mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-19 17:53:08 +00:00
3a7943a90c
In order to boot over USB, the device tree needs to enable a few extra nodes in SPL. Since the USB driver has the ability to detect host/device, the dr_mode can be removed from the device tree since it needs to act as a device when booting and OTG is the default mode. Add USB boot support to spl_board_boot_device and enable the corresponding config options. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Fabio Estevam <festevam@denx.de> |
||
|---|---|---|
| .. | ||
| imx8mm_beacon.c | ||
| imximage-8mm-lpddr4.cfg | ||
| Kconfig | ||
| lpddr4_timing.c | ||
| MAINTAINERS | ||
| Makefile | ||
| README | ||
| spl.c | ||
U-Boot for the Beacon EmbeddedWorks Devkit Quick Start =========== - Build the ARM Trusted firmware binary - Get ddr firmware - Build U-Boot - Boot Get and Build the ARM Trusted firmware ====================================== Note: $(srctree) is U-Boot source directory $ git clone https://source.codeaurora.org/external/imx/imx-atf $ git lf-5.10.72-2.2.0 $ make PLAT=imx8mm bl31 CROSS_COMPILE=aarch64-linux-gnu- $ cp build/imx8mm/release/bl31.bin $(srctree) Get the DDR firmware ==================== $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.9.bin $ chmod +x firmware-imx-8.9.bin $ ./firmware-imx-8.9 $ cp firmware-imx-8.9/firmware/ddr/synopsys/lpddr4*.bin $(srctree) Build U-Boot ============ $ make imx8mm_beacon_defconfig $ make CROSS_COMPILE=aarch64-linux-gnu- Burn U-Boot to microSD Card =========================== $ sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=33 Boot ==== Set Boot switch to SD boot