mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-22 11:13:07 +00:00
2827c2f07d
Due to usage of PREBOOT in Kconfig, macro CONFIG_PREBOOT is always defined when CONFIG_USE_PREBOOT is enabled. In case CONFIG_PREBOOT is not explicitly enabled it is set to empty C string and therefore '#ifdef CONFIG_PREBOOT' guard does not work. Fix this issue by introducing a new Kconfig symbol PREBOOT_DEFINED which cause to define new C macro CONFIG_PREBOOT_DEFINED only when CONFIG_PREBOOT is really defined. Change usage of '#ifdef CONFIG_PREBOOT' by '#ifdef CONFIG_USE_PREBOOT' for code which checks if preboot code would be called and by '#ifdef CONFIG_PREBOOT_DEFINED' for defining preboot code. Signed-off-by: Pali Rohár <pali@kernel.org>
1001 lines
27 KiB
C
1001 lines
27 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2010-2013 Freescale Semiconductor, Inc.
|
|
* Copyright (C) 2013, Boundary Devices <info@boundarydevices.com>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <env.h>
|
|
#include <init.h>
|
|
#include <net.h>
|
|
#include <asm/global_data.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/imx-regs.h>
|
|
#include <asm/arch/iomux.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <malloc.h>
|
|
#include <asm/arch/mx6-pins.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/errno.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm/mach-imx/iomux-v3.h>
|
|
#include <asm/mach-imx/mxc_i2c.h>
|
|
#include <asm/mach-imx/sata.h>
|
|
#include <asm/mach-imx/spi.h>
|
|
#include <asm/mach-imx/boot_mode.h>
|
|
#include <asm/mach-imx/video.h>
|
|
#include <fsl_esdhc_imx.h>
|
|
#include <micrel.h>
|
|
#include <miiphy.h>
|
|
#include <netdev.h>
|
|
#include <asm/arch/crm_regs.h>
|
|
#include <asm/arch/mxc_hdmi.h>
|
|
#include <i2c.h>
|
|
#include <input.h>
|
|
#include <netdev.h>
|
|
#include <usb/ehci-ci.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
#define GP_USB_OTG_PWR IMX_GPIO_NR(3, 22)
|
|
|
|
#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
|
|
PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \
|
|
PAD_CTL_SRE_FAST | PAD_CTL_HYS)
|
|
|
|
#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | \
|
|
PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm | \
|
|
PAD_CTL_SRE_FAST | PAD_CTL_HYS)
|
|
|
|
#define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
|
|
PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
|
|
|
|
#define SPI_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_SPEED_MED | \
|
|
PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST)
|
|
|
|
#define BUTTON_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
|
|
PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
|
|
|
|
#define I2C_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
|
|
PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \
|
|
PAD_CTL_ODE | PAD_CTL_SRE_FAST)
|
|
|
|
#define RGB_PAD_CTRL PAD_CTL_DSE_120ohm
|
|
|
|
#define WEAK_PULLUP (PAD_CTL_PUS_100K_UP | \
|
|
PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \
|
|
PAD_CTL_SRE_SLOW)
|
|
|
|
#define WEAK_PULLDOWN (PAD_CTL_PUS_100K_DOWN | \
|
|
PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \
|
|
PAD_CTL_HYS | PAD_CTL_SRE_SLOW)
|
|
|
|
#define OUTPUT_40OHM (PAD_CTL_SPEED_MED|PAD_CTL_DSE_40ohm)
|
|
|
|
/* Prevent compiler error if gpio number 08 or 09 is used */
|
|
#define not_octal(gp) ((((0x##gp >> 4) & 0xf) * 10) + ((0x##gp & 0xf)))
|
|
|
|
#define _I2C_PADS_INFO_CPU(cpu, i2cnum, scl_pad, scl_bank, scl_gp, \
|
|
sda_pad, sda_bank, sda_gp, pad_ctrl, join_io) { \
|
|
.scl = { \
|
|
.i2c_mode = NEW_PAD_CTRL(cpu##_PAD_##scl_pad##__##i2cnum##_SCL,\
|
|
pad_ctrl), \
|
|
.gpio_mode = NEW_PAD_CTRL( \
|
|
cpu##_PAD_##scl_pad##__GPIO##scl_bank##join_io##scl_gp,\
|
|
pad_ctrl), \
|
|
.gp = IMX_GPIO_NR(scl_bank, not_octal(scl_gp)) \
|
|
}, \
|
|
.sda = { \
|
|
