2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-28 22:13:08 +00:00
u-boot/board/solidrun/clearfog/clearfog.c
Chris Packham 0a6f0297c6 ARM: mvebu: x530: clearfog: Add ODT configuration
Commit 369e532691 ("ddr: marvell: a38x: allow board specific ODT
configuration") added the odt_config member to struct
mv_ddr_topology_map ahead of the clk_enable and ck_delay members. This
means that any boards that configured either of clk_enable or ck_delay
needed to have their board topology updated. This affects the x530 and
clearfog boards. Other A38x boards don't touch any of the trailing
members of mv_ddr_topology_map so don't need updating.

Fixes: 369e532691 ("ddr: marvell: a38x: allow board specific ODT configuration")
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-03-04 08:38:05 +01:00

263 lines
7.4 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2015 Stefan Roese <sr@denx.de>
*/
#include <common.h>
#include <env.h>
#include <i2c.h>
#include <init.h>
#include <miiphy.h>
#include <net.h>
#include <netdev.h>
#include <asm/global_data.h>
#include <asm/io.h>
#include <asm/arch/cpu.h>
#include <asm/arch/soc.h>
#include <linux/bitops.h>
#include <linux/delay.h>
#include "../common/tlv_data.h"
#include "../drivers/ddr/marvell/a38x/ddr3_init.h"
#include <../serdes/a38x/high_speed_env_spec.h>
DECLARE_GLOBAL_DATA_PTR;
/*
* Those values and defines are taken from the Marvell U-Boot version
* "u-boot-2013.01-15t1-clearfog"
*/
#define BOARD_GPP_OUT_ENA_LOW 0xffffffff
#define BOARD_GPP_OUT_ENA_MID 0xffffffff
#define BOARD_GPP_OUT_VAL_LOW 0x0
#define BOARD_GPP_OUT_VAL_MID 0x0
#define BOARD_GPP_POL_LOW 0x0
#define BOARD_GPP_POL_MID 0x0
static struct tlv_data cf_tlv_data;
static void cf_read_tlv_data(void)
{
static bool read_once;
if (read_once)
return;
read_once = true;
read_tlv_data(&cf_tlv_data);
}
/* The starting board_serdes_map reflects original Clearfog Pro usage */
static struct serdes_map board_serdes_map[] = {
{SATA0, SERDES_SPEED_3_GBPS, SERDES_DEFAULT_MODE, 0, 0},
{SGMII1, SERDES_SPEED_1_25_GBPS, SERDES_DEFAULT_MODE, 0, 0},
{PEX1, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0},
{USB3_HOST1, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0},
{PEX2, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0},
{SGMII2, SERDES_SPEED_1_25_GBPS, SERDES_DEFAULT_MODE, 0, 0},
};
void config_cfbase_serdes_map(void)
{
board_serdes_map[4].serdes_type = USB3_HOST0;
board_serdes_map[4].serdes_speed = SERDES_SPEED_5_GBPS;
board_serdes_map[4].serdes_mode = SERDES_DEFAULT_MODE;
}
int hws_board_topology_load(struct serdes_map **serdes_map_array, u8 *count)
{
cf_read_tlv_data();
/* Apply build configuration options before runtime configuration */
if (IS_ENABLED(CONFIG_CLEARFOG_SFP_25GB))
board_serdes_map[5].serdes_speed = SERDES_SPEED_3_125_GBPS;
if (IS_ENABLED(CONFIG_CLEARFOG_CON2_SATA)) {
board_serdes_map[4].serdes_type = SATA2;
board_serdes_map[4].serdes_speed = SERDES_SPEED_3_GBPS;
board_serdes_map[4].serdes_mode = SERDES_DEFAULT_MODE;
board_serdes_map[4].swap_rx = 1;
}
if (IS_ENABLED(CONFIG_CLEARFOG_CON3_SATA)) {
board_serdes_map[2].serdes_type = SATA1;
board_serdes_map[2].serdes_speed = SERDES_SPEED_3_GBPS;
board_serdes_map[2].serdes_mode = SERDES_DEFAULT_MODE;
board_serdes_map[2].swap_rx = 1;
}
/* Apply runtime detection changes */
if (sr_product_is(&cf_tlv_data, "Clearfog GTR")) {
board_serdes_map[0].serdes_type = PEX0;
board_serdes_map[0].serdes_speed = SERDES_SPEED_5_GBPS;
board_serdes_map[0].serdes_mode = PEX_ROOT_COMPLEX_X1;
} else if (sr_product_is(&cf_tlv_data, "Clearfog Pro")) {
/* handle recognized product as noop, no adjustment required */
} else if (sr_product_is(&cf_tlv_data, "Clearfog Base")) {
config_cfbase_serdes_map();
} else {
/*
* Fallback to static default. EEPROM TLV support is not
* enabled, runtime detection failed, hardware support is not
* present, EEPROM is corrupt, or an unrecognized product name
* is present.
*/
if (IS_ENABLED(CONFIG_SPL_CMD_TLV_EEPROM))
puts("EEPROM TLV detection failed: ");
puts("Using static config for ");
if (IS_ENABLED(CONFIG_TARGET_CLEARFOG_BASE)) {
puts("Clearfog Base.\n");
config_cfbase_serdes_map();
} else {
puts("Clearfog Pro.\n");
}
}
*serdes_map_array = board_serdes_map;
*count = ARRAY_SIZE(board_serdes_map);
return 0;
}
/*
* Define the DDR layout / topology here in the board file. This will
* be used by the DDR3 init code in the SPL U-Boot version to configure
* the DDR3 controller.
