mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-12 22:33:18 +00:00
21b29fc64e
Compared to the Armada 3700, the Armada 7K and 8K are much more on the high-end side: they use a dual Cortex-A72 or a quad Cortex-A72, as opposed to the Cortex-A53 for the Armada 3700. The Armada 7K and 8K also use a fairly unique architecture, internally they are composed of several components: - One AP (Application Processor), which contains the processor itself and a few core hardware blocks. The AP used in the Armada 7K and 8K is called AP806, and is available in two configurations: dual Cortex-A72 and quad Cortex-A72. - One or two CP (Communication Processor), which contain most of the I/O interfaces (SATA, PCIe, Ethernet, etc.). The 7K family chips have one CP, while the 8K family chips integrate two CPs, providing two times the number of I/O interfaces available in the CP. The CP used in the 7K and 8K is called CP110. All in all, this gives the following combinations: - Armada 7020, which is a dual Cortex-A72 with one CP - Armada 7040, which is a quad Cortex-A72 with one CP - Armada 8020, which is a dual Cortex-A72 with two CPs - Armada 8040, which is a quad Cortex-A72 with two CPs This patch adds basic support for this ARMv8 based SoC into U-Boot. Future patches will integrate other device drivers and board support, starting with the Marvell DB-88F7040 development board. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Neta Zur Hershkovits <neta@marvell.com> Cc: Kostya Porotchkin <kostap@marvell.com> Cc: Omri Itach <omrii@marvell.com> Cc: Igal Liberman <igall@marvell.com> Cc: Haim Boot <hayim@marvell.com> Cc: Hanna Hawa <hannah@marvell.com>
81 lines
1.6 KiB
C
81 lines
1.6 KiB
C
/*
|
|
* Copyright (C) 2016 Stefan Roese <sr@denx.de>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <fdtdec.h>
|
|
#include <libfdt.h>
|
|
#include <asm/io.h>
|
|
#include <asm/system.h>
|
|
#include <asm/arch/cpu.h>
|
|
#include <asm/arch/soc.h>
|
|
#include <asm/armv8/mmu.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
/* Armada 3700 */
|
|
#define MVEBU_GPIO_NB_REG_BASE (MVEBU_REGISTER(0x13800))
|
|
|
|
#define MVEBU_TEST_PIN_LATCH_N (MVEBU_GPIO_NB_REG_BASE + 0x8)
|
|
#define MVEBU_XTAL_MODE_MASK BIT(9)
|
|
#define MVEBU_XTAL_MODE_OFFS 9
|
|
#define MVEBU_XTAL_CLOCK_25MHZ 0x0
|
|
#define MVEBU_XTAL_CLOCK_40MHZ 0x1
|
|
|
|
#define MVEBU_NB_WARM_RST_REG (MVEBU_GPIO_NB_REG_BASE + 0x40)
|
|
#define MVEBU_NB_WARM_RST_MAGIC_NUM 0x1d1e
|
|
|
|
static struct mm_region mvebu_mem_map[] = {
|
|
{
|
|
/* RAM */
|
|
.phys = 0x0UL,
|
|
.virt = 0x0UL,
|
|
.size = 0x80000000UL,
|
|
.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
|
|
PTE_BLOCK_INNER_SHARE
|
|
},
|
|
{
|
|
/* SRAM, MMIO regions */
|
|
.phys = 0xd0000000UL,
|
|
.virt = 0xd0000000UL,
|
|
.size = 0x02000000UL, /* 32MiB internal registers */
|
|
.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
|
|
PTE_BLOCK_NON_SHARE
|
|
},
|
|
{
|
|
/* List terminator */
|
|
0,
|
|
}
|
|
};
|
|
|
|
struct mm_region *mem_map = mvebu_mem_map;
|
|
|
|
void reset_cpu(ulong ignored)
|
|
{
|
|
/*
|
|
* Write magic number of 0x1d1e to North Bridge Warm Reset register
|
|
* to trigger warm reset
|
|
*/
|
|
writel(MVEBU_NB_WARM_RST_MAGIC_NUM, MVEBU_NB_WARM_RST_REG);
|
|
}
|
|
|
|
/*
|
|
* get_ref_clk
|
|
*
|
|
* return: reference clock in MHz (25 or 40)
|
|
*/
|
|
u32 get_ref_clk(void)
|
|
{
|
|
u32 regval;
|
|
|
|
regval = (readl(MVEBU_TEST_PIN_LATCH_N) & MVEBU_XTAL_MODE_MASK) >>
|
|
MVEBU_XTAL_MODE_OFFS;
|
|
|
|
if (regval == MVEBU_XTAL_CLOCK_25MHZ)
|
|
return 25;
|
|
else
|
|
return 40;
|
|
}
|