.i2c_mode = NEW_PAD_CTRL(cpu##_PAD_##sda_pad##__##i2cnum##_SDA,\
|
|
pad_ctrl), \
|
|
.gpio_mode = NEW_PAD_CTRL( \
|
|
cpu##_PAD_##sda_pad##__GPIO##sda_bank##join_io##sda_gp,\
|
|
pad_ctrl), \
|
|
.gp = IMX_GPIO_NR(sda_bank, not_octal(sda_gp)) \
|
|
} \
|
|
}
|
|
|
|
#define I2C_PADS_INFO_CPU(cpu, i2cnum, scl_pad, scl_bank, scl_gp, \
|
|
sda_pad, sda_bank, sda_gp, pad_ctrl) \
|
|
_I2C_PADS_INFO_CPU(cpu, i2cnum, scl_pad, scl_bank, scl_gp, \
|
|
sda_pad, sda_bank, sda_gp, pad_ctrl, _IO)
|
|
|
|
#if defined(CONFIG_MX6QDL)
|
|
#define I2C_PADS_INFO_ENTRY(i2cnum, scl_pad, scl_bank, scl_gp, \
|
|
sda_pad, sda_bank, sda_gp, pad_ctrl) \
|
|
I2C_PADS_INFO_CPU(MX6Q, i2cnum, scl_pad, scl_bank, scl_gp, \
|
|
sda_pad, sda_bank, sda_gp, pad_ctrl), \
|
|
I2C_PADS_INFO_CPU(MX6DL, i2cnum, scl_pad, scl_bank, scl_gp, \
|
|
sda_pad, sda_bank, sda_gp, pad_ctrl)
|
|
#define I2C_PADS_INFO_ENTRY_SPACING 2
|
|
|
|
#define IOMUX_PAD_CTRL(name, pad_ctrl) \
|
|
NEW_PAD_CTRL(MX6Q_PAD_##name, pad_ctrl), \
|
|
NEW_PAD_CTRL(MX6DL_PAD_##name, pad_ctrl)
|
|
#else
|
|
#define I2C_PADS_INFO_ENTRY(i2cnum, scl_pad, scl_bank, scl_gp, \
|
|
sda_pad, sda_bank, sda_gp, pad_ctrl) \
|
|
I2C_PADS_INFO_CPU(MX6, i2cnum, scl_pad, scl_bank, scl_gp, \
|
|
sda_pad, sda_bank, sda_gp, pad_ctrl)
|
|
#define I2C_PADS_INFO_ENTRY_SPACING 1
|
|
|
|
#define IOMUX_PAD_CTRL(name, pad_ctrl) NEW_PAD_CTRL(MX6_PAD_##name, pad_ctrl)
|
|
#endif
|
|
|
|
int dram_init(void)
|
|
{
|
|
gd->ram_size = ((ulong)CONFIG_DDR_MB * 1024 * 1024);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static iomux_v3_cfg_t const uart1_pads[] = {
|
|
IOMUX_PAD_CTRL(SD3_DAT6__UART1_RX_DATA, UART_PAD_CTRL),
|
|
IOMUX_PAD_CTRL(SD3_DAT7__UART1_TX_DATA, UART_PAD_CTRL),
|
|
};
|
|
|
|
static iomux_v3_cfg_t const uart2_pads[] = {
|
|
IOMUX_PAD_CTRL(EIM_D26__UART2_TX_DATA, UART_PAD_CTRL),
|
|
IOMUX_PAD_CTRL(EIM_D27__UART2_RX_DATA, UART_PAD_CTRL),
|
|
};
|
|
|
|
static struct i2c_pads_info i2c_pads[] = {
|
|
/* I2C1, SGTL5000 */
|
|
I2C_PADS_INFO_ENTRY(I2C1, EIM_D21, 3, 21, EIM_D28, 3, 28, I2C_PAD_CTRL),
|
|
/* I2C2 Camera, MIPI */
|
|
I2C_PADS_INFO_ENTRY(I2C2, KEY_COL3, 4, 12, KEY_ROW3, 4, 13,
|
|
I2C_PAD_CTRL),
|
|
/* I2C3, J15 - RGB connector */
|
|
I2C_PADS_INFO_ENTRY(I2C3, GPIO_5, 1, 05, GPIO_16, 7, 11, I2C_PAD_CTRL),
|
|
};
|
|
|
|
#define I2C_BUS_CNT 3
|
|
|
|
static iomux_v3_cfg_t const usdhc2_pads[] = {
|
|
IOMUX_PAD_CTRL(SD2_CLK__SD2_CLK, USDHC_PAD_CTRL),
|
|
IOMUX_PAD_CTRL(SD2_CMD__SD2_CMD, USDHC_PAD_CTRL),
|
|
IOMUX_PAD_CTRL(SD2_DAT0__SD2_DATA0, USDHC_PAD_CTRL),
|
|
IOMUX_PAD_CTRL(SD2_DAT1__SD2_DATA1, USDHC_PAD_CTRL),
|
|
IOMUX_PAD_CTRL(SD2_DAT2__SD2_DATA2, USDHC_PAD_CTRL),
|
|
IOMUX_PAD_CTRL(SD2_DAT3__SD2_DATA3, USDHC_PAD_CTRL),
|
|
};
|
|
|
|
static iomux_v3_cfg_t const enet_pads1[] = {
|
|
IOMUX_PAD_CTRL(ENET_MDIO__ENET_MDIO, ENET_PAD_CTRL),
|
|
IOMUX_PAD_CTRL(ENET_MDC__ENET_MDC, ENET_PAD_CTRL),
|
|
IOMUX_PAD_CTRL(RGMII_TXC__RGMII_TXC, ENET_PAD_CTRL),
|
|
IOMUX_PAD_CTRL(RGMII_TD0__RGMII_TD0, ENET_PAD_CTRL),
|
|
IOMUX_PAD_CTRL(RGMII_TD1__RGMII_TD1, ENET_PAD_CTRL),
|
|
IOMUX_PAD_CTRL(RGMII_TD2__RGMII_TD2, ENET_PAD_CTRL),
|
|
IOMUX_PAD_CTRL(RGMII_TD3__RGMII_TD3, ENET_PAD_CTRL),
|
|
IOMUX_PAD_CTRL(RGMII_TX_CTL__RGMII_TX_CTL, ENET_PAD_CTRL),
|
|
IOMUX_PAD_CTRL(ENET_REF_CLK__ENET_TX_CLK, ENET_PAD_CTRL),
|
|
/* pin 35 - 1 (PHY_AD2) on reset */
|
|
IOMUX_PAD_CTRL(RGMII_RXC__GPIO6_IO30, NO_PAD_CTRL),
|
|
/* pin 32 - 1 - (MODE0) all */
|
|
IOMUX_PAD_CTRL(RGMII_RD0__GPIO6_IO25, NO_PAD_CTRL),
|
|
/* pin 31 - 1 - (MODE1) all */
|
|
IOMUX_PAD_CTRL(RGMII_RD1__GPIO6_IO27, NO_PAD_CTRL),
|
|
/* pin 28 - 1 - (MODE2) all */
|
|
IOMUX_PAD_CTRL(RGMII_RD2__GPIO6_IO28, NO_PAD_CTRL),
|
|
/* pin 27 - 1 - (MODE3) all */
|
|
IOMUX_PAD_CTRL(RGMII_RD3__GPIO6_IO29, NO_PAD_CTRL),
|
|
/* pin 33 - 1 - (CLK125_EN) 125Mhz clockout enabled */
|
|
IOMUX_PAD_CTRL(RGMII_RX_CTL__GPIO6_IO24, NO_PAD_CTRL),
