mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-10 15:14:43 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
233 lines
7.6 KiB
C
233 lines
7.6 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* (C) Copyright 2000
|
|
* Rob Taylor, Flying Pig Systems. robt@flyingpig.com.
|
|
*/
|
|
|
|
#ifndef _NS87308_H_
|
|
#define _NS87308_H_
|
|
|
|
#include <asm/pci_io.h>
|
|
|
|
/* Note: I couldn't find a full data sheet for the ns87308, but the ns87307 seems to be pretty
|
|
functionally- (and pin-) equivalent to the 87308, but the 308 has better ir support. */
|
|
|
|
void initialise_ns87308(void);
|
|
|
|
/*
|
|
* The following struct represents the GPIO registers on the NS87308/NS97307
|
|
*/
|
|
struct GPIO
|
|
{
|
|
unsigned char dta1; /* 0 data port 1 */
|
|
unsigned char dir1; /* 1 direction port 1 */
|
|
unsigned char out1; /* 2 output type port 1 */
|
|
unsigned char puc1; /* 3 pull-up control port 1 */
|
|
unsigned char dta2; /* 4 data port 2 */
|
|
unsigned char dir2; /* 5 direction port 2 */
|
|
unsigned char out2; /* 6 output type port 2 */
|
|
unsigned char puc2; /* 7 pull-up control port 2 */
|
|
};
|
|
|
|
/*
|
|
* The following represents the power management registers on the NS87308/NS97307
|
|
*/
|
|
#define PWM_FER1 0 /* 0 function enable reg. 1 */
|
|
#define PWM_FER2 1 /* 1 function enable reg. 2 */
|
|
#define PWM_PMC1 2 /* 2 power mgmt. control 1 */
|
|
#define PWM_PMC2 3 /* 3 power mgmt. control 2 */
|
|
#define PWM_PMC3 4 /* 4 power mgmt. control 3 */
|
|
#define PWM_WDTO 5 /* 5 watchdog time-out */
|
|
#define PWM_WDCF 6 /* 6 watchdog config. */
|
|
#define PWM_WDST 7 /* 7 watchdog status */
|
|
|
|
/*PNP config registers:
|
|
* these depend on the stated of BADDR1 and BADDR0 on startup
|
|
* so there's three versions here with the last two digits indicating
|
|
* for which configuration their valid
|
|
* the 1st of the two digits indicates the state of BADDR1
|
|
* the 2st of the two digits indicates the state of BADDR0
|
|
*/
|
|
|
|
|
|
#define IO_INDEX_OFFSET_0x 0x0279 /* full PnP isa Mode */
|
|
#define IO_INDEX_OFFSET_10 0x015C /* PnP motherboard mode */
|
|
#define IO_INDEX_OFFSET_11 0x002E /* PnP motherboard mode */
|
|
#define IO_DATA_OFFSET_0x 0x0A79 /* full PnP isa Mode */
|
|
#define IO_DATA_OFFSET_10 0x015D /* PnP motherboard mode */
|
|
#define IO_DATA_OFFSET_11 0x002F /* PnP motherboard mode */
|
|
|
|
#if defined(CONFIG_SYS_NS87308_BADDR_0x)
|
|
#define IO_INDEX (CONFIG_SYS_ISA_IO + IO_INDEX_OFFSET_0x)
|
|
#define IO_DATA (CONFIG_SYS_ISA_IO + IO_DATA_OFFSET_0x)
|
|
#elif defined(CONFIG_SYS_NS87308_BADDR_10)
|
|
#define IO_INDEX (CONFIG_SYS_ISA_IO + IO_INDEX_OFFSET_10)
|
|
#define IO_DATA (CONFIG_SYS_ISA_IO + IO_DATA_OFFSET_10)
|
|
#elif defined(CONFIG_SYS_NS87308_BADDR_11)
|
|
#define IO_INDEX (CONFIG_SYS_ISA_IO + IO_INDEX_OFFSET_11)
