mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-25 14:10:43 +00:00
66356b4c06
Signed-off-by: Wolfgang Denk <wd@denx.de> |
||
---|---|---|
.. | ||
cpu.h | ||
durian.c | ||
Kconfig | ||
MAINTAINERS | ||
Makefile | ||
README |
Here is the step-by-step to boot U-Boot on phytium durian board. Compile U-Boot ============== > make durian_defconfig > make Get the prebuild binary about BPF ================================= > cd ../ > git clone https://github.com/phytium-durian/bpf.git Package the image ================= > cd bpf > cp ../u-boot/u-boot.bin ./ > ./dopack The fip-all.bin is the final image. Flash the image into the spi nor-flash ====================================== Any spi nor-flash and appropriate tool can be used to flash. For example, we choose the S25FL256 chip that produced from SPANSION company and EZP_XPro V1.2. Reset the board, you can get U-Boot log message from boot console: Power on... Start pcie setup! End pcie setup! Start ddr setup! End ddr setup! Jump to entrypoint: 0x500000 U-Boot 2019.10-00594-g9ccc1b17ea-dirty (Oct 18 2019 - 00:17:09 +0800) DRAM: 1.9 GiB In: uart@28001000 Out: uart@28001000 Err: uart@28001000 scanning bus for devices... Target spinup took 0 ms. SATA link 1 timeout. SATA link 2 timeout. SATA link 3 timeout. AHCI 0001.0000 32 slots 4 ports 6 Gbps 0xf impl SATA mode flags: 64bit ncq led only pmp fbss pio slum part sxs Device 0: (0:0) Vendor: ATA Prod.: ST1000DM010-2EP1 Rev: CC43 Type: Hard Disk Capacity: 953869.7 MB = 931.5 GB (1953525168 x 512) SATA link 0 timeout. SATA link 1 timeout. SATA link 2 timeout. SATA link 3 timeout. AHCI 0001.0000 32 slots 4 ports 6 Gbps 0xf impl SATA mode flags: 64bit ncq led only pmp fbss pio slum part sxs Hit any key to stop autoboot: 0 durian#