*/
static struct mv_ddr_topology_map board_topology_map = {
DEBUG_LEVEL_ERROR,
0x1, /* active interfaces */
/* cs_mask, mirror, dqs_swap, ck_swap X PUPs */
{ { { {0x1, 0, 0, 0},
{0x1, 0, 0, 0},
{0x1, 0, 0, 0},
{0x1, 0, 0, 0},
{0x1, 0, 0, 0} },
SPEED_BIN_DDR_1600K, /* speed_bin */
MV_DDR_DEV_WIDTH_16BIT, /* memory_width */
MV_DDR_DIE_CAP_4GBIT, /* mem_size */
MV_DDR_FREQ_800, /* frequency */
0, 0, /* cas_wl cas_l */
MV_DDR_TEMP_LOW, /* temperature */
MV_DDR_TIM_DEFAULT} }, /* timing */
BUS_MASK_32BIT, /* Busses mask */
MV_DDR_CFG_DEFAULT, /* ddr configuration data source */
NOT_COMBINED, /* ddr twin-die combined */
{ {0} }, /* raw spd data */
{0}, /* timing parameters */
{ {0} }, /* electrical configuration */
{0,}, /* electrical parameters */
0, /* ODT configuration */
0x3, /* clock enable mask */
};
struct mv_ddr_topology_map *mv_ddr_topology_map_get(void)
{
struct if_params *ifp = &board_topology_map.interface_params[0];
cf_read_tlv_data();
switch (cf_tlv_data.ram_size) {
case 4:
default:
ifp->memory_size = MV_DDR_DIE_CAP_4GBIT;
break;
case 8:
ifp->memory_size = MV_DDR_DIE_CAP_8GBIT;
break;
}
/* Return the board topology as defined in the board code */
return &board_topology_map;
}
int board_early_init_f(void)
{
/* Configure MPP */
writel(0x11111111, MVEBU_MPP_BASE + 0x00);
writel(0x11111111, MVEBU_MPP_BASE + 0x04);
writel(0x10400011, MVEBU_MPP_BASE + 0x08);
writel(0x22043333, MVEBU_MPP_BASE + 0x0c);
writel(0x44400002, MVEBU_MPP_BASE + 0x10);
writel(0x41144004, MVEBU_MPP_BASE + 0x14);
writel(0x40333333, MVEBU_MPP_BASE + 0x18);
writel(0x00004444, MVEBU_MPP_BASE + 0x1c);
/* Set GPP Out value */
writel(BOARD_GPP_OUT_VAL_LOW, MVEBU_GPIO0_BASE + 0x00);
writel(BOARD_GPP_OUT_VAL_MID, MVEBU_GPIO1_BASE + 0x00);
/* Set GPP Polarity */
writel(BOARD_GPP_POL_LOW, MVEBU_GPIO0_BASE + 0x0c);
writel(BOARD_GPP_POL_MID, MVEBU_GPIO1_BASE + 0x0c);
/* Set GPP Out Enable */
writel(BOARD_GPP_OUT_ENA_LOW, MVEBU_GPIO0_BASE + 0x04);
writel(BOARD_GPP_OUT_ENA_MID, MVEBU_GPIO1_BASE + 0x04);
return 0;
}
int board_init(void)
{
/* Address of boot parameters */
gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100;
/* Toggle GPIO41 to reset onboard switch and phy */
clrbits_le32(MVEBU_GPIO1_BASE + 0x0, BIT(9));
clrbits_le32(MVEBU_GPIO1_BASE + 0x4, BIT(9));
/* GPIO 19 on ClearFog rev 2.1 controls the uSOM onboard phy reset */
clrbits_le32(MVEBU_GPIO0_BASE + 0x0, BIT(19));
clrbits_le32(MVEBU_GPIO0_BASE + 0x4, BIT(19));
mdelay(1);
setbits_le32(MVEBU_GPIO1_BASE + 0x0, BIT(9));
setbits_le32(MVEBU_GPIO0_BASE + 0x0, BIT(19));
mdelay(10);
return 0;
}
int checkboard(void)
{
char *board = "Clearfog Pro";
if (IS_ENABLED(CONFIG_TARGET_CLEARFOG_BASE))
board = "Clearfog Base";
cf_read_tlv_data();
if (strlen(cf_tlv_data.tlv_product_name[0]) > 0)
board = cf_tlv_data.tlv_product_name[0];
printf("Board: SolidRun %s", board);
if (strlen(cf_tlv_data.tlv_product_name[1]) > 0)
printf(", %s", cf_tlv_data.tlv_product_name[1]);
puts("\n");
return 0;
}
int board_eth_init(struct bd_info *bis)
{
cpu_eth_init(bis); /* Built in controller(s) come first */
return pci_eth_init(bis);
}
int board_late_init(void)
{
if (env_get("fdtfile"))
return 0;
cf_read_tlv_data();
if (sr_product_is(&cf_tlv_data, "Clearfog Base"))
env_set("fdtfile", "armada-388-clearfog-base.dtb");
else if (sr_product_is(&cf_tlv_data, "Clearfog GTR S4"))
env_set("fdtfile", "armada-385-clearfog-gtr-s4.dtb");
else if (sr_product_is(&cf_tlv_data, "Clearfog GTR L8"))
env_set("fdtfile", "armada-385-clearfog-gtr-l8.dtb");
else if (IS_ENABLED(CONFIG_TARGET_CLEARFOG_BASE))
env_set("fdtfile", "armada-388-clearfog-base.dtb");
else
env_set("fdtfile", "armada-388-clearfog-pro.dtb");
return 0;
}