|
|
#define IO_DATA (CONFIG_SYS_ISA_IO + IO_DATA_OFFSET_11)
|
|
#endif
|
|
|
|
/* PnP register definitions */
|
|
|
|
#define SET_RD_DATA_PORT 0x00
|
|
#define SERIAL_ISOLATION 0x01
|
|
#define CONFIG_CONTROL 0x02
|
|
#define WAKE_CSN 0x03
|
|
#define RES_DATA 0x04
|
|
#define STATUS 0x05
|
|
#define SET_CSN 0x06
|
|
#define LOGICAL_DEVICE 0x07
|
|
|
|
/*vendor defined values */
|
|
#define SID_REG 0x20
|
|
#define SUPOERIO_CONF1 0x21
|
|
#define SUPOERIO_CONF2 0x22
|
|
#define PGCS_INDEX 0x23
|
|
#define PGCS_DATA 0x24
|
|
|
|
/* values above 30 are different for each logical device
|
|
but I can't be arsed to enter them all. the ones here
|
|
are pretty consistent between all logical devices
|
|
feel free to correct the situation if you want.. ;)
|
|
*/
|
|
#define ACTIVATE 0x30
|
|
#define ACTIVATE_OFF 0x00
|
|
#define ACTIVATE_ON 0x01
|
|
|
|
#define BASE_ADDR_HIGH 0x60
|
|
#define BASE_ADDR_LOW 0x61
|
|
#define LUN_CONFIG_REG 0xF0
|
|
#define DBASE_HIGH 0x60 /* SIO KBC data base address, 15:8 */
|
|
#define DBASE_LOW 0x61 /* SIO KBC data base address, 7:0 */
|
|
#define CBASE_HIGH 0x62 /* SIO KBC command base addr, 15:8 */
|
|
#define CBASE_LOW 0x63 /* SIO KBC command base addr, 7:0 */
|
|
|
|
/* the logical devices*/
|
|
#define LDEV_KBC1 0x00 /* 2 devices for keyboard and mouse controller*/
|
|
#define LDEV_KBC2 0x01
|
|
#define LDEV_MOUSE 0x01
|
|
#define LDEV_RTC_APC 0x02 /*Real Time Clock and Advanced Power Control*/
|
|
#define LDEV_FDC 0x03 /*floppy disk controller*/
|
|
#define LDEV_PARP 0x04 /*Parallel port*/
|
|
#define LDEV_UART2 0x05
|
|
#define LDEV_UART1 0x06
|
|
#define LDEV_GPIO 0x07 /*General Purpose IO and chip select output signals*/
|
|
#define LDEV_POWRMAN 0x08 /*Power Managment*/
|
|
|
|
#define CONFIG_SYS_NS87308_KBC1 (1 << LDEV_KBC1)
|
|
#define CONFIG_SYS_NS87308_KBC2 (1 << LDEV_KBC2)
|
|
#define CONFIG_SYS_NS87308_MOUSE (1 << LDEV_MOUSE)
|
|
#define CONFIG_SYS_NS87308_RTC_APC (1 << LDEV_RTC_APC)
|
|
#define CONFIG_SYS_NS87308_FDC (1 << LDEV_FDC)
|
|
#define CONFIG_SYS_NS87308_PARP (1 << LDEV_PARP)
|
|
#define CONFIG_SYS_NS87308_UART2 (1 << LDEV_UART2)
|
|
#define CONFIG_SYS_NS87308_UART1 (1 << LDEV_UART1)
|
|
#define CONFIG_SYS_NS87308_GPIO (1 << LDEV_GPIO)
|
|
#define CONFIG_SYS_NS87308_POWRMAN (1 << LDEV_POWRMAN)
|
|
|
|
/*some functions and macro's for doing configuration */
|
|
|
|
static inline void read_pnp_config(unsigned char index, unsigned char *data)
|
|
{
|
|
pci_writeb(index,IO_INDEX);
|
|
pci_readb(IO_DATA, *data);
|
|
}
|
|
|
|
static inline void write_pnp_config(unsigned char index, unsigned char data)
|
|
{
|
|
pci_writeb(index,IO_INDEX);
|
|
pci_writeb(data, IO_DATA);
|
|
}
|
|
|
|
static inline void pnp_set_device(unsigned char dev)
|
|
{
|
|
write_pnp_config(LOGICAL_DEVICE, dev);