|
|
/* pin 42 PHY nRST */
|
|
IOMUX_PAD_CTRL(EIM_D23__GPIO3_IO23, NO_PAD_CTRL),
|
|
IOMUX_PAD_CTRL(ENET_RXD0__GPIO1_IO27, NO_PAD_CTRL),
|
|
};
|
|
|
|
static iomux_v3_cfg_t const enet_pads2[] = {
|
|
IOMUX_PAD_CTRL(RGMII_RXC__RGMII_RXC, ENET_PAD_CTRL),
|
|
IOMUX_PAD_CTRL(RGMII_RD0__RGMII_RD0, ENET_PAD_CTRL),
|
|
IOMUX_PAD_CTRL(RGMII_RD1__RGMII_RD1, ENET_PAD_CTRL),
|
|
IOMUX_PAD_CTRL(RGMII_RD2__RGMII_RD2, ENET_PAD_CTRL),
|
|
IOMUX_PAD_CTRL(RGMII_RD3__RGMII_RD3, ENET_PAD_CTRL),
|
|
IOMUX_PAD_CTRL(RGMII_RX_CTL__RGMII_RX_CTL, ENET_PAD_CTRL),
|
|
};
|
|
|
|
static iomux_v3_cfg_t const misc_pads[] = {
|
|
IOMUX_PAD_CTRL(GPIO_1__USB_OTG_ID, WEAK_PULLUP),
|
|
IOMUX_PAD_CTRL(KEY_COL4__USB_OTG_OC, WEAK_PULLUP),
|
|
IOMUX_PAD_CTRL(EIM_D30__USB_H1_OC, WEAK_PULLUP),
|
|
/* OTG Power enable */
|
|
IOMUX_PAD_CTRL(EIM_D22__GPIO3_IO22, OUTPUT_40OHM),
|
|
};
|
|
|
|
/* wl1271 pads on nitrogen6x */
|
|
static iomux_v3_cfg_t const wl12xx_pads[] = {
|
|
IOMUX_PAD_CTRL(NANDF_CS1__GPIO6_IO14, WEAK_PULLDOWN),
|
|
IOMUX_PAD_CTRL(NANDF_CS2__GPIO6_IO15, OUTPUT_40OHM),
|
|
IOMUX_PAD_CTRL(NANDF_CS3__GPIO6_IO16, OUTPUT_40OHM),
|
|
};
|
|
#define WL12XX_WL_IRQ_GP IMX_GPIO_NR(6, 14)
|
|
#define WL12XX_WL_ENABLE_GP IMX_GPIO_NR(6, 15)
|
|
#define WL12XX_BT_ENABLE_GP IMX_GPIO_NR(6, 16)
|
|
|
|
/* Button assignments for J14 */
|
|
static iomux_v3_cfg_t const button_pads[] = {
|
|
/* Menu */
|
|
IOMUX_PAD_CTRL(NANDF_D1__GPIO2_IO01, BUTTON_PAD_CTRL),
|
|
/* Back */
|
|
IOMUX_PAD_CTRL(NANDF_D2__GPIO2_IO02, BUTTON_PAD_CTRL),
|
|
/* Labelled Search (mapped to Power under Android) */
|
|
IOMUX_PAD_CTRL(NANDF_D3__GPIO2_IO03, BUTTON_PAD_CTRL),
|
|
/* Home */
|
|
IOMUX_PAD_CTRL(NANDF_D4__GPIO2_IO04, BUTTON_PAD_CTRL),
|
|
/* Volume Down */
|
|
IOMUX_PAD_CTRL(GPIO_19__GPIO4_IO05, BUTTON_PAD_CTRL),
|
|
/* Volume Up */
|
|
IOMUX_PAD_CTRL(GPIO_18__GPIO7_IO13, BUTTON_PAD_CTRL),
|
|
};
|
|
|
|
static void setup_iomux_enet(void)
|
|
{
|
|
gpio_direction_output(IMX_GPIO_NR(3, 23), 0); /* SABRE Lite PHY rst */
|
|
gpio_direction_output(IMX_GPIO_NR(1, 27), 0); /* Nitrogen6X PHY rst */
|
|
gpio_direction_output(IMX_GPIO_NR(6, 30), 1);
|
|
gpio_direction_output(IMX_GPIO_NR(6, 25), 1);
|
|
gpio_direction_output(IMX_GPIO_NR(6, 27), 1);
|
|
gpio_direction_output(IMX_GPIO_NR(6, 28), 1);
|
|
gpio_direction_output(IMX_GPIO_NR(6, 29), 1);
|
|
SETUP_IOMUX_PADS(enet_pads1);
|
|
gpio_direction_output(IMX_GPIO_NR(6, 24), 1);
|
|
|
|
/* Need delay 10ms according to KSZ9021 spec */
|
|
udelay(1000 * 10);
|
|
gpio_set_value(IMX_GPIO_NR(3, 23), 1); /* SABRE Lite PHY reset */
|
|
gpio_set_value(IMX_GPIO_NR(1, 27), 1); /* Nitrogen6X PHY reset */
|
|
|
|
SETUP_IOMUX_PADS(enet_pads2);
|
|
udelay(100); /* Wait 100 us before using mii interface */
|
|
}
|
|
|
|
static iomux_v3_cfg_t const usb_pads[] = {
|
|
IOMUX_PAD_CTRL(GPIO_17__GPIO7_IO12, NO_PAD_CTRL),
|
|
};
|
|
|
|
static void setup_iomux_uart(void)
|
|
{
|
|
SETUP_IOMUX_PADS(uart1_pads);
|
|
SETUP_IOMUX_PADS(uart2_pads);
|
|
}
|
|
|
|
#ifdef CONFIG_USB_EHCI_MX6
|
|
int board_ehci_hcd_init(int port)
|
|
{
|
|
SETUP_IOMUX_PADS(usb_pads);
|
|
|
|
/* Reset USB hub */
|
|
gpio_direction_output(IMX_GPIO_NR(7, 12), 0);
|
|
mdelay(2);
|
|
gpio_set_value(IMX_GPIO_NR(7, 12), 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_ehci_power(int port, int on)
|
|
{
|
|
if (port)
|
|
return 0;
|
|
gpio_set_value(GP_USB_OTG_PWR, on);
|
|
return 0;
|
|
}
|
|
|
|
#endif
|
|
|
|
#ifdef CONFIG_MXC_SPI
|
|
int board_spi_cs_gpio(unsigned bus, unsigned cs)
|
|
{
|
|
return (bus == 0 && cs == 0) ? (IMX_GPIO_NR(3, 19)) : -1;
|
|
}
|
|
|
|
static iomux_v3_cfg_t const ecspi1_pads[] = {
|
|
/* SS1 */
|
|
IOMUX_PAD_CTRL(EIM_D19__GPIO3_IO19, NO_PAD_CTRL),
|
|
IOMUX_PAD_CTRL(EIM_D17__ECSPI1_MISO, SPI_PAD_CTRL),
|
|
IOMUX_PAD_CTRL(EIM_D18__ECSPI1_MOSI, SPI_PAD_CTRL),
|
|
IOMUX_PAD_CTRL(EIM_D16__ECSPI1_SCLK, SPI_PAD_CTRL),
