_mem_map;
/* This function gets replaced by platforms supporting PCIe.
* The replacement function, eg. on Juno, initialises the PCIe bus.
*/
__weak void vexpress64_pcie_init(void)
{
}
int board_init(void)
{
vexpress64_pcie_init();
return 0;
}
int dram_init(void)
{
gd->ram_size = PHYS_SDRAM_1_SIZE;
return 0;
}
int dram_init_banksize(void)
{
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
#ifdef PHYS_SDRAM_2
gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
#endif
return 0;
}
/*
* Board specific reset that is system reset.
*/
void reset_cpu(ulong addr)
{
}
/*
* Board specific ethernet initialization routine.
*/
int board_eth_init(bd_t *bis)
{
int rc = 0;
#ifdef CONFIG_SMC91111
rc = smc91111_initialize(0, CONFIG_SMC91111_BASE);
#endif
#ifdef CONFIG_SMC911X
rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
#endif
return rc;
}