|
|
}
|
|
|
|
static inline void write_pm_reg(unsigned short base, unsigned char index, unsigned char data)
|
|
{
|
|
pci_writeb(index, CONFIG_SYS_ISA_IO + base);
|
|
eieio();
|
|
pci_writeb(data, CONFIG_SYS_ISA_IO + base + 1);
|
|
}
|
|
|
|
/*void write_pnp_config(unsigned char index, unsigned char data);
|
|
void pnp_set_device(unsigned char dev);
|
|
*/
|
|
|
|
#define PNP_SET_DEVICE_BASE(dev,base) \
|
|
pnp_set_device(dev); \
|
|
write_pnp_config(ACTIVATE, ACTIVATE_OFF); \
|
|
write_pnp_config(BASE_ADDR_HIGH, ((base) >> 8) & 0xff ); \
|
|
write_pnp_config(BASE_ADDR_LOW, (base) &0xff); \
|
|
write_pnp_config(ACTIVATE, ACTIVATE_ON);
|
|
|
|
#define PNP_ACTIVATE_DEVICE(dev) \
|
|
pnp_set_device(dev); \
|
|
write_pnp_config(ACTIVATE, ACTIVATE_ON);
|
|
|
|
#define PNP_DEACTIVATE_DEVICE(dev) \
|
|
pnp_set_device(dev); \
|
|
write_pnp_config(ACTIVATE, ACTIVATE_OFF);
|
|
|
|
|
|
static inline void write_pgcs_config(unsigned char index, unsigned char data)
|
|
{
|
|
write_pnp_config(PGCS_INDEX, index);
|
|
write_pnp_config(PGCS_DATA, data);
|
|
}
|
|
|
|
/* these macrose configure the 3 CS lines
|
|
on the sandpoint board these controll NVRAM
|
|
CS0 is connected to NVRAMCS
|
|
CS1 is connected to NVRAMAS0
|
|
CS2 is connected to NVRAMAS1
|
|
*/
|
|
#define PGCS_CS_ASSERT_ON_WRITE 0x10
|
|
#define PGCS_CS_ASSERT_ON_READ 0x20
|
|
|
|
#define PNP_PGCS_CSLINE_BASE(cs, base) \
|
|
write_pgcs_config((cs) << 2, ((base) >> 8) & 0xff ); \
|
|
write_pgcs_config(((cs) << 2) + 1, (base) & 0xff );
|
|
|
|
#define PNP_PGCS_CSLINE_CONF(cs, conf) \
|
|
write_pgcs_config(((cs) << 2) + 2, (conf) );
|
|
|
|
|
|
/* The following sections are for 87308 extensions to the standard compoents it emulates */
|
|
|
|
/* extensions to 16550*/
|
|
|
|
#define MCR_MDSL_MSK 0xe0 /*mode select mask*/
|
|
#define MCR_MDSL_UART 0x00 /*uart, default*/
|
|
#define MCR_MDSL_SHRPIR 0x02 /*Sharp IR*/
|
|
#define MCR_MDSL_SIR 0x03 /*SIR*/
|
|
#define MCR_MDSL_CIR 0x06 /*Consumer IR*/
|
|
|
|
#define FCR_TXFTH0 0x10 /* these bits control threshod of data level in fifo */
|
|
#define FCR_TXFTH1 0x20 /* for interrupt trigger */
|
|
|
|
/*
|
|
* Default NS87308 configuration
|
|
*/
|
|
#ifndef CONFIG_SYS_NS87308_KBC1_BASE
|
|
#define CONFIG_SYS_NS87308_KBC1_BASE 0x0060
|
|
#endif
|
|
#ifndef CONFIG_SYS_NS87308_RTC_BASE
|
|
#define CONFIG_SYS_NS87308_RTC_BASE 0x0070
|
|
#endif
|
|
#ifndef CONFIG_SYS_NS87308_FDC_BASE
|
|
#define CONFIG_SYS_NS87308_FDC_BASE 0x03F0
|
|
#endif
|
|
#ifndef CONFIG_SYS_NS87308_LPT_BASE
|
|
#define CONFIG_SYS_NS87308_LPT_BASE 0x0278
|
|
#endif
|
|
#ifndef CONFIG_SYS_NS87308_UART1_BASE
|
|
#define CONFIG_SYS_NS87308_UART1_BASE 0x03F8
|
|
#endif
|
|
#ifndef CONFIG_SYS_NS87308_UART2_BASE
|
|
#define CONFIG_SYS_NS87308_UART2_BASE 0x02F8
|
|
#endif
|
|
|
|
#endif /*_NS87308_H_*/
|