|
|
};
|
|
|
|
static void setup_spi(void)
|
|
{
|
|
SETUP_IOMUX_PADS(ecspi1_pads);
|
|
}
|
|
#endif
|
|
|
|
int board_phy_config(struct phy_device *phydev)
|
|
{
|
|
/* min rx data delay */
|
|
ksz9021_phy_extended_write(phydev,
|
|
MII_KSZ9021_EXT_RGMII_RX_DATA_SKEW, 0x0);
|
|
/* min tx data delay */
|
|
ksz9021_phy_extended_write(phydev,
|
|
MII_KSZ9021_EXT_RGMII_TX_DATA_SKEW, 0x0);
|
|
/* max rx/tx clock delay, min rx/tx control */
|
|
ksz9021_phy_extended_write(phydev,
|
|
MII_KSZ9021_EXT_RGMII_CLOCK_SKEW, 0xf0f0);
|
|
if (phydev->drv->config)
|
|
phydev->drv->config(phydev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_eth_init(struct bd_info *bis)
|
|
{
|
|
uint32_t base = IMX_FEC_BASE;
|
|
struct mii_dev *bus = NULL;
|
|
struct phy_device *phydev = NULL;
|
|
int ret;
|
|
|
|
gpio_request(WL12XX_WL_IRQ_GP, "wifi_irq");
|
|
gpio_request(IMX_GPIO_NR(6, 30), "rgmii_rxc");
|
|
gpio_request(IMX_GPIO_NR(6, 25), "rgmii_rd0");
|
|
gpio_request(IMX_GPIO_NR(6, 27), "rgmii_rd1");
|
|
gpio_request(IMX_GPIO_NR(6, 28), "rgmii_rd2");
|
|
gpio_request(IMX_GPIO_NR(6, 29), "rgmii_rd3");
|
|
gpio_request(IMX_GPIO_NR(6, 24), "rgmii_rx_ctl");
|
|
gpio_request(IMX_GPIO_NR(3, 23), "rgmii_reset_sabrelite");
|
|
gpio_request(IMX_GPIO_NR(1, 27), "rgmii_reset_nitrogen6x");
|
|
setup_iomux_enet();
|
|
|
|
#ifdef CONFIG_FEC_MXC
|
|
bus = fec_get_miibus(base, -1);
|
|
if (!bus)
|
|
return -EINVAL;
|
|
/* scan phy 4,5,6,7 */
|
|
phydev = phy_find_by_mask(bus, (0xf << 4));
|
|
if (!phydev) {
|
|
ret = -EINVAL;
|
|
goto free_bus;
|
|
}
|
|
printf("using phy at %d\n", phydev->addr);
|
|
ret = fec_probe(bis, -1, base, bus, phydev);
|
|
if (ret)
|
|
goto free_phydev;
|
|
#endif
|
|
|
|
return 0;
|
|
|
|
free_phydev:
|
|
free(phydev);
|
|
free_bus:
|
|
free(bus);
|
|
return ret;
|
|
}
|
|
|
|
static void setup_buttons(void)
|
|
{
|
|
SETUP_IOMUX_PADS(button_pads);
|
|
}
|
|
|
|
#if defined(CONFIG_VIDEO_IPUV3)
|
|
|
|
static iomux_v3_cfg_t const backlight_pads[] = {
|
|
/* Backlight on RGB connector: J15 */
|
|
IOMUX_PAD_CTRL(SD1_DAT3__GPIO1_IO21, NO_PAD_CTRL),
|
|
#define RGB_BACKLIGHT_GP IMX_GPIO_NR(1, 21)
|
|
|
|
/* Backlight on LVDS connector: J6 */
|
|
IOMUX_PAD_CTRL(SD1_CMD__GPIO1_IO18, NO_PAD_CTRL),
|
|
#define LVDS_BACKLIGHT_GP IMX_GPIO_NR(1, 18)
|
|
};
|
|
|
|
static iomux_v3_cfg_t const rgb_pads[] = {
|
|
IOMUX_PAD_CTRL(DI0_DISP_CLK__IPU1_DI0_DISP_CLK, RGB_PAD_CTRL),
|
|
IOMUX_PAD_CTRL(DI0_PIN15__IPU1_DI0_PIN15, RGB_PAD_CTRL),
|
|
IOMUX_PAD_CTRL(DI0_PIN2__IPU1_DI0_PIN02, RGB_PAD_CTRL),
|
|
IOMUX_PAD_CTRL(DI0_PIN3__IPU1_DI0_PIN03, RGB_PAD_CTRL),
|
|
IOMUX_PAD_CTRL(DI0_PIN4__GPIO4_IO20, RGB_PAD_CTRL),
|
|
IOMUX_PAD_CTRL(DISP0_DAT0__IPU1_DISP0_DATA00, RGB_PAD_CTRL),
|
|
IOMUX_PAD_CTRL(DISP0_DAT1__IPU1_DISP0_DATA01, RGB_PAD_CTRL),
|
|
IOMUX_PAD_CTRL(DISP0_DAT2__IPU1_DISP0_DATA02, RGB_PAD_CTRL),
|
|
IOMUX_PAD_CTRL(DISP0_DAT3__IPU1_DISP0_DATA03, RGB_PAD_CTRL),
|
|
IOMUX_PAD_CTRL(DISP0_DAT4__IPU1_DISP0_DATA04, RGB_PAD_CTRL),
|
|
IOMUX_PAD_CTRL(DISP0_DAT5__IPU1_DISP0_DATA05, RGB_PAD_CTRL),
|
|
IOMUX_PAD_CTRL(DISP0_DAT6__IPU1_DISP0_DATA06, RGB_PAD_CTRL),
|
|
IOMUX_PAD_CTRL(DISP0_DAT7__IPU1_DISP0_DATA07, RGB_PAD_CTRL),
|
|
IOMUX_PAD_CTRL(DISP0_DAT8__IPU1_DISP0_DATA08, RGB_PAD_CTRL),
|
|
IOMUX_PAD_CTRL(DISP0_DAT9__IPU1_DISP0_DATA09, RGB_PAD_CTRL),
|
|
IOMUX_PAD_CTRL(DISP0_DAT10__IPU1_DISP0_DATA10, RGB_PAD_CTRL),
|
|
IOMUX_PAD_CTRL(DISP0_DAT11__IPU1_DISP0_DATA11, RGB_PAD_CTRL),
|
|
IOMUX_PAD_CTRL(DISP0_DAT12__IPU1_DISP0_DATA12, RGB_PAD_CTRL),
|
|
IOMUX_PAD_CTRL(DISP0_DAT13__IPU1_DISP0_DATA13, RGB_PAD_CTRL),
|
|
IOMUX_PAD_CTRL(DISP0_DAT14__IPU1_DISP0_DATA14, RGB_PAD_CTRL),
|
|
IOMUX_PAD_CTRL(DISP0_DAT15__IPU1_DISP0_DATA15, RGB_PAD_CTRL),
|
|
IOMUX_PAD_CTRL(DISP0_DAT16__IPU1_DISP0_DATA16, RGB_PAD_CTRL),
|
|
IOMUX_PAD_CTRL(DISP0_DAT17__IPU1_DISP0_DATA17, RGB_PAD_CTRL),
|
|
IOMUX_PAD_CTRL(DISP0_DAT18__IPU1_DISP0_DATA18, RGB_PAD_CTRL),
|
|
IOMUX_PAD_CTRL(DISP0_DAT19__IPU1_DISP0_DATA19, RGB_PAD_CTRL),
|
|
IOMUX_PAD_CTRL(DISP0_DAT20__IPU1_DISP0_DATA20, RGB_PAD_CTRL),
|
|
IOMUX_PAD_CTRL(DISP0_DAT21__IPU1_DISP0_DATA21, RGB_PAD_CTRL),
|
|
IOMUX_PAD_CTRL(DISP0_DAT22__IPU1_DISP0_DATA22, RGB_PAD_CTRL),
|
|
IOMUX_PAD_CTRL(DISP0_DAT23__IPU1_DISP0_DATA23, RGB_PAD_CTRL),
|
|
};
|
|
|
|
static void do_enable_hdmi(struct display_info_t const *dev)
|
|
{
|
|
imx_enable_hdmi_phy();
|
|
}
|
|
|
|
static int detect_i2c(struct display_info_t const *dev)
|
|
{
|
|
return ((0 == i2c_set_bus_num(dev->bus))
|
|
&&
|
|
(0 == i2c_probe(dev->addr)));
|
|
}
|
|
|
|
static void enable_lvds(struct display_info_t const *dev)
|
|
{
|
|
struct iomuxc *iomux = (struct iomuxc *)
|
|
IOMUXC_BASE_ADDR;
|
|
u32 reg = readl(&iomux->gpr[2]);
|
|
reg |= IOMUXC_GPR2_DATA_WIDTH_CH0_24BIT;
|
|
writel(reg, &iomux->gpr[2]);
|
|
gpio_direction_output(LVDS_BACKLIGHT_GP, 1);
|
|
}
|
|
|
|
static void enable_lvds_jeida(struct display_info_t const *dev)
|
|
{
|
|
struct iomuxc *iomux = (struct iomuxc *)
|
|
IOMUXC_BASE_ADDR;
|
|
u32 reg = readl(&iomux->gpr[2]);
|
|
reg |= IOMUXC_GPR2_DATA_WIDTH_CH0_24BIT
|
|
|IOMUXC_GPR2_BIT_MAPPING_CH0_JEIDA;
|
|
writel(reg, &iomux->gpr[2]);
|
|
gpio_direction_output(LVDS_BACKLIGHT_GP, 1);
|
|
}
|
|
|
|
static void enable_rgb(struct display_info_t const *dev)
|
|
{
|
|
SETUP_IOMUX_PADS(rgb_pads);
|
|
gpio_direction_output(RGB_BACKLIGHT_GP, 1);
|
|
}
|
|
|
|
struct display_info_t const displays[] = {{
|
|
.bus = 1,
|
|
.addr = 0x50,
|
|
.pixfmt = IPU_PIX_FMT_RGB24,
|
|
.detect = detect_i2c,
|
|
.enable = do_enable_hdmi,
|
|
.mode = {
|
|
.name = "HDMI",
|
|
.refresh = 60,
|
|
.xres = 1024,
|
|
.yres = 768,
|
|
.pixclock = 15385,
|
|
.left_margin = 220,
|
|
.right_margin = 40,
|
|
.upper_margin = 21,
|
|
.lower_margin = 7,
|
|
.hsync_len = 60,
|
|
.vsync_len = 10,
|
|
.sync = FB_SYNC_EXT,
|
|
.vmode = FB_VMODE_NONINTERLACED
|
|
} }, {
|
|
.bus = 0,
|
|
.addr = 0,
|
|
.pixfmt = IPU_PIX_FMT_RGB24,
|
|
.detect = NULL,
|
|
.enable = enable_lvds_jeida,
|
|
.mode = {
|
|
.name = "LDB-WXGA",
|
|
.refresh = 60,
|
|
.xres = 1280,
|
|
.yres = 800,
|
|
.pixclock = 14065,
|
|
.left_margin = 40,
|
|
.right_margin = 40,
|
|
.upper_margin = 3,
|
|
.lower_margin = 80,
|
|
.hsync_len = 10,
|
|
.vsync_len = 10,
|
|
.sync = FB_SYNC_EXT,
|
|
.vmode = FB_VMODE_NONINTERLACED
|
|
} }, {
|
|
.bus = 0,
|
|
.addr = 0,
|
|
.pixfmt = IPU_PIX_FMT_RGB24,
|
|
.detect = NULL,
|
|
.enable = enable_lvds,
|
|
.mode = {
|
|
.name = "LDB-WXGA-S",
|
|
.refresh = 60,
|
|
.xres = 1280,
|
|
.yres = 800,
|
|
.pixclock = 14065,
|
|
.left_margin = 40,
|
|
.right_margin = 40,
|
|
.upper_margin = 3,
|
|
.lower_margin = 80,
|
|
.hsync_len = 10,
|
|
.vsync_len = 10,
|
|
.sync = FB_SYNC_EXT,
|
|
.vmode = FB_VMODE_NONINTERLACED
|
|
} }, {
|
|
.bus = 2,
|
|
.addr = 0x4,
|
|
.pixfmt = IPU_PIX_FMT_LVDS666,
|
|
.detect = detect_i2c,
|
|
.enable = enable_lvds,
|
|
.mode = {
|
|
.name = "Hannstar-XGA",
|
|
.refresh = 60,
|
|
.xres = 1024,
|
|
.yres = 768,
|
|
.pixclock = 15385,
|
|
.left_margin = 220,
|
|
.right_margin = 40,
|
|
.upper_margin = 21,
|
|
.lower_margin = 7,
|
|
.hsync_len = 60,
|
|
.vsync_len = 10,
|
|
.sync = FB_SYNC_EXT,
|
|
.vmode = FB_VMODE_NONINTERLACED
|
|
} }, {
|
|
.bus = 0,
|
|
.addr = 0,
|
|
.pixfmt = IPU_PIX_FMT_LVDS666,
|
|
.detect = NULL,
|
|
.enable = enable_lvds,
|
|
.mode = {
|
|
.name = "LG-9.7",
|
|
.refresh = 60,
|
|
.xres = 1024,
|
|
.yres = 768,
|
|
.pixclock = 15385, /* ~65MHz */
|
|
.left_margin = 480,
|
|
.right_margin = 260,
|
|
.upper_margin = 16,
|
|
.lower_margin = 6,
|
|
.hsync_len = 250,
|
|
.vsync_len = 10,
|
|
.sync = FB_SYNC_EXT,
|
|
.vmode = FB_VMODE_NONINTERLACED
|
|
} }, {
|
|
.bus = 2,
|
|
.addr = 0x38,
|
|
.pixfmt = IPU_PIX_FMT_LVDS666,
|
|
.detect = detect_i2c,
|
|
.enable = enable_lvds,
|
|
.mode = {
|
|
.name = "wsvga-lvds",
|
|
.refresh = 60,
|
|
.xres = 1024,
|
|
.yres = 600,
|
|
.pixclock = 15385,
|
|
.left_margin = 220,
|
|
.right_margin = 40,
|
|
.upper_margin = 21,
|
|
.lower_margin = 7,
|
|
.hsync_len = 60,
|
|
.vsync_len = 10,
|
|
.sync = FB_SYNC_EXT,
|
|
.vmode = FB_VMODE_NONINTERLACED
|
|
} }, {
|
|
.bus = 2,
|
|
.addr = 0x10,
|
|
.pixfmt = IPU_PIX_FMT_RGB666,
|
|
.detect = detect_i2c,
|
|
.enable = enable_rgb,
|
|
.mode = {
|
|
.name = "fusion7",
|
|
.refresh = 60,
|
|
.xres = 800,
|
|
.yres = 480,
|
|
.pixclock = 33898,
|
|
.left_margin = 96,
|
|
.right_margin = 24,
|
|
.upper_margin = 3,
|
|
.lower_margin = 10,
|
|
.hsync_len = 72,
|
|
.vsync_len = 7,
|
|
.sync = 0x40000002,
|
|
.vmode = FB_VMODE_NONINTERLACED
|
|
} }, {
|
|
.bus = 0,
|
|
.addr = 0,
|
|
.pixfmt = IPU_PIX_FMT_RGB666,
|
|
.detect = NULL,
|
|
.enable = enable_rgb,
|
|
.mode = {
|
|
.name = "svga",
|
|
.refresh = 60,
|
|
.xres = 800,
|
|
.yres = 600,
|
|
.pixclock = 15385,
|
|
.left_margin = 220,
|
|
.right_margin = 40,
|
|
.upper_margin = 21,
|
|
.lower_margin = 7,
|
|
.hsync_len = 60,
|
|
.vsync_len = 10,
|
|
.sync = 0,
|
|
.vmode = FB_VMODE_NONINTERLACED
|
|
} }, {
|
|
.bus = 2,
|
|
.addr = 0x41,
|
|
.pixfmt = IPU_PIX_FMT_LVDS666,
|
|
.detect = detect_i2c,
|
|
.enable = enable_lvds,
|
|
.mode = {
|
|
.name = "amp1024x600",
|
|
.refresh = 60,
|
|
.xres = 1024,
|
|
.yres = 600,
|
|
.pixclock = 15385,
|
|
.left_margin = 220,
|
|
.right_margin = 40,
|
|
.upper_margin = 21,
|
|
.lower_margin = 7,
|
|
.hsync_len = 60,
|
|
.vsync_len = 10,
|
|
.sync = FB_SYNC_EXT,
|
|
.vmode = FB_VMODE_NONINTERLACED
|
|
} }, {
|
|
.bus = 0,
|
|
.addr = 0,
|
|
.pixfmt = IPU_PIX_FMT_LVDS666,
|
|
.detect = 0,
|
|
.enable = enable_lvds,
|
|
.mode = {
|
|
.name = "wvga-lvds",
|
|
.refresh = 57,
|
|
.xres = 800,
|
|
.yres = 480,
|
|
.pixclock = 15385,
|
|
.left_margin = 220,
|
|
.right_margin = 40,
|
|
.upper_margin = 21,
|
|
.lower_margin = 7,
|
|
.hsync_len = 60,
|
|
.vsync_len = 10,
|
|
.sync = FB_SYNC_EXT,
|
|
.vmode = FB_VMODE_NONINTERLACED
|
|
} }, {
|
|
.bus = 2,
|
|
.addr = 0x48,
|
|
.pixfmt = IPU_PIX_FMT_RGB666,
|
|
.detect = detect_i2c,
|
|
.enable = enable_rgb,
|
|
.mode = {
|
|
.name = "wvga-rgb",
|
|
.refresh = 57,
|
|
.xres = 800,
|
|
.yres = 480,
|
|
.pixclock = 37037,
|
|
.left_margin = 40,
|
|
.right_margin = 60,
|
|
.upper_margin = 10,
|
|
.lower_margin = 10,
|
|
.hsync_len = 20,
|
|
.vsync_len = 10,
|
|
.sync = 0,
|
|
.vmode = FB_VMODE_NONINTERLACED
|
|
} }, {
|
|
.bus = 0,
|
|
.addr = 0,
|
|
.pixfmt = IPU_PIX_FMT_RGB24,
|
|
.detect = NULL,
|
|
.enable = enable_rgb,
|
|
.mode = {
|
|
.name = "qvga",
|
|
.refresh = 60,
|
|
.xres = 320,
|
|
.yres = 240,
|
|
.pixclock = 37037,
|
|
.left_margin = 38,
|
|
.right_margin = 37,
|
|
.upper_margin = 16,
|
|
.lower_margin = 15,
|
|
.hsync_len = 30,
|
|
.vsync_len = 3,
|
|
.sync = 0,
|
|
.vmode = FB_VMODE_NONINTERLACED
|
|
} } };
|
|
size_t display_count = ARRAY_SIZE(displays);
|
|
|
|
int board_cfb_skip(void)
|
|
{
|
|
return NULL != env_get("novideo");
|
|
}
|
|
|
|
static void setup_display(void)
|
|
{
|
|
struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
|
|
struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
|
|
int reg;
|
|
|
|
enable_ipu_clock();
|
|
imx_setup_hdmi();
|
|
/* Turn on LDB0,IPU,IPU DI0 clocks */
|
|
reg = __raw_readl(&mxc_ccm->CCGR3);
|
|
reg |= MXC_CCM_CCGR3_LDB_DI0_MASK;
|
|
writel(reg, &mxc_ccm->CCGR3);
|
|
|
|
/* set LDB0, LDB1 clk select to 011/011 */
|
|
reg = readl(&mxc_ccm->cs2cdr);
|
|
reg &= ~(MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK
|
|
|MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK);
|
|
reg |= (3<<MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_OFFSET)
|
|
|(3<<MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_OFFSET);
|
|
writel(reg, &mxc_ccm->cs2cdr);
|
|
|
|
reg = readl(&mxc_ccm->cscmr2);
|
|
reg |= MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV;
|
|
writel(reg, &mxc_ccm->cscmr2);
|
|
|
|
reg = readl(&mxc_ccm->chsccdr);
|
|
reg |= (CHSCCDR_CLK_SEL_LDB_DI0
|
|
<<MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET);
|
|
writel(reg, &mxc_ccm->chsccdr);
|
|
|
|
reg = IOMUXC_GPR2_BGREF_RRMODE_EXTERNAL_RES
|
|
|IOMUXC_GPR2_DI1_VS_POLARITY_ACTIVE_HIGH
|
|
|IOMUXC_GPR2_DI0_VS_POLARITY_ACTIVE_LOW
|
|
|IOMUXC_GPR2_BIT_MAPPING_CH1_SPWG
|
|
|IOMUXC_GPR2_DATA_WIDTH_CH1_18BIT
|
|
|IOMUXC_GPR2_BIT_MAPPING_CH0_SPWG
|
|
|IOMUXC_GPR2_DATA_WIDTH_CH0_18BIT
|
|
|IOMUXC_GPR2_LVDS_CH1_MODE_DISABLED
|
|
|IOMUXC_GPR2_LVDS_CH0_MODE_ENABLED_DI0;
|
|
writel(reg, &iomux->gpr[2]);
|
|
|
|
reg = readl(&iomux->gpr[3]);
|
|
reg = (reg & ~(IOMUXC_GPR3_LVDS0_MUX_CTL_MASK
|
|
|IOMUXC_GPR3_HDMI_MUX_CTL_MASK))
|
|
| (IOMUXC_GPR3_MUX_SRC_IPU1_DI0
|
|
<<IOMUXC_GPR3_LVDS0_MUX_CTL_OFFSET);
|
|
writel(reg, &iomux->gpr[3]);
|
|
|
|
/* backlights off until needed */
|
|
SETUP_IOMUX_PADS(backlight_pads);
|
|
gpio_direction_input(LVDS_BACKLIGHT_GP);
|
|
gpio_direction_input(RGB_BACKLIGHT_GP);
|
|
}
|
|
#endif
|
|
|
|
static iomux_v3_cfg_t const init_pads[] = {
|
|
/* SGTL5000 sys_mclk */
|
|
IOMUX_PAD_CTRL(GPIO_0__CCM_CLKO1, OUTPUT_40OHM),
|
|
|
|
/* J5 - Camera MCLK */
|
|
IOMUX_PAD_CTRL(GPIO_3__CCM_CLKO2, OUTPUT_40OHM),
|
|
|
|
/* wl1271 pads on nitrogen6x */
|
|
/* WL12XX_WL_IRQ_GP */
|
|
IOMUX_PAD_CTRL(NANDF_CS1__GPIO6_IO14, WEAK_PULLDOWN),
|
|
/* WL12XX_WL_ENABLE_GP */
|
|
IOMUX_PAD_CTRL(NANDF_CS2__GPIO6_IO15, OUTPUT_40OHM),
|
|
/* WL12XX_BT_ENABLE_GP */
|
|
IOMUX_PAD_CTRL(NANDF_CS3__GPIO6_IO16, OUTPUT_40OHM),
|
|
/* USB otg power */
|
|
IOMUX_PAD_CTRL(EIM_D22__GPIO3_IO22, OUTPUT_40OHM),
|
|
IOMUX_PAD_CTRL(NANDF_D5__GPIO2_IO05, OUTPUT_40OHM),
|
|
IOMUX_PAD_CTRL(NANDF_WP_B__GPIO6_IO09, OUTPUT_40OHM),
|
|
IOMUX_PAD_CTRL(GPIO_8__GPIO1_IO08, OUTPUT_40OHM),
|
|
IOMUX_PAD_CTRL(GPIO_6__GPIO1_IO06, OUTPUT_40OHM),
|
|
};
|
|
|
|
#define WL12XX_WL_IRQ_GP IMX_GPIO_NR(6, 14)
|
|
|
|
static unsigned gpios_out_low[] = {
|
|
/* Disable wl1271 */
|
|
IMX_GPIO_NR(6, 15), /* disable wireless */
|
|
IMX_GPIO_NR(6, 16), /* disable bluetooth */
|
|
IMX_GPIO_NR(3, 22), /* disable USB otg power */
|
|
IMX_GPIO_NR(2, 5), /* ov5640 mipi camera reset */
|
|
IMX_GPIO_NR(1, 8), /* ov5642 reset */
|
|
};
|
|
|
|
static unsigned gpios_out_high[] = {
|
|
IMX_GPIO_NR(1, 6), /* ov5642 powerdown */
|
|
IMX_GPIO_NR(6, 9), /* ov5640 mipi camera power down */
|
|
};
|
|
|
|
static void set_gpios(unsigned *p, int cnt, int val)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < cnt; i++)
|
|
gpio_direction_output(*p++, val);
|
|
}
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
setup_iomux_uart();
|
|
|
|
set_gpios(gpios_out_high, ARRAY_SIZE(gpios_out_high), 1);
|
|
set_gpios(gpios_out_low, ARRAY_SIZE(gpios_out_low), 0);
|
|
gpio_direction_input(WL12XX_WL_IRQ_GP);
|
|
|
|
SETUP_IOMUX_PADS(wl12xx_pads);
|
|
SETUP_IOMUX_PADS(init_pads);
|
|
setup_buttons();
|
|
|
|
#if defined(CONFIG_VIDEO_IPUV3)
|
|
setup_display();
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Do not overwrite the console
|
|
* Use always serial for U-Boot console
|
|
*/
|
|
int overwrite_console(void)
|
|
{
|
|
return 1;
|
|
}
|
|
|
|
int board_init(void)
|
|
{
|
|
struct iomuxc *const iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
|
|
struct i2c_pads_info *p = i2c_pads;
|
|
int i;
|
|
int stride = 1;
|
|
|
|
#if defined(CONFIG_MX6QDL)
|
|
stride = 2;
|
|
if (!is_mx6dq() && !is_mx6dqp())
|
|
p += 1;
|
|
#endif
|
|
clrsetbits_le32(&iomuxc_regs->gpr[1],
|
|
IOMUXC_GPR1_OTG_ID_MASK,
|
|
IOMUXC_GPR1_OTG_ID_GPIO1);
|
|
|
|
SETUP_IOMUX_PADS(misc_pads);
|
|
|
|
/* address of boot parameters */
|
|
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
|
|
|
|
#ifdef CONFIG_MXC_SPI
|
|
setup_spi();
|
|
#endif
|
|
SETUP_IOMUX_PADS(usdhc2_pads);
|
|
for (i = 0; i < I2C_BUS_CNT; i++) {
|
|
setup_i2c(i, CONFIG_SYS_I2C_SPEED, 0x7f, p);
|
|
p += stride;
|
|
}
|
|
|
|
#ifdef CONFIG_SATA
|
|
setup_sata();
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
int checkboard(void)
|
|
{
|
|
int ret = gpio_get_value(WL12XX_WL_IRQ_GP);
|
|
|
|
if (ret < 0) {
|
|
/* The gpios have not been probed yet. Read it myself */
|
|
struct gpio_regs *regs = (struct gpio_regs *)GPIO6_BASE_ADDR;
|
|
int gpio = WL12XX_WL_IRQ_GP & 0x1f;
|
|
|
|
ret = (readl(®s->gpio_psr) >> gpio) & 0x01;
|
|
}
|
|
if (ret)
|
|
puts("Board: Nitrogen6X\n");
|
|
else
|
|
puts("Board: SABRE Lite\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
struct button_key {
|
|
char const *name;
|
|
unsigned gpnum;
|
|
char ident;
|
|
};
|
|
|
|
static struct button_key const buttons[] = {
|
|
{"back", IMX_GPIO_NR(2, 2), 'B'},
|
|
{"home", IMX_GPIO_NR(2, 4), 'H'},
|
|
{"menu", IMX_GPIO_NR(2, 1), 'M'},
|
|
{"search", IMX_GPIO_NR(2, 3), 'S'},
|
|
{"volup", IMX_GPIO_NR(7, 13), 'V'},
|
|
{"voldown", IMX_GPIO_NR(4, 5), 'v'},
|
|
};
|
|
|
|
/*
|
|
* generate a null-terminated string containing the buttons pressed
|
|
* returns number of keys pressed
|
|
*/
|
|
static int read_keys(char *buf)
|
|
{
|
|
int i, numpressed = 0;
|
|
for (i = 0; i < ARRAY_SIZE(buttons); i++) {
|
|
if (!gpio_get_value(buttons[i].gpnum))
|
|
buf[numpressed++] = buttons[i].ident;
|
|
}
|
|
buf[numpressed] = '\0';
|
|
return numpressed;
|
|
}
|
|
|
|
static int do_kbd(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
|
|
{
|
|
char envvalue[ARRAY_SIZE(buttons)+1];
|
|
int numpressed = read_keys(envvalue);
|
|
env_set("keybd", envvalue);
|
|
return numpressed == 0;
|
|
}
|
|
|
|
U_BOOT_CMD(
|
|
kbd, 1, 1, do_kbd,
|
|
"Tests for keypresses, sets 'keybd' environment variable",
|
|
"Returns 0 (true) to shell if key is pressed."
|
|
);
|
|
|
|
#ifdef CONFIG_USE_PREBOOT
|
|
static char const kbd_magic_prefix[] = "key_magic";
|
|
static char const kbd_command_prefix[] = "key_cmd";
|
|
|
|
static void preboot_keys(void)
|
|
{
|
|
int numpressed;
|
|
char keypress[ARRAY_SIZE(buttons)+1];
|
|
numpressed = read_keys(keypress);
|
|
if (numpressed) {
|
|
char *kbd_magic_keys = env_get("magic_keys");
|
|
char *suffix;
|
|
/*
|
|
* loop over all magic keys
|
|
*/
|
|
for (suffix = kbd_magic_keys; *suffix; ++suffix) {
|
|
char *keys;
|
|
char magic[sizeof(kbd_magic_prefix) + 1];
|
|
sprintf(magic, "%s%c", kbd_magic_prefix, *suffix);
|
|
keys = env_get(magic);
|
|
if (keys) {
|
|
if (!strcmp(keys, keypress))
|
|
break;
|
|
}
|
|
}
|
|
if (*suffix) {
|
|
char cmd_name[sizeof(kbd_command_prefix) + 1];
|
|
char *cmd;
|
|
sprintf(cmd_name, "%s%c", kbd_command_prefix, *suffix);
|
|
cmd = env_get(cmd_name);
|
|
if (cmd) {
|
|
env_set("preboot", cmd);
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_CMD_BMODE
|
|
static const struct boot_mode board_boot_modes[] = {
|
|
/* 4 bit bus width */
|
|
{"mmc0", MAKE_CFGVAL(0x40, 0x30, 0x00, 0x00)},
|
|
{"mmc1", MAKE_CFGVAL(0x40, 0x38, 0x00, 0x00)},
|
|
{NULL, 0},
|
|
};
|
|
#endif
|
|
|
|
int misc_init_r(void)
|
|
{
|
|
gpio_request(RGB_BACKLIGHT_GP, "lvds backlight");
|
|
gpio_request(LVDS_BACKLIGHT_GP, "lvds backlight");
|
|
gpio_request(GP_USB_OTG_PWR, "usbotg power");
|
|
gpio_request(IMX_GPIO_NR(7, 12), "usbh1 hub reset");
|
|
gpio_request(IMX_GPIO_NR(2, 2), "back");
|
|
gpio_request(IMX_GPIO_NR(2, 4), "home");
|
|
gpio_request(IMX_GPIO_NR(2, 1), "menu");
|
|
gpio_request(IMX_GPIO_NR(2, 3), "search");
|
|
gpio_request(IMX_GPIO_NR(7, 13), "volup");
|
|
gpio_request(IMX_GPIO_NR(4, 5), "voldown");
|
|
#ifdef CONFIG_USE_PREBOOT
|
|
preboot_keys();
|
|
#endif
|
|
|
|
#ifdef CONFIG_CMD_BMODE
|
|
add_board_boot_modes(board_boot_modes);
|
|
#endif
|
|
env_set_hex("reset_cause", get_imx_reset_cause());
|
|
return 0;
|
|
}
|